GENWiki

Premier IT Outsourcing and Support Services within the UK

User Tools

Site Tools


rfc:rfc3591

Network Working Group H-K. Lam Request for Comments: 3591 Lucent Technologies Category: Standards Track M. Stewart

                                                       Dorado Software
                                                              A. Huynh
                                                        Cetus Networks
                                                        September 2003
   Definitions of Managed Objects for the Optical Interface Type

Status of this Memo

 This document specifies an Internet standards track protocol for the
 Internet community, and requests discussion and suggestions for
 improvements.  Please refer to the current edition of the "Internet
 Official Protocol Standards" (STD 1) for the standardization state
 and status of this protocol.  Distribution of this memo is unlimited.

Copyright Notice

 Copyright (C) The Internet Society (2003).  All Rights Reserved.

Abstract

 This memo defines a portion of the Management Information Base (MIB)
 for use with Simple Network Management Protocol (SNMP) in TCP/IP-
 based internets.  In particular, it defines objects for managing
 Optical Interfaces associated with WavelengthDivision Multiplexing
 systems or characterized by the Optical Transport Network (OTN) in
 accordance with the OTN architecture defined in ITU-T Recommendation
 G.872.
 The MIB module defined in this memo can be used for performance
 monitoring and/or configuration of such optical interface.

Lam, et al. Standards Track [Page 1] RFC 3591 Optical Interface Type MIB September 2003

Table of Contents

 1.  The Internet-Standard Management Framework .................   2
 2.  Overview ...................................................   3
      2.1.  Use of the ifTable ..................................   3
      2.2.  Use of ifTable for OTN OTS/OMS Layer.................   8
      2.3.  Use of ifTable for OTN OChGroup Layer................   9
      2.4.  Use of ifTable for OTN OCh Layer.....................  10
      2.5.  Use of ifStackTable..................................  12
      2.6.  Optical Network Terminology .........................  13
      2.7.  Tandem Connection Monitoring (TCM) ..................  20
 3.  Structure of the MIB........................................  21
      3.1.  The optIfOTMn group..................................  23
      3.2.  The optIfPerfMon group...............................  24
      3.3.  The optIfOTSn groups.................................  24
      3.4.  The optIfOMSn groups.................................  25
      3.5.  The optIfOChGroup groups.............................  26
      3.6.  The optIfOCh groups..................................  27
      3.7.  The optIfOTUk groups.................................  28
      3.8.  The optIfODUk groups.................................  29
      3.9.  The optIfODUkT groups................................  30
 4.  Object Definitions .........................................  30
 5.  Security Considerations .................................... 167
 6.  Acknowledgments............................................. 169
 7.  References ................................................. 169
     7.1.  Normative References ................................. 169
     7.2.  Informative References ............................... 171
 8.  Intellectual Property Statement ............................ 171
 9.  Authors' Addresses ......................................... 172
 10. Full Copyright Statement ................................... 173

1. The Internet-Standard Management Framework

 For a detailed overview of the documents that describe the current
 Internet-Standard Management Framework, please refer to section 7 of
 RFC 3410 [RFC3410].
 Managed objects are accessed via a virtual information store, termed
 the Management Information Base or MIB.  MIB objects are generally
 accessed through the Simple Network Management Protocol (SNMP).
 Objects in the MIB are defined using the mechanisms defined in the
 Structure of Management Information (SMI).  This memo specifies a MIB
 module that is compliant to the SMIv2, which is described in STD 58,
 RFC 2578 [RFC2578], STD 58, RFC 2579 [RFC2579] and STD 58, RFC 2580
 [RFC2580].

Lam, et al. Standards Track [Page 2] RFC 3591 Optical Interface Type MIB September 2003

2. Overview

 In this document, the term OTN (Optical Transport Network) system is
 used to describe devices that are compliant with the requirements
 specified in the ITU-T Recommendations G.872 [ITU-T G.872], G.709
 [ITU-T G.709], G.798 [ITU-T G.798], G.874 [ITU-T G.874], and G.874.1
 [ITU-T G.874.1].
 The optical objects will be managed using the MIB II ifTable and
 ifStackTable.  Additional tables will also be supported to monitor
 layer specific status and provide performance monitoring data.  In
 the tables, some entries are required for OTN systems only.  A
 Configuration (Config) table, Current Performance Monitoring (PM)
 table, and Interval PM table will be maintained for the OTSn, OMSn,
 OChGroup, and OCh layers on a source and sink trail termination
 basis.  These tables will be linked to the ifTable by using the
 ifIndex that is associated with that layer.
 These objects are used when the particular media being used to
 realize an interface is an Optical Transport interface.  At present,
 this applies to these values of the ifType variable in the Internet-
 standard MIB:
 opticalChannel (195), opticalChannelGroup (219), opticalTransport
 (196)
 The definitions contained herein are based on the OTN specifications
 in ITU-T G.872[ITU-T G.872], G.709 [ITU-T G.709], G.798[ITU-T G.798],
 G.874[ITU-T G.874], and G.874.1 [ITU-T G.874.1].

2.1. Use of the ifTable

 This section specifies how the MIB II interfaces group, as defined in
 RFC 2863 [RFC2863], is used for optical interfaces.  Only the
 ifGeneralInformationGroup will be supported for the ifTable and the
 ifStackTable to maintain the relationship between the various layers.
 The OTN layers are managed in the ifTable using IfEntries that
 correlate to the layers depicted in Figure 1.
 For example, a DWDM device with an Optical Network Node Interface
 (ONNI) will have an Optical Transmission Section (OTS) physical
 layer, an Optical Multiplex Section (OMS) layer (transports multiple
 optical channels), and an Optical Channel (OCh) layer.  There is a
 one to one relationship between the OMS and OTS layers.  The OMS
 layer has fixed connectivity via the OTS and thus no connectivity
 flexibility at the OMS layer is supported.

Lam, et al. Standards Track [Page 3] RFC 3591 Optical Interface Type MIB September 2003

 A device with an ONNI that does not multiplex would consist of the
 OTS and OCh layers supporting a single channel.
 MIB-II (RFC 1213) [RFC1213], as amended and extended by RFC 3418
 [RFC3418], RFC 2863 [RFC2863], and RFC 2864 [RFC2864], accommodates
 these cases through appropriate use of the system and interfaces
 groups.  The system group names and describes the type of managed
 resource.  The interfaces group defines which OTN layers exist and
 how these layers are configured and multiplexed.  This is achieved by
 proper representation of OTN Layers as IfEntries as defined in RFC
 2863 [RFC2863], as follows.
 In the following figures, opticalChannel and opticalTransport are
 abbreviated as och and otn respectively.
 _____________________
                      \
    Path Data Unit    |\
        (ODUk)        | \
 _____________________|  \ ______________________
                      |   |                      |  >
   Tandem Data Unit   |   |                      |  |
        (ODUkT)       |   |    OCh  Layer        |   > n och IfEntries
 _____________________|   |                      |  |
                      |   |______________________|  >
         Optical      |  /|                      |  >
     Transport Unit   | / |                      |  |
         (OTUk)       |/  |    OMSn Layer        |  |
 _____________________/   |                      |  |
                          |______________________|  |
    Sub-layers in         |                      |   > m otn IfEntries
    the OCh Layer         |                      |  |
                          |    OTSn Layer        |  |
                          |                      |  |
                          |______________________|  >
                       Figure 1: OTN Layers
 Since the OMSn and OTSn layers have a one to one relationship, only
 one otn IfEntry is required to support these two layers.  Therefore,
 each opticalChannel IfEntry may be mapped to m opticalTransport
 IfEntries, where m is greater than or equal to 1.  Conversely, each
 opticalTransport entry may be mapped to n opticalChannel IfEntries,
 where n is greater than or equal to 1.
 There are implementations that have banded amplifers that operate on
 a group of optical channels separately (e.g., C and L band channels)
 before finally muxing them together and transporting them over a

Lam, et al. Standards Track [Page 4] RFC 3591 Optical Interface Type MIB September 2003

 physical layer.  For such DWDM system implementations, it is
 important to have the ability to model each of the groups (or bands)
 with an ifIndex and measure the pre-OTN PM parameters for each band
 separately.
 The OTN layering, as described in Figure 1, can be extended to
 accomodate such implementations by introducing another layer called
 the OChGroup Layer.
 As an example, Figure 2 depicts the OTN layering of a DWDM system
 with 80 C-band and 80 L-band channels combined into their respective
 channel band groups before being muxed into the OMS and transported
 over the OTS.
                 _________    ____________
                |O|O|  |O |  |O |O |  |O  | >
                |C|C|  |C |  |C |C |  |C  | |
                |h|h|..|h |  |h |h |..|h  |  > x och IfEntries
                |1|2|  |80|  |81|82|  |160| |
                |_|_|__|__|  |__|__|__|___| >
                |         |  |            | >
                |         |  |            | |
                |OChGroup1|  | OChGroup2  |  > n ochgroup IfEntries
                |         |  |            | |
                |_________|__|____________| >
                |                         | >
                |                         | |
                |        OMSn Layer       | |
                |                         | |
                |_________________________| |
                |                         |  > m otn IfEntries
                |                         | |
                |        OTSn Layer       | |
                |                         | |
                |_________________________| >
           Figure 2: OTN Layers for a Banded Configuration
 If an implementation does not wish to model the banded configuration,
 the OChGroup layer is absent and the OTN layering model degenerates
 to the description in Figure 1.  In other words, when there is an
 amplifier that covers the whole band, the optIfOMSn objects should be
 used, rather than using the optIfOChGroup objects with a degenerate
 group that covers all channels.
 The design of the Optical Interface MIB provides the option to model
 an interface either as a single bidirectional object containing both
 sink and source functions or as a pair of unidirectional objects, one
 containing sink functions and the other containing source functions.

Lam, et al. Standards Track [Page 5] RFC 3591 Optical Interface Type MIB September 2003

 If the sink and source for a given protocol layer are to be modelled
 as separate objects, then there need to be two ifTable entries, one
 that corresponds to the sink and one that corresponds to the source,
 where the directionality information is provided in the configuration
 tables for that layer via the xxxDirectionality objects.  The agent
 is expected to maintain consistent directionality values between
 ifStackTable layers (e.g., a sink must not be stacked in a 1:1 manner
 on top of a source, or vice-versa), and all protocol layers that are
 represented by a given ifTable entry are expected to have the same
 directionality (i.e., instances of optIfOTSnDirectionality and
 optIfOMSnDirectionality that correspond to a given ifIndex value must
 have the same value, and instances of optIfOChDirectionality,
 optIfOTUkDirectionality, and optIfODUkDirectionality that correspond
 to a given ifIndex value must have the same value).
 When separate ifTable entries are used for the source and sink
 functions of a given physical interface, association between the two
 uni-directional ifTable entries (one for the source function and the
 other for the sink functions) should be provided.  It is recommended
 that identical ifName values are used for the two ifTable entries to
 indicate such association.  An implementation shall explicitly state
 what mechanism is used to indicate the association, if ifName is not
 used.
 Example 1: Management of unterminated opticalChannel (och) using
            passive optics
    An OTN device connected with two adjacent nodes in a single fiber
    ring that supports 10 wavelengths per fiber would have 2
    opticalTransport IfEntries and 20 opticalChannel IfEntries, as
    depicted in Figure 3.  Thus 10 opticalChannel IfEntries are
    stacked above the first opticalTransport IfEntry, and the other 10
    opticalChannel IfEntries are stacked above the second
    opticalTransport IfEntry.  Note that the optical channels in this
    example are un-terminated, and thus no OTUk objects will be
    instantiated for these optical channels.  The opticalChannel
    IfEntries of one otn may be dropped/added from/to the OTN device
    or cross-connected with the opticalChannel IfEntries of the other
    otn.  Cross-connection from a member of the first 10
    opticalChannel IfEntries to a member of the second 10
    opticalChannel IfEntries could be modelled by using a cross-
    connect object, which is not yet defined in this version of the
    MIB.

Lam, et al. Standards Track [Page 6] RFC 3591 Optical Interface Type MIB September 2003

  ______________________                      ______________________
 |       |      |       |                    |       |      |       |
 | och1  | ...  | och10 |                    | och11 | ...  | och20 |
 |_______|______|_______|                    |_______|______|_______|
 |                      |                    |                      |
 |         otn1         |                    |         otn2         |
 |______________________|                    |______________________|
                             ____________
                            |            |
        ___________________\|    OTN     |__________________\
                           /|   device   |                  /
                            |____________|
        Figure 3: Interface stacks when channels are unterminated
 Example 2: Management of terminated opticalChannel (och) interfaces
    An OTN device connected with two adjacent nodes in a single fiber
    ring that supports 10 wavelengths per fiber would have 2
    opticalTransport IfEntries and 20 opticalChannel IfEntries, as
    depicted in Figure 4.  Thus 10 opticalChannel IfEntries are
    stacked above the first opticalTransport IfEntry, and the other 10
    opticalChannel IfEntries are stacked above the second
    opticalTransport IfEntry.  As the optical channels in this example
    are terminated, OTUk objects and possibly ODUk objects will be
    instantiated for the terminated opticalChannel IfEntries.
  ______________________                      ______________________
 |       |      |       |                    |       |      |       |
 | och1  | ...  | och10 |                    | och11 | ...  | och20 |
 |_______|______|_______|                    |_______|______|_______|
 |                      |                    |                      |
 |         otn1         |                    |         otn2         |
 |______________________|                    |______________________|
                             ____________
                            |            |
        ___________________\|    OTN     |__________________\
                           /|   device   |                  /
                            |____________|
        Figure 4: Interface stacks when channels are terminated
 Note that the two examples described above depict the interface
 stacks when the banded configuration is not modeled.

Lam, et al. Standards Track [Page 7] RFC 3591 Optical Interface Type MIB September 2003

 The exact configuration and multiplexing of the layers is maintained
 in the ifStackTable (RFC 2863) [RFC2863] and in the ifInvStackTable
 (RFC 2864) [RFC2864];  see section 2.5 for details.

2.2. Use of ifTable for OTN OTS/OMS Layer

 Only the ifGeneralInformationGroup needs to be supported.
 ifTable Object      Use for combined OTN OTS/OMS Layer
 =====================================================================
  ifIndex             The interface index.
  ifDescr             Optical Transport Network (OTN) Optical
                      Transmission Section (OTS)/Optical Multiplex
                      Section (OMS)
  ifType              opticalTransport (196)
  ifSpeed             Actual bandwidth of the interface in bits per
                      second.  If the bandwidth of the interface is
                      greater than the maximum value of 4,294,967,295,
                      then the maximum value is reported and
                      ifHighSpeed must be used to report the
                      interface's speed.
  ifPhysAddress       An octet string with zero length.  (There is
                      no specific address associated with the
                      interface.)
  ifAdminStatus       The desired administrative status of the
                      interface.  Supports read-only access.
  ifOperStatus        The operational status of the interface.  The
                      value lowerLayerDown(7) is not used, since
                      there is no lower layer interface.  This object
                      is set to notPresent(6) if a component is
                      missing, otherwise it is set to down(2) if
                      either of the objects optIfOTSnCurrentStatus or
                      optIfOMSnCurrentStatus indicates that any
                      defect is present.
  ifLastChange        The value of sysUpTime at the last change in
                      ifOperStatus.

Lam, et al. Standards Track [Page 8] RFC 3591 Optical Interface Type MIB September 2003

  ifName              Enterprise-specific convention (e.g., TL-1 AID)
                      to identify the physical or data entity
                      associated with this interface or an
                      OCTET STRING of zero length.  The
                      enterprise-specific convention is intended to
                      provide the means to reference one or more
                      enterprise-specific tables.
  ifLinkUpDownTrapEnable  Default value is enabled(1).  Supports
                          read-only access.
  ifHighSpeed         Actual bandwidth of the interface in Mega-bits
                      per second.  A value of n represents a range of
                      'n-0.5' to 'n+0.499999'.
  ifConnectorPresent  Set to true(1).
  ifAlias             The (non-volatile) alias name for this interface
                      as assigned by the network manager.

2.3. Use of ifTable for OTN OChGroup Layer

 Only the ifGeneralInformationGroup needs to be supported.
 ifTable Object      Use for OTN OChGroup Layer
 =====================================================================
  ifIndex             The interface index.
  ifDescr             Optical Transport Network (OTN) Optical
                      Channel Group (OChGroup)
  ifType              opticalChannelGroup(219)
  ifSpeed             Current bandwidth of the interface in bits per
                      second.  If the bandwidth of the interface is
                      greater than the maximum value of 4,294,967,295,
                      then the maximum value is reported and
                      ifHighSpeed must be used to report the
                      interface's speed.
  ifPhysAddress       A string that specifies the range of wavelengths
                      in the format of w1-w2, where w1 and w2 are the
                      lower and upper end of the wavelength range,
                      both in ASCII decimal digits expressed in
                      nanometers (e.g., 1350-1650)

Lam, et al. Standards Track [Page 9] RFC 3591 Optical Interface Type MIB September 2003

  ifAdminStatus       The desired administrative status of the
                      interface.  Supports read-only access.
  ifOperStatus        The operational status of the interface.  This
                      object is set to lowerLayerDown(7) if the
                      ifOperStatus of its otn interface is down(2).
                      Otherwise, it is set to down(2) if the
                      amplifier for this band is unable to carry
                      traffic.
  ifLastChange        The value of sysUpTime at the last change in
                      ifOperStatus.
  ifName              Enterprise-specific convention (e.g., TL-1 AID)
                      to identify the physical or data entity
                      associated with this interface or an
                      OCTET STRING of zero length.  The
                      enterprise-specific convention is
                      intended to provide the means to reference one
                      or more enterprise-specific tables.
  ifLinkUpDownTrapEnable  Default value is disabled(2).  Supports
                          read-only access.
  ifHighSpeed         Current bandwidth of the interface in Mega-bits
                      per second.  A value of n represents a range of
                      'n-0.5' to 'n+0.499999'.
  ifConnectorPresent  Set to false(2).
  ifAlias             The (non-volatile) alias name for this interface
                      as assigned by the network manager.

2.4. Use of ifTable for OTN OCh Layer

 Only the ifGeneralInformationGroup needs to be supported.
 ifTable Object      Use for OTN OCh Layer
 =====================================================================
  ifIndex             The interface index.
  ifDescr             Optical Transport Network (OTN) Optical
                      Channel (OCh)
  ifType              opticalChannel(195)

Lam, et al. Standards Track [Page 10] RFC 3591 Optical Interface Type MIB September 2003

  ifSpeed             Current bandwidth of the interface in bits per
                      second.  If the bandwidth of the interface is
                      greater than the maximum value of 4,294,967,295,
                      then the maximum value is reported and
                      ifHighSpeed must be used to report the
                      interface's speed.
  ifPhysAddress       A string of ASCII decimal digits containing the
                      wavelength of the optical channel, expressed
                      in nanometers (e.g., 1550).
  ifAdminStatus       The desired administrative status of the
                      interface.  Supports read-only access.
  ifOperStatus        The operational status of the interface.  This
                      object is set to lowerLayerDown(7) if the
                      ifOperStatus of its otn interface or of its
                      OChGroup interface is down(2).
                      Otherwise, it is set to down(2) if one or more
                      of the objects optIfOChCurrentStatus,
                      optIfOTUkCurrentStatus, optIfODUkTCurrentStatus,
                      and optIfODUkTtpCurrentStatus indicates
                      that any defect is present.
  ifLastChange        The value of sysUpTime at the last change in
                      ifOperStatus.
  ifName              Enterprise-specific convention (e.g., TL-1 AID)
                      to identify the physical or data entity
                      associated with this interface or an
                      OCTET STRING of zero length.  The
                      enterprise-specific convention is
                      intended to provide the means to reference one
                      or more enterprise-specific tables.
  ifLinkUpDownTrapEnable  Default value is disabled(2).  Supports
                          read-only access.
  ifHighSpeed         Current bandwidth of the interface in Mega-bits
                      per second.  A value of n represents a range of
                      'n-0.5' to 'n+0.499999'.
  ifConnectorPresent  Set to false(2).
  ifAlias             The (non-volatile) alias name for this interface
                      as assigned by the network manager.

Lam, et al. Standards Track [Page 11] RFC 3591 Optical Interface Type MIB September 2003

2.5. Use of ifStackTable

 Use of the ifStackTable and ifInvStackTable to associate the
 opticalTransport and opticalChannel interface entries is best
 illustrated by the example shown in Figure 5.  The example assumes an
 otn interface with ifIndex i that carries two multiplexed och
 interfaces with ifIndex values of j and k, respectively.  The example
 shows that j and k are stacked above (i.e., multiplexed into) i.
 Furthermore, it shows that there is no layer lower than i and no
 layer higher than j and/or k.
                   HigherLayer   LowerLayer
                  --------------------------
                       0             j
                       0             k
                       j             i
                       k             i
                       i             0
            Figure 5: Use of ifStackTable for an OTN port
 Figure 6 illustrates an example for a banded configuration.  The
 example assumes an otn interface with ifIndex i that carries two
 multiplexed och groups with ifIndex values u and v.  An och group
 with ifIndex value u combines two och interfaces with ifIndex values
 of a and b.  An och group with ifIndex value v combines two och
 interfaces with ifIndex values of c and d.  The example show that a
 and b are stacked above (i.e., multiplexed into) u.  Likewise, c and
 d are stacked above v.  u and v are multiplexed into i.  Furthermore,
 it shows that there is no layer lower than i and no layer higher than
 a, b, c, and/or d.  It also shows that u has a and b as its higher
 layers, and v has c and d as its higher layers.
                   HigherLayer   LowerLayer
                  --------------------------
                       0             a
                       0             b
                       0             c
                       0             d
                       a             u
                       b             u
                       c             v
                       d             v
                       u             i
                       v             i
                       i             0

Figure 6: Use of ifStackTable for an OTN port for a banded configuration

Lam, et al. Standards Track [Page 12] RFC 3591 Optical Interface Type MIB September 2003

 For the inverse stack table, it provides the same information as the
 interface stack table, with the order of the Higher and Lower layer
 interfaces reversed.

2.6. Optical Network Terminology

 The terminology used in this document to describe the layers of an
 optical network and the error conditions and performance monitoring
 parameters on an optical circuit as monitored by an optical system is
 listed below.  These terms are defined in ITU-T Recommendations G.872
 [ITU-T G.872], G.709 [ITU-T G.709], G.798 [ITU-T G.798], G.874 [ITU-T
 G.874], G.874.1 [ITU-T G.874.1], and G.806 [ITU-T G.806].  Brief
 definitions of some terms are also included here to facilitate the
 readability of this document.
 Degraded Threshold (DEGTHR) - G.806
       A threshold level for declaring a performance monitoring (PM)
       Second (a time period of one second) to be bad.  A PM Second is
       declared bad if the percentage of detected errored blocks in
       that second or the number of errored blocks in that Second is
       greater than or equal to DEGTHR.
 DEGM - G.806
       A threshold level for declaring a Degraded Signal defect
       (dDEG).  A dDEG shall be declared if DEGM consecutive bad PM
       Seconds are detected.
 Expected Destination Access Point Identifier (ExDAPI) - G.798
       The Expected Destination Access Point Identifier (ExDAPI),
       provisioned by the managing system, to be compared with the TTI
       accepted at the overhead position of the sink for the purpose
       of checking the integrity of connectivity.
 Expected Source Access Point Identifier (ExSAPI) - G.798
       The Expected Source Access Point Identifier (ExSAPI),
       provisioned by the managing system, to be compared with the TTI
       accepted at the overhead position of the sink for the purpose
       of checking the integrity of connectivity.
 Inter-Domain Interface (IrDI) - G.872
       A physical interface that represents the boundary between two
       administrative domains.
       G.709 defines the requirements for the IrDI at the Network Node
       Interface (NNI).
 Intra-Domain Interface (IaDI) - G.872
       A physical interface within an administrative domain.

Lam, et al. Standards Track [Page 13] RFC 3591 Optical Interface Type MIB September 2003

 Optical Channel Layer Network (OCh) - G.872
       This layer network provides end-to-end networking of optical
       channels for transparently conveying client information of
       varying format (e.g., SDH STM-N, PDH 565 Mbit/s, cell based
       ATM, etc.).
 Optical Channel Data Unit Path Layer Network (ODUk) - G.709/Y.1331
       This layer network provides functionality for the transport of
       information structure consisting of the information payload
       (OPUk) and the related overhead for management of an optical
       channel.
 Optical Channel Data Unit Tandem Connection Sub-Layer Network (ODUkT)
 - G.709/Y.1331
       This layer network is a sub-layer of the optical data unit
       layer, which provides the capability for tandem connection
       monitoring.  One to six nested levels of monitoring are defined
       for OTN.
 Optical Channel Payload Unit (OPUk) - G.709/Y.1331
       The OPUk is the information structure used to adapt client
       information for transport over an optical channel.  OPUk
       capacities for k=1, k=2, k=3 are defined in ITU-T.  The index
       "k" is used to represent different versions of OPUk, ODUk and
       OTUk.  k=1 represents an approximate bit rate of 2.5 Gbit/s,
       k=2 represents an approximate bit rate of 10 Gbit/s, and k=3
       represents an approximate bit rate of 40 Gbit/s.
 Optical Multiplex Section Layer Network (OMS) - G.872
       This layer network provides functionality for networking of a
       multi-wavelength optical signal.  Note that a "multi-
       wavelength" signal includes the case of just one optical
       channel.
 Optical Transport Module (OTM-n[r].m) - G.872
       The OTM is the information structure that is transported across
       an ONNI.  The index n and m define the number of supported
       wavelengths and bit rates at the interface.
       Two OTM structures are defined: OTM with full functionality
       (OTM-n.m) and OTM with reduced functionality (OTM-0.m & OTM-
       nr.m).
       The OTM-n.m consists of up to n multiplexed optical channels
       and an OTM overhead signal to support the non-associated
       overhead.  The OTM-0 consists of a single optical channel

Lam, et al. Standards Track [Page 14] RFC 3591 Optical Interface Type MIB September 2003

       without a specific color assigned.  The OTM-nr.m consists of up
       to n multiplexed optical channels.  Non associated overhead is
       not supported.
 Optical Transport Network (OTN) - G.872
       A transport network bounded by optical channel access points.
       The optical transport network layered structure is comprised of
       the optical channel, optical multiplex section and optical
       transmission section layer networks.
       According to G.872, an OTN-compliant interface is an interface
       of the optical transport network based on the architecture
       defined in G.872, while an OTN-non-compliant interface is an
       interface that does not comply with the interface
       recommendations that will be defined for the optical transport
       network based on the architecture defined in G.872.
 Optical Transmission Section Layer Network (OTS) - G.872
       This layer network provides functionality for transmission of
       optical signals on optical media of various types.
 Optical Channel Transport Unit Section Layer Network (OTUk) - G.709
       The OTUk is the layer network that provides for the transport
       of an ODUk over one or more optical channel link connections.
       It consists of the optical channel data unit and OTUk related
       overhead (FEC and overhead for management of an optical channel
       link connection).  It is characterized by its frame structure,
       bit rate, and bandwidth.
 Payload Type Mismatch (PLM)
       The detection of a mismatch of payload type is based on a
       comparison between the expected Payload Type signal,
       provisioned via the management interface, and the received
       Payload Type signal.
 Trail Trace Identifier Transmitted (TxTI) - G.798
       The Trail Trace Identifier (TTI) information, provisioned by
       the managing system, to be placed in the TTI overhead position
       of the source of a trail for transmission.
 Trail Trace Identifier Accepted (AcTI) - G.798
       The Trail Trace Identifier (TTI) information accepted from the
       TTI overhead position at the sink of a trail.
 Trail Trace Identifier Accepted Status (AcTIStatus) - G.798
       The Status of the Trail Trace Identifier (TTI) accepted from
       the TTI overhead position at the sink of a trail.

Lam, et al. Standards Track [Page 15] RFC 3591 Optical Interface Type MIB September 2003

 Trace Identifier Mismatch (TIM) - G.798
       The detection of TIM is based on a comparison between the
       expected Trial Trace Identifier (TTI), configured via the
       management interface, and the received TTI.
 Trace Identifier Mismatch Consequent Action Enabled (TimActEnabled) -
 G.798
       The Consequent Action function of TIM is disabled.
 Trace Identifier Mismatch Detection Mode (TimDetMode) - G.798
       The mode of detecting Trace Identifier Mismatch (TIM).
       Possible modes are:
       (1) off - no checking,
       (2) SAPI - checking the SAPI only,
       (3) DAPI - checking  the DAPI only, and
       (4) Both - checking both the SAPI and DAPI.

