rfc:rfc9462
Internet Engineering Task Force (IETF) T. Pauly Request for Comments: 9462 E. Kinnear Category: Standards Track Apple Inc. ISSN: 2070-1721 C. A. Wood
Cloudflare
P. McManus
Fastly
T. Jensen
Microsoft
November 2023
Discovery of Designated Resolvers
Abstract
This document defines Discovery of Designated Resolvers (DDR), a set of mechanisms for DNS clients to use DNS records to discover a resolver's encrypted DNS configuration. An Encrypted DNS Resolver discovered in this manner is referred to as a "Designated Resolver". These mechanisms can be used to move from unencrypted DNS to encrypted DNS when only the IP address of a resolver is known. These mechanisms are designed to be limited to cases where Unencrypted DNS Resolvers and their Designated Resolvers are operated by the same entity or cooperating entities. It can also be used to discover support for encrypted DNS protocols when the name of an Encrypted DNS Resolver is known.
Status of This Memo
This is an Internet Standards Track document.
This document is a product of the Internet Engineering Task Force (IETF). It represents the consensus of the IETF community. It has received public review and has been approved for publication by the Internet Engineering Steering Group (IESG). Further information on Internet Standards is available in Section 2 of RFC 7841.
Information about the current status of this document, any errata, and how to provide feedback on it may be obtained at https://www.rfc-editor.org/info/rfc9462.
Copyright Notice
Copyright (c) 2023 IETF Trust and the persons identified as the document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Revised BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Revised BSD License.
Table of Contents
1. Introduction
1.1. Specification of Requirements
2. Terminology
3. DNS Service Binding Records
4. Discovery Using Resolver IP Addresses
4.1. Use of Designated Resolvers
4.1.1. Use of Designated Resolvers across Network Changes
4.2. Verified Discovery
4.3. Opportunistic Discovery
5. Discovery Using Resolver Names
6. Deployment Considerations
6.1. Caching Forwarders
6.2. Certificate Management
6.3. Server Name Handling
6.4. Handling Non-DDR Queries for resolver.arpa
6.5. Interaction with Network-Designated Resolvers
7. Security Considerations
8. IANA Considerations
8.1. Special-Use Domain Name "resolver.arpa"
8.2. Domain Name Reservation Considerations
9. References
9.1. Normative References
9.2. Informative References
Appendix A. Rationale for Using a Special-Use Domain Name
Appendix B. Rationale for Using SVCB Records
Authors' Addresses
1. Introduction
When DNS clients wish to use encrypted DNS protocols such as DNS over TLS (DoT) [RFC7858], DNS over QUIC (DoQ) [RFC9250], or DNS over HTTPS (DoH) [RFC8484], they can require additional information beyond the IP address of the DNS server, such as the resolver's hostname, alternate IP addresses, non-standard ports, or URI Templates. However, common configuration mechanisms only provide the resolver's IP address during configuration. Such mechanisms include network provisioning protocols like DHCP [RFC2132] [RFC8415] and IPv6 Router Advertisement (RA) options [RFC8106], as well as manual configuration.
This document defines two mechanisms for clients to discover Designated Resolvers that support these encrypted protocols using DNS server Service Binding (SVCB) records [RFC9460]:
1. When only an IP address of an Unencrypted DNS Resolver is known,
the client queries a Special-Use Domain Name (SUDN) [RFC6761] to
discover DNS SVCB records associated with one or more Encrypted
DNS Resolvers the Unencrypted DNS Resolver has designated for use
when support for DNS encryption is requested (Section 4).
2. When the hostname of an Encrypted DNS Resolver is known, the
client requests details by sending a query for a DNS SVCB record.
This can be used to discover alternate encrypted DNS protocols
supported by a known server, or to provide details if a resolver
name is provisioned by a network (Section 5).
Both of these approaches allow clients to confirm that a discovered Encrypted DNS Resolver is designated by the originally provisioned resolver. "Designated" in this context means that the resolvers are operated by the same entity or cooperating entities; for example, the resolvers are accessible on the same IP address, or there is a certificate that contains the IP address for the original designating resolver.
1.1. Specification of Requirements
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here.
2. Terminology
This document defines the following terms:
DDR: Discovery of Designated Resolvers. "DDR" refers to the
mechanisms defined in this document.
Designated Resolver: A resolver, presumably an Encrypted DNS
Resolver, designated by another resolver for use in its own place.
This designation can be verified with TLS certificates.
Encrypted DNS Resolver: A DNS resolver using any encrypted DNS
transport. This includes current mechanisms such as DoH, DoT, and
DoQ, as well as future mechanisms.
Unencrypted DNS Resolver: A DNS resolver using a transport without
encryption, historically TCP or UDP port 53.
3. DNS Service Binding Records
DNS resolvers can advertise one or more Designated Resolvers that may offer support over encrypted channels and are controlled by the same entity.
When a client discovers Designated Resolvers, it learns information such as the supported protocols and ports. This information is provided in ServiceMode SVCB records for DNS servers, although AliasMode SVCB records can be used to direct clients to the needed ServiceMode SVCB record per [RFC9460]. The formatting of these records, including the DNS-unique parameters such as "dohpath", are defined by [RFC9461].
The following is an example of a SVCB record describing a DoH server discovered by querying for _dns.example.net:
_dns.example.net. 7200 IN SVCB 1 example.net. (
alpn=h2 dohpath=/dns-query{?dns} )
The following is an example of a SVCB record describing a DoT server discovered by querying for _dns.example.net:
_dns.example.net. 7200 IN SVCB 1 dot.example.net (
alpn=dot port=8530 )
The following is an example of a SVCB record describing a DoQ server discovered by querying for _dns.example.net:
_dns.example.net. 7200 IN SVCB 1 doq.example.net (
alpn=doq port=8530 )
If multiple Designated Resolvers are available, using one or more encrypted DNS protocols, the resolver deployment can indicate a preference using the priority fields in each SVCB record [RFC9460].
If the client encounters a mandatory parameter in a SVCB record it does not understand, it MUST NOT use that record to discover a Designated Resolver, in accordance with Section 8 of [RFC9460]. The client can still use other records in the same response if the client can understand all of their mandatory parameters. This allows future encrypted deployments to simultaneously support protocols even if a given client is not aware of all those protocols. For example, if the Unencrypted DNS Resolver returns three SVCB records -- one for DoH, one for DoT, and one for a yet-to-exist protocol -- a client that only supports DoH and DoT should be able to use those records while safely ignoring the third record.
To avoid name lookup deadlock, clients that use Designated Resolvers need to ensure that a specific Encrypted DNS Resolver is not used for any queries that are needed to resolve the name of the resolver itself or to perform certificate revocation checks for the resolver, as described in Section 10 of [RFC8484]. Designated Resolvers need to ensure that this deadlock is avoidable, as also described in Section 10 of [RFC8484].
This document focuses on discovering DoH, DoT, and DoQ Designated Resolvers. Other protocols can also use the format defined by [RFC9461]. However, if any such protocol does not involve some form of certificate validation, new validation mechanisms will need to be defined to support validating designation as defined in Section 4.2.
4. Discovery Using Resolver IP Addresses
When a DNS client is configured with an Unencrypted DNS Resolver IP address, it SHOULD query the resolver for SVCB records of a service with a scheme of "dns" and an authority of "resolver.arpa" before making other queries. This allows the client to switch to using encrypted DNS for all other queries, if possible. Specifically, the client issues a query for _dns.resolver.arpa. with the SVCB resource record type (64) [RFC9460].
Responses to the SVCB query for the "resolver.arpa" SUDN describe Designated Resolvers. To ensure that different Designated Resolver configurations can be correctly distinguished and associated with A and AAAA records for the resolver, ServiceMode SVCB responses to these queries MUST NOT use the "." or "resolver.arpa" value for the TargetName. Similarly, clients MUST NOT perform A or AAAA queries for "resolver.arpa".
The following is an example of a SVCB record describing a DoH server discovered by querying for _dns.resolver.arpa.:
_dns.resolver.arpa. 7200 IN SVCB 1 doh.example.net (
alpn=h2 dohpath=/dns-query{?dns} )
The following is an example of a SVCB record describing a DoT server discovered by querying for _dns.resolver.arpa.:
_dns.resolver.arpa. 7200 IN SVCB 1 dot.example.net (
alpn=dot port=8530 )
The following is an example of a SVCB record describing a DoQ server discovered by querying for _dns.resolver.arpa.:
_dns.resolver.arpa. 7200 IN SVCB 1 doq.example.net (
alpn=doq port=8530 )
If the recursive resolver that receives this query has one or more Designated Resolvers, it will return the corresponding SVCB records. When responding to these special queries for "resolver.arpa", the recursive resolver SHOULD include the A and AAAA records for the name of the Designated Resolver in the Additional Answers section. This will save the DNS client an additional round trip to retrieve the address of the Designated Resolver; see Section 5 of [RFC9460].