2.6.1. Defect Conditions

 The following Defect conditions are defined in G.798 (as fault cause)
 for OTN monitoring.
 ais          Alarm Indication Signal (AIS)
 bdi          Backward Defect Indication (BDI)
 bdiO         Backward Defect Indication - Overhead (BDI-O)
 bdiP         Backward Defect Indication - Payload (BDI-P)
 deg          Degraded (DEG)
 lck          Locked (LCK)
 lof          Loss of Frame (LOF)
 lom          Loss of Multi Frame
 los          Loss of Signal (LOS)
 losO         Loss of Signal - Overhead (LOS-O)
 losP         Loss of Signal - Payload (LOS-P)
 oci          Open Connection Indication (OCI)
 plm          Payload Mismatch (PLM)
 ssf          Server Signal Failure (SSF)
 ssfO         Server Signal Failure - Overhead (SSF-O)
 ssfP         Server Signal Failure - Payload (SSF-P)
 tim          Trace Identifier Mismatch (TIM)
 The relationship of these conditions within a network layer and
 between layers are described in G.798 [ITU-T G.798].

Lam, et al. Standards Track [Page 16] RFC 3591 Optical Interface Type MIB September 2003

2.6.2. Performance Parameters

 To facilitate identification of equipment and facilities that may
 require maintenance, it is necessary to monitor parameters such as
 optical power at each layer.  The measurements are taken
 periodically, and a snapshot of the current value is also made
 available.  More specifically, performance parameters at each layer
 are maintained for the current 15-minute interval, the current 24-
 hour interval, N previous 15-minute intervals where 4 <= N <= 96, and
 one previous 24-hour interval.
 Note that some of the previous interval data will be unavailable if
 the agent has restarted within the last 24 hours.
 There is no requirement for an agent to ensure a fixed relationship
 between the start of a 15-minute or 24-hour interval and any wall
 clock;  however, some agents may align the 15-minute intervals with
 quarter hours and may align the 24-hour intervals with a particular
 hour of the day (e.g., 00:00 UTC).
 Note that some DWDM systems may also monitor the laser temperature of
 the equipment in addition to monitoring the optical power.  However,
 industry opinions vary widely with respect to laser temperature
 monitoring, in particular regarding the benefit of the monitoring and
 which temperatures are to be monitored (i.e., all or only some of the
 pump lasers).  Similarly, there are varying opinions regarding mid-
 stage power monitoring.  Since no consensus was reached, it was
 decided that the laser temperature monitoring and mid-stage
 monitoring would not be standardized in the MIB.  If an
 implementation would like to monitor these parameters, one could use
 a proprietary MIB or the ENTITY-SENSOR-MIB [RFC3433] to capture this
 information.

Lam, et al. Standards Track [Page 17] RFC 3591 Optical Interface Type MIB September 2003

 The sink-side monitoring points for the various layers are shown in
 Figure 7 below.
   OCh sink pre-OTN PM params
       |
       |    OChGroup sink pre-OTN params
       |        |
       |        |               OMSn sink pre-OTN PM params
       |        |                    |
       |        |                    |     OTSn sink pre-OTN PM params
       |        |                    |                   |
       V        V                    V                   V
                                                        /|
  ____/|_______/|                   /|                 / |
      \| .    / |__________________/ |________________/  |_____
         .    \ |              ____\ |                \  |
  ____/|_______\|             |     \|              ___\ |
      \|      C-Band          |   Demux            |    \|
                              |                    |
                              |                    |
  ____/|_______/|             |                   OSC
      \| .    / |_____________|
         .    \ |
  ____/|_______\|
      \|     L-Band
 optical     optical              optical       OSC Drop Filter
 rcvr (O/E)  demux                demux
     OCh      OChGroup             OMSn               OTSn
           Figure 7: Sink-side pre-OTN monitoring points

Lam, et al. Standards Track [Page 18] RFC 3591 Optical Interface Type MIB September 2003

 The source-side monitoring points for the various layers are shown in
 Figure 8 below.
 OCh src pre-OTN PM params
      |
      |    OChGroup src pre-OTN PM params
      |       |
      |       |            OMSn src pre-OTN PM params
      |       |                  |
      |       |                  |          OTSn src pre-OTN PM params
      |       |                  |                |
      V       V                  V                V
                                                  |\
  ___|\______|\                  |\               | \
     |/    . | \_________________| \______________|  \______
           . | /              ___| /              |  /
         ----|/              |   |/             __| /
        C-Band MUX           |   Mux           |  |/
                             |                 |
                             |                OSC
  ___|\______|\              |
     |/    . | \_____________|
           . | /
         ----|/
        L-Band MUX
  optical  optical             optical      OSC Add Filter
  xmtr     mux                 mux
  (E/O)
   OCh     OChGroup              OMSn             OTSn
          Figure 8: Source-side pre-OTN monitoring points
 Note that optical performance parameters are of type Integer32,
 rather than Counter32 or Gauge32, because it is possible for these
 objects to increase or decrease and to assume negative or positive
 values.

Lam, et al. Standards Track [Page 19] RFC 3591 Optical Interface Type MIB September 2003

2.7. Tandem Connection Monitoring (TCM)

 An ODUk termination can be provisioned to support (0..6) TCM levels.
 Each TCM field contains the following subfields:
  1. Trail Trace Identifier (TTI)
  2. Bit Interleaved Parity 8 (BIP8)
  3. Backward Defect Indication (BDI)
  4. Backward Error Indication (BEI)
  5. Status bits indicating the presence of TCM overhead, Incoming

AlignmentError, or a maintenance signal (STAT).

 The insertion of these subfields is controlled by:
  1. optIfODUkTSourceMode or otnODUkTsinkMode
 The detection and corresponding action of these subfields are
 controlled by:
  1. optIfODUkTTimDetMode
  2. optIfODUkTTimActEnabled
 The TCM connection is used for monitoring the quality of an end to
 end connection or any segment, as illustrated in the example:
    TCM1 used for the end-to-end connection from A1 to A2.
    TCM2 used for segment B1-B2, then used again for segment B3-B4.
    TCM3-TCM6 these bytes are not in used in this example.

Lam, et al. Standards Track [Page 20] RFC 3591 Optical Interface Type MIB September 2003

 The TCM connection can be nested (B1-B2 is nested in A1-A2) or
 cascaded (B1-B2 and B3-B4).
        ______     ______     ______     ______     ______
        |TCM6|     |TCM6|     |TCM6|     |TCM6|     |TCM6|
        |----|     |----|     |----|     |----|     |----|
        |TCM5|     |TCM5|     |TCM5|     |TCM5|     |TCM5|
        |----|     |----|     |----|     |----|     |----|
        |TCM4|     |TCM4|     |TCM4|     |TCM4|     |TCM4|
        |----|     |----|     |----|     |----|     |----|
        |TCM3|     |TCM3|     |TCM3|     |TCM3|     |TCM3|
        |----|     |----|     |----|     |----|     |----|
        |TCM2|     |TCM2|     |TCM2|     |TCM2|     |TCM2|
        |----|     |----|     |----|     |----|     |----|
        |TCM1|     |TCM1|     |TCM1|     |TCM1|     |TCM1|
        |----|     |----|     |----|     |----|     |----|
           |         |          |          |           |
           |         |          |          |           |
           |         |          |          |           |
           |         |          |          |           |
           |         |          |          |           |
       |\         |\         /|         |\         /|        /|
 ----> | \________| \_______/ |_________| \_____  / |______ / | ---->
       | /        | /       \ |         | /       \ |       \ |
       |/         |/         \|         |/         \|        \|
 TCM1: A1 <------------------------------------------------> A2
 TCM2:            B1 <-----> B2         B3 <-----> B4

3. Structure of the MIB

 The managed Optical Networking interface objects are arranged into
 the following groups of tables:
 The optIfOTMn group handles the OTM information structure of an
 optical interface.
    optIfOTMnTable
 The optIfPerfMon group handles the current 15-minute and 24-hour
 interval elapsed time, as well as the number of 15-minute intervals
 for all layers.
    optIfPerfMonIntervalTable

Lam, et al. Standards Track [Page 21] RFC 3591 Optical Interface Type MIB September 2003

 The optIfOTSn groups handle the configuration and performance
 monitoring information for OTS layers.
    optIfOTSnConfigTable
    optIfOTSnSinkCurrentTable
    optIfOTSnSinkIntervalTable
    optIfOTSnSinkCurDayTable
    optIfOTSnSinkPrevDayTable
    optIfOTSnSrcCurrentTable
    optIfOTSnSrcIntervalTable
    optIfOTSnSrcCurDayTable
    optIfOTSnSrcPrevDayTable
 The optIfOMSn groups handle the configuration and performance
 information for OMS layers.
    optIfOMSnConfigTable
    optIfOMSnSinkCurrentTable
    optIfOMSnSinkIntervalTable
    optIfOMSnSinkCurDayTable
    optIfOMSnSinkPrevDayTable
    optIfOMSnSrcCurrentTable
    optIfOMSnSrcIntervalTable
    optIfOMSnSrcCurDayTable
    optIfOMSnSrcPrevDayTable
 The optIfOChGroup groups handle the configuration and performance
 information for OChGroup layers.
    optIfOChGroupConfigTable
    optIfOChGroupSinkCurrentTable
    optIfOChGroupSinkIntervalTable
    optIfOChGroupSinkCurDayTable
    optIfOChGroupSinkPrevDayTable
    optIfOChGroupSrcCurrentTable
    optIfOChGroupSrcIntervalTable
    optIfOChGroupSrcCurDayTable
    optIfOChGroupSrcPrevDayTable

Lam, et al. Standards Track [Page 22] RFC 3591 Optical Interface Type MIB September 2003

 The optIfOCh groups handle the configuration and performance
 monitoring information for OCh layers.
    optIfOChConfigTable
    optIfOChSinkCurrentTable
    optIfOChSinkIntervalTable
    optIfOChSinkCurDayTable
    optIfOChSinkPrevDayTable
    optIfOChSrcCurrentTable
    optIfOChSrcIntervalTable
    optIfOChSrcCurDayTable
    optIfOChSrcPrevDayTable
 The optIfOTUk groups handle configuration information for OTUk.
    optIfOTUkConfigTable
    optIfGCC0ConfigTable
 The optIfODUk groups handle configuration information for ODUk.
    optIfODUkConfigTable
    optIfODUkTtpConfigTable
    optIfODUkPositionSeqTable
    optIfODUkNimConfigTable
    optIfGCC12ConfigTable
 The optIfODUkT groups handle configuration information for ODUkT.
    optIfODUkTConfigTable
    optIfODUkTNimConfigTable
 This memo does not define MIB objects for optical system cross-
 connects.  After a consensus is reached on definitions of the
 interface MIB objects for optical systems (resulting from resolution
 of discussions on the objects proposed in this memo), work can
 progress on the definitions of tables to represent cross-connects
 (e.g., OCh optical cross-connects and ODUk electrical cross-
 connects).

3.1. The optIfOTMn group

3.1.1. optIfOTMnTable

 This table contains the OTM structure information of an optical
 interface.

Lam, et al. Standards Track [Page 23] RFC 3591 Optical Interface Type MIB September 2003

3.2. The optIfPerfMon group

3.2.1. optIf Performance Monitoring Interval Table

 This table applies to all performance monitoring on an NE.  It
 records on a per-interface basis the elapsed time in the current 15-
 minute and 24-hour interval, as well as the total number of 15-minute
 intervals and the number of invalid 15-minute intervals.

3.3. The optIfOTSn groups

3.3.1. optIfOTSn Configuration group

3.3.1.1. optIfOTSn Configuration Table

 This table contains information on configuration of optIfOTSn
 interfaces, in addition to the information on such interfaces
 contained in the ifTable.

3.3.2. optIfOTSn Pre-OTN PM group

3.3.2.1. optIfOTSn Source Current Table

 This table contains information on current performance of optIfOTSn
 interfaces contained in the ifTable.

3.3.2.2. optIfOTSn Source Interval Table

 This table contains information on historic performance of optIfOTSn
 interfaces contained in the ifTable.

3.3.2.3. optIfOTSn Source Current Day Table

 This table contains a snapshot of information for the current 24-hour
 period for optIfOTSn interfaces contained in the ifTable.

3.3.2.4. optIfOTSn Source Previous Day Table

 This table contains a snapshot of information for the previous 24-
 hour period for optIfOTSn interfaces contained in the ifTable.

3.3.2.5. optIfOTSn Sink Current Table

 This table contains information on current performance of optIfOTSn
 interfaces contained in the ifTable.

Lam, et al. Standards Track [Page 24] RFC 3591 Optical Interface Type MIB September 2003

3.3.2.6. optIfOTSn Sink Interval Table

 This table contains information on historic performance of optIfOTSn
 interfaces contained in the ifTable.

3.3.2.7. optIfOTSn Sink Current Day Table

 This table contains a snapshot of information for the current 24-hour
 period for optIfOTSn interfaces contained in the ifTable.

3.3.2.8. optIfOTSn Sink Previous Day Table

 This table contains a snapshot of information for the previous 24-
 hour period for optIfOTSn interfaces contained in the ifTable.

3.4. The optIfOMSn groups

3.4.1. optIfOMSn Configuration group

3.4.1.1. optIfOMSn Configuration Table

 This table contains information on configuration of optIfOMSn
 interfaces, in addition to the information on such interfaces
 contained in the ifTable.

3.4.2. optIfOMSn Pre-OTN PM group

3.4.2.1. optIfOMSn Source Current Table

 This table contains information on current performance of optIfOMSn
 interfaces contained in the ifTable.

3.4.2.2. optIfOMSn Source Interval Table

 This table contains information on historic performance of optIfOMSn
 interfaces contained in the ifTable.

3.4.2.3. optIfOMSn Source Current Day Table

 This table contains a snapshot of information for the current 24-hour
 period for optIfOMSn interfaces contained in the ifTable.

3.4.2.4. optIfOMSn Source Previous Day Table

 This table contains a snapshot of information for the previous 24-
 hour period for optIfOMSn interfaces contained in the ifTable.

Lam, et al. Standards Track [Page 25] RFC 3591 Optical Interface Type MIB September 2003

3.4.2.5. optIfOMSn Sink Current Table

 This table contains information on current performance of optIfOMSn
 interfaces contained in the ifTable.

3.4.2.6. optIfOMSn Sink Interval Table

 This table contains information on historic performance of optIfOMSn
 interfaces contained in the ifTable.

3.4.2.7. optIfOMSn Sink Current Day Table

 This table contains a snapshot of information for the current 24-hour
 period for optIfOMSn interfaces contained in the ifTable.

3.4.2.8. optIfOMSn Sink Previous Day Table

 This table contains a snapshot of information for the previous 24-
 hour period for optIfOMSn interfaces contained in the ifTable.

3.5. The optIfOChGroup groups

3.5.1. optIfOChGroup Configuration group

3.5.1.1. optIfOChGroup Configuration Table

 This table contains information on configuration of optIfOChGroup
 interfaces, in addition to the information on such interfaces
 contained in the ifTable.

3.5.2. optIfOChGroup Pre-OTN PM group

3.5.2.1. optIfOChGroup Source Current Table

 This table contains information on current performance of
 optIfOChGroup interfaces contained in the ifTable.

3.5.2.2. optIfOChGroup Source Interval Table

 This table contains information on historic performance of
 optIfOChGroup interfaces contained in the ifTable.

3.5.2.3. optIfOChGroup Source Current Day Table

 This table contains a snapshot of information for the current 24-hour
 period for optIfOChGroup interfaces contained in the ifTable.

Lam, et al. Standards Track [Page 26] RFC 3591 Optical Interface Type MIB September 2003

3.5.2.4. optIfOChGroup Source Previous Day Table

 This table contains a snapshot of information for the previous 24-
 hour period for optIfOChGroup interfaces contained in the ifTable.

3.5.2.5. optIfOChGroup Sink Current Table

 This table contains information on current performance of
 optIfOChGroup interfaces contained in the ifTable.

3.5.2.6. optIfOChGroup Sink Interval Table

 This table contains information on historic performance of
 optIfOChGroup interfaces contained in the ifTable.

3.5.2.7. optIfOChGroup Sink Current Day Table

 This table contains a snapshot of information for the current 24-hour
 period for optIfOChGroup interfaces contained in the ifTable.

3.5.2.8. optIfOChGroup Sink Previous Day Table

 This table contains a snapshot of information for the previous 24-
 hour period for optIfOChGroup interfaces contained in the ifTable.

3.6. The optIfOCh groups

3.6.1. optIfOCh Configuration group

3.6.1.1. optIfOCh Configuration Table

 This table contains information on configuration of optIfOCh
 interfaces, in addition to the information on such interfaces
 contained in the ifTable.

3.6.2. optIfOCh Pre-OTN PM group

3.6.2.1. optIfOCh Source Current Table

 This table contains information on current performance of optIfOCh
 interfaces contained in the ifTable.

3.6.2.2. optIfOCh Source Interval Table

 This table contains information on historic performance of optIfOCh
 interfaces contained in the ifTable.

Lam, et al. Standards Track [Page 27] RFC 3591 Optical Interface Type MIB September 2003

3.6.2.3. optIfOCh Source Current Day Table

 This table contains a snapshot of information for the current 24-hour
 period for optIfOCh interfaces contained in the ifTable.

3.6.2.4. optIfOCh Source Previous Day Table

 This table contains a snapshot of information for the previous 24-
 hour period for optIfOCh interfaces contained in the ifTable.

3.6.2.5. optIfOCh Sink Current Table

 This table contains information on current performance of optIfOCh
 interfaces contained in the ifTable.

3.6.2.6. optIfOCh Sink Interval Table

 This table contains information on historic performance of optIfOCh
 interfaces contained in the ifTable.

3.6.2.7. optIfOCh Sink Current Day Table

 This table contains a snapshot of information for the current 24-hour
 period for optIfOCh interfaces contained in the ifTable.

3.6.2.8. optIfOCh Sink Previous Day Table

 This table contains a snapshot of information for the previous 24-
 hour period for optIfOCh interfaces contained in the ifTable.

3.7. The optIfOTUk groups

3.7.1. optIfOTUk Configuration group

3.7.1.1. optIfOTUk Configuration Table

 This table contains information on configuration of optIfOTUk
 interfaces, in addition to the information on such interfaces
 contained in the ifTable.

3.7.2. optIfGCC0 Configuration group

3.7.2.1. optIfGCC0 Configuration Table

 This table contains information on configuration of the GCC0
 communication channel.

Lam, et al. Standards Track [Page 28] RFC 3591 Optical Interface Type MIB September 2003

3.8. The optIfODUk groups

3.8.1. optIfODUk Configuration group

3.8.1.1. optIfODUk Configuration Table

 This table contains all the objects that are common to endpoints
 (called trail termination points or TTPs) and connection termination
 points (CTPs), and also includes a flag stating whether TTP functions
 are present.

3.8.2. optIfODUkTtp Configuration group

3.8.2.1. optIfODUkTtp Configuration Table

 This table contains TTP-specific information on configuration of
 optIfODUk interfaces, in addition to the information on such
 interfaces contained in the ifTable.

3.8.3. optIfODUk Position Seq group

3.8.3.1. optIfODUk Position Seq Table

 This table contains information on the position sequence of the TCM
 function and/or GCC12 access that have been created within the
 optIfODUk interfaces, in addition to the information on such
 interfaces contained in the ifTable.

3.8.4. optIfODUk Nim Configuration group

3.8.4.1. optIfODUk Nim Configuration Table

 This table contains information on configuration of optIfODUk Non-
 intrusive monitoring.

3.8.5. optIfGCC12 Configuration group

3.8.5.1. optIfGCC12 Configuration Table

 This table contains information on configuration of the GCC1 and GCC2
 communication channels.

Lam, et al. Standards Track [Page 29] RFC 3591 Optical Interface Type MIB September 2003

3.9. The optIfODUkT groups

3.9.1. optIfODUkT Configuration group

3.9.1.1. optIfODUkT Configuration Table

 This table contains information on configuration of optIfODUkT
 interfaces, in addition to the information on such interfaces
 contained in the ifTable.

3.9.2. optIfODUkT Nim Configuration group

3.9.2.1. optIfODUkT Nim Configuration Table

 This table contains information on configuration of optIfODUkT Non-
 intrusive monitoring.

4. Object Definitions

OPT-IF-MIB DEFINITIONS ::= BEGIN

IMPORTS

  MODULE-IDENTITY, OBJECT-TYPE, Gauge32, Integer32,
    Unsigned32, transmission
        FROM SNMPv2-SMI
  TEXTUAL-CONVENTION, RowPointer, RowStatus, TruthValue
        FROM SNMPv2-TC
  SnmpAdminString
        FROM SNMP-FRAMEWORK-MIB
  MODULE-COMPLIANCE, OBJECT-GROUP
        FROM SNMPv2-CONF
  ifIndex
        FROM IF-MIB;

– This is the MIB module for the OTN Interface objects.

optIfMibModule MODULE-IDENTITY

  LAST-UPDATED "200308130000Z"
  ORGANIZATION "IETF AToM MIB Working Group"
  CONTACT-INFO
     "WG charter:
        http://www.ietf.org/html.charters/atommib-charter.html
      Mailing Lists:
         General Discussion: atommib@research.telcordia.com
         To Subscribe: atommib-request@research.telcordia.com

Lam, et al. Standards Track [Page 30] RFC 3591 Optical Interface Type MIB September 2003

      Editor: Hing-Kam Lam
      Postal: Lucent Technologies, Room 4C-616
              101 Crawfords Corner Road
              Holmdel, NJ 07733
         Tel: +1 732 949 8338
       Email: hklam@lucent.com"
  DESCRIPTION
     "The MIB module to describe pre-OTN and OTN interfaces.
      Copyright (C) The Internet Society (2003).  This version
      of this MIB module is part of RFC 3591;  see the RFC
      itself for full legal notices."
  REVISION  "200308130000Z"
  DESCRIPTION
     "Initial version, published as RFC 3591."
  ::={ transmission 133 }

– textual conventions

OptIfAcTI ::= TEXTUAL-CONVENTION

STATUS  current
DESCRIPTION
  "The trace identifier (TI) accepted at the receiver."
SYNTAX  OCTET STRING (SIZE(64))

OptIfBitRateK ::= TEXTUAL-CONVENTION

STATUS  current
DESCRIPTION
  "Indicates the index 'k' that is used to
   represent a supported bit rate and the different
   versions of OPUk, ODUk and OTUk.
   Allowed values of k are defined in ITU-T G.709.
   Currently allowed values in G.709 are:
      k=1 represents an approximate bit rate of 2.5 Gbit/s,
      k=2 represents an approximate bit rate of 10 Gbit/s,
      k=3 represents an approximate bit rate of 40 Gbit/s."
SYNTAX  Integer32

OptIfDEGM ::= TEXTUAL-CONVENTION

STATUS  current
DESCRIPTION
  "Indicates the threshold level for declaring a Degraded Signal
   defect (dDEG).  A dDEG shall be declared if OptIfDEGM
   consecutive bad PM Seconds are detected."
SYNTAX  Unsigned32 (2..10)

Lam, et al. Standards Track [Page 31] RFC 3591 Optical Interface Type MIB September 2003

OptIfDEGThr ::= TEXTUAL-CONVENTION

STATUS  current
DESCRIPTION
  "Indicates the threshold level for declaring a performance
   monitoring (PM) Second to be bad.  A PM Second is declared bad if
   the percentage of detected errored blocks in that second is
   greater than or equal to OptIfDEGThr."
SYNTAX  Unsigned32 (1..100)

OptIfDirectionality ::= TEXTUAL-CONVENTION

STATUS  current
DESCRIPTION
  "Indicates the directionality of an entity."
SYNTAX  INTEGER {
  sink(1),
  source(2),
  bidirectional(3)
  }

OptIfSinkOrSource ::= TEXTUAL-CONVENTION

STATUS  current
DESCRIPTION
  "Indicates the directionality of an entity
   that is allowed only to be a source or sink."
SYNTAX  INTEGER {
  sink(1),
  source(2)
  }

OptIfExDAPI ::= TEXTUAL-CONVENTION

STATUS  current
DESCRIPTION
  "The Destination Access Point Identifier (DAPI)
   expected by the receiver."
SYNTAX  OCTET STRING (SIZE(16))

OptIfExSAPI ::= TEXTUAL-CONVENTION

STATUS  current
DESCRIPTION
  "The Source Access Point Identifier (SAPI)
   expected by the receiver."
SYNTAX  OCTET STRING (SIZE(16))

OptIfIntervalNumber ::= TEXTUAL-CONVENTION

STATUS  current
DESCRIPTION
  "Uniquely identifies a 15-minute interval.  The interval
   identified by 1 is the most recently completed interval, and

Lam, et al. Standards Track [Page 32] RFC 3591 Optical Interface Type MIB September 2003

   the interval identified by n is the interval immediately
   preceding the one identified by n-1."
SYNTAX  Unsigned32 (1..96)

OptIfTIMDetMode ::= TEXTUAL-CONVENTION

STATUS  current
DESCRIPTION
  "Indicates the mode of the Trace Identifier Mismatch (TIM)
   Detection function."
SYNTAX  INTEGER {
  off(1),
  dapi(2),
  sapi(3),
  both(4)
  }

OptIfTxTI ::= TEXTUAL-CONVENTION

STATUS  current
DESCRIPTION
  "The trace identifier (TI) transmitted."
SYNTAX  OCTET STRING (SIZE(64))

– object groups

optIfObjects OBJECT IDENTIFIER ::= { optIfMibModule 1 } optIfConfs OBJECT IDENTIFIER ::= { optIfMibModule 2 }

optIfOTMn OBJECT IDENTIFIER ::= { optIfObjects 1 } optIfPerfMon OBJECT IDENTIFIER ::= { optIfObjects 2 } optIfOTSn OBJECT IDENTIFIER ::= { optIfObjects 3 } optIfOMSn OBJECT IDENTIFIER ::= { optIfObjects 4 } optIfOChGroup OBJECT IDENTIFIER ::= { optIfObjects 5 } optIfOCh OBJECT IDENTIFIER ::= { optIfObjects 6 }

optIfOTUk OBJECT IDENTIFIER ::= { optIfObjects 7 } optIfODUk OBJECT IDENTIFIER ::= { optIfObjects 8 } optIfODUkT OBJECT IDENTIFIER ::= { optIfObjects 9 }

optIfGroups OBJECT IDENTIFIER ::= { optIfConfs 1 } optIfCompl OBJECT IDENTIFIER ::= { optIfConfs 2 }

– the optIfOTMn group – This group defines the OTM structure information of an – optical interface.

– OTMn Table

optIfOTMnTable OBJECT-TYPE

Lam, et al. Standards Track [Page 33] RFC 3591 Optical Interface Type MIB September 2003

SYNTAX  SEQUENCE OF OptIfOTMnEntry
MAX-ACCESS  not-accessible
STATUS  current
DESCRIPTION
  "A table of OTMn structure information."
::= { optIfOTMn 1 }

optIfOTMnEntry OBJECT-TYPE

SYNTAX  OptIfOTMnEntry
MAX-ACCESS  not-accessible
STATUS  current
DESCRIPTION
  "A conceptual row that contains the OTMn structure
   information of an optical interface."
INDEX  { ifIndex }
::= { optIfOTMnTable 1 }

OptIfOTMnEntry ::=

SEQUENCE {
  optIfOTMnOrder         Unsigned32,
  optIfOTMnReduced       TruthValue,
  optIfOTMnBitRates      BITS,
  optIfOTMnInterfaceType SnmpAdminString,
  optIfOTMnTcmMax        Unsigned32,
  optIfOTMnOpticalReach  INTEGER
  }

optIfOTMnOrder OBJECT-TYPE

SYNTAX  Unsigned32 (1..900)
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "This object indicates the order of the OTM, which
   represents the maximum number of wavelengths that can be
   supported at the bit rate(s) supported on the interface."
::= { optIfOTMnEntry 1 }

optIfOTMnReduced OBJECT-TYPE

SYNTAX  TruthValue
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "This object indicates whether a reduced or full
   functionality is supported at the interface.  A value of
   true means reduced.  A value of false means full."
::= { optIfOTMnEntry 2 }

optIfOTMnBitRates OBJECT-TYPE

Lam, et al. Standards Track [Page 34] RFC 3591 Optical Interface Type MIB September 2003

SYNTAX  BITS { bitRateK1(0), bitRateK2(1), bitRateK3(2) }
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "This attribute is a bit map representing the bit
   rate or set of bit rates supported on the interface.
   The meaning of each bit position is as follows:
     bitRateK1(0) is set if the 2.5 Gbit/s rate is supported
     bitRateK2(1) is set if the 10 Gbit/s rate is supported
     bitRateK3(2) is set if the 40 Gbit/s rate is supported
   Note that each bit position corresponds to one possible
   value of the type OptIfBitRateK.
   The default value of this attribute is system specific."
::= { optIfOTMnEntry 3 }

optIfOTMnInterfaceType OBJECT-TYPE

SYNTAX  SnmpAdminString
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "This object identifies the type of interface.  The value of
   this attribute will affect the behavior of the OTM with
   respect to presence/absence of OTM Overhead Signal (OOS)
   processing and TCM activation.  For an IrDI interface,
   there is no OOS processing and TCM activation is limited
   to n levels as specified by a TCM level threshold.
   This object contains two fields that are separated by
   whitespace.  The possible values are:
        field 1: one of the 4-character ASCII strings
                  'IrDI' or 'IaDI'
        field 2: free-form text consisting of printable
                 UTF-8 encoded characters
   Note that field 2 is optional.  If it is not present then there
   is no requirement for trailing whitespace after field 1.
   The default values are as follows:
        field 1:  'IaDI'
        field 2: an empty string."
::= { optIfOTMnEntry 4 }

optIfOTMnTcmMax OBJECT-TYPE

SYNTAX  Unsigned32 (0..6)
MAX-ACCESS  read-write
STATUS  current
DESCRIPTION

Lam, et al. Standards Track [Page 35] RFC 3591 Optical Interface Type MIB September 2003

  "This object identifies the maximum number of TCM
   levels allowed for any Optical Channel contained
   in this OTM.  A new TCM activation will be rejected
   if the requested level is greater than the threshold.
   If InterfaceType object specifies a type of 'IaDI'
   for this OTM, then this attribute is irrelevant.
   Possible values:  unsigned integers in the range
                     from 0 to 6 inclusive.
   Default value:    3."
::= { optIfOTMnEntry 5 }

optIfOTMnOpticalReach OBJECT-TYPE

SYNTAX  INTEGER { intraOffice(1), shortHaul(2), longHaul(3),
                  veryLongHaul(4), ultraLongHaul(5) }
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "This object indicates the length the optical signal
   may travel before requiring termination or regeneration.
   The meaning of the enumeration are:
     intraOffice(1)  - intra-office (as defined in ITU-T G.957)
     shortHaul(2)    - short haul (as defined in ITU-T G.957)
     longHaul(3)     - long haul (as defined in ITU-T G.957)
     veryLongHaul(4) - very long haul (as defined in ITU-T G.691)
     ultraLongHaul(5)- ultra long haul (as defined in ITU-T G.691)"
::= { optIfOTMnEntry 6 }

– the optIfPerfMon group – This group defines performance monitoring objects for all – layers.

– PM interval table

optIfPerfMonIntervalTable OBJECT-TYPE

SYNTAX  SEQUENCE OF OptIfPerfMonIntervalEntry
MAX-ACCESS  not-accessible
STATUS  current
DESCRIPTION
  "A table of 15-minute performance monitoring interval
   information."
::= { optIfPerfMon 1 }

optIfPerfMonIntervalEntry OBJECT-TYPE

SYNTAX  OptIfPerfMonIntervalEntry
MAX-ACCESS  not-accessible
STATUS  current

Lam, et al. Standards Track [Page 36] RFC 3591 Optical Interface Type MIB September 2003

DESCRIPTION
  "A conceptual row that contains 15-minute performance
   monitoring interval information of an interface."
INDEX  { ifIndex }
::= { optIfPerfMonIntervalTable 1 }

OptIfPerfMonIntervalEntry ::=

SEQUENCE {
  optIfPerfMonCurrentTimeElapsed   Gauge32,
  optIfPerfMonCurDayTimeElapsed    Gauge32,
  optIfPerfMonIntervalNumIntervals         Unsigned32,
  optIfPerfMonIntervalNumInvalidIntervals  Unsigned32
  }

optIfPerfMonCurrentTimeElapsed OBJECT-TYPE

SYNTAX  Gauge32 (0..900)
UNITS  "seconds"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "Number of seconds elapsed in the current 15-minute
   performance monitoring interval.
   If, for some reason, such as an adjustment in the NE's
   time-of-day clock, the number of seconds elapsed exceeds
   the maximum value, then the maximum value will be returned."
::= { optIfPerfMonIntervalEntry 1 }

optIfPerfMonCurDayTimeElapsed OBJECT-TYPE

SYNTAX  Gauge32 (0..86400)
UNITS  "seconds"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "Number of seconds elapsed in the current 24-hour interval
   performance monitoring period.
   If, for some reason, such as an adjustment in the NE's
   time-of-day clock, the number of seconds elapsed exceeds
   the maximum value, then the maximum value will be returned."
::= { optIfPerfMonIntervalEntry 2 }

optIfPerfMonIntervalNumIntervals OBJECT-TYPE

SYNTAX  Unsigned32 (0..96)
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The number of 15-minute intervals for which performance
   monitoring data is available.  The number is the same for all
   the associated sub layers of the interface.

Lam, et al. Standards Track [Page 37] RFC 3591 Optical Interface Type MIB September 2003

   An optical interface must be capable of supporting at least
   n intervals, where n is defined as follows:
       The minimum value of n is 4.
       The default of n is 32.
       The maximum value of n is 96.
   The value of this object will be n unless performance
   monitoring was (re-)started for the interface within the last
   (n*15) minutes, in which case the value will be the number of
   complete 15-minute intervals since measurement was
   (re-)started."
::= { optIfPerfMonIntervalEntry 3 }

optIfPerfMonIntervalNumInvalidIntervals OBJECT-TYPE

SYNTAX  Unsigned32 (0..96)
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The number of intervals in the range from 0 to
   optIfPerfMonIntervalNumIntervals for which no performance
   monitoring data is available and/or the data is invalid."
::= { optIfPerfMonIntervalEntry 4 }

– the optIfOTSn group – This group handles the configuration and performance – monitoring objects for OTS layers.

– OTSn config table

optIfOTSnConfigTable OBJECT-TYPE

SYNTAX  SEQUENCE OF OptIfOTSnConfigEntry
MAX-ACCESS  not-accessible
STATUS  current
DESCRIPTION
  "A table of OTSn configuration information."
::= { optIfOTSn 1 }

optIfOTSnConfigEntry OBJECT-TYPE

SYNTAX  OptIfOTSnConfigEntry
MAX-ACCESS  not-accessible
STATUS  current
DESCRIPTION
  "A conceptual row that contains OTSn configuration
   information of an interface."
INDEX  { ifIndex }
::= { optIfOTSnConfigTable 1 }

OptIfOTSnConfigEntry ::=

Lam, et al. Standards Track [Page 38] RFC 3591 Optical Interface Type MIB September 2003

SEQUENCE {
  optIfOTSnDirectionality              OptIfDirectionality,
  optIfOTSnAprStatus                   SnmpAdminString,
  optIfOTSnAprControl                  SnmpAdminString,
  optIfOTSnTraceIdentifierTransmitted  OptIfTxTI,
  optIfOTSnDAPIExpected                OptIfExDAPI,
  optIfOTSnSAPIExpected                OptIfExSAPI,
  optIfOTSnTraceIdentifierAccepted     OptIfAcTI,
  optIfOTSnTIMDetMode                  OptIfTIMDetMode,
  optIfOTSnTIMActEnabled               TruthValue,
  optIfOTSnCurrentStatus               BITS
  }

optIfOTSnDirectionality OBJECT-TYPE

SYNTAX  OptIfDirectionality
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "Indicates the directionality of the entity."
::= { optIfOTSnConfigEntry 1 }

optIfOTSnAprStatus OBJECT-TYPE

SYNTAX  SnmpAdminString
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "This attribute indicates the status of the Automatic
   Power Reduction (APR) function of the entity.  Valid
   values are 'on' and 'off'."
::= { optIfOTSnConfigEntry 2 }

optIfOTSnAprControl OBJECT-TYPE

SYNTAX  SnmpAdminString
MAX-ACCESS  read-write
STATUS  current
DESCRIPTION
  "This object is a UTF-8 encoded string that specifies Automatic
   Power Reduction (APR) control actions requested of this entity
   (when written) and that returns the current APR control state
   of this entity (when read).  The values are implementation-defined.
   Any implementation that instantiates this object must document the
   set of values that it allows to be written, the set of values
   that it will return, and what each of those values means."
::= { optIfOTSnConfigEntry 3 }

optIfOTSnTraceIdentifierTransmitted OBJECT-TYPE

SYNTAX  OptIfTxTI
MAX-ACCESS  read-write

Lam, et al. Standards Track [Page 39] RFC 3591 Optical Interface Type MIB September 2003

STATUS  current
DESCRIPTION
  "The trace identifier transmitted.
   This object is applicable when optIfOTSnDirectionality has the
   value source(2) or bidirectional(3).
   This object does not apply to reduced-capability systems (i.e.,
   those for which optIfOTMnReduced has the value true(1)) or
   at IrDI interfaces (i.e., when optIfOTMnInterfaceType field 1
   has the value 'IrDI').
   If no value is ever set by a management entity for the object
   optIfOTSnTraceIdentifierTransmitted, system-specific default
   value will be used.  Any implementation that instantiates this
   object must document the system-specific default value or how it
   is derived."
::= { optIfOTSnConfigEntry 4 }

optIfOTSnDAPIExpected OBJECT-TYPE

SYNTAX  OptIfExDAPI
MAX-ACCESS  read-write
STATUS  current
DESCRIPTION
  "The DAPI expected by the receiver.
   This object is applicable when optIfOTSnDirectionality has the
   value sink(1) or bidirectional(3).  It has no effect if
   optIfOTSnTIMDetMode has the value off(1) or sapi(3).
   This object does not apply to reduced-capability systems (i.e.,
   those for which optIfOTMnReduced has the value true(1)) or
   at IrDI interfaces (i.e., when optIfOTMnInterfaceType field 1
   has the value 'IrDI')."
::= { optIfOTSnConfigEntry 5 }

optIfOTSnSAPIExpected OBJECT-TYPE

SYNTAX  OptIfExSAPI
MAX-ACCESS  read-write
STATUS  current
DESCRIPTION
  "The SAPI expected by the receiver.
   This object is applicable when optIfOTSnDirectionality has the
   value sink(1) or bidirectional(3).  It has no effect if
   optIfOTSnTIMDetMode has the value off(1) or dapi(2).
   This object does not apply to reduced-capability systems (i.e.,
   those for which optIfOTMnReduced has the value true(1)) or
   at IrDI interfaces (i.e., when optIfOTMnInterfaceType field 1
   has the value 'IrDI')."
::= { optIfOTSnConfigEntry 6 }

optIfOTSnTraceIdentifierAccepted OBJECT-TYPE

SYNTAX  OptIfAcTI

Lam, et al. Standards Track [Page 40] RFC 3591 Optical Interface Type MIB September 2003

MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The actual trace identifier received.
   This object is applicable when optIfOTSnDirectionality has the
   value sink(1) or bidirectional(3).  Its value is unspecified
   if optIfOTSnCurrentStatus has either or both of the
   losO(5) and los(6) bits set.
   This object does not apply to reduced-capability systems (i.e.,
   those for which optIfOTMnReduced has the value true(1)) or
   at IrDI interfaces (i.e., when optIfOTMnInterfaceType field 1
   has the value 'IrDI')."
::= { optIfOTSnConfigEntry 7 }

optIfOTSnTIMDetMode OBJECT-TYPE

SYNTAX  OptIfTIMDetMode
MAX-ACCESS  read-write
STATUS  current
DESCRIPTION
  "Indicates the mode of the Trace Identifier Mismatch (TIM)
   Detection function.  This object is applicable
   when optIfOTSnDirectionality has the value sink(1)
   or bidirectional(3).  The default value is off(1).
   This object does not apply to reduced-capability systems (i.e.,
   those for which optIfOTMnReduced has the value true(1)) or
   at IrDI interfaces (i.e., when optIfOTMnInterfaceType field 1
   has the value 'IrDI').
   The default value of this object is off(1)."
::= { optIfOTSnConfigEntry 8 }

optIfOTSnTIMActEnabled OBJECT-TYPE

SYNTAX  TruthValue
MAX-ACCESS  read-write
STATUS  current
DESCRIPTION
  "Indicates whether the Trace Identifier Mismatch (TIM)
   Consequent Action function is enabled.  This object
   is applicable when optIfOTSnDirectionality has the
   value sink(1) or bidirectional(3).  It has no effect
   when the value of optIfOTSnTIMDetMode is off(1).
   This object does not apply to reduced-capability systems (i.e.,
   those for which optIfOTMnReduced has the value true(1)) or
   at IrDI interfaces (i.e., when optIfOTMnInterfaceType field 1
   has the value 'IrDI').
   The default value of this object is false(2)."
::= { optIfOTSnConfigEntry 9 }

optIfOTSnCurrentStatus OBJECT-TYPE

Lam, et al. Standards Track [Page 41] RFC 3591 Optical Interface Type MIB September 2003

SYNTAX  BITS {
  bdiP(0),
  bdiO(1),
  bdi(2),
  tim(3),
  losP(4),
  losO(5),
  los(6)
  }
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "Indicates the defect condition of the entity, if any.
   This object is applicable when optIfOTSnDirectionality
   has the value sink(1) or bidirectional(3).  In
   reduced-capability systems or at IrDI interfaces
   the only bit position that may be set is los(6)."
::= { optIfOTSnConfigEntry 10 }

– OTSn sink current table – Contains data for the current 15-minute performance monitoring – interval.

optIfOTSnSinkCurrentTable OBJECT-TYPE

SYNTAX  SEQUENCE OF OptIfOTSnSinkCurrentEntry
MAX-ACCESS  not-accessible
STATUS  current
DESCRIPTION
  "A table of OTSn sink performance monitoring information for
   the current 15-minute interval."
::= { optIfOTSn 2 }

optIfOTSnSinkCurrentEntry OBJECT-TYPE

SYNTAX  OptIfOTSnSinkCurrentEntry
MAX-ACCESS  not-accessible
STATUS  current
DESCRIPTION
  "A conceptual row that contains OTSn sink performance
   monitoring information of an interface for the current
   15-minute interval."
INDEX  { ifIndex }
::= { optIfOTSnSinkCurrentTable 1 }

OptIfOTSnSinkCurrentEntry ::=

SEQUENCE {
  optIfOTSnSinkCurrentSuspectedFlag             TruthValue,
  optIfOTSnSinkCurrentInputPower                Integer32,
  optIfOTSnSinkCurrentLowInputPower             Integer32,

Lam, et al. Standards Track [Page 42] RFC 3591 Optical Interface Type MIB September 2003

  optIfOTSnSinkCurrentHighInputPower            Integer32,
  optIfOTSnSinkCurrentLowerInputPowerThreshold  Integer32,
  optIfOTSnSinkCurrentUpperInputPowerThreshold  Integer32,
  optIfOTSnSinkCurrentOutputPower               Integer32,
  optIfOTSnSinkCurrentLowOutputPower            Integer32,
  optIfOTSnSinkCurrentHighOutputPower           Integer32,
  optIfOTSnSinkCurrentLowerOutputPowerThreshold Integer32,
  optIfOTSnSinkCurrentUpperOutputPowerThreshold Integer32
  }

optIfOTSnSinkCurrentSuspectedFlag OBJECT-TYPE

SYNTAX  TruthValue
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "If true, the data in this entry may be unreliable."
::= { optIfOTSnSinkCurrentEntry 1 }

optIfOTSnSinkCurrentInputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The optical power monitored at the input."
::= { optIfOTSnSinkCurrentEntry 2 }

optIfOTSnSinkCurrentLowInputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The lowest optical power monitored at the input during the
   current 15-minute interval."
::= { optIfOTSnSinkCurrentEntry 3 }

optIfOTSnSinkCurrentHighInputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The highest optical power monitored at the input during the
   current 15-minute interval."
::= { optIfOTSnSinkCurrentEntry 4 }

optIfOTSnSinkCurrentLowerInputPowerThreshold OBJECT-TYPE

Lam, et al. Standards Track [Page 43] RFC 3591 Optical Interface Type MIB September 2003

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-write
STATUS  current
DESCRIPTION
  "The lower limit threshold on input power.  If
   optIfOTSnSinkCurrentInputPower drops to this value or below,
   a Threshold Crossing Alert (TCA) should be sent."
::= { optIfOTSnSinkCurrentEntry 5 }

optIfOTSnSinkCurrentUpperInputPowerThreshold OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-write
STATUS  current
DESCRIPTION
  "The upper limit threshold on input power.  If
   optIfOTSnSinkCurrentInputPower reaches or exceeds this value,
   a Threshold Crossing Alert (TCA) should be sent."
::= { optIfOTSnSinkCurrentEntry 6 }

optIfOTSnSinkCurrentOutputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The optical power monitored at the output."
::= { optIfOTSnSinkCurrentEntry 7 }

optIfOTSnSinkCurrentLowOutputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The lowest optical power monitored at the output during the
   current 15-minute interval."
::= { optIfOTSnSinkCurrentEntry 8 }

optIfOTSnSinkCurrentHighOutputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The highest optical power monitored at the output during the
   current 15-minute interval."

Lam, et al. Standards Track [Page 44] RFC 3591 Optical Interface Type MIB September 2003

::= { optIfOTSnSinkCurrentEntry 9 }

optIfOTSnSinkCurrentLowerOutputPowerThreshold OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-write
STATUS  current
DESCRIPTION
  "The lower limit threshold on output power.  If
   optIfOTSnSinkCurrentOutputPower drops to this value or below,
   a Threshold Crossing Alert (TCA) should be sent."
::= { optIfOTSnSinkCurrentEntry 10 }

optIfOTSnSinkCurrentUpperOutputPowerThreshold OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-write
STATUS  current
DESCRIPTION
  "The upper limit threshold on output power.  If
   optIfOTSnSinkCurrentOutputPower reaches or exceeds this value,
   a Threshold Crossing Alert (TCA) should be sent."
::= { optIfOTSnSinkCurrentEntry 11 }

– OTSn sink interval table – Contains data for previous 15-minute performance monitoring – intervals.

optIfOTSnSinkIntervalTable OBJECT-TYPE

SYNTAX  SEQUENCE OF OptIfOTSnSinkIntervalEntry
MAX-ACCESS  not-accessible
STATUS  current
DESCRIPTION
  "A table of historical OTSn sink performance monitoring
   information."
::= { optIfOTSn 3 }

optIfOTSnSinkIntervalEntry OBJECT-TYPE

SYNTAX  OptIfOTSnSinkIntervalEntry
MAX-ACCESS  not-accessible
STATUS  current
DESCRIPTION
  "A conceptual row that contains OTSn sink performance
   monitoring information of an interface during a particular
   historical interval."
INDEX  { ifIndex, optIfOTSnSinkIntervalNumber }
::= { optIfOTSnSinkIntervalTable 1 }

Lam, et al. Standards Track [Page 45] RFC 3591 Optical Interface Type MIB September 2003

OptIfOTSnSinkIntervalEntry ::=

SEQUENCE {
  optIfOTSnSinkIntervalNumber           OptIfIntervalNumber,
  optIfOTSnSinkIntervalSuspectedFlag    TruthValue,
  optIfOTSnSinkIntervalLastInputPower   Integer32,
  optIfOTSnSinkIntervalLowInputPower    Integer32,
  optIfOTSnSinkIntervalHighInputPower   Integer32,
  optIfOTSnSinkIntervalLastOutputPower  Integer32,
  optIfOTSnSinkIntervalLowOutputPower   Integer32,
  optIfOTSnSinkIntervalHighOutputPower  Integer32
  }

optIfOTSnSinkIntervalNumber OBJECT-TYPE

SYNTAX  OptIfIntervalNumber
MAX-ACCESS  not-accessible
STATUS  current
DESCRIPTION
  "Uniquely identifies the interval."
::= { optIfOTSnSinkIntervalEntry 1 }

optIfOTSnSinkIntervalSuspectedFlag OBJECT-TYPE

SYNTAX  TruthValue
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "If true, the data in this entry may be unreliable."
::= { optIfOTSnSinkIntervalEntry 2 }

optIfOTSnSinkIntervalLastInputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The last optical power monitored at the input during the
   interval."
::= { optIfOTSnSinkIntervalEntry 3 }

optIfOTSnSinkIntervalLowInputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The lowest optical power monitored at the input during the
   interval."
::= { optIfOTSnSinkIntervalEntry 4 }

Lam, et al. Standards Track [Page 46] RFC 3591 Optical Interface Type MIB September 2003

optIfOTSnSinkIntervalHighInputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The highest optical power monitored at the input during the
   interval."
::= { optIfOTSnSinkIntervalEntry 5 }

optIfOTSnSinkIntervalLastOutputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The last optical power monitored at the output during the
   interval."
::= { optIfOTSnSinkIntervalEntry 6 }

optIfOTSnSinkIntervalLowOutputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The lowest optical power monitored at the output during the
   interval."
::= { optIfOTSnSinkIntervalEntry 7 }

optIfOTSnSinkIntervalHighOutputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The highest optical power monitored at the output during the
   interval."
::= { optIfOTSnSinkIntervalEntry 8 }

– OTSn sink current day table – Contains data for the current 24-hour performance – monitoring interval.

optIfOTSnSinkCurDayTable OBJECT-TYPE

SYNTAX  SEQUENCE OF OptIfOTSnSinkCurDayEntry
MAX-ACCESS  not-accessible
STATUS  current

Lam, et al. Standards Track [Page 47] RFC 3591 Optical Interface Type MIB September 2003

DESCRIPTION
  "A table of OTSn sink performance monitoring information for
   the current 24-hour interval."
::= { optIfOTSn 4 }

optIfOTSnSinkCurDayEntry OBJECT-TYPE

SYNTAX  OptIfOTSnSinkCurDayEntry
MAX-ACCESS  not-accessible
STATUS  current
DESCRIPTION
  "A conceptual row that contains OTSn sink performance
   monitoring information of an interface for the current
   24-hour interval."
INDEX  { ifIndex }
::= { optIfOTSnSinkCurDayTable 1 }

OptIfOTSnSinkCurDayEntry ::=

SEQUENCE {
  optIfOTSnSinkCurDaySuspectedFlag    TruthValue,
  optIfOTSnSinkCurDayLowInputPower    Integer32,
  optIfOTSnSinkCurDayHighInputPower   Integer32,
  optIfOTSnSinkCurDayLowOutputPower   Integer32,
  optIfOTSnSinkCurDayHighOutputPower  Integer32
  }

optIfOTSnSinkCurDaySuspectedFlag OBJECT-TYPE

SYNTAX  TruthValue
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "If true, the data in this entry may be unreliable."
::= { optIfOTSnSinkCurDayEntry 1 }

optIfOTSnSinkCurDayLowInputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The lowest optical power monitored at the input during the
   current 24-hour interval."
::= { optIfOTSnSinkCurDayEntry 2 }

optIfOTSnSinkCurDayHighInputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current

Lam, et al. Standards Track [Page 48] RFC 3591 Optical Interface Type MIB September 2003

DESCRIPTION
  "The highest optical power monitored at the input during the
   current 24-hour interval."
::= { optIfOTSnSinkCurDayEntry 3 }

optIfOTSnSinkCurDayLowOutputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The lowest optical power monitored at the output during the
   current 24-hour interval."
::= { optIfOTSnSinkCurDayEntry 4 }

optIfOTSnSinkCurDayHighOutputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The highest optical power monitored at the output during the
   current 24-hour interval."
::= { optIfOTSnSinkCurDayEntry 5 }

– OTSn sink previous day table – Contains data for the previous 24-hour performance – monitoring interval.

optIfOTSnSinkPrevDayTable OBJECT-TYPE

SYNTAX  SEQUENCE OF OptIfOTSnSinkPrevDayEntry
MAX-ACCESS  not-accessible
STATUS  current
DESCRIPTION
  "A table of OTSn sink performance monitoring information for
   the previous 24-hour interval."
::= { optIfOTSn 5 }

optIfOTSnSinkPrevDayEntry OBJECT-TYPE

SYNTAX  OptIfOTSnSinkPrevDayEntry
MAX-ACCESS  not-accessible
STATUS  current
DESCRIPTION
  "A conceptual row that contains OTSn sink performance
   monitoring information of an interface for the previous
   24-hour interval."
INDEX  { ifIndex }
::= { optIfOTSnSinkPrevDayTable 1 }

Lam, et al. Standards Track [Page 49] RFC 3591 Optical Interface Type MIB September 2003

OptIfOTSnSinkPrevDayEntry ::=

SEQUENCE {
  optIfOTSnSinkPrevDaySuspectedFlag    TruthValue,
  optIfOTSnSinkPrevDayLastInputPower   Integer32,
  optIfOTSnSinkPrevDayLowInputPower    Integer32,
  optIfOTSnSinkPrevDayHighInputPower   Integer32,
  optIfOTSnSinkPrevDayLastOutputPower  Integer32,
  optIfOTSnSinkPrevDayLowOutputPower   Integer32,
  optIfOTSnSinkPrevDayHighOutputPower  Integer32
  }

optIfOTSnSinkPrevDaySuspectedFlag OBJECT-TYPE

SYNTAX  TruthValue
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "If true, the data in this entry may be unreliable."
::= { optIfOTSnSinkPrevDayEntry 1 }

optIfOTSnSinkPrevDayLastInputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The last optical power monitored at the input during the
   previous 24-hour interval."
::= { optIfOTSnSinkPrevDayEntry 2 }

optIfOTSnSinkPrevDayLowInputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The lowest optical power monitored at the input during the
   previous 24-hour interval."
::= { optIfOTSnSinkPrevDayEntry 3 }

optIfOTSnSinkPrevDayHighInputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The highest optical power monitored at the input during the
   previous 24-hour interval."
::= { optIfOTSnSinkPrevDayEntry 4 }

Lam, et al. Standards Track [Page 50] RFC 3591 Optical Interface Type MIB September 2003

optIfOTSnSinkPrevDayLastOutputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The last optical power monitored at the output during the
   previous 24-hour interval."
::= { optIfOTSnSinkPrevDayEntry 5 }

optIfOTSnSinkPrevDayLowOutputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The lowest optical power monitored at the output during the
   previous 24-hour interval."
::= { optIfOTSnSinkPrevDayEntry 6 }

optIfOTSnSinkPrevDayHighOutputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The highest optical power monitored at the output during the
   previous 24-hour interval."
::= { optIfOTSnSinkPrevDayEntry 7 }

– OTSn source current table – Contains data for the current 15-minute performance monitoring – interval.

optIfOTSnSrcCurrentTable OBJECT-TYPE

SYNTAX  SEQUENCE OF OptIfOTSnSrcCurrentEntry
MAX-ACCESS  not-accessible
STATUS  current
DESCRIPTION
  "A table of OTSn source performance monitoring information for
   the current 15-minute interval."
::= { optIfOTSn 6 }

optIfOTSnSrcCurrentEntry OBJECT-TYPE

SYNTAX  OptIfOTSnSrcCurrentEntry
MAX-ACCESS  not-accessible
STATUS  current
DESCRIPTION

Lam, et al. Standards Track [Page 51] RFC 3591 Optical Interface Type MIB September 2003

  "A conceptual row that contains OTSn source performance
   monitoring information of an interface for the current
   15-minute interval."
INDEX  { ifIndex }
::= { optIfOTSnSrcCurrentTable 1 }

OptIfOTSnSrcCurrentEntry ::=

SEQUENCE {
  optIfOTSnSrcCurrentSuspectedFlag              TruthValue,
  optIfOTSnSrcCurrentOutputPower                Integer32,
  optIfOTSnSrcCurrentLowOutputPower             Integer32,
  optIfOTSnSrcCurrentHighOutputPower            Integer32,
  optIfOTSnSrcCurrentLowerOutputPowerThreshold  Integer32,
  optIfOTSnSrcCurrentUpperOutputPowerThreshold  Integer32,
  optIfOTSnSrcCurrentInputPower                 Integer32,
  optIfOTSnSrcCurrentLowInputPower              Integer32,
  optIfOTSnSrcCurrentHighInputPower             Integer32,
  optIfOTSnSrcCurrentLowerInputPowerThreshold   Integer32,
  optIfOTSnSrcCurrentUpperInputPowerThreshold   Integer32
  }

optIfOTSnSrcCurrentSuspectedFlag OBJECT-TYPE

SYNTAX  TruthValue
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "If true, the data in this entry may be unreliable."
::= { optIfOTSnSrcCurrentEntry 1 }

optIfOTSnSrcCurrentOutputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The optical power monitored at the output."
::= { optIfOTSnSrcCurrentEntry 2 }

optIfOTSnSrcCurrentLowOutputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The lowest optical power monitored at the output during the
   current 15-minute interval."
::= { optIfOTSnSrcCurrentEntry 3 }