Designated Resolvers SHOULD be accessible using the IP address families that are supported by their associated Unencrypted DNS Resolvers. If an Unencrypted DNS Resolver is accessible using an IPv4 address, it ought to provide an A record for an IPv4 address of the Designated Resolver; similarly, if it is accessible using an IPv6 address, it ought to provide a AAAA record for an IPv6 address of the Designated Resolver. The Designated Resolver MAY support more address families than the Unencrypted DNS Resolver, but it SHOULD NOT support fewer. If this is not done, clients that only have connectivity over one address family might not be able to access the Designated Resolver.
If the recursive resolver that receives this query has no Designated Resolvers, it SHOULD return NODATA for queries to the "resolver.arpa" zone, to provide a consistent and accurate signal to clients that it does not have a Designated Resolver.
4.1. Use of Designated Resolvers
When a client discovers Designated Resolvers from an Unencrypted DNS Resolver IP address, it can choose to use these Designated Resolvers either (1) automatically or (2) based on some other policy, heuristic, or user choice.
This document defines two preferred methods for automatically using Designated Resolvers:
- Verified Discovery (Section 4.2), for when a TLS certificate can
be used to validate the resolver's identity.
- Opportunistic Discovery (Section 4.3), for when a resolver's IP
address is a private or local address.
A client MAY additionally use a discovered Designated Resolver without either of these methods, based on implementation-specific policy or user input. Details of such policy are out of scope for this document. Clients MUST NOT automatically use a Designated Resolver without some sort of validation, such as the two methods defined in this document or a future mechanism. Use without validation can allow an attacker to direct traffic to an Encrypted DNS Resolver that is unrelated to the original Unencrypted DNS Resolver, as described in Section 7.
A client MUST NOT reuse a designation discovered using the IP address of one Unencrypted DNS Resolver in place of any other Unencrypted DNS Resolver. Instead, the client needs to repeat the discovery process to discover the Designated Resolver of the other Unencrypted DNS Resolver. In other words, designations are per-resolver and MUST NOT be used to configure the client's universal DNS behavior. This ensures in all cases that queries are being sent to a party designated by the resolver originally being used.
4.1.1. Use of Designated Resolvers across Network Changes
If a client is configured with the same Unencrypted DNS Resolver IP address on multiple different networks, a Designated Resolver that has been discovered on one network SHOULD NOT be reused on any of the other networks without repeating the discovery process for each network, since the same IP address may be used for different servers on the different networks.
4.2. Verified Discovery
Verified Discovery is a mechanism that allows the automatic use of a Designated Resolver that supports DNS encryption that performs a TLS handshake.
In order to be considered a verified Designated Resolver, the TLS certificate presented by the Designated Resolver needs to pass the following checks made by the client:
1. The client MUST verify the chain of certificates up to a trust
anchor as described in Section 6 of [RFC5280]. The client SHOULD
use the default system or application trust anchors, unless
otherwise configured.
2. The client MUST verify that the certificate contains the IP
address of the designating Unencrypted DNS Resolver in an
iPAddress entry of the subjectAltName extension as described in
Section 4.2.1.6 of [RFC5280].
If these checks pass, the client SHOULD use the discovered Designated Resolver for any cases in which it would have otherwise used the Unencrypted DNS Resolver, so as to prefer encrypted DNS whenever possible.
If these checks fail, the client MUST NOT automatically use the discovered Designated Resolver if this designation was only discovered via a _dns.resolver.arpa. query (if the designation was advertised directly by the network as described in Section 6.5, the server can still be used). Additionally, the client SHOULD suppress any further queries for Designated Resolvers using this Unencrypted DNS Resolver for the length of time indicated by the SVCB record's Time to Live (TTL) in order to avoid excessive queries that will lead to further failed validations. The client MAY issue new queries if the SVCB record's TTL is excessively long (as determined by client policy) to minimize the length of time an intermittent attacker can prevent the use of encrypted DNS.