Lam, et al. Standards Track [Page 52] RFC 3591 Optical Interface Type MIB September 2003

optIfOTSnSrcCurrentHighOutputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The highest optical power monitored at the output during the
   current 15-minute interval."
::= { optIfOTSnSrcCurrentEntry 4 }

optIfOTSnSrcCurrentLowerOutputPowerThreshold OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-write
STATUS  current
DESCRIPTION
  "The lower limit threshold on output power.  If
   optIfOTSnSrcCurrentOutputPower drops to this value or below,
   a Threshold Crossing Alert (TCA) should be sent."
::= { optIfOTSnSrcCurrentEntry 5 }

optIfOTSnSrcCurrentUpperOutputPowerThreshold OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-write
STATUS  current
DESCRIPTION
  "The upper limit threshold on output power.  If
   optIfOTSnSrcCurrentOutputPower reaches or exceeds this value,
   a Threshold Crossing Alert (TCA) should be sent."
::= { optIfOTSnSrcCurrentEntry 6 }

optIfOTSnSrcCurrentInputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The optical power monitored at the input."
::= { optIfOTSnSrcCurrentEntry 7 }

optIfOTSnSrcCurrentLowInputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION

Lam, et al. Standards Track [Page 53] RFC 3591 Optical Interface Type MIB September 2003

  "The lowest optical power monitored at the input during the
   current 15-minute interval."
::= { optIfOTSnSrcCurrentEntry 8 }

optIfOTSnSrcCurrentHighInputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The highest optical power monitored at the input during the
   current 15-minute interval."
::= { optIfOTSnSrcCurrentEntry 9 }

optIfOTSnSrcCurrentLowerInputPowerThreshold OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-write
STATUS  current
DESCRIPTION
  "The lower limit threshold on input power.  If
   optIfOTSnSrcCurrentInputPower drops to this value or below,
   a Threshold Crossing Alert (TCA) should be sent."
::= { optIfOTSnSrcCurrentEntry 10 }

optIfOTSnSrcCurrentUpperInputPowerThreshold OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-write
STATUS  current
DESCRIPTION
  "The upper limit threshold on input power.  If
   optIfOTSnSrcCurrentInputPower reaches or exceeds this value,
   a Threshold Crossing Alert (TCA) should be sent."
::= { optIfOTSnSrcCurrentEntry 11 }

– OTSn source interval table – Contains data for previous 15-minute performance monitoring – intervals.

optIfOTSnSrcIntervalTable OBJECT-TYPE

SYNTAX  SEQUENCE OF OptIfOTSnSrcIntervalEntry
MAX-ACCESS  not-accessible
STATUS  current
DESCRIPTION
  "A table of historical OTSn source performance monitoring
   information."
::= { optIfOTSn 7 }

Lam, et al. Standards Track [Page 54] RFC 3591 Optical Interface Type MIB September 2003

optIfOTSnSrcIntervalEntry OBJECT-TYPE

SYNTAX  OptIfOTSnSrcIntervalEntry
MAX-ACCESS  not-accessible
STATUS  current
DESCRIPTION
  "A conceptual row that contains OTSn source performance
   monitoring information of an interface during a particular
   historical interval."
INDEX  { ifIndex, optIfOTSnSrcIntervalNumber }
::= { optIfOTSnSrcIntervalTable 1 }

OptIfOTSnSrcIntervalEntry ::=

SEQUENCE {
  optIfOTSnSrcIntervalNumber           OptIfIntervalNumber,
  optIfOTSnSrcIntervalSuspectedFlag    TruthValue,
  optIfOTSnSrcIntervalLastOutputPower  Integer32,
  optIfOTSnSrcIntervalLowOutputPower   Integer32,
  optIfOTSnSrcIntervalHighOutputPower  Integer32,
  optIfOTSnSrcIntervalLastInputPower   Integer32,
  optIfOTSnSrcIntervalLowInputPower    Integer32,
  optIfOTSnSrcIntervalHighInputPower   Integer32
  }

optIfOTSnSrcIntervalNumber OBJECT-TYPE

SYNTAX  OptIfIntervalNumber
MAX-ACCESS  not-accessible
STATUS  current
DESCRIPTION
  "Uniquely identifies the interval."
::= { optIfOTSnSrcIntervalEntry 1 }

optIfOTSnSrcIntervalSuspectedFlag OBJECT-TYPE

SYNTAX  TruthValue
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "If true, the data in this entry may be unreliable."
::= { optIfOTSnSrcIntervalEntry 2 }

optIfOTSnSrcIntervalLastOutputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The last optical power monitored at the output during the
   interval."
::= { optIfOTSnSrcIntervalEntry 3 }

Lam, et al. Standards Track [Page 55] RFC 3591 Optical Interface Type MIB September 2003

optIfOTSnSrcIntervalLowOutputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The lowest optical power monitored at the output during the
   interval."
::= { optIfOTSnSrcIntervalEntry 4 }

optIfOTSnSrcIntervalHighOutputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The highest optical power monitored at the output during the
   interval."
::= { optIfOTSnSrcIntervalEntry 5 }

optIfOTSnSrcIntervalLastInputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The last optical power monitored at the input during the
   interval."
::= { optIfOTSnSrcIntervalEntry 6 }

optIfOTSnSrcIntervalLowInputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The lowest optical power monitored at the input during the
   interval."
::= { optIfOTSnSrcIntervalEntry 7 }

optIfOTSnSrcIntervalHighInputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The highest optical power monitored at the input during the
   interval."

Lam, et al. Standards Track [Page 56] RFC 3591 Optical Interface Type MIB September 2003

::= { optIfOTSnSrcIntervalEntry 8 }

– OTSn source current day table – Contains data for the current 24-hour performance – monitoring interval.

optIfOTSnSrcCurDayTable OBJECT-TYPE

SYNTAX  SEQUENCE OF OptIfOTSnSrcCurDayEntry
MAX-ACCESS  not-accessible
STATUS  current
DESCRIPTION
  "A table of OTSn source performance monitoring information for
   the current 24-hour interval."
::= { optIfOTSn 8 }

optIfOTSnSrcCurDayEntry OBJECT-TYPE

SYNTAX  OptIfOTSnSrcCurDayEntry
MAX-ACCESS  not-accessible
STATUS  current
DESCRIPTION
  "A conceptual row that contains OTSn source performance
   monitoring information of an interface for the current
   24-hour interval."
INDEX  { ifIndex }
::= { optIfOTSnSrcCurDayTable 1 }

OptIfOTSnSrcCurDayEntry ::=

SEQUENCE {
  optIfOTSnSrcCurDaySuspectedFlag    TruthValue,
  optIfOTSnSrcCurDayLowOutputPower   Integer32,
  optIfOTSnSrcCurDayHighOutputPower  Integer32,
  optIfOTSnSrcCurDayLowInputPower    Integer32,
  optIfOTSnSrcCurDayHighInputPower   Integer32
  }

optIfOTSnSrcCurDaySuspectedFlag OBJECT-TYPE

SYNTAX  TruthValue
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "If true, the data in this entry may be unreliable."
::= { optIfOTSnSrcCurDayEntry 1 }

optIfOTSnSrcCurDayLowOutputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only

Lam, et al. Standards Track [Page 57] RFC 3591 Optical Interface Type MIB September 2003

STATUS  current
DESCRIPTION
  "The lowest optical power monitored at the output during the
   current 24-hour interval."
::= { optIfOTSnSrcCurDayEntry 2 }

optIfOTSnSrcCurDayHighOutputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The highest optical power monitored at the output during the
   current 24-hour interval."
::= { optIfOTSnSrcCurDayEntry 3 }

optIfOTSnSrcCurDayLowInputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The lowest optical power monitored at the input during the
   current 24-hour interval."
::= { optIfOTSnSrcCurDayEntry 4 }

optIfOTSnSrcCurDayHighInputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The highest optical power monitored at the input during the
   current 24-hour interval."
::= { optIfOTSnSrcCurDayEntry 5 }

– OTSn source previous day table – Contains data for the previous 24-hour performance – monitoring interval.

optIfOTSnSrcPrevDayTable OBJECT-TYPE

SYNTAX  SEQUENCE OF OptIfOTSnSrcPrevDayEntry
MAX-ACCESS  not-accessible
STATUS  current
DESCRIPTION
  "A table of OTSn source performance monitoring information for
   the previous 24-hour interval."
::= { optIfOTSn 9 }

Lam, et al. Standards Track [Page 58] RFC 3591 Optical Interface Type MIB September 2003

optIfOTSnSrcPrevDayEntry OBJECT-TYPE

SYNTAX  OptIfOTSnSrcPrevDayEntry
MAX-ACCESS  not-accessible
STATUS  current
DESCRIPTION
  "A conceptual row that contains OTSn source performance
   monitoring information of an interface for the previous
   24-hour interval."
INDEX  { ifIndex }
::= { optIfOTSnSrcPrevDayTable 1 }

OptIfOTSnSrcPrevDayEntry ::=

SEQUENCE {
  optIfOTSnSrcPrevDaySuspectedFlag    TruthValue,
  optIfOTSnSrcPrevDayLastOutputPower  Integer32,
  optIfOTSnSrcPrevDayLowOutputPower   Integer32,
  optIfOTSnSrcPrevDayHighOutputPower  Integer32,
  optIfOTSnSrcPrevDayLastInputPower   Integer32,
  optIfOTSnSrcPrevDayLowInputPower    Integer32,
  optIfOTSnSrcPrevDayHighInputPower   Integer32
  }

optIfOTSnSrcPrevDaySuspectedFlag OBJECT-TYPE

SYNTAX  TruthValue
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "If true, the data in this entry may be unreliable."
::= { optIfOTSnSrcPrevDayEntry 1 }

optIfOTSnSrcPrevDayLastOutputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The last optical power monitored at the output during the
   previous 24-hour interval."
::= { optIfOTSnSrcPrevDayEntry 2 }

optIfOTSnSrcPrevDayLowOutputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The lowest optical power monitored at the output during the
   previous 24-hour interval."

Lam, et al. Standards Track [Page 59] RFC 3591 Optical Interface Type MIB September 2003

::= { optIfOTSnSrcPrevDayEntry 3 }

optIfOTSnSrcPrevDayHighOutputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The highest optical power monitored at the output during the
   previous 24-hour interval."
::= { optIfOTSnSrcPrevDayEntry 4 }

optIfOTSnSrcPrevDayLastInputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The last optical power monitored at the input during the
   previous 24-hour interval."
::= { optIfOTSnSrcPrevDayEntry 5 }

optIfOTSnSrcPrevDayLowInputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The lowest optical power monitored at the input during the
   previous 24-hour interval."
::= { optIfOTSnSrcPrevDayEntry 6 }

optIfOTSnSrcPrevDayHighInputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The highest optical power monitored at the input during the
   previous 24-hour interval."
::= { optIfOTSnSrcPrevDayEntry 7 }

– the optIfOMSn group – This group handles the configuration and performance monitoring – information for OMS layers.

– OMSn config table

Lam, et al. Standards Track [Page 60] RFC 3591 Optical Interface Type MIB September 2003

optIfOMSnConfigTable OBJECT-TYPE

SYNTAX  SEQUENCE OF OptIfOMSnConfigEntry
MAX-ACCESS  not-accessible
STATUS  current
DESCRIPTION
  "A table of OMSn configuration information."
::= { optIfOMSn 1 }

optIfOMSnConfigEntry OBJECT-TYPE

SYNTAX  OptIfOMSnConfigEntry
MAX-ACCESS  not-accessible
STATUS  current
DESCRIPTION
  "A conceptual row that contains OMSn configuration
   information of an interface."
INDEX  { ifIndex }
::= { optIfOMSnConfigTable 1 }

OptIfOMSnConfigEntry ::=

SEQUENCE {
  optIfOMSnDirectionality OptIfDirectionality,
  optIfOMSnCurrentStatus  BITS
  }

optIfOMSnDirectionality OBJECT-TYPE

SYNTAX  OptIfDirectionality
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "Indicates the directionality of the entity."
::= { optIfOMSnConfigEntry 1 }

optIfOMSnCurrentStatus OBJECT-TYPE

SYNTAX  BITS {
  ssfP(0),
  ssfO(1),
  ssf(2),
  bdiP(3),
  bdiO(4),
  bdi(5),
  losP(6)
  }
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "Indicates the defect condition of the entity, if any.
   This object is applicable only to full capability
   systems whose interface type is IaDI and for which

Lam, et al. Standards Track [Page 61] RFC 3591 Optical Interface Type MIB September 2003

   optIfOMSnDirectionality has the value sink(1) or
   bidirectional(3)."
::= { optIfOMSnConfigEntry 2 }

– OMSn sink current table – Contains data for the current 15-minute performance monitoring – interval.

optIfOMSnSinkCurrentTable OBJECT-TYPE

SYNTAX  SEQUENCE OF OptIfOMSnSinkCurrentEntry
MAX-ACCESS  not-accessible
STATUS  current
DESCRIPTION
  "A table of OMSn sink performance monitoring information for
   the current 15-minute interval."
::= { optIfOMSn 2 }

optIfOMSnSinkCurrentEntry OBJECT-TYPE

SYNTAX  OptIfOMSnSinkCurrentEntry
MAX-ACCESS  not-accessible
STATUS  current
DESCRIPTION
  "A conceptual row that contains OMSn sink performance
   monitoring information of an interface for the current
   15-minute interval."
INDEX  { ifIndex }
::= { optIfOMSnSinkCurrentTable 1 }

OptIfOMSnSinkCurrentEntry ::=

SEQUENCE {
  optIfOMSnSinkCurrentSuspectedFlag              TruthValue,
  optIfOMSnSinkCurrentAggregatedInputPower       Integer32,
  optIfOMSnSinkCurrentLowAggregatedInputPower    Integer32,
  optIfOMSnSinkCurrentHighAggregatedInputPower   Integer32,
  optIfOMSnSinkCurrentLowerInputPowerThreshold   Integer32,
  optIfOMSnSinkCurrentUpperInputPowerThreshold   Integer32,
  optIfOMSnSinkCurrentOutputPower                Integer32,
  optIfOMSnSinkCurrentLowOutputPower             Integer32,
  optIfOMSnSinkCurrentHighOutputPower            Integer32,
  optIfOMSnSinkCurrentLowerOutputPowerThreshold  Integer32,
  optIfOMSnSinkCurrentUpperOutputPowerThreshold  Integer32
  }

optIfOMSnSinkCurrentSuspectedFlag OBJECT-TYPE

SYNTAX  TruthValue
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION

Lam, et al. Standards Track [Page 62] RFC 3591 Optical Interface Type MIB September 2003

  "If true, the data in this entry may be unreliable."
::= { optIfOMSnSinkCurrentEntry 1 }

optIfOMSnSinkCurrentAggregatedInputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The aggregated optical power of all the DWDM input
   channels."
::= { optIfOMSnSinkCurrentEntry 2 }

optIfOMSnSinkCurrentLowAggregatedInputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The lowest aggregated optical power of all the DWDM input
   channels during the current 15-minute interval."
::= { optIfOMSnSinkCurrentEntry 3 }

optIfOMSnSinkCurrentHighAggregatedInputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The highest aggregated optical power of all the DWDM input
   channels during the current 15-minute interval."
::= { optIfOMSnSinkCurrentEntry 4 }

optIfOMSnSinkCurrentLowerInputPowerThreshold OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-write
STATUS  current
DESCRIPTION
  "The lower limit threshold on aggregated input power.  If
   optIfOMSnSinkCurrentAggregatedInputPower drops to this value
   or below, a Threshold Crossing Alert (TCA) should be sent."
::= { optIfOMSnSinkCurrentEntry 5 }

optIfOMSnSinkCurrentUpperInputPowerThreshold OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-write

Lam, et al. Standards Track [Page 63] RFC 3591 Optical Interface Type MIB September 2003

STATUS  current
DESCRIPTION
  "The upper limit threshold on aggregated input power.  If
   optIfOMSnSinkCurrentAggregatedInputPower reaches or exceeds
   this value, a Threshold Crossing Alert (TCA) should be sent."
::= { optIfOMSnSinkCurrentEntry 6 }

optIfOMSnSinkCurrentOutputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The optical power monitored at the output."
::= { optIfOMSnSinkCurrentEntry 7 }

optIfOMSnSinkCurrentLowOutputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The lowest optical power monitored at the output
   during the current 15-minute interval."
::= { optIfOMSnSinkCurrentEntry 8 }

optIfOMSnSinkCurrentHighOutputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The highest optical power monitored at the output
   during the current 15-minute interval."
::= { optIfOMSnSinkCurrentEntry 9 }

optIfOMSnSinkCurrentLowerOutputPowerThreshold OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-write
STATUS  current
DESCRIPTION
  "The lower limit threshold on output power.  If
   optIfOMSnSinkCurrentOutputPower drops to this value
   or below, a Threshold Crossing Alert (TCA) should be sent."
::= { optIfOMSnSinkCurrentEntry 10 }

optIfOMSnSinkCurrentUpperOutputPowerThreshold OBJECT-TYPE

Lam, et al. Standards Track [Page 64] RFC 3591 Optical Interface Type MIB September 2003

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-write
STATUS  current
DESCRIPTION
  "The upper limit threshold on output power.  If
   optIfOMSnSinkCurrentOutputPower reaches or exceeds
   this value, a Threshold Crossing Alert (TCA) should be sent."
::= { optIfOMSnSinkCurrentEntry 11 }

– OMSn sink interval table – Contains data for previous 15-minute performance monitoring – intervals.

optIfOMSnSinkIntervalTable OBJECT-TYPE

SYNTAX  SEQUENCE OF OptIfOMSnSinkIntervalEntry
MAX-ACCESS  not-accessible
STATUS  current
DESCRIPTION
  "A table of historical OMSn sink performance monitoring
   information."
::= { optIfOMSn 3 }

optIfOMSnSinkIntervalEntry OBJECT-TYPE

SYNTAX  OptIfOMSnSinkIntervalEntry
MAX-ACCESS  not-accessible
STATUS  current
DESCRIPTION
  "A conceptual row that contains OMSn sink performance
   monitoring information of an interface during a particular
   historical interval."
INDEX  { ifIndex, optIfOMSnSinkIntervalNumber }
::= { optIfOMSnSinkIntervalTable 1 }

OptIfOMSnSinkIntervalEntry ::=

SEQUENCE {
  optIfOMSnSinkIntervalNumber                    OptIfIntervalNumber,
  optIfOMSnSinkIntervalSuspectedFlag             TruthValue,
  optIfOMSnSinkIntervalLastAggregatedInputPower  Integer32,
  optIfOMSnSinkIntervalLowAggregatedInputPower   Integer32,
  optIfOMSnSinkIntervalHighAggregatedInputPower  Integer32,
  optIfOMSnSinkIntervalLastOutputPower           Integer32,
  optIfOMSnSinkIntervalLowOutputPower            Integer32,
  optIfOMSnSinkIntervalHighOutputPower           Integer32
  }

optIfOMSnSinkIntervalNumber OBJECT-TYPE

SYNTAX  OptIfIntervalNumber

Lam, et al. Standards Track [Page 65] RFC 3591 Optical Interface Type MIB September 2003

MAX-ACCESS  not-accessible
STATUS  current
DESCRIPTION
  "Uniquely identifies the interval."
::= { optIfOMSnSinkIntervalEntry 1 }

optIfOMSnSinkIntervalSuspectedFlag OBJECT-TYPE

SYNTAX  TruthValue
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "If true, the data in this entry may be unreliable."
::= { optIfOMSnSinkIntervalEntry 2 }

optIfOMSnSinkIntervalLastAggregatedInputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The last aggregated optical power of all the DWDM input
   channels during the interval."
::= { optIfOMSnSinkIntervalEntry 3 }

optIfOMSnSinkIntervalLowAggregatedInputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The lowest aggregated optical power of all the DWDM input
   channels during the interval."
::= { optIfOMSnSinkIntervalEntry 4 }

optIfOMSnSinkIntervalHighAggregatedInputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The highest aggregated optical power of all the DWDM input
   channels during the interval."
::= { optIfOMSnSinkIntervalEntry 5 }

optIfOMSnSinkIntervalLastOutputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only

Lam, et al. Standards Track [Page 66] RFC 3591 Optical Interface Type MIB September 2003

STATUS  current
DESCRIPTION
  "The last optical power at the output
   during the interval."
::= { optIfOMSnSinkIntervalEntry 6 }

optIfOMSnSinkIntervalLowOutputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The lowest optical power at the output
   during the interval."
::= { optIfOMSnSinkIntervalEntry 7 }

optIfOMSnSinkIntervalHighOutputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The highest optical power at the output
   during the interval."
::= { optIfOMSnSinkIntervalEntry 8 }

– OMSn sink current day table – Contains data for the current 24-hour performance – monitoring interval.

optIfOMSnSinkCurDayTable OBJECT-TYPE

SYNTAX  SEQUENCE OF OptIfOMSnSinkCurDayEntry
MAX-ACCESS  not-accessible
STATUS  current
DESCRIPTION
  "A table of OMSn sink performance monitoring information for
   the current 24-hour interval."
::= { optIfOMSn 4 }

optIfOMSnSinkCurDayEntry OBJECT-TYPE

SYNTAX  OptIfOMSnSinkCurDayEntry
MAX-ACCESS  not-accessible
STATUS  current
DESCRIPTION
  "A conceptual row that contains OMSn sink performance
   monitoring information of an interface for the current
   24-hour interval."
INDEX  { ifIndex }

Lam, et al. Standards Track [Page 67] RFC 3591 Optical Interface Type MIB September 2003

::= { optIfOMSnSinkCurDayTable 1 }

OptIfOMSnSinkCurDayEntry ::=

SEQUENCE {
  optIfOMSnSinkCurDaySuspectedFlag             TruthValue,
  optIfOMSnSinkCurDayLowAggregatedInputPower   Integer32,
  optIfOMSnSinkCurDayHighAggregatedInputPower  Integer32,
  optIfOMSnSinkCurDayLowOutputPower            Integer32,
  optIfOMSnSinkCurDayHighOutputPower           Integer32
  }

optIfOMSnSinkCurDaySuspectedFlag OBJECT-TYPE

SYNTAX  TruthValue
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "If true, the data in this entry may be unreliable."
::= { optIfOMSnSinkCurDayEntry 1 }

optIfOMSnSinkCurDayLowAggregatedInputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The lowest aggregated optical power of all the DWDM input
   channels during the current 24-hour interval."
::= { optIfOMSnSinkCurDayEntry 2 }

optIfOMSnSinkCurDayHighAggregatedInputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The highest aggregated optical power of all the DWDM input
   channels during the current 24-hour interval."
::= { optIfOMSnSinkCurDayEntry 3 }

optIfOMSnSinkCurDayLowOutputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The lowest optical power at the output
   during the current 24-hour interval."
::= { optIfOMSnSinkCurDayEntry 4 }

Lam, et al. Standards Track [Page 68] RFC 3591 Optical Interface Type MIB September 2003

optIfOMSnSinkCurDayHighOutputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The highest  optical power at the output
   during the current 24-hour interval."
::= { optIfOMSnSinkCurDayEntry 5 }

– OMSn sink previous day table – Contains data for the previous 24-hour performance – monitoring interval.

optIfOMSnSinkPrevDayTable OBJECT-TYPE

SYNTAX  SEQUENCE OF OptIfOMSnSinkPrevDayEntry
MAX-ACCESS  not-accessible
STATUS  current
DESCRIPTION
  "A table of OMSn sink performance monitoring information for
   the previous 24-hour interval."
::= { optIfOMSn 5 }

optIfOMSnSinkPrevDayEntry OBJECT-TYPE

SYNTAX  OptIfOMSnSinkPrevDayEntry
MAX-ACCESS  not-accessible
STATUS  current
DESCRIPTION
  "A conceptual row that contains OMSn sink performance
   monitoring information of an interface for the previous
   24-hour interval."
INDEX  { ifIndex }
::= { optIfOMSnSinkPrevDayTable 1 }

OptIfOMSnSinkPrevDayEntry ::=

SEQUENCE {
  optIfOMSnSinkPrevDaySuspectedFlag             TruthValue,
  optIfOMSnSinkPrevDayLastAggregatedInputPower  Integer32,
  optIfOMSnSinkPrevDayLowAggregatedInputPower   Integer32,
  optIfOMSnSinkPrevDayHighAggregatedInputPower  Integer32,
  optIfOMSnSinkPrevDayLastOutputPower           Integer32,
  optIfOMSnSinkPrevDayLowOutputPower            Integer32,
  optIfOMSnSinkPrevDayHighOutputPower           Integer32
  }

optIfOMSnSinkPrevDaySuspectedFlag OBJECT-TYPE

SYNTAX  TruthValue
MAX-ACCESS  read-only

Lam, et al. Standards Track [Page 69] RFC 3591 Optical Interface Type MIB September 2003

STATUS  current
DESCRIPTION
  "If true, the data in this entry may be unreliable."
::= { optIfOMSnSinkPrevDayEntry 1 }

optIfOMSnSinkPrevDayLastAggregatedInputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The last aggregated optical power of all the DWDM input
   channels during the previous 24-hour interval."
::= { optIfOMSnSinkPrevDayEntry 2 }

optIfOMSnSinkPrevDayLowAggregatedInputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The lowest aggregated optical power of all the DWDM input
   channels during the previous 24-hour interval."
::= { optIfOMSnSinkPrevDayEntry 3 }

optIfOMSnSinkPrevDayHighAggregatedInputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The highest aggregated optical power of all the DWDM input
   channels during the previous 24-hour interval."
::= { optIfOMSnSinkPrevDayEntry 4 }

optIfOMSnSinkPrevDayLastOutputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The last  optical power at the output
   during the previous 24-hour interval."
::= { optIfOMSnSinkPrevDayEntry 5 }

optIfOMSnSinkPrevDayLowOutputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"

Lam, et al. Standards Track [Page 70] RFC 3591 Optical Interface Type MIB September 2003

MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The lowest optical power at the output
   during the previous 24-hour interval."
::= { optIfOMSnSinkPrevDayEntry 6 }

optIfOMSnSinkPrevDayHighOutputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The highest optical power at the output
   during the previous 24-hour interval."
::= { optIfOMSnSinkPrevDayEntry 7 }

– OMSn source current table – Contains data for the current 15-minute performance monitoring – interval.

optIfOMSnSrcCurrentTable OBJECT-TYPE

SYNTAX  SEQUENCE OF OptIfOMSnSrcCurrentEntry
MAX-ACCESS  not-accessible
STATUS  current
DESCRIPTION
  "A table of OMSn source performance monitoring information for
   the current 15-minute interval."
::= { optIfOMSn 6 }

optIfOMSnSrcCurrentEntry OBJECT-TYPE

SYNTAX  OptIfOMSnSrcCurrentEntry
MAX-ACCESS  not-accessible
STATUS  current
DESCRIPTION
  "A conceptual row that contains OMSn source performance
   monitoring information of an interface for the current
   15-minute interval."
INDEX  { ifIndex }
::= { optIfOMSnSrcCurrentTable 1 }

OptIfOMSnSrcCurrentEntry ::=

SEQUENCE {
  optIfOMSnSrcCurrentSuspectedFlag              TruthValue,
  optIfOMSnSrcCurrentOutputPower                Integer32,
  optIfOMSnSrcCurrentLowOutputPower             Integer32,
  optIfOMSnSrcCurrentHighOutputPower            Integer32,
  optIfOMSnSrcCurrentLowerOutputPowerThreshold  Integer32,