If the Designated Resolver and the Unencrypted DNS Resolver share an IP address, clients MAY choose to opportunistically use the Designated Resolver even without this certificate check (Section 4.3). If the IP address is not shared, opportunistic use allows for attackers to redirect queries to an unrelated Encrypted DNS Resolver, as described in Section 7.
Connections to a Designated Resolver can use a different IP address than the IP address of the Unencrypted DNS Resolver -- for example, if the process of resolving the SVCB service yields additional addresses. Even when a different IP address is used for the connection, the TLS certificate checks described in this section still apply for the original IP address of the Unencrypted DNS Resolver.
4.3. Opportunistic Discovery
There are situations where Verified Discovery of encrypted DNS configuration over unencrypted DNS is not possible. For example, the identities of Unencrypted DNS Resolvers on private IP addresses [RFC1918], Unique Local Addresses (ULAs) [RFC4193], and Link-Local addresses [RFC3927] [RFC4291] cannot be safely confirmed using TLS certificates under most conditions.
An opportunistic privacy profile is defined for DoT in Section 4.1 of [RFC7858] as a mode in which clients do not validate the name of the resolver presented in the certificate. This opportunistic privacy profile similarly applies to DoQ [RFC9250]. For this profile, Section 4.1 of [RFC7858] explains that clients might or might not validate the resolver; however, even if clients choose to perform some certificate validation checks, they will not be able to validate the names presented in the SubjectAltName (SAN) field of the certificate for private and local IP addresses.
A client MAY use information from the SVCB record for _dns.resolver.arpa. with this opportunistic privacy profile as long as the IP address of the Encrypted DNS Resolver does not differ from the IP address of the Unencrypted DNS Resolver. Clients SHOULD use this mode only for resolvers using private or local IP addresses, since resolvers that use other addresses are able to provision TLS certificates for their addresses.
5. Discovery Using Resolver Names
A DNS client that already knows the name of an Encrypted DNS Resolver can use DDR to discover details about all supported encrypted DNS protocols. This situation can arise if a client has been configured to use a given Encrypted DNS Resolver, or if a network provisioning protocol (such as DHCP or IPv6 RAs) provides a name for an Encrypted DNS Resolver alongside the resolver IP address, such as by using Discovery of Network-designated Resolvers (DNR) [RFC9463].
For these cases, the client simply sends a DNS SVCB query using the known name of the resolver. This query can be issued to the named Encrypted DNS Resolver itself or to any other resolver. Unlike the case of bootstrapping from an Unencrypted DNS Resolver (Section 4), these records SHOULD be available in the public DNS if the same domain name's A or AAAA records are available in the public DNS to allow using any resolver to discover another resolver's Designated Resolvers. When the name can only be resolved in private namespaces, these records SHOULD be available to the same audience as the A and AAAA records.
For example, if the client already knows about a DoT server resolver.example.com, it can issue a SVCB query for _dns.resolver.example.com to discover if there are other encrypted DNS protocols available. In the following example, the SVCB answers indicate that resolver.example.com supports both DoH and DoT and that the DoH server indicates a higher priority than the DoT server.
_dns.resolver.example.com. 7200 IN SVCB 1 resolver.example.com. (
alpn=h2 dohpath=/dns-query{?dns} )
_dns.resolver.example.com. 7200 IN SVCB 2 resolver.example.com. (
alpn=dot )
Clients MUST validate that for any Encrypted DNS Resolver discovered using a known resolver name, the TLS certificate of the resolver contains the known name in a subjectAltName extension. In the example above, this means that both servers need to have certificates that cover the name resolver.example.com. Often, the various supported encrypted DNS protocols will be specified such that the SVCB TargetName matches the known name, as is true in the example above. However, even when the TargetName is different (for example, if the DoH server had a TargetName of doh.example.com), the clients still check for the original known resolver name in the certificate.
Note that this resolver validation is not related to the DNS resolver that provided the SVCB answer.
As another example, being able to discover a Designated Resolver for a known Encrypted DNS Resolver is useful when a client has a DoT configuration for foo.resolver.example.com but is on a network that blocks DoT traffic. The client can still send a query to any other accessible resolver (either the local network resolver or an accessible DoH server) to discover if there is a designated DoH server for foo.resolver.example.com.
6. Deployment Considerations
Resolver deployments that support DDR are advised to consider the following points.
6.1. Caching Forwarders
A DNS forwarder SHOULD NOT forward queries for "resolver.arpa" (or any subdomains) upstream. This prevents a client from receiving a SVCB record that will fail to authenticate because the forwarder's IP address is not in the SubjectAltName (SAN) field of the upstream resolver's Designated Resolver's TLS certificate. A DNS forwarder that already acts as a completely transparent forwarder MAY choose to forward these queries when the operator expects that this does not apply, because the operator either knows that the upstream resolver does have the forwarder's IP address in its TLS certificate's SAN field or expects clients to validate the connection via some future mechanism.
Operators who choose to forward queries for "resolver.arpa" upstream should note that client behavior is never guaranteed and that the use of DDR by a resolver does not communicate a requirement for clients to use the SVCB record when it cannot be verified.
6.2. Certificate Management
Resolver owners that support Verified Discovery will need to list valid referring IP addresses in their TLS certificates. This may pose challenges for resolvers with a large number of referring IP addresses.
6.3. Server Name Handling
Clients MUST NOT use "resolver.arpa" as the server name in either (1) the TLS Server Name Indication (SNI) [RFC8446] for DoT, DoQ, or DoH connections or (2) the URI host for DoH requests.
When performing discovery using resolver IP addresses, clients MUST use the original IP address of the Unencrypted DNS Resolver as the URI host for DoH requests.
Note that since IP addresses are not supported by default in the TLS SNI, resolvers that support discovery using IP addresses will need to be configured to present the appropriate TLS certificate when no SNI is present for DoT, DoQ, and DoH.
6.4. Handling Non-DDR Queries for resolver.arpa
DNS resolvers that support DDR by responding to queries for _dns.resolver.arpa. MUST treat resolver.arpa as a locally served zone per [RFC6303]. In practice, this means that resolvers SHOULD respond to queries of any type other than SVCB for _dns.resolver.arpa. with NODATA and queries of any type for any domain name under resolver.arpa with NODATA.
6.5. Interaction with Network-Designated Resolvers
DNR [RFC9463] allows a network to provide designation of resolvers directly through DHCP [RFC2132] [RFC8415] and through IPv6 RA options [RFC8106]. When such indications are present, clients can suppress queries for "resolver.arpa" to the unencrypted DNS server indicated by the network over DHCP or RAs, and the DNR indications SHOULD take precedence over those discovered using "resolver.arpa" for the same resolver if there is a conflict, since DNR is considered a more reliable source.
The Designated Resolver information in DNR might not contain a full set of SvcParams needed to connect to an Encrypted DNS Resolver. In such a case, the client can use a SVCB query using a resolver name, as described in Section 5, to the Authentication Domain Name (ADN).
7. Security Considerations
Since clients can receive DNS SVCB answers over unencrypted DNS, on- path attackers can prevent successful discovery by dropping SVCB queries or answers and thus can prevent clients from switching to using encrypted DNS. Clients should be aware that it might not be possible to distinguish between resolvers that do not have any Designated Resolver and such an active attack. To limit the impact of discovery queries being dropped either maliciously or unintentionally, clients can re-send their SVCB queries periodically.
Section 8.2 of [RFC9461] describes another type of downgrade attack where an attacker can block connections to the encrypted DNS server. For DDR, clients need to validate a Designated Resolver using a connection to the server before trusting it, so attackers that can block these connections can prevent clients from switching to using encrypted DNS.
Encrypted DNS Resolvers that allow discovery using DNS SVCB answers over unencrypted DNS MUST NOT provide differentiated behavior based solely on metadata in the SVCB record, such as the HTTP path or alternate port number, which are parameters that an attacker could modify. For example, if a DoH resolver provides a filtering service for one URI path and a non-filtered service for another URI path, an attacker could select which of these services is used by modifying the "dohpath" parameter. These attacks can be mitigated by providing separate resolver IP addresses or hostnames.