Lam, et al. Standards Track [Page 71] RFC 3591 Optical Interface Type MIB September 2003

  optIfOMSnSrcCurrentUpperOutputPowerThreshold  Integer32,
  optIfOMSnSrcCurrentAggregatedInputPower       Integer32,
  optIfOMSnSrcCurrentLowAggregatedInputPower    Integer32,
  optIfOMSnSrcCurrentHighAggregatedInputPower   Integer32,
  optIfOMSnSrcCurrentLowerInputPowerThreshold   Integer32,
  optIfOMSnSrcCurrentUpperInputPowerThreshold   Integer32
  }

optIfOMSnSrcCurrentSuspectedFlag OBJECT-TYPE

SYNTAX  TruthValue
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "If true, the data in this entry may be unreliable."
::= { optIfOMSnSrcCurrentEntry 1 }

optIfOMSnSrcCurrentOutputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The optical power monitored at the output."
::= { optIfOMSnSrcCurrentEntry 2 }

optIfOMSnSrcCurrentLowOutputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The lowest optical power monitored at the output during the
   current 15-minute interval."
::= { optIfOMSnSrcCurrentEntry 3 }

optIfOMSnSrcCurrentHighOutputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The highest optical power monitored at the output during the
   current 15-minute interval."
::= { optIfOMSnSrcCurrentEntry 4 }

optIfOMSnSrcCurrentLowerOutputPowerThreshold OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"

Lam, et al. Standards Track [Page 72] RFC 3591 Optical Interface Type MIB September 2003

MAX-ACCESS  read-write
STATUS  current
DESCRIPTION
  "The lower limit threshold on output power.  If
   optIfOMSnSrcCurrentOutputPower drops to this value or below,
   a Threshold Crossing Alert (TCA) should be sent."
::= { optIfOMSnSrcCurrentEntry 5 }

optIfOMSnSrcCurrentUpperOutputPowerThreshold OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-write
STATUS  current
DESCRIPTION
  "The upper limit threshold on output power.  If
   optIfOMSnSrcCurrentOutputPower reaches or exceeds this value,
   a Threshold Crossing Alert (TCA) should be sent."
::= { optIfOMSnSrcCurrentEntry 6 }

optIfOMSnSrcCurrentAggregatedInputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The aggregated optical power at the input."
::= { optIfOMSnSrcCurrentEntry 7 }

optIfOMSnSrcCurrentLowAggregatedInputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The lowest aggregated optical power at the input
   during the current 15-minute interval."
::= { optIfOMSnSrcCurrentEntry 8 }

optIfOMSnSrcCurrentHighAggregatedInputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The highest aggregated optical power at the input
   during the current 15-minute interval."
::= { optIfOMSnSrcCurrentEntry 9 }

Lam, et al. Standards Track [Page 73] RFC 3591 Optical Interface Type MIB September 2003

optIfOMSnSrcCurrentLowerInputPowerThreshold OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-write
STATUS  current
DESCRIPTION
  "The lower limit threshold on aggregated input power.  If
   optIfOMSnSrcCurrentAggregatedInputPower drops to this value
   or below, a Threshold Crossing Alert (TCA) should be sent."
::= { optIfOMSnSrcCurrentEntry 10 }

optIfOMSnSrcCurrentUpperInputPowerThreshold OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-write
STATUS  current
DESCRIPTION
  "The upper limit threshold on aggregated input power.  If
   optIfOMSnSrcCurrentAggregatedInputPower reaches or exceeds
   this value, a Threshold Crossing Alert (TCA) should be sent."
::= { optIfOMSnSrcCurrentEntry 11 }

– OMSn source interval table – Contains data for previous 15-minute performance monitoring – intervals.

optIfOMSnSrcIntervalTable OBJECT-TYPE

SYNTAX  SEQUENCE OF OptIfOMSnSrcIntervalEntry
MAX-ACCESS  not-accessible
STATUS  current
DESCRIPTION
  "A table of historical OMSn source performance monitoring
   information."
::= { optIfOMSn 7 }

optIfOMSnSrcIntervalEntry OBJECT-TYPE

SYNTAX  OptIfOMSnSrcIntervalEntry
MAX-ACCESS  not-accessible
STATUS  current
DESCRIPTION
  "A conceptual row that contains OMSn source performance
   monitoring information of an interface during a particular
   historical interval."
INDEX  { ifIndex, optIfOMSnSrcIntervalNumber }
::= { optIfOMSnSrcIntervalTable 1 }

OptIfOMSnSrcIntervalEntry ::=

Lam, et al. Standards Track [Page 74] RFC 3591 Optical Interface Type MIB September 2003

SEQUENCE {
  optIfOMSnSrcIntervalNumber                    OptIfIntervalNumber,
  optIfOMSnSrcIntervalSuspectedFlag             TruthValue,
  optIfOMSnSrcIntervalLastOutputPower           Integer32,
  optIfOMSnSrcIntervalLowOutputPower            Integer32,
  optIfOMSnSrcIntervalHighOutputPower           Integer32,
  optIfOMSnSrcIntervalLastAggregatedInputPower  Integer32,
  optIfOMSnSrcIntervalLowAggregatedInputPower   Integer32,
  optIfOMSnSrcIntervalHighAggregatedInputPower  Integer32
  }

optIfOMSnSrcIntervalNumber OBJECT-TYPE

SYNTAX  OptIfIntervalNumber
MAX-ACCESS  not-accessible
STATUS  current
DESCRIPTION
  "Uniquely identifies the interval."
::= { optIfOMSnSrcIntervalEntry 1 }

optIfOMSnSrcIntervalSuspectedFlag OBJECT-TYPE

SYNTAX  TruthValue
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "If true, the data in this entry may be unreliable."
::= { optIfOMSnSrcIntervalEntry 2 }

optIfOMSnSrcIntervalLastOutputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The last optical power monitored at the output during the
   interval."
::= { optIfOMSnSrcIntervalEntry 3 }

optIfOMSnSrcIntervalLowOutputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The lowest optical power monitored at the output during the
   interval."
::= { optIfOMSnSrcIntervalEntry 4 }

optIfOMSnSrcIntervalHighOutputPower OBJECT-TYPE

Lam, et al. Standards Track [Page 75] RFC 3591 Optical Interface Type MIB September 2003

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The highest optical power monitored at the output during the
   interval."
::= { optIfOMSnSrcIntervalEntry 5 }

optIfOMSnSrcIntervalLastAggregatedInputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The last aggregated optical power at the input
   during the interval."
::= { optIfOMSnSrcIntervalEntry 6 }

optIfOMSnSrcIntervalLowAggregatedInputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The lowest aggregated optical power at the input
   during the interval."
::= { optIfOMSnSrcIntervalEntry 7 }

optIfOMSnSrcIntervalHighAggregatedInputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The highest aggregated optical power at the input
   during the interval."
::= { optIfOMSnSrcIntervalEntry 8 }

– OMSn source current day table – Contains data for the current 24-hour performance – monitoring interval.

optIfOMSnSrcCurDayTable OBJECT-TYPE

SYNTAX  SEQUENCE OF OptIfOMSnSrcCurDayEntry
MAX-ACCESS  not-accessible
STATUS  current
DESCRIPTION

Lam, et al. Standards Track [Page 76] RFC 3591 Optical Interface Type MIB September 2003

  "A table of OMSn source performance monitoring information for
   the current 24-hour interval."
::= { optIfOMSn 8 }

optIfOMSnSrcCurDayEntry OBJECT-TYPE

SYNTAX  OptIfOMSnSrcCurDayEntry
MAX-ACCESS  not-accessible
STATUS  current
DESCRIPTION
  "A conceptual row that contains OMSn source performance
   monitoring information of an interface for the current
   24-hour interval."
INDEX  { ifIndex }
::= { optIfOMSnSrcCurDayTable 1 }

OptIfOMSnSrcCurDayEntry ::=

SEQUENCE {
  optIfOMSnSrcCurDaySuspectedFlag             TruthValue,
  optIfOMSnSrcCurDayLowOutputPower            Integer32,
  optIfOMSnSrcCurDayHighOutputPower           Integer32,
  optIfOMSnSrcCurDayLowAggregatedInputPower   Integer32,
  optIfOMSnSrcCurDayHighAggregatedInputPower  Integer32
  }

optIfOMSnSrcCurDaySuspectedFlag OBJECT-TYPE

SYNTAX  TruthValue
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "If true, the data in this entry may be unreliable."
::= { optIfOMSnSrcCurDayEntry 1 }

optIfOMSnSrcCurDayLowOutputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The lowest optical power monitored at the output during the
   current 24-hour interval."
::= { optIfOMSnSrcCurDayEntry 2 }

optIfOMSnSrcCurDayHighOutputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION

Lam, et al. Standards Track [Page 77] RFC 3591 Optical Interface Type MIB September 2003

  "The highest optical power monitored at the output during the
   current 24-hour interval."
::= { optIfOMSnSrcCurDayEntry 3 }

optIfOMSnSrcCurDayLowAggregatedInputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The lowest aggregated optical power at the input
   during the current 24-hour interval."
::= { optIfOMSnSrcCurDayEntry 4 }

optIfOMSnSrcCurDayHighAggregatedInputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The highest aggregated optical power at the input
   during the current 24-hour interval."
::= { optIfOMSnSrcCurDayEntry 5 }

– OMSn source previous day table – Contains data for the previous 24-hour performance – monitoring interval.

optIfOMSnSrcPrevDayTable OBJECT-TYPE

SYNTAX  SEQUENCE OF OptIfOMSnSrcPrevDayEntry
MAX-ACCESS  not-accessible
STATUS  current
DESCRIPTION
  "A table of OMSn source performance monitoring information for
   the previous 24-hour interval."
::= { optIfOMSn 9 }

optIfOMSnSrcPrevDayEntry OBJECT-TYPE

SYNTAX  OptIfOMSnSrcPrevDayEntry
MAX-ACCESS  not-accessible
STATUS  current
DESCRIPTION
  "A conceptual row that contains OMSn source performance
   monitoring information of an interface for the previous
   24-hour interval."
INDEX  { ifIndex }
::= { optIfOMSnSrcPrevDayTable 1 }

Lam, et al. Standards Track [Page 78] RFC 3591 Optical Interface Type MIB September 2003

OptIfOMSnSrcPrevDayEntry ::=

SEQUENCE {
  optIfOMSnSrcPrevDaySuspectedFlag             TruthValue,
  optIfOMSnSrcPrevDayLastOutputPower           Integer32,
  optIfOMSnSrcPrevDayLowOutputPower            Integer32,
  optIfOMSnSrcPrevDayHighOutputPower           Integer32,
  optIfOMSnSrcPrevDayLastAggregatedInputPower  Integer32,
  optIfOMSnSrcPrevDayLowAggregatedInputPower   Integer32,
  optIfOMSnSrcPrevDayHighAggregatedInputPower  Integer32
  }

optIfOMSnSrcPrevDaySuspectedFlag OBJECT-TYPE

SYNTAX  TruthValue
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "If true, the data in this entry may be unreliable."
::= { optIfOMSnSrcPrevDayEntry 1 }

optIfOMSnSrcPrevDayLastOutputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The last optical power monitored at the output during the
   previous 24-hour interval."
::= { optIfOMSnSrcPrevDayEntry 2 }

optIfOMSnSrcPrevDayLowOutputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The lowest optical power monitored at the output during the
   previous 24-hour interval."
::= { optIfOMSnSrcPrevDayEntry 3 }

optIfOMSnSrcPrevDayHighOutputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The highest optical power monitored at the output during the
   previous 24-hour interval."
::= { optIfOMSnSrcPrevDayEntry 4 }

Lam, et al. Standards Track [Page 79] RFC 3591 Optical Interface Type MIB September 2003

optIfOMSnSrcPrevDayLastAggregatedInputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The last aggregated optical power at the input during the
   previous 24-hour interval."
::= { optIfOMSnSrcPrevDayEntry 5 }

optIfOMSnSrcPrevDayLowAggregatedInputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The lowest aggregated optical power at the input during the
   previous 24-hour interval."
::= { optIfOMSnSrcPrevDayEntry 6 }

optIfOMSnSrcPrevDayHighAggregatedInputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The highest aggregated optical power at the input during the
   previous 24-hour interval."
::= { optIfOMSnSrcPrevDayEntry 7 }

– the optIfOChGroup group – This group handles the configuration and performance monitoring – information for OChGroup layers.

– OChGroup config table

optIfOChGroupConfigTable OBJECT-TYPE

SYNTAX  SEQUENCE OF OptIfOChGroupConfigEntry
MAX-ACCESS  not-accessible
STATUS  current
DESCRIPTION
  "A table of OChGroup configuration information."
::= { optIfOChGroup 1 }

optIfOChGroupConfigEntry OBJECT-TYPE

SYNTAX  OptIfOChGroupConfigEntry
MAX-ACCESS  not-accessible
STATUS  current

Lam, et al. Standards Track [Page 80] RFC 3591 Optical Interface Type MIB September 2003

DESCRIPTION
  "A conceptual row that contains OChGroup configuration
   information of an interface."
INDEX  { ifIndex }
::= { optIfOChGroupConfigTable 1 }

OptIfOChGroupConfigEntry ::=

SEQUENCE {
  optIfOChGroupDirectionality OptIfDirectionality
  }

optIfOChGroupDirectionality OBJECT-TYPE

SYNTAX  OptIfDirectionality
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "Indicates the directionality of the entity."
::= { optIfOChGroupConfigEntry 1 }

– OChGroup sink current table – Contains data for the current 15-minute performance monitoring – interval.

optIfOChGroupSinkCurrentTable OBJECT-TYPE

SYNTAX  SEQUENCE OF OptIfOChGroupSinkCurrentEntry
MAX-ACCESS  not-accessible
STATUS  current
DESCRIPTION
  "A table of OChGroup sink performance monitoring information for
   the current 15-minute interval."
::= { optIfOChGroup 2 }

optIfOChGroupSinkCurrentEntry OBJECT-TYPE

SYNTAX  OptIfOChGroupSinkCurrentEntry
MAX-ACCESS  not-accessible
STATUS  current
DESCRIPTION
  "A conceptual row that contains OChGroup sink performance
   monitoring information of an interface for the current
   15-minute interval."
INDEX  { ifIndex }
::= { optIfOChGroupSinkCurrentTable 1 }

OptIfOChGroupSinkCurrentEntry ::=

SEQUENCE {
  optIfOChGroupSinkCurrentSuspectedFlag              TruthValue,
  optIfOChGroupSinkCurrentAggregatedInputPower       Integer32,
  optIfOChGroupSinkCurrentLowAggregatedInputPower    Integer32,

Lam, et al. Standards Track [Page 81] RFC 3591 Optical Interface Type MIB September 2003

  optIfOChGroupSinkCurrentHighAggregatedInputPower   Integer32,
  optIfOChGroupSinkCurrentLowerInputPowerThreshold   Integer32,
  optIfOChGroupSinkCurrentUpperInputPowerThreshold   Integer32,
  optIfOChGroupSinkCurrentOutputPower                Integer32,
  optIfOChGroupSinkCurrentLowOutputPower             Integer32,
  optIfOChGroupSinkCurrentHighOutputPower            Integer32,
  optIfOChGroupSinkCurrentLowerOutputPowerThreshold  Integer32,
  optIfOChGroupSinkCurrentUpperOutputPowerThreshold  Integer32
  }

optIfOChGroupSinkCurrentSuspectedFlag OBJECT-TYPE

SYNTAX  TruthValue
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "If true, the data in this entry may be unreliable."
::= { optIfOChGroupSinkCurrentEntry 1 }

optIfOChGroupSinkCurrentAggregatedInputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The aggregated optical power of all the DWDM input
   channels in the OChGroup."
::= { optIfOChGroupSinkCurrentEntry 2 }

optIfOChGroupSinkCurrentLowAggregatedInputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The lowest aggregated optical power of all the DWDM input
   channels in the OChGroup during the current 15-minute interval."
::= { optIfOChGroupSinkCurrentEntry 3 }

optIfOChGroupSinkCurrentHighAggregatedInputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The highest aggregated optical power of all the DWDM input
   channels in the OChGroup during the current 15-minute interval."
::= { optIfOChGroupSinkCurrentEntry 4 }

Lam, et al. Standards Track [Page 82] RFC 3591 Optical Interface Type MIB September 2003

optIfOChGroupSinkCurrentLowerInputPowerThreshold OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-write
STATUS  current
DESCRIPTION
  "The lower limit threshold on aggregated input power.  If
   optIfOChGroupSinkCurrentAggregatedInputPower drops to this value
   or below, a Threshold Crossing Alert (TCA) should be sent."
::= { optIfOChGroupSinkCurrentEntry 5 }

optIfOChGroupSinkCurrentUpperInputPowerThreshold OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-write
STATUS  current
DESCRIPTION
  "The upper limit threshold on aggregated input power.  If
   optIfOChGroupSinkCurrentAggregatedInputPower reaches or exceeds
   this value, a Threshold Crossing Alert (TCA) should be sent."
::= { optIfOChGroupSinkCurrentEntry 6 }

optIfOChGroupSinkCurrentOutputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The optical power monitored at the output
   in the OChGroup."
::= { optIfOChGroupSinkCurrentEntry 7 }

optIfOChGroupSinkCurrentLowOutputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The lowest optical power monitored at the output
   in the OChGroup during the current 15-minute interval."
::= { optIfOChGroupSinkCurrentEntry 8 }

optIfOChGroupSinkCurrentHighOutputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION

Lam, et al. Standards Track [Page 83] RFC 3591 Optical Interface Type MIB September 2003

  "The highest optical power monitored at the output
   in the OChGroup during the current 15-minute interval."
::= { optIfOChGroupSinkCurrentEntry 9 }

optIfOChGroupSinkCurrentLowerOutputPowerThreshold OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-write
STATUS  current
DESCRIPTION
  "The lower limit threshold on the output power.  If
   optIfOChGroupSinkCurrentOutputPower drops to this value
   or below, a Threshold Crossing Alert (TCA) should be sent."
::= { optIfOChGroupSinkCurrentEntry 10 }

optIfOChGroupSinkCurrentUpperOutputPowerThreshold OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-write
STATUS  current
DESCRIPTION
  "The upper limit threshold on the output power.  If
   optIfOChGroupSinkCurrentOutputPower reaches or exceeds
   this value, a Threshold Crossing Alert (TCA) should be sent."
::= { optIfOChGroupSinkCurrentEntry 11 }

– OChGroup sink interval table – Contains data for previous 15-minute performance monitoring – intervals.

optIfOChGroupSinkIntervalTable OBJECT-TYPE

SYNTAX  SEQUENCE OF OptIfOChGroupSinkIntervalEntry
MAX-ACCESS  not-accessible
STATUS  current
DESCRIPTION
  "A table of historical OChGroup sink performance monitoring
   information."
::= { optIfOChGroup 3 }

optIfOChGroupSinkIntervalEntry OBJECT-TYPE

SYNTAX  OptIfOChGroupSinkIntervalEntry
MAX-ACCESS  not-accessible
STATUS  current
DESCRIPTION
  "A conceptual row that contains OChGroup sink performance
   monitoring information of an interface during a particular
   historical interval."
INDEX  { ifIndex, optIfOChGroupSinkIntervalNumber }

Lam, et al. Standards Track [Page 84] RFC 3591 Optical Interface Type MIB September 2003

::= { optIfOChGroupSinkIntervalTable 1 }

OptIfOChGroupSinkIntervalEntry ::=

SEQUENCE {
 optIfOChGroupSinkIntervalNumber                  OptIfIntervalNumber,
 optIfOChGroupSinkIntervalSuspectedFlag            TruthValue,
 optIfOChGroupSinkIntervalLastAggregatedInputPower Integer32,
 optIfOChGroupSinkIntervalLowAggregatedInputPower  Integer32,
 optIfOChGroupSinkIntervalHighAggregatedInputPower Integer32,
 optIfOChGroupSinkIntervalLastOutputPower          Integer32,
 optIfOChGroupSinkIntervalLowOutputPower           Integer32,
 optIfOChGroupSinkIntervalHighOutputPower          Integer32
 }

optIfOChGroupSinkIntervalNumber OBJECT-TYPE

SYNTAX  OptIfIntervalNumber
MAX-ACCESS  not-accessible
STATUS  current
DESCRIPTION
  "Uniquely identifies the interval."
::= { optIfOChGroupSinkIntervalEntry 1 }

optIfOChGroupSinkIntervalSuspectedFlag OBJECT-TYPE

SYNTAX  TruthValue
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "If true, the data in this entry may be unreliable."
::= { optIfOChGroupSinkIntervalEntry 2 }

optIfOChGroupSinkIntervalLastAggregatedInputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The last aggregated optical power of all the DWDM input
   channels in the OChGroup during the interval."
::= { optIfOChGroupSinkIntervalEntry 3 }

optIfOChGroupSinkIntervalLowAggregatedInputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The lowest aggregated optical power of all the DWDM input
   channels in the OChGroup during the interval."

Lam, et al. Standards Track [Page 85] RFC 3591 Optical Interface Type MIB September 2003

::= { optIfOChGroupSinkIntervalEntry 4 }

optIfOChGroupSinkIntervalHighAggregatedInputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The highest aggregated optical power of all the DWDM input
   channels in the OChGroup during the interval."
::= { optIfOChGroupSinkIntervalEntry 5 }

optIfOChGroupSinkIntervalLastOutputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The last optical power monitored at the output
   in the OChGroup during the interval."
::= { optIfOChGroupSinkIntervalEntry 6 }

optIfOChGroupSinkIntervalLowOutputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The lowest optical power monitored at the output
   in the OChGroup during the interval."
::= { optIfOChGroupSinkIntervalEntry 7 }

optIfOChGroupSinkIntervalHighOutputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The highest optical power monitored at the output
   in the OChGroup during the interval."
::= { optIfOChGroupSinkIntervalEntry 8 }

– OChGroup sink current day table – Contains data for the current 24-hour performance – monitoring interval.

optIfOChGroupSinkCurDayTable OBJECT-TYPE

SYNTAX  SEQUENCE OF OptIfOChGroupSinkCurDayEntry

Lam, et al. Standards Track [Page 86] RFC 3591 Optical Interface Type MIB September 2003

MAX-ACCESS  not-accessible
STATUS  current
DESCRIPTION
  "A table of OChGroup sink performance monitoring information for
   the current 24-hour interval."
::= { optIfOChGroup 4 }

optIfOChGroupSinkCurDayEntry OBJECT-TYPE

SYNTAX  OptIfOChGroupSinkCurDayEntry
MAX-ACCESS  not-accessible
STATUS  current
DESCRIPTION
  "A conceptual row that contains OChGroup sink performance
   monitoring information of an interface for the current
   24-hour interval."
INDEX  { ifIndex }
::= { optIfOChGroupSinkCurDayTable 1 }

OptIfOChGroupSinkCurDayEntry ::=

SEQUENCE {
  optIfOChGroupSinkCurDaySuspectedFlag             TruthValue,
  optIfOChGroupSinkCurDayLowAggregatedInputPower   Integer32,
  optIfOChGroupSinkCurDayHighAggregatedInputPower  Integer32,
  optIfOChGroupSinkCurDayLowOutputPower            Integer32,
  optIfOChGroupSinkCurDayHighOutputPower           Integer32
  }

optIfOChGroupSinkCurDaySuspectedFlag OBJECT-TYPE

SYNTAX  TruthValue
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "If true, the data in this entry may be unreliable."
::= { optIfOChGroupSinkCurDayEntry 1 }

optIfOChGroupSinkCurDayLowAggregatedInputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The lowest aggregated optical power of all the DWDM input
   channels in the OChGroup during the current 24-hour interval."
::= { optIfOChGroupSinkCurDayEntry 2 }

optIfOChGroupSinkCurDayHighAggregatedInputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"

Lam, et al. Standards Track [Page 87] RFC 3591 Optical Interface Type MIB September 2003

MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The highest aggregated optical power of all the DWDM input
   channels in the OChGroup during the current 24-hour interval."
::= { optIfOChGroupSinkCurDayEntry 3 }

optIfOChGroupSinkCurDayLowOutputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The lowest optical power monitored at the output
   in the OChGroup during the current 24-hour interval."
::= { optIfOChGroupSinkCurDayEntry 4 }

optIfOChGroupSinkCurDayHighOutputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The highest optical power monitored at the output
   in the OChGroup during the current 24-hour interval."
::= { optIfOChGroupSinkCurDayEntry 5 }

– OChGroup sink previous day table – Contains data for the previous 24-hour performance – monitoring interval.

optIfOChGroupSinkPrevDayTable OBJECT-TYPE

SYNTAX  SEQUENCE OF OptIfOChGroupSinkPrevDayEntry
MAX-ACCESS  not-accessible
STATUS  current
DESCRIPTION
  "A table of OChGroup sink performance monitoring information for
   the previous 24-hour interval."
::= { optIfOChGroup 5 }

optIfOChGroupSinkPrevDayEntry OBJECT-TYPE

SYNTAX  OptIfOChGroupSinkPrevDayEntry
MAX-ACCESS  not-accessible
STATUS  current
DESCRIPTION
  "A conceptual row that contains OChGroup sink performance
   monitoring information of an interface for the previous
   24-hour interval."