While the IP address of the Unencrypted DNS Resolver is often provisioned over insecure mechanisms, it can also be provisioned securely, such as via manual configuration, on a VPN, or on a network with protections like RA-Guard [RFC6105]. An attacker might try to direct encrypted DNS traffic to itself by causing the client to think that a discovered Designated Resolver uses a different IP address from the Unencrypted DNS Resolver. Such a Designated Resolver might have a valid certificate but might be operated by an attacker that is trying to observe or modify user queries without the knowledge of the client or network.
If the IP address of a Designated Resolver differs from that of an Unencrypted DNS Resolver, clients applying Verified Discovery (Section 4.2) MUST validate that the IP address of the Unencrypted DNS Resolver is covered by the SubjectAltName (SAN) of the Designated Resolver's TLS certificate. If that validation fails, the client MUST NOT automatically use the discovered Designated Resolver.
Clients using Opportunistic Discovery (Section 4.3) MUST be limited to cases where the Unencrypted DNS Resolver and Designated Resolver have the same IP address, which SHOULD be a private or local IP address. Clients that do not follow Opportunistic Discovery (Section 4.3) and instead try to connect without first checking for a designation run the possible risk of being intercepted by an attacker hosting an Encrypted DNS Resolver on an IP address of an Unencrypted DNS Resolver where the attacker has failed to gain control of the Unencrypted DNS Resolver.
The constraints on the use of Designated Resolvers specified here apply specifically to the automatic discovery mechanisms defined in this document, which are referred to as Verified Discovery and Opportunistic Discovery. Clients MAY use some other mechanism to verify and use Designated Resolvers discovered using the DNS SVCB record. However, the use of such an alternate mechanism needs to take into account the attack scenarios detailed here.
8. IANA Considerations
8.1. Special-Use Domain Name "resolver.arpa"
IANA has registered "resolver.arpa" in the "Special-Use Domain Names" registry established by [RFC6761].
IANA has added an entry in the "Transport-Independent Locally-Served DNS Zone Registry" for 'resolver.arpa.' with the description "DNS Resolver Special-Use Domain" and listed this document as the reference.
8.2. Domain Name Reservation Considerations
In accordance with Section 5 of [RFC6761], the answers to the following questions are provided relative to this document:
1. Are human users expected to recognize these names as special and
use them differently? In what way?
No. This name is used automatically by DNS stub resolvers
running on client devices on behalf of users, and users will
never see this name directly.
2. Are writers of application software expected to make their
software recognize these names as special and treat them
differently? In what way?
No. There is no use case where a non-DNS application (covered by
the next question) would need to use this name.
3. Are writers of name resolution APIs and libraries expected to
make their software recognize these names as special and treat
them differently? If so, how?
Yes. DNS client implementors are expected to use this name when
querying for a resolver's properties instead of records for the
name itself. DNS servers are expected to respond to queries for
this name with their own properties instead of checking the
matching zone as it would for normal domain names.
4. Are developers of caching domain name servers expected to make
their implementations recognize these names as special and treat
them differently? If so, how?
Yes. Caching domain name servers should not forward queries for
this name, to avoid causing validation failures due to IP address
mismatch.
5. Are developers of authoritative domain name servers expected to
make their implementations recognize these names as special and
treat them differently? If so, how?
No. DDR is designed for use by recursive resolvers.
Theoretically, an authoritative server could choose to support
this name if it wants to advertise support for encrypted DNS
protocols over plaintext DNS, but that scenario is covered by
other work in the IETF DNSOP Working Group.
6. Does this reserved Special-Use Domain Name have any potential
impact on DNS server operators? If they try to configure their
authoritative DNS server as authoritative for this reserved name,
will compliant name server software reject it as invalid? Do DNS
server operators need to know about that and understand why?
Even if the name server software doesn't prevent them from using
this reserved name, are there other ways that it may not work as
expected, of which the DNS server operator should be aware?
This name is locally served, and any resolver that supports this
name should never forward the query. DNS server operators should
be aware that records for this name will be used by clients to
modify the way they connect to their resolvers.
7. How should DNS Registries/Registrars treat requests to register
this reserved domain name? Should such requests be denied?
Should such requests be allowed, but only to a specially
designated entity?
IANA holds the registration for this name. Non-IANA requests to
register this name should always be denied by DNS Registries/
Registrars.
9. References
9.1. Normative References
[RFC1918] Rekhter, Y., Moskowitz, B., Karrenberg, D., de Groot, G.
J., and E. Lear, "Address Allocation for Private
Internets", BCP 5, RFC 1918, DOI 10.17487/RFC1918,
February 1996, <https://www.rfc-editor.org/info/rfc1918>.
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119,
DOI 10.17487/RFC2119, March 1997,
<https://www.rfc-editor.org/info/rfc2119>.
[RFC3927] Cheshire, S., Aboba, B., and E. Guttman, "Dynamic
Configuration of IPv4 Link-Local Addresses", RFC 3927,
DOI 10.17487/RFC3927, May 2005,
<https://www.rfc-editor.org/info/rfc3927>.
[RFC4193] Hinden, R. and B. Haberman, "Unique Local IPv6 Unicast
Addresses", RFC 4193, DOI 10.17487/RFC4193, October 2005,
<https://www.rfc-editor.org/info/rfc4193>.
[RFC4291] Hinden, R. and S. Deering, "IP Version 6 Addressing
Architecture", RFC 4291, DOI 10.17487/RFC4291, February
2006, <https://www.rfc-editor.org/info/rfc4291>.
[RFC5280] Cooper, D., Santesson, S., Farrell, S., Boeyen, S.,
Housley, R., and W. Polk, "Internet X.509 Public Key
Infrastructure Certificate and Certificate Revocation List
(CRL) Profile", RFC 5280, DOI 10.17487/RFC5280, May 2008,
<https://www.rfc-editor.org/info/rfc5280>.
[RFC6303] Andrews, M., "Locally Served DNS Zones", BCP 163,
RFC 6303, DOI 10.17487/RFC6303, July 2011,
<https://www.rfc-editor.org/info/rfc6303>.
[RFC6761] Cheshire, S. and M. Krochmal, "Special-Use Domain Names",
RFC 6761, DOI 10.17487/RFC6761, February 2013,
<https://www.rfc-editor.org/info/rfc6761>.
[RFC7858] Hu, Z., Zhu, L., Heidemann, J., Mankin, A., Wessels, D.,
and P. Hoffman, "Specification for DNS over Transport
Layer Security (TLS)", RFC 7858, DOI 10.17487/RFC7858, May
2016, <https://www.rfc-editor.org/info/rfc7858>.
[RFC8174] Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC
2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174,
May 2017, <https://www.rfc-editor.org/info/rfc8174>.
[RFC8484] Hoffman, P. and P. McManus, "DNS Queries over HTTPS
(DoH)", RFC 8484, DOI 10.17487/RFC8484, October 2018,
<https://www.rfc-editor.org/info/rfc8484>.
[RFC9250] Huitema, C., Dickinson, S., and A. Mankin, "DNS over
Dedicated QUIC Connections", RFC 9250,
DOI 10.17487/RFC9250, May 2022,
<https://www.rfc-editor.org/info/rfc9250>.
[RFC9460] Schwartz, B., Bishop, M., and E. Nygren, "Service Binding
and Parameter Specification via the DNS (SVCB and HTTPS
Resource Records)", RFC 9460, DOI 10.17487/RFC9460,
November 2023, <https://www.rfc-editor.org/info/rfc9460>.
[RFC9461] Schwartz, B., "Service Binding Mapping for DNS Servers",
RFC 9461, DOI 10.17487/RFC9461, November 2023,
<https://www.rfc-editor.org/info/rfc9461>.
[RFC9463] Boucadair, M., Ed., Reddy.K, T., Ed., Wing, D., Cook, N.,
and T. Jensen, "DHCP and Router Advertisement Options for
the Discovery of Network-designated Resolvers (DNR)",
RFC 9463, DOI 10.17487/RFC9463, November 2023,
<https://www.rfc-editor.org/info/rfc9463>.
9.2. Informative References
[DoH-HINTS]
Schinazi, D., Sullivan, N., and J. Kipp, "DoH Preference
Hints for HTTP", Work in Progress, Internet-Draft, draft-
schinazi-httpbis-doh-preference-hints-02, 13 July 2020,
<https://datatracker.ietf.org/doc/html/draft-schinazi-
httpbis-doh-preference-hints-02>.
[ECH] Rescorla, E., Oku, K., Sullivan, N., and C. A. Wood, "TLS
Encrypted Client Hello", Work in Progress, Internet-Draft,
draft-ietf-tls-esni-17, 9 October 2023,
<https://datatracker.ietf.org/doc/html/draft-ietf-tls-
esni-17>.