Lam, et al. Standards Track [Page 88] RFC 3591 Optical Interface Type MIB September 2003

INDEX  { ifIndex }
::= { optIfOChGroupSinkPrevDayTable 1 }

OptIfOChGroupSinkPrevDayEntry ::=

SEQUENCE {
  optIfOChGroupSinkPrevDaySuspectedFlag             TruthValue,
  optIfOChGroupSinkPrevDayLastAggregatedInputPower  Integer32,
  optIfOChGroupSinkPrevDayLowAggregatedInputPower   Integer32,
  optIfOChGroupSinkPrevDayHighAggregatedInputPower  Integer32,
  optIfOChGroupSinkPrevDayLastOutputPower           Integer32,
  optIfOChGroupSinkPrevDayLowOutputPower            Integer32,
  optIfOChGroupSinkPrevDayHighOutputPower           Integer32
  }

optIfOChGroupSinkPrevDaySuspectedFlag OBJECT-TYPE

SYNTAX  TruthValue
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "If true, the data in this entry may be unreliable."
::= { optIfOChGroupSinkPrevDayEntry 1 }

optIfOChGroupSinkPrevDayLastAggregatedInputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The last aggregated optical power of all the DWDM input
   channels in the OChGroup during the previous 24-hour interval."
::= { optIfOChGroupSinkPrevDayEntry 2 }

optIfOChGroupSinkPrevDayLowAggregatedInputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The lowest aggregated optical power of all the DWDM input
   channels in the OChGroup during the previous 24-hour interval."
::= { optIfOChGroupSinkPrevDayEntry 3 }

optIfOChGroupSinkPrevDayHighAggregatedInputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION

Lam, et al. Standards Track [Page 89] RFC 3591 Optical Interface Type MIB September 2003

  "The highest aggregated optical power of all the DWDM input
   channels in the OChGroup during the previous 24-hour interval."
::= { optIfOChGroupSinkPrevDayEntry 4 }

optIfOChGroupSinkPrevDayLastOutputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The last optical power monitored at the output
   in the OChGroup during the previous 24-hour interval."
::= { optIfOChGroupSinkPrevDayEntry 5 }

optIfOChGroupSinkPrevDayLowOutputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The lowest optical power monitored at the output
   in the OChGroup during the previous 24-hour interval."
::= { optIfOChGroupSinkPrevDayEntry 6 }

optIfOChGroupSinkPrevDayHighOutputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The highest optical power monitored at the output
   in the OChGroup during the previous 24-hour interval."
::= { optIfOChGroupSinkPrevDayEntry 7 }

– OChGroup source current table – Contains data for the current 15-minute performance monitoring – interval.

optIfOChGroupSrcCurrentTable OBJECT-TYPE

SYNTAX  SEQUENCE OF OptIfOChGroupSrcCurrentEntry
MAX-ACCESS  not-accessible
STATUS  current
DESCRIPTION
  "A table of OChGroup source performance monitoring information for
   the current 15-minute interval."
::= { optIfOChGroup 6 }

optIfOChGroupSrcCurrentEntry OBJECT-TYPE

Lam, et al. Standards Track [Page 90] RFC 3591 Optical Interface Type MIB September 2003

SYNTAX  OptIfOChGroupSrcCurrentEntry
MAX-ACCESS  not-accessible
STATUS  current
DESCRIPTION
  "A conceptual row that contains OChGroup source performance
   monitoring information of an interface for the current
   15-minute interval."
INDEX  { ifIndex }
::= { optIfOChGroupSrcCurrentTable 1 }

OptIfOChGroupSrcCurrentEntry ::=

SEQUENCE {
  optIfOChGroupSrcCurrentSuspectedFlag              TruthValue,
  optIfOChGroupSrcCurrentOutputPower                Integer32,
  optIfOChGroupSrcCurrentLowOutputPower             Integer32,
  optIfOChGroupSrcCurrentHighOutputPower            Integer32,
  optIfOChGroupSrcCurrentLowerOutputPowerThreshold  Integer32,
  optIfOChGroupSrcCurrentUpperOutputPowerThreshold  Integer32,
  optIfOChGroupSrcCurrentAggregatedInputPower       Integer32,
  optIfOChGroupSrcCurrentLowAggregatedInputPower    Integer32,
  optIfOChGroupSrcCurrentHighAggregatedInputPower   Integer32,
  optIfOChGroupSrcCurrentLowerInputPowerThreshold   Integer32,
  optIfOChGroupSrcCurrentUpperInputPowerThreshold   Integer32
  }

optIfOChGroupSrcCurrentSuspectedFlag OBJECT-TYPE

SYNTAX  TruthValue
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "If true, the data in this entry may be unreliable."
::= { optIfOChGroupSrcCurrentEntry 1 }

optIfOChGroupSrcCurrentOutputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The optical power monitored at the output."
::= { optIfOChGroupSrcCurrentEntry 2 }

optIfOChGroupSrcCurrentLowOutputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION

Lam, et al. Standards Track [Page 91] RFC 3591 Optical Interface Type MIB September 2003

  "The lowest optical power monitored at the output during the
   current 15-minute interval."
::= { optIfOChGroupSrcCurrentEntry 3 }

optIfOChGroupSrcCurrentHighOutputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The highest optical power monitored at the output during the
   current 15-minute interval."
::= { optIfOChGroupSrcCurrentEntry 4 }

optIfOChGroupSrcCurrentLowerOutputPowerThreshold OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-write
STATUS  current
DESCRIPTION
  "The lower limit threshold on output power.  If
   optIfOChGroupSrcCurrentOutputPower drops to this value or below,
   a Threshold Crossing Alert (TCA) should be sent."
::= { optIfOChGroupSrcCurrentEntry 5 }

optIfOChGroupSrcCurrentUpperOutputPowerThreshold OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-write
STATUS  current
DESCRIPTION
  "The upper limit threshold on output power.  If
   optIfOChGroupSrcCurrentOutputPower reaches or exceeds this value,
   a Threshold Crossing Alert (TCA) should be sent."
::= { optIfOChGroupSrcCurrentEntry 6 }

optIfOChGroupSrcCurrentAggregatedInputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The aggregated optical power monitored at the input."
::= { optIfOChGroupSrcCurrentEntry 7 }

optIfOChGroupSrcCurrentLowAggregatedInputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"

Lam, et al. Standards Track [Page 92] RFC 3591 Optical Interface Type MIB September 2003

MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The lowest aggregated optical power monitored at the input
   during the current 15-minute interval."
::= { optIfOChGroupSrcCurrentEntry 8 }

optIfOChGroupSrcCurrentHighAggregatedInputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The highest aggregated optical power monitored at the input
   during the current 15-minute interval."
::= { optIfOChGroupSrcCurrentEntry 9 }

optIfOChGroupSrcCurrentLowerInputPowerThreshold OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-write
STATUS  current
DESCRIPTION
  "The lower limit threshold on input power.  If
   optIfOChGroupSrcCurrentAggregatedInputPower drops to this value
   or below, a Threshold Crossing Alert (TCA) should be sent."
::= { optIfOChGroupSrcCurrentEntry 10 }

optIfOChGroupSrcCurrentUpperInputPowerThreshold OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-write
STATUS  current
DESCRIPTION
  "The upper limit threshold on input power.  If
   optIfOChGroupSrcCurrentAggregatedInputPower reaches or exceeds
   this value, a Threshold Crossing Alert (TCA) should be sent."
::= { optIfOChGroupSrcCurrentEntry 11 }

– OChGroup source interval table – Contains data for previous 15-minute performance monitoring – intervals.

optIfOChGroupSrcIntervalTable OBJECT-TYPE

SYNTAX  SEQUENCE OF OptIfOChGroupSrcIntervalEntry
MAX-ACCESS  not-accessible
STATUS  current
DESCRIPTION

Lam, et al. Standards Track [Page 93] RFC 3591 Optical Interface Type MIB September 2003

  "A table of historical OChGroup source performance monitoring
   information."
::= { optIfOChGroup 7 }

optIfOChGroupSrcIntervalEntry OBJECT-TYPE

SYNTAX  OptIfOChGroupSrcIntervalEntry
MAX-ACCESS  not-accessible
STATUS  current
DESCRIPTION
  "A conceptual row that contains OChGroup source performance
   monitoring information of an interface during a particular
   historical interval."
INDEX  { ifIndex, optIfOChGroupSrcIntervalNumber }
::= { optIfOChGroupSrcIntervalTable 1 }

OptIfOChGroupSrcIntervalEntry ::=

SEQUENCE {
 optIfOChGroupSrcIntervalNumber                   OptIfIntervalNumber,
 optIfOChGroupSrcIntervalSuspectedFlag             TruthValue,
 optIfOChGroupSrcIntervalLastOutputPower           Integer32,
 optIfOChGroupSrcIntervalLowOutputPower            Integer32,
 optIfOChGroupSrcIntervalHighOutputPower           Integer32,
 optIfOChGroupSrcIntervalLastAggregatedInputPower  Integer32,
 optIfOChGroupSrcIntervalLowAggregatedInputPower   Integer32,
 optIfOChGroupSrcIntervalHighAggregatedInputPower  Integer32
 }

optIfOChGroupSrcIntervalNumber OBJECT-TYPE

SYNTAX  OptIfIntervalNumber
MAX-ACCESS  not-accessible
STATUS  current
DESCRIPTION
  "Uniquely identifies the interval."
::= { optIfOChGroupSrcIntervalEntry 1 }

optIfOChGroupSrcIntervalSuspectedFlag OBJECT-TYPE

SYNTAX  TruthValue
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "If true, the data in this entry may be unreliable."
::= { optIfOChGroupSrcIntervalEntry 2 }

optIfOChGroupSrcIntervalLastOutputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current

Lam, et al. Standards Track [Page 94] RFC 3591 Optical Interface Type MIB September 2003

DESCRIPTION
  "The last optical power monitored at the output during the
   interval."
::= { optIfOChGroupSrcIntervalEntry 3 }

optIfOChGroupSrcIntervalLowOutputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The lowest optical power monitored at the output during the
   interval."
::= { optIfOChGroupSrcIntervalEntry 4 }

optIfOChGroupSrcIntervalHighOutputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The highest optical power monitored at the output during the
   interval."
::= { optIfOChGroupSrcIntervalEntry 5 }

optIfOChGroupSrcIntervalLastAggregatedInputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The last aggregated optical power monitored at the input
   during the interval."
::= { optIfOChGroupSrcIntervalEntry 6 }

optIfOChGroupSrcIntervalLowAggregatedInputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The lowest aggregated optical power monitored at the input
   during the interval."
::= { optIfOChGroupSrcIntervalEntry 7 }

optIfOChGroupSrcIntervalHighAggregatedInputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"

Lam, et al. Standards Track [Page 95] RFC 3591 Optical Interface Type MIB September 2003

MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The highest aggregated optical power monitored at the input
   during the interval."
::= { optIfOChGroupSrcIntervalEntry 8 }

– OChGroup source current day table – Contains data for the current 24-hour performance – monitoring interval.

optIfOChGroupSrcCurDayTable OBJECT-TYPE

SYNTAX  SEQUENCE OF OptIfOChGroupSrcCurDayEntry
MAX-ACCESS  not-accessible
STATUS  current
DESCRIPTION
  "A table of OChGroup source performance monitoring information for
   the current 24-hour interval."
::= { optIfOChGroup 8 }

optIfOChGroupSrcCurDayEntry OBJECT-TYPE

SYNTAX  OptIfOChGroupSrcCurDayEntry
MAX-ACCESS  not-accessible
STATUS  current
DESCRIPTION
  "A conceptual row that contains OChGroup source performance
   monitoring information of an interface for the current
   24-hour interval."
INDEX  { ifIndex }
::= { optIfOChGroupSrcCurDayTable 1 }

OptIfOChGroupSrcCurDayEntry ::=

SEQUENCE {
  optIfOChGroupSrcCurDaySuspectedFlag             TruthValue,
  optIfOChGroupSrcCurDayLowOutputPower            Integer32,
  optIfOChGroupSrcCurDayHighOutputPower           Integer32,
  optIfOChGroupSrcCurDayLowAggregatedInputPower   Integer32,
  optIfOChGroupSrcCurDayHighAggregatedInputPower  Integer32
  }

optIfOChGroupSrcCurDaySuspectedFlag OBJECT-TYPE

SYNTAX  TruthValue
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "If true, the data in this entry may be unreliable."
::= { optIfOChGroupSrcCurDayEntry 1 }

Lam, et al. Standards Track [Page 96] RFC 3591 Optical Interface Type MIB September 2003

optIfOChGroupSrcCurDayLowOutputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The lowest optical power monitored at the output during the
   current 24-hour interval."
::= { optIfOChGroupSrcCurDayEntry 2 }

optIfOChGroupSrcCurDayHighOutputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The highest optical power monitored at the output during the
   current 24-hour interval."
::= { optIfOChGroupSrcCurDayEntry 3 }

optIfOChGroupSrcCurDayLowAggregatedInputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The lowest aggregated optical power monitored at the input
   during the current 24-hour interval."
::= { optIfOChGroupSrcCurDayEntry 4 }

optIfOChGroupSrcCurDayHighAggregatedInputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The highest aggregated optical power monitored at the input
   during the current 24-hour interval."
::= { optIfOChGroupSrcCurDayEntry 5 }

– OChGroup source previous day table – Contains data for the previous 24-hour performance – monitoring interval.

optIfOChGroupSrcPrevDayTable OBJECT-TYPE

SYNTAX  SEQUENCE OF OptIfOChGroupSrcPrevDayEntry
MAX-ACCESS  not-accessible
STATUS  current

Lam, et al. Standards Track [Page 97] RFC 3591 Optical Interface Type MIB September 2003

DESCRIPTION
  "A table of OChGroup source performance monitoring information for
   the previous 24-hour interval."
::= { optIfOChGroup 9 }

optIfOChGroupSrcPrevDayEntry OBJECT-TYPE

SYNTAX  OptIfOChGroupSrcPrevDayEntry
MAX-ACCESS  not-accessible
STATUS  current
DESCRIPTION
  "A conceptual row that contains OChGroup source performance
   monitoring information of an interface for the previous
   24-hour interval."
INDEX  { ifIndex }
::= { optIfOChGroupSrcPrevDayTable 1 }

OptIfOChGroupSrcPrevDayEntry ::=

SEQUENCE {
  optIfOChGroupSrcPrevDaySuspectedFlag             TruthValue,
  optIfOChGroupSrcPrevDayLastOutputPower           Integer32,
  optIfOChGroupSrcPrevDayLowOutputPower            Integer32,
  optIfOChGroupSrcPrevDayHighOutputPower           Integer32,
  optIfOChGroupSrcPrevDayLastAggregatedInputPower  Integer32,
  optIfOChGroupSrcPrevDayLowAggregatedInputPower   Integer32,
  optIfOChGroupSrcPrevDayHighAggregatedInputPower  Integer32
  }

optIfOChGroupSrcPrevDaySuspectedFlag OBJECT-TYPE

SYNTAX  TruthValue
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "If true, the data in this entry may be unreliable."
::= { optIfOChGroupSrcPrevDayEntry 1 }

optIfOChGroupSrcPrevDayLastOutputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The last optical power monitored at the output during the
   previous 24-hour interval."
::= { optIfOChGroupSrcPrevDayEntry 2 }

optIfOChGroupSrcPrevDayLowOutputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"

Lam, et al. Standards Track [Page 98] RFC 3591 Optical Interface Type MIB September 2003

MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The lowest optical power monitored at the output during the
   previous 24-hour interval."
::= { optIfOChGroupSrcPrevDayEntry 3 }

optIfOChGroupSrcPrevDayHighOutputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The highest optical power monitored at the output during the
   previous 24-hour interval."
::= { optIfOChGroupSrcPrevDayEntry 4 }

optIfOChGroupSrcPrevDayLastAggregatedInputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The last aggregated optical power monitored at the input
   during the previous 24-hour interval."
::= { optIfOChGroupSrcPrevDayEntry 5 }

optIfOChGroupSrcPrevDayLowAggregatedInputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The lowest aggregated optical power monitored at the input
   during the previous 24-hour interval."
::= { optIfOChGroupSrcPrevDayEntry 6 }

optIfOChGroupSrcPrevDayHighAggregatedInputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The highest aggregated optical power monitored at the input
   during the previous 24-hour interval."
::= { optIfOChGroupSrcPrevDayEntry 7 }

– the optIfOCh group

Lam, et al. Standards Track [Page 99] RFC 3591 Optical Interface Type MIB September 2003

– This group handles the configuration and – performance monitoring information for OCh layers.

– OCh config table

optIfOChConfigTable OBJECT-TYPE

SYNTAX  SEQUENCE OF OptIfOChConfigEntry
MAX-ACCESS  not-accessible
STATUS  current
DESCRIPTION
  "A table of OCh configuration information."
::= { optIfOCh 1 }

optIfOChConfigEntry OBJECT-TYPE

SYNTAX  OptIfOChConfigEntry
MAX-ACCESS  not-accessible
STATUS  current
DESCRIPTION
  "A conceptual row that contains OCh configuration
   information of an interface."
INDEX  { ifIndex }
::= { optIfOChConfigTable 1 }

OptIfOChConfigEntry ::=

SEQUENCE {
  optIfOChDirectionality     OptIfDirectionality,
  optIfOChCurrentStatus      BITS
  }

optIfOChDirectionality OBJECT-TYPE

SYNTAX  OptIfDirectionality
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "Indicates the directionality of the entity."
::= { optIfOChConfigEntry 1 }

optIfOChCurrentStatus OBJECT-TYPE

SYNTAX  BITS {
  losP(0),
  los(1),
  oci(2),
  ssfP(3),
  ssfO(4),
  ssf(5)
  }
MAX-ACCESS  read-only
STATUS  current

Lam, et al. Standards Track [Page 100] RFC 3591 Optical Interface Type MIB September 2003

DESCRIPTION
  "Indicates the defect condition of the entity, if any.
   This object is applicable when optIfOChDirectionality
   has the value sink(1) or bidirectional(3).
   In full-capability systems the bit position los(1) is not used.
   In reduced-capability systems or at IrDI interfaces only
   the bit positions los(1) and ssfP(3) are used."
::= { optIfOChConfigEntry 2 }

– OCh sink current table – Contains data for the current 15-minute performance monitoring – interval.

optIfOChSinkCurrentTable OBJECT-TYPE

SYNTAX  SEQUENCE OF OptIfOChSinkCurrentEntry
MAX-ACCESS  not-accessible
STATUS  current
DESCRIPTION
  "A table of OCh sink performance monitoring information for
   the current 15-minute interval."
::= { optIfOCh 2 }

optIfOChSinkCurrentEntry OBJECT-TYPE

SYNTAX  OptIfOChSinkCurrentEntry
MAX-ACCESS  not-accessible
STATUS  current
DESCRIPTION
  "A conceptual row that contains OCh sink performance
   monitoring information for an interface for the current
   15-minute interval."
INDEX  { ifIndex }
::= { optIfOChSinkCurrentTable 1 }

OptIfOChSinkCurrentEntry ::=

SEQUENCE {
  optIfOChSinkCurrentSuspectedFlag             TruthValue,
  optIfOChSinkCurrentInputPower                Integer32,
  optIfOChSinkCurrentLowInputPower             Integer32,
  optIfOChSinkCurrentHighInputPower            Integer32,
  optIfOChSinkCurrentLowerInputPowerThreshold  Integer32,
  optIfOChSinkCurrentUpperInputPowerThreshold  Integer32
  }

optIfOChSinkCurrentSuspectedFlag OBJECT-TYPE

SYNTAX  TruthValue
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION

Lam, et al. Standards Track [Page 101] RFC 3591 Optical Interface Type MIB September 2003

  "If true, the data in this entry may be unreliable."
::= { optIfOChSinkCurrentEntry 1 }

optIfOChSinkCurrentInputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The optical power monitored at the input."
::= { optIfOChSinkCurrentEntry 2 }

optIfOChSinkCurrentLowInputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The lowest optical power monitored at the input during the
   current 15-minute interval."
::= { optIfOChSinkCurrentEntry 3 }

optIfOChSinkCurrentHighInputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The highest optical power monitored at the input during the
   current 15-minute interval."
::= { optIfOChSinkCurrentEntry 4 }

optIfOChSinkCurrentLowerInputPowerThreshold OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-write
STATUS  current
DESCRIPTION
  "The lower limit threshold on input power.  If
   optIfOChSinkCurrentInputPower drops to this value or below,
   a Threshold Crossing Alert (TCA) should be sent."
::= { optIfOChSinkCurrentEntry 5 }

optIfOChSinkCurrentUpperInputPowerThreshold OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-write
STATUS  current

Lam, et al. Standards Track [Page 102] RFC 3591 Optical Interface Type MIB September 2003

DESCRIPTION
  "The upper limit threshold on input power.  If
   optIfOChSinkCurrentInputPower reaches or exceeds this value,
   a Threshold Crossing Alert (TCA) should be sent."
::= { optIfOChSinkCurrentEntry 6 }

– OCh sink interval table – Contains data for previous 15-minute performance monitoring – intervals.

optIfOChSinkIntervalTable OBJECT-TYPE

SYNTAX  SEQUENCE OF OptIfOChSinkIntervalEntry
MAX-ACCESS  not-accessible
STATUS  current
DESCRIPTION
  "A table of historical OCh sink performance monitoring
   information."
::= { optIfOCh 3 }

optIfOChSinkIntervalEntry OBJECT-TYPE

SYNTAX  OptIfOChSinkIntervalEntry
MAX-ACCESS  not-accessible
STATUS  current
DESCRIPTION
  "A conceptual row that contains OCh sink performance
   monitoring information of an interface during a particular
   historical interval."
INDEX  { ifIndex, optIfOChSinkIntervalNumber }
::= { optIfOChSinkIntervalTable 1 }

OptIfOChSinkIntervalEntry ::=

SEQUENCE {
  optIfOChSinkIntervalNumber          OptIfIntervalNumber,
  optIfOChSinkIntervalSuspectedFlag   TruthValue,
  optIfOChSinkIntervalLastInputPower  Integer32,
  optIfOChSinkIntervalLowInputPower   Integer32,
  optIfOChSinkIntervalHighInputPower  Integer32
  }

optIfOChSinkIntervalNumber OBJECT-TYPE

SYNTAX  OptIfIntervalNumber
MAX-ACCESS  not-accessible
STATUS  current
DESCRIPTION
  "Uniquely identifies the interval."
::= { optIfOChSinkIntervalEntry 1 }

optIfOChSinkIntervalSuspectedFlag OBJECT-TYPE

Lam, et al. Standards Track [Page 103] RFC 3591 Optical Interface Type MIB September 2003

SYNTAX  TruthValue
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "If true, the data in this entry may be unreliable."
::= { optIfOChSinkIntervalEntry 2 }

optIfOChSinkIntervalLastInputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The last optical power monitored at the input during the
   interval."
::= { optIfOChSinkIntervalEntry 3 }

optIfOChSinkIntervalLowInputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The lowest optical power monitored at the input during the
   interval."
::= { optIfOChSinkIntervalEntry 4 }

optIfOChSinkIntervalHighInputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The highest optical power monitored at the input during the
   interval."
::= { optIfOChSinkIntervalEntry 5 }

– OCh sink current day table – Contains data for the current 24-hour performance – monitoring interval.

optIfOChSinkCurDayTable OBJECT-TYPE

SYNTAX  SEQUENCE OF OptIfOChSinkCurDayEntry
MAX-ACCESS  not-accessible
STATUS  current
DESCRIPTION
  "A table of OCh sink performance monitoring information for
   the current 24-hour interval."

Lam, et al. Standards Track [Page 104] RFC 3591 Optical Interface Type MIB September 2003

::= { optIfOCh 4 }

optIfOChSinkCurDayEntry OBJECT-TYPE

SYNTAX  OptIfOChSinkCurDayEntry
MAX-ACCESS  not-accessible
STATUS  current
DESCRIPTION
  "A conceptual row that contains OCh sink performance
   monitoring information of an interface for the current
   24-hour interval."
INDEX  { ifIndex }
::= { optIfOChSinkCurDayTable 1 }

OptIfOChSinkCurDayEntry ::=

SEQUENCE {
  optIfOChSinkCurDaySuspectedFlag   TruthValue,
  optIfOChSinkCurDayLowInputPower   Integer32,
  optIfOChSinkCurDayHighInputPower  Integer32
  }

optIfOChSinkCurDaySuspectedFlag OBJECT-TYPE

SYNTAX  TruthValue
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "If true, the data in this entry may be unreliable."
::= { optIfOChSinkCurDayEntry 1 }

optIfOChSinkCurDayLowInputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The lowest optical power monitored at the input during the
   current 24-hour interval."
::= { optIfOChSinkCurDayEntry 2 }

optIfOChSinkCurDayHighInputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The highest optical power monitored at the input during the
   current 24-hour interval."
::= { optIfOChSinkCurDayEntry 3 }

Lam, et al. Standards Track [Page 105] RFC 3591 Optical Interface Type MIB September 2003

– OCh sink previous day table – Contains data for the previous 24-hour performance – monitoring interval.

optIfOChSinkPrevDayTable OBJECT-TYPE

SYNTAX  SEQUENCE OF OptIfOChSinkPrevDayEntry
MAX-ACCESS  not-accessible
STATUS  current
DESCRIPTION
  "A table of OCh sink performance monitoring information for
   the previous 24-hour interval."
::= { optIfOCh 5 }

optIfOChSinkPrevDayEntry OBJECT-TYPE

SYNTAX  OptIfOChSinkPrevDayEntry
MAX-ACCESS  not-accessible
STATUS  current
DESCRIPTION
  "A conceptual row that contains OCh sink performance
   monitoring information of an interface for the previous
   24-hour interval."
INDEX  { ifIndex }
::= { optIfOChSinkPrevDayTable 1 }

OptIfOChSinkPrevDayEntry ::=

SEQUENCE {
  optIfOChSinkPrevDaySuspectedFlag   TruthValue,
  optIfOChSinkPrevDayLastInputPower  Integer32,
  optIfOChSinkPrevDayLowInputPower   Integer32,
  optIfOChSinkPrevDayHighInputPower  Integer32
  }

optIfOChSinkPrevDaySuspectedFlag OBJECT-TYPE

SYNTAX  TruthValue
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "If true, the data in this entry may be unreliable."
::= { optIfOChSinkPrevDayEntry 1 }

optIfOChSinkPrevDayLastInputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The last optical power monitored at the input during the
   previous 24-hour interval."

Lam, et al. Standards Track [Page 106] RFC 3591 Optical Interface Type MIB September 2003

::= { optIfOChSinkPrevDayEntry 2 }

optIfOChSinkPrevDayLowInputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The lowest optical power monitored at the input during the
   previous 24-hour interval."
::= { optIfOChSinkPrevDayEntry 3 }

optIfOChSinkPrevDayHighInputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The highest optical power monitored at the input during the
   previous 24-hour interval."
::= { optIfOChSinkPrevDayEntry 4 }

– OCh source current table – Contains data for the current 15-minute performance monitoring – interval.

optIfOChSrcCurrentTable OBJECT-TYPE

SYNTAX  SEQUENCE OF OptIfOChSrcCurrentEntry
MAX-ACCESS  not-accessible
STATUS  current
DESCRIPTION
  "A table of OCh source performance monitoring information for
   the current 15-minute interval."
::= { optIfOCh 6 }

optIfOChSrcCurrentEntry OBJECT-TYPE

SYNTAX  OptIfOChSrcCurrentEntry
MAX-ACCESS  not-accessible
STATUS  current
DESCRIPTION
  "A conceptual row that contains OCh source performance
   monitoring information of an interface for the current
   15-minute interval."
INDEX  { ifIndex }
::= { optIfOChSrcCurrentTable 1 }

OptIfOChSrcCurrentEntry ::=

SEQUENCE {

Lam, et al. Standards Track [Page 107] RFC 3591 Optical Interface Type MIB September 2003

  optIfOChSrcCurrentSuspectedFlag              TruthValue,
  optIfOChSrcCurrentOutputPower                Integer32,
  optIfOChSrcCurrentLowOutputPower             Integer32,
  optIfOChSrcCurrentHighOutputPower            Integer32,
  optIfOChSrcCurrentLowerOutputPowerThreshold  Integer32,
  optIfOChSrcCurrentUpperOutputPowerThreshold  Integer32
  }

optIfOChSrcCurrentSuspectedFlag OBJECT-TYPE

SYNTAX  TruthValue
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "If true, the data in this entry may be unreliable."
::= { optIfOChSrcCurrentEntry 1 }

optIfOChSrcCurrentOutputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The optical power monitored at the output."
::= { optIfOChSrcCurrentEntry 2 }

optIfOChSrcCurrentLowOutputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The lowest optical power monitored at the output during the
   current 15-minute interval."
::= { optIfOChSrcCurrentEntry 3 }

optIfOChSrcCurrentHighOutputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The highest optical power monitored at the output during the
   current 15-minute interval."
::= { optIfOChSrcCurrentEntry 4 }

optIfOChSrcCurrentLowerOutputPowerThreshold OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"

Lam, et al. Standards Track [Page 108] RFC 3591 Optical Interface Type MIB September 2003

MAX-ACCESS  read-write
STATUS  current
DESCRIPTION
  "The lower limit threshold on output power.  If
   optIfOChSrcCurrentOutputPower drops to this value or below,
   a Threshold Crossing Alert (TCA) should be sent."
::= { optIfOChSrcCurrentEntry 5 }

optIfOChSrcCurrentUpperOutputPowerThreshold OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-write
STATUS  current
DESCRIPTION
  "The upper limit threshold on output power.  If
   optIfOChSrcCurrentOutputPower reaches or exceeds this value,
   a Threshold Crossing Alert (TCA) should be sent."
::= { optIfOChSrcCurrentEntry 6 }

– OCh source interval table – Contains data for previous 15-minute performance monitoring – intervals.

optIfOChSrcIntervalTable OBJECT-TYPE

SYNTAX  SEQUENCE OF OptIfOChSrcIntervalEntry
MAX-ACCESS  not-accessible
STATUS  current
DESCRIPTION
  "A table of historical OCh source performance monitoring
   information."
::= { optIfOCh 7 }

optIfOChSrcIntervalEntry OBJECT-TYPE

SYNTAX  OptIfOChSrcIntervalEntry
MAX-ACCESS  not-accessible
STATUS  current
DESCRIPTION
  "A conceptual row that contains OCh source performance
   monitoring information of an interface during a particular
   historical interval."
INDEX  { ifIndex, optIfOChSrcIntervalNumber }
::= { optIfOChSrcIntervalTable 1 }

OptIfOChSrcIntervalEntry ::=

SEQUENCE {
  optIfOChSrcIntervalNumber           OptIfIntervalNumber,
  optIfOChSrcIntervalSuspectedFlag    TruthValue,
  optIfOChSrcIntervalLastOutputPower  Integer32,

Lam, et al. Standards Track [Page 109] RFC 3591 Optical Interface Type MIB September 2003

  optIfOChSrcIntervalLowOutputPower   Integer32,
  optIfOChSrcIntervalHighOutputPower  Integer32
  }

optIfOChSrcIntervalNumber OBJECT-TYPE

SYNTAX  OptIfIntervalNumber
MAX-ACCESS  not-accessible
STATUS  current
DESCRIPTION
  "Uniquely identifies the interval."
::= { optIfOChSrcIntervalEntry 1 }

optIfOChSrcIntervalSuspectedFlag OBJECT-TYPE

SYNTAX  TruthValue
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "If true, the data in this entry may be unreliable."
::= { optIfOChSrcIntervalEntry 2 }

optIfOChSrcIntervalLastOutputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The last optical power monitored at the output during the
   interval."
::= { optIfOChSrcIntervalEntry 3 }

optIfOChSrcIntervalLowOutputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The lowest optical power monitored at the output during the
   interval."
::= { optIfOChSrcIntervalEntry 4 }

optIfOChSrcIntervalHighOutputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The highest optical power monitored at the output during the
   interval."

Lam, et al. Standards Track [Page 110] RFC 3591 Optical Interface Type MIB September 2003

::= { optIfOChSrcIntervalEntry 5 }

– OCh source current day table – Contains data for the current 24-hour performance – monitoring interval.

optIfOChSrcCurDayTable OBJECT-TYPE

SYNTAX  SEQUENCE OF OptIfOChSrcCurDayEntry
MAX-ACCESS  not-accessible
STATUS  current
DESCRIPTION
  "A table of OCh source performance monitoring information for
   the current 24-hour interval."
::= { optIfOCh 8 }

optIfOChSrcCurDayEntry OBJECT-TYPE

SYNTAX  OptIfOChSrcCurDayEntry
MAX-ACCESS  not-accessible
STATUS  current
DESCRIPTION
  "A conceptual row that contains OCh source performance
   monitoring information of an interface for the current
   24-hour interval."
INDEX  { ifIndex }
::= { optIfOChSrcCurDayTable 1 }

OptIfOChSrcCurDayEntry ::=

SEQUENCE {
  optIfOChSrcCurDaySuspectedFlag    TruthValue,
  optIfOChSrcCurDayLowOutputPower   Integer32,
  optIfOChSrcCurDayHighOutputPower  Integer32
  }

optIfOChSrcCurDaySuspectedFlag OBJECT-TYPE

SYNTAX  TruthValue
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "If true, the data in this entry may be unreliable."
::= { optIfOChSrcCurDayEntry 1 }

optIfOChSrcCurDayLowOutputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The lowest optical power monitored at the output during the

Lam, et al. Standards Track [Page 111] RFC 3591 Optical Interface Type MIB September 2003

   current 24-hour interval."
::= { optIfOChSrcCurDayEntry 2 }

optIfOChSrcCurDayHighOutputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The highest optical power monitored at the output during the
   current 24-hour interval."
::= { optIfOChSrcCurDayEntry 3 }

– OCh source previous day table – Contains data for the previous 24-hour performance – monitoring interval.

optIfOChSrcPrevDayTable OBJECT-TYPE

SYNTAX  SEQUENCE OF OptIfOChSrcPrevDayEntry
MAX-ACCESS  not-accessible
STATUS  current
DESCRIPTION
  "A table of OCh source performance monitoring information for
   the previous 24-hour interval."
::= { optIfOCh 9 }

optIfOChSrcPrevDayEntry OBJECT-TYPE

SYNTAX  OptIfOChSrcPrevDayEntry
MAX-ACCESS  not-accessible
STATUS  current
DESCRIPTION
  "A conceptual row that contains OCh source performance
   monitoring information of an interface for the previous
   24-hour interval."
INDEX  { ifIndex }
::= { optIfOChSrcPrevDayTable 1 }

OptIfOChSrcPrevDayEntry ::=

SEQUENCE {
  optIfOChSrcPrevDaySuspectedFlag    TruthValue,
  optIfOChSrcPrevDayLastOutputPower  Integer32,
  optIfOChSrcPrevDayLowOutputPower   Integer32,
  optIfOChSrcPrevDayHighOutputPower  Integer32
  }

optIfOChSrcPrevDaySuspectedFlag OBJECT-TYPE

SYNTAX  TruthValue
MAX-ACCESS  read-only

Lam, et al. Standards Track [Page 112] RFC 3591 Optical Interface Type MIB September 2003

STATUS  current
DESCRIPTION
  "If true, the data in this entry may be unreliable."
::= { optIfOChSrcPrevDayEntry 1 }

optIfOChSrcPrevDayLastOutputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The last optical power monitored at the output during the
   previous 24-hour interval."
::= { optIfOChSrcPrevDayEntry 2 }

optIfOChSrcPrevDayLowOutputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The lowest optical power monitored at the output during the
   previous 24-hour interval."
::= { optIfOChSrcPrevDayEntry 3 }

optIfOChSrcPrevDayHighOutputPower OBJECT-TYPE

SYNTAX  Integer32
UNITS  "0.1 dbm"
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The highest optical power monitored at the output during the
   previous 24-hour interval."
::= { optIfOChSrcPrevDayEntry 4 }

– the optIfOTUk group – This group handles the configuration – information for OTUk layers.

– OTUk config table

optIfOTUkConfigTable OBJECT-TYPE

SYNTAX  SEQUENCE OF OptIfOTUkConfigEntry
MAX-ACCESS  not-accessible
STATUS  current
DESCRIPTION
  "A table of OTUk configuration information."
::= { optIfOTUk 1 }

Lam, et al. Standards Track [Page 113] RFC 3591 Optical Interface Type MIB September 2003

optIfOTUkConfigEntry OBJECT-TYPE

SYNTAX  OptIfOTUkConfigEntry
MAX-ACCESS  not-accessible
STATUS  current
DESCRIPTION
  "A conceptual row that contains OTUk configuration
   information of an interface."
INDEX  { ifIndex }
::= { optIfOTUkConfigTable 1 }

OptIfOTUkConfigEntry ::=

SEQUENCE {
  optIfOTUkDirectionality              OptIfDirectionality,
  optIfOTUkBitRateK                    OptIfBitRateK,
  optIfOTUkTraceIdentifierTransmitted  OptIfTxTI,
  optIfOTUkDAPIExpected                OptIfExDAPI,
  optIfOTUkSAPIExpected                OptIfExSAPI,
  optIfOTUkTraceIdentifierAccepted     OptIfAcTI,
  optIfOTUkTIMDetMode                  OptIfTIMDetMode,
  optIfOTUkTIMActEnabled               TruthValue,
  optIfOTUkDEGThr                      OptIfDEGThr,
  optIfOTUkDEGM                        OptIfDEGM,
  optIfOTUkSinkAdaptActive             TruthValue,
  optIfOTUkSourceAdaptActive           TruthValue,
  optIfOTUkSinkFECEnabled              TruthValue,
  optIfOTUkCurrentStatus               BITS
  }

optIfOTUkDirectionality OBJECT-TYPE

SYNTAX  OptIfDirectionality
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "Indicates the directionality of the entity."
::= { optIfOTUkConfigEntry 1 }

optIfOTUkBitRateK OBJECT-TYPE

SYNTAX  OptIfBitRateK
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "Indicates the bit rate of the entity."
::= { optIfOTUkConfigEntry 2 }

optIfOTUkTraceIdentifierTransmitted OBJECT-TYPE

SYNTAX  OptIfTxTI
MAX-ACCESS  read-write
STATUS  current

Lam, et al. Standards Track [Page 114] RFC 3591 Optical Interface Type MIB September 2003

DESCRIPTION
  "The trace identifier transmitted.
   This object is applicable when optIfOTUkDirectionality
   has the value source(2) or bidirectional(3).  It must not
   be instantiated in rows where optIfOTUkDirectionality
   has the value sink(1).
   If no value is ever set by a management entity for this
   object, system-specific default value will be used.
   Any implementation that instantiates this object must
   document the system-specific default value or how it
   is derived."
::= { optIfOTUkConfigEntry 3 }

optIfOTUkDAPIExpected OBJECT-TYPE

SYNTAX  OptIfExDAPI
MAX-ACCESS  read-write
STATUS  current
DESCRIPTION
  "The DAPI expected by the receiver.
   This object is only applicable to the sink function, i.e.,
   only when optIfOTUkDirectionality has the value sink(1)
   or bidirectional(3).  It must not be instantiated in rows
   where optIfOTUkDirectionality has the value source(2).
   This object has no effect when optIfOTUkTIMDetMode has
   the value off(1)."
::= { optIfOTUkConfigEntry 4 }

optIfOTUkSAPIExpected OBJECT-TYPE

SYNTAX  OptIfExSAPI
MAX-ACCESS  read-write
STATUS  current
DESCRIPTION
  "The SAPI expected by the receiver.
   This object is only applicable to the sink function, i.e.,
   only when optIfOTUkDirectionality has the value sink(1)
   or bidirectional(3).  It must not be instantiated in rows
   where optIfOTUkDirectionality has the value source(2).
   This object has no effect when optIfOTUkTIMDetMode has
   the value off(1)."
::= { optIfOTUkConfigEntry 5 }

optIfOTUkTraceIdentifierAccepted OBJECT-TYPE

SYNTAX  OptIfAcTI
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The actual trace identifier accepted.
   This object is only applicable to the sink function, i.e.,

Lam, et al. Standards Track [Page 115] RFC 3591 Optical Interface Type MIB September 2003

   only when optIfOTUkDirectionality has the value sink(1)
   or bidirectional(3).  It must not be instantiated in rows
   where optIfOTUkDirectionality has the value source(2).
   The value of this object is unspecified when
   optIfOTUkCurrentStatus indicates a near-end defect
   (i.e., ssf(3), lof(4), ais(5), lom(6)) that prevents
   extraction of the trace message."
::= { optIfOTUkConfigEntry 6 }

optIfOTUkTIMDetMode OBJECT-TYPE

SYNTAX  OptIfTIMDetMode
MAX-ACCESS  read-write
STATUS  current
DESCRIPTION
  "Indicates the mode of the Trace Identifier Mismatch (TIM)
   Detection function.
   This object is only applicable to the sink function, i.e.,
   only when optIfOTUkDirectionality has the value sink(1)
   or bidirectional(3).  It must not be instantiated in rows
   where optIfOTUkDirectionality has the value source(2).
   The default value of this object is off(1)."
::= { optIfOTUkConfigEntry 7 }

optIfOTUkTIMActEnabled OBJECT-TYPE

SYNTAX  TruthValue
MAX-ACCESS  read-write
STATUS  current
DESCRIPTION
  "Indicates whether the Trace Identifier Mismatch (TIM)
   Consequent Action function is enabled.
   This object is only applicable to the sink function, i.e.,
   only when optIfOTUkDirectionality has the value sink(1)
   or bidirectional(3).  It must not be instantiated in rows
   where optIfOTUkDirectionality has the value source(2).
   This object has no effect when optIfOTUkTIMDetMode has
   the value off(1).
   The default value of this object is false(2)."
::= { optIfOTUkConfigEntry 8 }

optIfOTUkDEGThr OBJECT-TYPE

SYNTAX  OptIfDEGThr
UNITS   "percentage"
MAX-ACCESS  read-write
STATUS  current
DESCRIPTION
  "Indicates the threshold level for declaring a performance
   monitoring (PM) Second to be bad.  A PM Second is declared bad if
   the percentage of detected errored blocks in that second is

Lam, et al. Standards Track [Page 116] RFC 3591 Optical Interface Type MIB September 2003

   greater than or equal to optIfOTUkDEGThr.
   This object is only applicable to the sink function, i.e.,
   only when optIfOTUkDirectionality has the value sink(1)
   or bidirectional(3).  It must not be instantiated in rows
   where optIfOTUkDirectionality has the value source(2).
   The default value of this object is Severely Errored Second
   (SES) Estimator (See ITU-T G.7710)."
::= { optIfOTUkConfigEntry 9 }

optIfOTUkDEGM OBJECT-TYPE

SYNTAX  OptIfDEGM
MAX-ACCESS  read-write
STATUS  current
DESCRIPTION
  "Indicates the threshold level for declaring a Degraded Signal
   defect (dDEG).  A dDEG shall be declared if optIfOTUkDEGM
   consecutive bad PM Seconds are detected.
   This object is only applicable to the sink function, i.e.,
   only when optIfOTUkDirectionality has the value sink(1)
   or bidirectional(3).  It must not be instantiated in rows
   where optIfOTUkDirectionality has the value source(2).
   The default value of this object is 7 (See ITU-T G.7710)."
::= { optIfOTUkConfigEntry 10 }

optIfOTUkSinkAdaptActive OBJECT-TYPE

SYNTAX  TruthValue
MAX-ACCESS  read-write
STATUS  current
DESCRIPTION
  "Indicates whether the sink adaptation function is activated or
   not.
   This object is only applicable to the sink function, i.e.,
   only when optIfOTUkDirectionality has the value sink(1)
   or bidirectional(3).  It must not be instantiated in rows
   where optIfOTUkDirectionality has the value source(2).
   The default value of this object is false(2)."
::= { optIfOTUkConfigEntry 11 }

optIfOTUkSourceAdaptActive OBJECT-TYPE

SYNTAX  TruthValue
MAX-ACCESS  read-write
STATUS  current
DESCRIPTION
  "Indicates whether the source adaptation function is activated or
   not.
   This object is only applicable to the source function, i.e.,
   only when optIfOTUkDirectionality has the value source(2)
   or bidirectional(3).  It must not be instantiated in rows

Lam, et al. Standards Track [Page 117] RFC 3591 Optical Interface Type MIB September 2003

   where optIfOTUkDirectionality has the value sink(1).
   The default value of this object is false(2)."
::= { optIfOTUkConfigEntry 12 }

optIfOTUkSinkFECEnabled OBJECT-TYPE

SYNTAX  TruthValue
MAX-ACCESS  read-write
STATUS  current
DESCRIPTION
  "If Forward Error Correction (FEC) is supported, this object
   indicates whether FEC at the OTUk sink adaptation function is
   enabled or not.
   This object is only applicable to the sink function, i.e.,
   only when optIfOTUkDirectionality has the value sink(1)
   or bidirectional(3).  It must not be instantiated in rows
   where optIfOTUkDirectionality has the value source(2).
   The default value of this object is true(1)."
::= { optIfOTUkConfigEntry 13 }

optIfOTUkCurrentStatus OBJECT-TYPE

SYNTAX  BITS {
  tim(0),
  deg(1),
  bdi(2),
  ssf(3),
  lof(4),
  ais(5),
  lom(6)
  }
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "Indicates the defect condition of the entity, if any.
   This object is only applicable to the sink function, i.e.,
   only when optIfOTUkDirectionality has the value sink(1)
   or bidirectional(3).  It must not be instantiated in rows
   where optIfOTUkDirectionality has the value source(2)."
::= { optIfOTUkConfigEntry 14 }

– GCC0 config table

optIfGCC0ConfigTable OBJECT-TYPE

SYNTAX  SEQUENCE OF OptIfGCC0ConfigEntry
MAX-ACCESS  not-accessible
STATUS  current
DESCRIPTION
  "A table of GCC0 configuration information."
::= { optIfOTUk 2 }

Lam, et al. Standards Track [Page 118] RFC 3591 Optical Interface Type MIB September 2003

optIfGCC0ConfigEntry OBJECT-TYPE

SYNTAX  OptIfGCC0ConfigEntry
MAX-ACCESS  not-accessible
STATUS  current
DESCRIPTION
  "A conceptual row that contains GCC0 configuration
   information of an interface.  Each instance must
   correspond to an instance of optIfOTUkConfigEntry.
   Separate source and/or sink instances may exist
   for a given ifIndex value, or a single bidirectional
   instance may exist, but a bidirectional instance may
   not coexist with a source or sink instance.
   Instances of this conceptual row persist across
   agent restarts."
INDEX  { ifIndex, optIfGCC0Directionality }
::= { optIfGCC0ConfigTable 1 }

OptIfGCC0ConfigEntry ::=

SEQUENCE {
  optIfGCC0Directionality            OptIfDirectionality,
  optIfGCC0Application               SnmpAdminString,
  optIfGCC0RowStatus                 RowStatus
  }

optIfGCC0Directionality OBJECT-TYPE

SYNTAX  OptIfDirectionality
MAX-ACCESS  not-accessible
STATUS  current
DESCRIPTION
  "Indicates the directionality of the entity.
   The values source(2) and bidirectional(3) are
   not allowed if the corresponding instance of
   optIfOTUkDirectionality has the value sink(1).
   The values sink(1) and bidirectional(3) are
   not allowed if the corresponding instance of
   optIfOTUkDirectionality has the value source(2)."
::= { optIfGCC0ConfigEntry 1 }

optIfGCC0Application OBJECT-TYPE

SYNTAX  SnmpAdminString
MAX-ACCESS  read-create
STATUS  current
DESCRIPTION
  "Indicates the application transported by the GCC0 entity.
   Example applications are ECC, User data channel.
   The value of this object may not be changed when
   optIfGCC0RowStatus has the value active(1)."

Lam, et al. Standards Track [Page 119] RFC 3591 Optical Interface Type MIB September 2003

::= { optIfGCC0ConfigEntry 2 }

optIfGCC0RowStatus OBJECT-TYPE

SYNTAX  RowStatus
MAX-ACCESS  read-create
STATUS  current
DESCRIPTION
  "This columnar object is used for creating and deleting a
   conceptual row of the optIfGCC0 config table.
   It is used to model the addGCC0Access and removeGCC0Access
   operations of an OTUk_TTP for GCC0 access control as defined
   in G.874.1.  Setting RowStatus to createAndGo or createAndWait
   implies addGCC0Access.  Setting RowStatus to destroy implies
   removeGCC0Access."
::= { optIfGCC0ConfigEntry 3 }

– the optIfODUk group – This group handles the configuration information – for the ODUk layers.

– ODUk config table

optIfODUkConfigTable OBJECT-TYPE

SYNTAX  SEQUENCE OF OptIfODUkConfigEntry
MAX-ACCESS  not-accessible
STATUS  current
DESCRIPTION
  "A table of ODUk configuration information."
::= { optIfODUk 1 }

optIfODUkConfigEntry OBJECT-TYPE

SYNTAX  OptIfODUkConfigEntry
MAX-ACCESS  not-accessible
STATUS  current
DESCRIPTION
  "A conceptual row that contains ODUk configuration
   information of an interface."
INDEX  { ifIndex }
::= { optIfODUkConfigTable 1 }

OptIfODUkConfigEntry ::=

SEQUENCE {
  optIfODUkDirectionality              OptIfDirectionality,
  optIfODUkBitRateK                    OptIfBitRateK,
  optIfODUkTcmFieldsInUse              BITS,
  optIfODUkPositionSeqCurrentSize      Unsigned32,
  optIfODUkTtpPresent                  TruthValue
  }

Lam, et al. Standards Track [Page 120] RFC 3591 Optical Interface Type MIB September 2003

optIfODUkDirectionality OBJECT-TYPE

SYNTAX  OptIfDirectionality
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "Indicates the directionality of the entity."
::= { optIfODUkConfigEntry 1 }

optIfODUkBitRateK OBJECT-TYPE

SYNTAX  OptIfBitRateK
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "Indicates the bit rate of the entity."
::= { optIfODUkConfigEntry 2 }

optIfODUkTcmFieldsInUse OBJECT-TYPE

SYNTAX  BITS {
  tcmField1(0),
  tcmField2(1),
  tcmField3(2),
  tcmField4(3),
  tcmField5(4),
  tcmField6(5)
  }
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "Indicates the TCM field(s) that are currently in use.
   The positions of the bits correspond to the TCM fields.
   A bit that is set to 1 means that the corresponding TCM
   field is used.  This object will be updated when rows are
   created in or deleted from the optIfODUkTConfigTable, or
   the optIfODUkTNimConfigTable."
::= { optIfODUkConfigEntry 3 }

optIfODUkPositionSeqCurrentSize OBJECT-TYPE

SYNTAX  Unsigned32
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "This variable indicates the current size of the position
   sequence (i.e., number of TCM function and/or GCC12
   access that have been created in the ODUk interface).
   When the value of this variable is greater than zero,
   it means that one or more TCM function and/or GCC12
   access have been created in the ODUk interface.  In this
   case, there will be as many rows in the

Lam, et al. Standards Track [Page 121] RFC 3591 Optical Interface Type MIB September 2003

   optIfODUkPositionSeqTable as the value of
   optIfODUkPositionSeqCurrentSize  corresponding to this
   ODUk interface, one row for each TCM function or GCC12
   access.  The position of the TCM function and/or
   GCC12 access within the sequence is indicated by the
   optIfODUkPositionSeqPosition variable in
   optIfODUkPositionSeqTable.
   The optIfODUkPositionSeqTable also provides pointers
   to the corresponding TCM function (optIfODUkT) and
   GCC12 access (optIfGCC12) entities."
::= { optIfODUkConfigEntry 4 }

optIfODUkTtpPresent OBJECT-TYPE

SYNTAX  TruthValue
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "This object has the value true(1) if the ifEntry under which
   it is instantiated contains an ODUk Trail Termination Point,
   i.e., is the endpoint of an ODUk path.  In that case there
   will be a corresponding row in the ODUk TTP config table and
   it will not be possible to create corresponding rows in the
   ODUk NIM config table.  This object has the value false(2)
   if the ifEntry under which it is instantiated contains an
   intermediate ODUk Connection Termination Point.  In that case
   there is no corresponding row in the ODUk TTP config table,
   but it will be possible to create corresponding rows in the
   ODUk NIM config table.  This object also affects the allowable
   options in rows created in the GCC12 config table and in the
   ODUkT config table, as specified in the DESCRIPTION clauses
   of the columns in those tables."
::= { optIfODUkConfigEntry 5 }

– ODUk Trail Termination Point (TTP) config table

optIfODUkTtpConfigTable OBJECT-TYPE

SYNTAX  SEQUENCE OF OptIfODUkTtpConfigEntry
MAX-ACCESS  not-accessible
STATUS  current
DESCRIPTION
  "A table of ODUk TTP configuration information."
::= { optIfODUk 2 }

optIfODUkTtpConfigEntry OBJECT-TYPE

SYNTAX  OptIfODUkTtpConfigEntry
MAX-ACCESS  not-accessible
STATUS  current
DESCRIPTION

Lam, et al. Standards Track [Page 122] RFC 3591 Optical Interface Type MIB September 2003

  "A conceptual row that contains ODUk TTP configuration
   information of an interface."
INDEX  { ifIndex }
::= { optIfODUkTtpConfigTable 1 }

OptIfODUkTtpConfigEntry ::=

SEQUENCE {
  optIfODUkTtpTraceIdentifierTransmitted  OptIfTxTI,
  optIfODUkTtpDAPIExpected                OptIfExDAPI,
  optIfODUkTtpSAPIExpected                OptIfExSAPI,
  optIfODUkTtpTraceIdentifierAccepted     OptIfAcTI,
  optIfODUkTtpTIMDetMode                  OptIfTIMDetMode,
  optIfODUkTtpTIMActEnabled               TruthValue,
  optIfODUkTtpDEGThr                      OptIfDEGThr,
  optIfODUkTtpDEGM                        OptIfDEGM,
  optIfODUkTtpCurrentStatus               BITS
  }

optIfODUkTtpTraceIdentifierTransmitted OBJECT-TYPE

SYNTAX  OptIfTxTI
MAX-ACCESS  read-write
STATUS  current
DESCRIPTION
  "The trace identifier transmitted.
   This object is applicable when optIfODUkDirectionality
   has the value source(2) or bidirectional(3).  It must not
   be instantiated in rows where optIfODUkDirectionality
   has the value sink(1).
   If no value is ever set by a management entity for this
   object, system-specific default value will be used.
   Any implementation that instantiates this object must
   document the system-specific default value or how it
   is derived."
::= { optIfODUkTtpConfigEntry 1 }

optIfODUkTtpDAPIExpected OBJECT-TYPE

SYNTAX  OptIfExDAPI
MAX-ACCESS  read-write
STATUS  current
DESCRIPTION
  "The DAPI expected by the receiver.
   This object is only applicable to the sink function, i.e.,
   only when optIfODUkDirectionality has the value sink(1)
   or bidirectional(3).  It must not be instantiated in rows
   where optIfODUkDirectionality has the value source(2).
   This object has no effect when optIfODUkTtpTIMDetMode has
   the value off(1)."
::= { optIfODUkTtpConfigEntry 2 }

Lam, et al. Standards Track [Page 123] RFC 3591 Optical Interface Type MIB September 2003

optIfODUkTtpSAPIExpected OBJECT-TYPE

SYNTAX  OptIfExSAPI
MAX-ACCESS  read-write
STATUS  current
DESCRIPTION
  "The SAPI expected by the receiver.
   This object is only applicable to the sink function, i.e.,
   only when optIfODUkDirectionality has the value sink(1)
   or bidirectional(3).  It must not be instantiated in rows
   where optIfODUkDirectionality has the value source(2).
   This object has no effect when optIfODUkTtpTIMDetMode has
   the value off(1)."
::= { optIfODUkTtpConfigEntry 3 }

optIfODUkTtpTraceIdentifierAccepted OBJECT-TYPE

SYNTAX  OptIfAcTI
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The actual trace identifier accepted.
   This object is only applicable to the sink function, i.e.,
   only when optIfODUkDirectionality has the value sink(1)
   or bidirectional(3).  It must not be instantiated in rows
   where optIfODUkDirectionality has the value source(2).
   The value of this object is unspecified when
   optIfODUkTtpCurrentStatus indicates a near-end defect
   (i.e., oci(0), lck(1), ssf(5)) that prevents extraction
   of the trace message."
::= { optIfODUkTtpConfigEntry 4 }

optIfODUkTtpTIMDetMode OBJECT-TYPE

SYNTAX  OptIfTIMDetMode
MAX-ACCESS  read-write
STATUS  current
DESCRIPTION
  "Indicates the mode of the Trace Identifier Mismatch (TIM)
   Detection function.
   This object is only applicable to the sink function, i.e.,
   only when optIfODUkDirectionality has the value sink(1)
   or bidirectional(3).  It must not be instantiated in rows
   where optIfODUkDirectionality has the value source(2).
   The default value of this object is off(1)."
::= { optIfODUkTtpConfigEntry 5 }

optIfODUkTtpTIMActEnabled OBJECT-TYPE

SYNTAX  TruthValue
MAX-ACCESS  read-write
STATUS  current

Lam, et al. Standards Track [Page 124] RFC 3591 Optical Interface Type MIB September 2003

DESCRIPTION
  "Indicates whether the Trace Identifier Mismatch (TIM)
   Consequent Action function is enabled.
   This object is only applicable to the sink function, i.e.,
   only when optIfODUkDirectionality has the value sink(1)
   or bidirectional(3).  It must not be instantiated in rows
   where optIfODUkDirectionality has the value source(2).
   This object has no effect when optIfODUkTtpTIMDetMode has
   the value off(1).
   The default value of this object is false(2)."
::= { optIfODUkTtpConfigEntry 6 }

optIfODUkTtpDEGThr OBJECT-TYPE

SYNTAX  OptIfDEGThr
UNITS   "percentage"
MAX-ACCESS  read-write
STATUS  current
DESCRIPTION
  "Indicates the threshold level for declaring a performance
   monitoring (PM) Second to be bad.  A PM Second is declared bad if
   the percentage of detected errored blocks in that second is
   greater than or equal to optIfODUkDEGThr.
   This object is only applicable to the sink function, i.e.,
   only when optIfODUkDirectionality has the value sink(1)
   or bidirectional(3).  It must not be instantiated in rows
   where optIfODUkDirectionality has the value source(2).
   The default value of this object is Severely Errored Second
   (SES) Estimator (See ITU-T G.7710)."
::= { optIfODUkTtpConfigEntry 7 }

optIfODUkTtpDEGM OBJECT-TYPE

SYNTAX  OptIfDEGM
MAX-ACCESS  read-write
STATUS  current
DESCRIPTION
  "Indicates the threshold level for declaring a Degraded Signal
   defect (dDEG).  A dDEG shall be declared if optIfODUkDEGM
   consecutive bad PM Seconds are detected.
   This object is only applicable to the sink function, i.e.,
   only when optIfODUkDirectionality has the value sink(1)
   or bidirectional(3).  It must not be instantiated in rows
   where optIfODUkDirectionality has the value source(2).
   The default value of this object is 7 (See ITU-T G.7710)."
::= { optIfODUkTtpConfigEntry 8 }

optIfODUkTtpCurrentStatus OBJECT-TYPE

SYNTAX  BITS {
  oci(0),

Lam, et al. Standards Track [Page 125] RFC 3591 Optical Interface Type MIB September 2003

  lck(1),
  tim(2),
  deg(3),
  bdi(4),
  ssf(5)
  }
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "Indicates the defect condition of the entity, if any.
   This object is only applicable to the sink function, i.e.,
   only when optIfODUkDirectionality has the value sink(1)
   or bidirectional(3).  It must not be instantiated in rows
   where optIfODUkDirectionality has the value source(2)."
::= { optIfODUkTtpConfigEntry 9 }

– ODUk Position Sequence table

optIfODUkPositionSeqTable OBJECT-TYPE

SYNTAX  SEQUENCE OF OptIfODUkPositionSeqEntry
MAX-ACCESS  not-accessible
STATUS  current
DESCRIPTION
  "A table of ODUk Position Sequence information."
::= { optIfODUk 3 }

optIfODUkPositionSeqEntry OBJECT-TYPE

SYNTAX  OptIfODUkPositionSeqEntry
MAX-ACCESS  not-accessible
STATUS  current
DESCRIPTION
  "A conceptual row that contains ODUk position sequence
   information of an ODUk interface.  The ODUk interface
   is identified by the ifIndex.  Associated with each
   ODUk interface there may be one of more conceptual
   rows in the optIfODUkPositionSeqTable.  Each row
   represents a TCM or GCC12 access function within the
   associated ODUk interface.  Rows of the
   optIfODUkPositionSeqTable table are created/deleted
   as the result of the creation/deletion of the optIfODUkT
   or optIfGCC12 entities."
INDEX  { ifIndex, optIfODUkPositionSeqIndex }
::= { optIfODUkPositionSeqTable 1 }