[RFC2132] Alexander, S. and R. Droms, "DHCP Options and BOOTP Vendor
Extensions", RFC 2132, DOI 10.17487/RFC2132, March 1997,
<https://www.rfc-editor.org/info/rfc2132>.
[RFC6105] Levy-Abegnoli, E., Van de Velde, G., Popoviciu, C., and J.
Mohacsi, "IPv6 Router Advertisement Guard", RFC 6105,
DOI 10.17487/RFC6105, February 2011,
<https://www.rfc-editor.org/info/rfc6105>.
[RFC8106] Jeong, J., Park, S., Beloeil, L., and S. Madanapalli,
"IPv6 Router Advertisement Options for DNS Configuration",
RFC 8106, DOI 10.17487/RFC8106, March 2017,
<https://www.rfc-editor.org/info/rfc8106>.
[RFC8415] Mrugalski, T., Siodelski, M., Volz, B., Yourtchenko, A.,
Richardson, M., Jiang, S., Lemon, T., and T. Winters,
"Dynamic Host Configuration Protocol for IPv6 (DHCPv6)",
RFC 8415, DOI 10.17487/RFC8415, November 2018,
<https://www.rfc-editor.org/info/rfc8415>.
[RFC8446] Rescorla, E., "The Transport Layer Security (TLS) Protocol
Version 1.3", RFC 8446, DOI 10.17487/RFC8446, August 2018,
<https://www.rfc-editor.org/info/rfc8446>.
[RFC8880] Cheshire, S. and D. Schinazi, "Special Use Domain Name
'ipv4only.arpa'", RFC 8880, DOI 10.17487/RFC8880, August
2020, <https://www.rfc-editor.org/info/rfc8880>.
Appendix A. Rationale for Using a Special-Use Domain Name
The "resolver.arpa" SUDN is similar to "ipv4only.arpa" in that the querying client is not interested in an answer from the authoritative "arpa" name servers. The intent of the SUDN is to allow clients to communicate with the Unencrypted DNS Resolver much like "ipv4only.arpa" allows for client-to-middlebox communication. For more context, see [RFC8880] for the rationale behind "ipv4only.arpa".
Appendix B. Rationale for Using SVCB Records
These mechanisms use SVCB/HTTPS resource records [RFC9460] to communicate that a given domain designates a particular Designated Resolver for clients to use in place of an Unencrypted DNS Resolver (using a SUDN) or another Encrypted DNS Resolver (using its domain name).
There are various other proposals for how to provide similar functionality. There are several reasons that these mechanisms have chosen SVCB records:
- Discovering Encrypted DNS Resolvers using DNS records keeps client
logic for DNS self-contained and allows a DNS resolver operator to
define which resolver names and IP addresses are related to one
another.
- Using DNS records also does not rely on bootstrapping with higher-
level application operations (such as those discussed in
[DoH-HINTS]).
- SVCB records are extensible and allow the definition of parameter
keys, making them a superior mechanism for extensibility as
compared to approaches such as overloading TXT records. The same
keys can be used for discovering Designated Resolvers of different
transport types as well as those advertised by Unencrypted DNS
Resolvers or another Encrypted DNS Resolver.
- Clients and servers that are interested in privacy of names will
already need to support SVCB records in order to use the TLS
Encrypted ClientHello [ECH]. Without encrypting names in TLS, the
value of encrypting DNS is reduced, so pairing the solutions
provides the greatest benefit.
Authors' Addresses
Tommy Pauly Apple Inc. One Apple Park Way Cupertino, California 95014 United States of America Email: tpauly@apple.com
Eric Kinnear Apple Inc. One Apple Park Way Cupertino, California 95014 United States of America Email: ekinnear@apple.com
Christopher A. Wood Cloudflare 101 Townsend St San Francisco, California 94107 United States of America Email: caw@heapingbits.net
Patrick McManus Fastly Email: mcmanus@ducksong.com
Tommy Jensen Microsoft Email: tojens@microsoft.com
/home/gen.uk/domains/wiki.gen.uk/public_html/data/pages/rfc/rfc9462.txt · Last modified: 2023/11/06 21:54 by 127.0.0.1