OptIfODUkPositionSeqEntry ::=

SEQUENCE {
  optIfODUkPositionSeqIndex            Unsigned32,
  optIfODUkPositionSeqPosition         Unsigned32,

Lam, et al. Standards Track [Page 126] RFC 3591 Optical Interface Type MIB September 2003

  optIfODUkPositionSeqPointer          RowPointer
  }

optIfODUkPositionSeqIndex OBJECT-TYPE

SYNTAX  Unsigned32 (1..4294967295)
MAX-ACCESS  not-accessible
STATUS  current
DESCRIPTION
  "This variable identifies a row in the
   optIfODUkPositionSeqTable Table.
   Each row of the optIfODUkPositionSeqTable Table
   represents a TCM or GCC12 access function within the
   associated ODUk interface."
::= { optIfODUkPositionSeqEntry 1 }

optIfODUkPositionSeqPosition OBJECT-TYPE

SYNTAX  Unsigned32
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "This variable indicates the position of the TCM or
   GCC12 access function within the sequence of TCMs &
   GCC12 access functions of the associated ODUk
   interface.  The TCM or GCC12 presented by this row is
   referenced by the optIfODUkPositionSeqPointer variable."
::= { optIfODUkPositionSeqEntry 2 }

optIfODUkPositionSeqPointer OBJECT-TYPE

SYNTAX  RowPointer
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "This variable identifies the TCM or GCC12 access function
   by pointing to the corresponding optIfODUkT or optIfGCC12
   entity."
::= { optIfODUkPositionSeqEntry 3 }

– ODUk Non-intrusive monitoring (Nim) config table

optIfODUkNimConfigTable OBJECT-TYPE

SYNTAX  SEQUENCE OF OptIfODUkNimConfigEntry
MAX-ACCESS  not-accessible
STATUS  current
DESCRIPTION
  "A table of ODUkNim configuration information."
::= { optIfODUk 4 }

optIfODUkNimConfigEntry OBJECT-TYPE

Lam, et al. Standards Track [Page 127] RFC 3591 Optical Interface Type MIB September 2003

SYNTAX  OptIfODUkNimConfigEntry
MAX-ACCESS  not-accessible
STATUS  current
DESCRIPTION
  "A conceptual row that contains ODUkNim configuration
   information of an interface.  Each instance must
   correspond to an instance of optIfODUkConfigEntry
   for which optIfODUkTtpPresent has the value false(2).
   Instances of this conceptual row persist across
   agent restarts, and read-create columns other
   than the status column may be modified while the
   row is active."
INDEX  { ifIndex, optIfODUkNimDirectionality }
::= { optIfODUkNimConfigTable 1 }

OptIfODUkNimConfigEntry ::=

SEQUENCE {
  optIfODUkNimDirectionality              OptIfSinkOrSource,
  optIfODUkNimDAPIExpected                OptIfExDAPI,
  optIfODUkNimSAPIExpected                OptIfExSAPI,
  optIfODUkNimTraceIdentifierAccepted     OptIfAcTI,
  optIfODUkNimTIMDetMode                  OptIfTIMDetMode,
  optIfODUkNimTIMActEnabled               TruthValue,
  optIfODUkNimDEGThr                      OptIfDEGThr,
  optIfODUkNimDEGM                        OptIfDEGM,
  optIfODUkNimCurrentStatus               BITS,
  optIfODUkNimRowStatus                   RowStatus
  }

optIfODUkNimDirectionality OBJECT-TYPE

SYNTAX  OptIfSinkOrSource
MAX-ACCESS  not-accessible
STATUS  current
DESCRIPTION
  "Specifies the monitor point for the ODUk Path non-intrusive
   monitoring function.  The value source(2) is not allowed
   if the corresponding instance of optIfODUkDirectionality
   has the value sink(1), and the value sink(1) is not allowed
   if the corresponding instance of optIfODUkDirectionality
   has the value source(2).  Either the value sink(1) or
   source(2) is allowed if the corresponding instance of
   optIfODUkDirectionality has the value bidirectional(3).
   The value sink(1) means monitoring at the sink direction
   path signal of the ODUk CTP.
   The value source(2) means monitoring at the source direction

Lam, et al. Standards Track [Page 128] RFC 3591 Optical Interface Type MIB September 2003

   path signal of the ODUk CTP.  Monitoring the source direction
   of an ODUk CTP is necessary in those cases where the ODUk CTP
   is at an SNCP (Subnetwork Connection Protection) end (e.g., see
   Figure I.1.2/G.874.1).  If one would like to get the performance
   of the protected connection, one cannot use the NIM function
   at both ODUk CTP sinks (before the matrix), instead one should
   monitor the signal at the source ODUk CTP after the matrix."
::= { optIfODUkNimConfigEntry 1 }

optIfODUkNimDAPIExpected OBJECT-TYPE

SYNTAX  OptIfExDAPI
MAX-ACCESS  read-create
STATUS  current
DESCRIPTION
  "The DAPI expected by the receiver.
   This object has no effect if optIfODUkNimTIMDetMode has
   the value off(1) or sapi(3)."
::= { optIfODUkNimConfigEntry 2 }

optIfODUkNimSAPIExpected OBJECT-TYPE

SYNTAX  OptIfExSAPI
MAX-ACCESS  read-create
STATUS  current
DESCRIPTION
  "The SAPI expected by the receiver.
   This object has no effect if optIfODUkNimTIMDetMode has
   the value off(1) or dapi(2)."
::= { optIfODUkNimConfigEntry 3 }

optIfODUkNimTraceIdentifierAccepted OBJECT-TYPE

SYNTAX  OptIfAcTI
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The actual trace identifier accepted.  The value of
   this object is unspecified if optIfODUkNimCurrentStatus
   has any of the bit positions oci(0), lck(1), or ssf(5)
   set or if optIfODUkNimRowStatus has any value other
   than active(1)."
::= { optIfODUkNimConfigEntry 4 }

optIfODUkNimTIMDetMode OBJECT-TYPE

SYNTAX  OptIfTIMDetMode
MAX-ACCESS  read-create
STATUS  current
DESCRIPTION
  "Indicates the mode of the Trace Identifier Mismatch (TIM)
   Detection function."

Lam, et al. Standards Track [Page 129] RFC 3591 Optical Interface Type MIB September 2003

::= { optIfODUkNimConfigEntry 5 }

optIfODUkNimTIMActEnabled OBJECT-TYPE

SYNTAX  TruthValue
MAX-ACCESS  read-create
STATUS  current
DESCRIPTION
  "Indicates whether the Trace Identifier Mismatch (TIM)
   Consequent Action function is enabled."
::= { optIfODUkNimConfigEntry 6 }

optIfODUkNimDEGThr OBJECT-TYPE

SYNTAX  OptIfDEGThr
UNITS   "percentage"
MAX-ACCESS  read-create
STATUS  current
DESCRIPTION
  "Indicates the threshold level for declaring a performance
   monitoring (PM) Second to be bad.  A PM Second is declared bad
   if the percentage of detected errored blocks in that second is
   greater than or equal to optIfODUkNimDEGThr."
::= { optIfODUkNimConfigEntry 7 }

optIfODUkNimDEGM OBJECT-TYPE

SYNTAX  OptIfDEGM
MAX-ACCESS  read-create
STATUS  current
DESCRIPTION
  "Indicates the threshold level for declaring a Degraded Signal
   defect (dDEG).  A dDEG shall be declared if optIfODUkNimDEGM
   consecutive bad PM Seconds are detected."
::= { optIfODUkNimConfigEntry 8 }

optIfODUkNimCurrentStatus OBJECT-TYPE

SYNTAX  BITS {
  oci(0),
  lck(1),
  tim(2),
  deg(3),
  bdi(4),
  ssf(5)
  }
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "Indicates the defect condition of the entity, if
   any.  The value of this object is unspecified if
   optIfODUkNimRowStatus has any value other than

Lam, et al. Standards Track [Page 130] RFC 3591 Optical Interface Type MIB September 2003

   active(1)."
::= { optIfODUkNimConfigEntry 9 }

optIfODUkNimRowStatus OBJECT-TYPE

SYNTAX  RowStatus
MAX-ACCESS  read-create
STATUS  current
DESCRIPTION
  "This columnar object is used for creating and deleting
   a conceptual row of the optIfODUkNim config table.
   It is used to model the activateNim and deactivateNim
   operations of an OTUk_CTP for non-intrusive monitoring
   control as defined in G.874.1.  Setting RowStatus to
   createAndGo or createAndWait implies activateNim.
   Setting RowStatus to destroy implies deactivateNim."
::= { optIfODUkNimConfigEntry 10 }

– GCC12 config table

optIfGCC12ConfigTable OBJECT-TYPE

SYNTAX  SEQUENCE OF OptIfGCC12ConfigEntry
MAX-ACCESS  not-accessible
STATUS  current
DESCRIPTION
  "A table of GCC12 configuration information.
   The GCC function processes the GCC overhead bytes passing
   through them but leave the remainder of the ODUk overhead
   and payload data alone."
::= { optIfODUk 5 }

optIfGCC12ConfigEntry OBJECT-TYPE

SYNTAX  OptIfGCC12ConfigEntry
MAX-ACCESS  not-accessible
STATUS  current
DESCRIPTION
  "A conceptual row that contains GCC12 configuration
   information of an interface.  Each instance must
   correspond to an instance of optIfODUkConfigEntry.
   Separate instances providing GCC1-only access and
   GCC2-only access may exist for a given ifIndex value,
   or a single instance providing GCC1 + GCC2 may exist,
   but a GCC1 + GCC2 instance may not coexist with a
   GCC1-only or GCC2-only instance.
   Instances of this conceptual row persist across agent
   restarts."
INDEX  { ifIndex, optIfGCC12Codirectional, optIfGCC12GCCAccess }
::= { optIfGCC12ConfigTable 1 }

Lam, et al. Standards Track [Page 131] RFC 3591 Optical Interface Type MIB September 2003

OptIfGCC12ConfigEntry ::=

SEQUENCE {
  optIfGCC12Codirectional      TruthValue,
  optIfGCC12GCCAccess          INTEGER,
  optIfGCC12GCCPassThrough     TruthValue,
  optIfGCC12Application        SnmpAdminString,
  optIfGCC12RowStatus          RowStatus
  }

optIfGCC12Codirectional OBJECT-TYPE

SYNTAX  TruthValue
MAX-ACCESS  not-accessible
STATUS  current
DESCRIPTION
  "Indicates the directionality of the GCC12 termination with
   respect to the associated ODUk CTP.  The value true(1) means
   that the sink part of the GCC12 extracts COMMS data from the
   signal at the input to the ODUk CTP sink and the source part
   of the GCC12 inserts COMMS data into the signal at the output
   of the ODUk CTP source.  The value false(2) means that the
   sink part of the GCC12 extracts COMMS data from the signal at
   the output of the ODUk CTP source and the source part of the
   GCC12 inserts COMMS data into the signal at the input of the
   ODUk CTP sink.  This attribute may assume either value when
   the corresponding instance of optIfODUkTtpPresent has the
   value false(2).  When the value of the corresponding instance
   of optIfODUkTtpPresent is true(1) then the only value allowed
   for this attribute is true(1)."
::= { optIfGCC12ConfigEntry 1 }

optIfGCC12GCCAccess OBJECT-TYPE

SYNTAX  INTEGER {
   gcc1 (1),
   gcc2 (2),
   gcc1and2 (3)
 }
MAX-ACCESS  not-accessible
STATUS  current
DESCRIPTION
  "Indicates the GCC access represented by the entity."
::= { optIfGCC12ConfigEntry 2 }

optIfGCC12GCCPassThrough OBJECT-TYPE

SYNTAX  TruthValue
MAX-ACCESS  read-create
STATUS  current
DESCRIPTION
  "Controls whether the selected GCC overhead bytes are passed

Lam, et al. Standards Track [Page 132] RFC 3591 Optical Interface Type MIB September 2003

   through or modified.  The value true(1) means that the selected
   GCC overhead bytes are passed through unmodified from the ODUk
   CTP input to the ODUk CTP output.  The value false(2) means that
   the selected GCC overhead bytes are set to zero at the ODUk CTP
   output after the extraction of the COMMS data.  This object has
   no effect if the corresponding instance of optIfODUkTtpPresent
   has the value true(1).
   The value of this object may not be changed when
   optIfGCC12RowStatus has the value active(1)."
::= { optIfGCC12ConfigEntry 3 }

optIfGCC12Application OBJECT-TYPE

SYNTAX  SnmpAdminString
MAX-ACCESS  read-create
STATUS  current
DESCRIPTION
  "Indicates the application transported by the GCC12 entity.
   Example applications are ECC, User data channel.
   The value of this object may not be changed when
   optIfGCC12RowStatus has the value active(1)."
::= { optIfGCC12ConfigEntry 4 }

optIfGCC12RowStatus OBJECT-TYPE

SYNTAX  RowStatus
MAX-ACCESS  read-create
STATUS  current
DESCRIPTION
  "This columnar object is used for creating and deleting
   a conceptual row of the optIfGCC12 config table.  It is
   used to model the addGCC12Access and removeGCC12Access
   operations of an ODUk_CTP or ODUk_TTP for GCC12 access
   control as defined in G.874.1.  Setting RowStatus to
   createAndGo or createAndWait implies addGCC12Access.
   Setting RowStatus to destroy implies removeGCC12Access.
   Successful addition/removal of the GCC12 access function
   will result in updating the
   optIfODUkPositionSeqCurrentSize variable and the
   optIfODUkPositionSeqTable table of the associated
   ODUk entry in the optIfODUkConfigTable."
::= { optIfGCC12ConfigEntry 5 }

– the optIfODUkT group – This group handles the configuration information – for the ODUkT layers.

– ODUkT config table

Lam, et al. Standards Track [Page 133] RFC 3591 Optical Interface Type MIB September 2003

optIfODUkTConfigTable OBJECT-TYPE

SYNTAX  SEQUENCE OF OptIfODUkTConfigEntry
MAX-ACCESS  not-accessible
STATUS  current
DESCRIPTION
  "A table of ODUkT configuration information."
::= { optIfODUkT 1 }

optIfODUkTConfigEntry OBJECT-TYPE

SYNTAX  OptIfODUkTConfigEntry
MAX-ACCESS  not-accessible
STATUS  current
DESCRIPTION
  "A conceptual row that contains ODUkT configuration
   information of an interface.  Each instance must
   correspond to an instance of optIfODUkConfigEntry.
   Rows in this table are mutually exclusive with rows
   in the ODUkT NIM config table -- in other words, this
   row object may not be instantiated for a given pair
   of ifIndex and TCM field values if a corresponding
   instance of optIfODUkTNimConfigEntry already exists.
   Instances of this conceptual row persist across agent
   restarts.  Except where noted otherwise, read-create
   columns other than the status column may be modified
   while the row is active."
INDEX  { ifIndex, optIfODUkTTcmField, optIfODUkTCodirectional }
::= { optIfODUkTConfigTable 1 }

OptIfODUkTConfigEntry ::=

SEQUENCE {
  optIfODUkTTcmField                    Unsigned32,
  optIfODUkTCodirectional               TruthValue,
  optIfODUkTTraceIdentifierTransmitted  OptIfTxTI,
  optIfODUkTDAPIExpected                OptIfExDAPI,
  optIfODUkTSAPIExpected                OptIfExSAPI,
  optIfODUkTTraceIdentifierAccepted     OptIfAcTI,
  optIfODUkTTIMDetMode                  OptIfTIMDetMode,
  optIfODUkTTIMActEnabled               TruthValue,
  optIfODUkTDEGThr                      OptIfDEGThr,
  optIfODUkTDEGM                        OptIfDEGM,
  optIfODUkTSinkMode                    INTEGER,
  optIfODUkTSinkLockSignalAdminState    INTEGER,
  optIfODUkTSourceLockSignalAdminState  INTEGER,
  optIfODUkTCurrentStatus               BITS,
  optIfODUkTRowStatus                   RowStatus
  }

Lam, et al. Standards Track [Page 134] RFC 3591 Optical Interface Type MIB September 2003

optIfODUkTTcmField OBJECT-TYPE

SYNTAX  Unsigned32 (1..6)
MAX-ACCESS  not-accessible
STATUS  current
DESCRIPTION
  "Indicates the tandem connection monitoring
   field of the ODUk OH.  Valid values are
   integers from 1 to 6."
::= { optIfODUkTConfigEntry 1 }

optIfODUkTCodirectional OBJECT-TYPE

SYNTAX  TruthValue
MAX-ACCESS  not-accessible
STATUS  current
DESCRIPTION
  "Indicates the directionality of the ODUkT termination point with
   respect to the associated ODUk CTP.  The value true(1) means
   that the sink part of the ODUkT TP extracts TCM data from the
   signal at the input to the ODUk CTP sink and the source part
   of the ODUkT TP inserts TCM data into the signal at the output
   of the ODUk CTP source.  The value false(2) means that the
   sink part of the ODUkT TP extracts TCM data from the signal at
   the output of the ODUk CTP source and the source part of the
   ODUkT TP inserts TCM data into the signal at the input of the
   ODUk CTP sink.  This attribute may assume either value when
   the corresponding instance of optIfODUkTtpPresent has the
   value false(2).  When the value of the corresponding instance
   of optIfODUkTtpPresent is true(1) then the only value allowed
   for this attribute is true(1)."
::= { optIfODUkTConfigEntry 2 }

optIfODUkTTraceIdentifierTransmitted OBJECT-TYPE

SYNTAX  OptIfTxTI
MAX-ACCESS  read-create
STATUS  current
DESCRIPTION
  "The trace identifier transmitted.
   This object is applicable only to the following three cases.
     (i) optIfODUkDirectionality has the value bidirectional(3), or
     (ii) optIfODUkDirectionality has the value sink(1) and
          optIfODUkTCodirectional has the value false(2), or
     (iii) optIfODUkDirectionality has the value source(3) and
           optIfODUkTCodirectional has the value true(1).
   It must not be instantiated in rows for all other cases."
::= { optIfODUkTConfigEntry 3 }

optIfODUkTDAPIExpected OBJECT-TYPE

SYNTAX  OptIfExDAPI

Lam, et al. Standards Track [Page 135] RFC 3591 Optical Interface Type MIB September 2003

MAX-ACCESS  read-create
STATUS  current
DESCRIPTION
  "The DAPI expected by the receiver.
   This object is applicable only to the following three cases.
     (i) optIfODUkDirectionality has the value bidirectional(3), or
     (ii) optIfODUkDirectionality has the value sink(1) and
          optIfODUkTCodirectional has the value true(1), or
     (iii) optIfODUkDirectionality has the value source(3) and
           optIfODUkTCodirectional has the value false(2).
   It must not be instantiated in rows for all other cases.
   This object has no effect when optIfODUkTTIMDetMode has
   the value off(1)."
::= { optIfODUkTConfigEntry 4 }

optIfODUkTSAPIExpected OBJECT-TYPE

SYNTAX  OptIfExSAPI
MAX-ACCESS  read-create
STATUS  current
DESCRIPTION
  "The SAPI expected by the receiver.
   This object is applicable only to the following three cases.
     (i) optIfODUkDirectionality has the value bidirectional(3), or
     (ii) optIfODUkDirectionality has the value sink(1) and
          optIfODUkTCodirectional has the value true(1), or
     (iii) optIfODUkDirectionality has the value source(3) and
           optIfODUkTCodirectional has the value false(2).
   It must not be instantiated in rows for all other cases.
   This object has no effect when optIfODUkTTIMDetMode has
   the value off(1)."
::= { optIfODUkTConfigEntry 5 }

optIfODUkTTraceIdentifierAccepted OBJECT-TYPE

SYNTAX  OptIfAcTI
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The actual trace identifier accepted.
   This object is applicable only to the following three cases.
     (i) optIfODUkDirectionality has the value bidirectional(3), or
     (ii) optIfODUkDirectionality has the value sink(1) and
          optIfODUkTCodirectional has the value true(1), or
     (iii) optIfODUkDirectionality has the value source(3) and
           optIfODUkTCodirectional has the value false(2).
   It must not be instantiated in rows for all other cases.
   The value of this object is unspecified when
   optIfODUkTCurrentStatus indicates a near-end defect
   (i.e., oci(0), lck(1), ssf(5)) that prevents extraction

Lam, et al. Standards Track [Page 136] RFC 3591 Optical Interface Type MIB September 2003

   of the trace message."
::= { optIfODUkTConfigEntry 6 }

optIfODUkTTIMDetMode OBJECT-TYPE

SYNTAX  OptIfTIMDetMode
MAX-ACCESS  read-create
STATUS  current
DESCRIPTION
  "Indicates the mode of the Trace Identifier Mismatch (TIM)
   Detection function.
   This object is applicable only to the following three cases.
     (i) optIfODUkDirectionality has the value bidirectional(3), or
     (ii) optIfODUkDirectionality has the value sink(1) and
          optIfODUkTCodirectional has the value true(1), or
     (iii) optIfODUkDirectionality has the value source(3) and
           optIfODUkTCodirectional has the value false(2).
   It must not be instantiated in rows for all other cases.
   The default value of this object is off(1)."
::= { optIfODUkTConfigEntry 7 }

optIfODUkTTIMActEnabled OBJECT-TYPE

SYNTAX  TruthValue
MAX-ACCESS  read-create
STATUS  current
DESCRIPTION
  "Indicates whether the Trace Identifier Mismatch (TIM)
   Consequent Action function is enabled.
   This object is applicable only to the following three cases.
     (i) optIfODUkDirectionality has the value bidirectional(3), or
     (ii) optIfODUkDirectionality has the value sink(1) and
          optIfODUkTCodirectional has the value true(1), or
     (iii) optIfODUkDirectionality has the value source(3) and
           optIfODUkTCodirectional has the value false(2).
   It must not be instantiated in rows for all other cases.
   This object has no effect when optIfODUkTTIMDetMode has
   the value off(1).
   The default value of this object is false(2)."
::= { optIfODUkTConfigEntry 8 }

optIfODUkTDEGThr OBJECT-TYPE

SYNTAX  OptIfDEGThr
UNITS   "percentage"
MAX-ACCESS  read-create
STATUS  current
DESCRIPTION
  "Indicates the threshold level for declaring a performance
   monitoring (PM) Second to be bad.  A PM Second is declared bad if
   the percentage of detected errored blocks in that second is

Lam, et al. Standards Track [Page 137] RFC 3591 Optical Interface Type MIB September 2003

   greater than or equal to optIfODUkTDEGThr.
   This object is applicable only to the following three cases.
     (i) optIfODUkDirectionality has the value bidirectional(3), or
     (ii) optIfODUkDirectionality has the value sink(1) and
          optIfODUkTCodirectional has the value true(1), or
     (iii) optIfODUkDirectionality has the value source(3) and
           optIfODUkTCodirectional has the value false(2).
   It must not be instantiated in rows for all other cases.
   The default value of this object is Severely Errored Second
   (SES) Estimator (See ITU-T G.7710)."
::= { optIfODUkTConfigEntry 9 }

optIfODUkTDEGM OBJECT-TYPE

SYNTAX  OptIfDEGM
MAX-ACCESS  read-create
STATUS  current
DESCRIPTION
  "Indicates the threshold level for declaring a Degraded Signal
   defect (dDEG).  A dDEG shall be declared if optIfODUkTDEGM
   consecutive bad PM Seconds are detected.
   This object is applicable only to the following three cases.
     (i) optIfODUkDirectionality has the value bidirectional(3), or
     (ii) optIfODUkDirectionality has the value sink(1) and
          optIfODUkTCodirectional has the value true(1), or
     (iii) optIfODUkDirectionality has the value source(3) and
           optIfODUkTCodirectional has the value false(2).
   It must not be instantiated in rows for all other cases.
   The default value of this object is 7 (See ITU-T G.7710)."
::= { optIfODUkTConfigEntry 10 }

optIfODUkTSinkMode OBJECT-TYPE

SYNTAX  INTEGER  {
  operational (1),
  monitor (2)
  }
MAX-ACCESS  read-create
STATUS      current
DESCRIPTION
  "This variable specifies the TCM mode at the entity.
   The value operational(1) means that TCM Overhead (TCMOH)
   processes (see ITU-T G.798) shall be
   performed and consequent actions for AIS, Trail
   Signal Fail (TSF), Trail Signal Degraded (TSD) shall be
   initiated in case of defects.
   The value monitor(2) means that TCMOH processes shall be
   performed but consequent actions for AIS, Trail
   Server Failure (TSF), Trail Server Degraded (TSD) shall _not_ be
   initiated in case of defects.

Lam, et al. Standards Track [Page 138] RFC 3591 Optical Interface Type MIB September 2003

   This object is applicable only when the value of
   optIfODUkTtpPresent is false(2) and also either one of the
   following three cases holds:
     (i) optIfODUkDirectionality has the value bidirectional(3), or
     (ii) optIfODUkDirectionality has the value sink(1) and
          optIfODUkTCodirectional has the value true(1), or
     (iii) optIfODUkDirectionality has the value source(3) and
           optIfODUkTCodirectional has the value false(2).
   It must not be instantiated in rows for all other cases."
::= { optIfODUkTConfigEntry 11 }

optIfODUkTSinkLockSignalAdminState OBJECT-TYPE

SYNTAX  INTEGER {
  locked(1),
  normal(2)
  }
MAX-ACCESS  read-create
STATUS  current
DESCRIPTION
  "Provides the capability to provision the LOCK signal, which
   is one of the ODUk maintenance signals, at the ODUKT sink.  When
   a Tandem Connection endpoint is set to admin state locked,
   it inserts the ODUk-LCK signal in the sink direction.
   This object is applicable only when the value of
   optIfODUkTtpPresent is false(2) and also either one of the
   following three cases holds:
     (i) optIfODUkDirectionality has the value bidirectional(3), or
     (ii) optIfODUkDirectionality has the value sink(1) and
          optIfODUkTCodirectional has the value true(1), or
     (iii) optIfODUkDirectionality has the value source(3) and
           optIfODUkTCodirectional has the value false(2).
   It must not be instantiated in rows for all other cases."
::= { optIfODUkTConfigEntry 12 }

optIfODUkTSourceLockSignalAdminState OBJECT-TYPE

SYNTAX  INTEGER {
  locked(1),
  normal(2)
  }
MAX-ACCESS  read-create
STATUS  current
DESCRIPTION
  "Provides the capability to provision the LOCK signal, which
   is one of the ODUk maintenance signals, at the source.
   When a Tandem Connection endpoint is set to admin state
   locked, it inserts the ODUk-LCK signal in the source
   direction.

Lam, et al. Standards Track [Page 139] RFC 3591 Optical Interface Type MIB September 2003

   This object is applicable only when either one of the
   following three cases holds:
     (i) optIfODUkDirectionality has the value bidirectional(3), or
     (ii) optIfODUkDirectionality has the value sink(1) and
          optIfODUkTCodirectional has the value false(2), or
     (iii) optIfODUkDirectionality has the value source(3) and
           optIfODUkTCodirectional has the value true(1).
   It must not be instantiated in rows for all other cases."
::= { optIfODUkTConfigEntry 13 }

optIfODUkTCurrentStatus OBJECT-TYPE

SYNTAX  BITS {
  oci(0),
  lck(1),
  tim(2),
  deg(3),
  bdi(4),
  ssf(5)
  }
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "Indicates the defect condition of the entity, if any.
   This object is applicable only when either one of the
   following three cases holds:
     (i) optIfODUkDirectionality has the value bidirectional(3), or
     (ii) optIfODUkDirectionality has the value sink(1) and
          optIfODUkTCodirectional has the value true(1), or
     (iii) optIfODUkDirectionality has the value source(3) and
           optIfODUkTCodirectional has the value false(2).
   It must not be instantiated in rows for all other cases."
::= { optIfODUkTConfigEntry 14 }

optIfODUkTRowStatus OBJECT-TYPE

SYNTAX  RowStatus
MAX-ACCESS  read-create
STATUS  current
DESCRIPTION
  "This columnar object is used for creating and deleting a
   conceptual row of the optIfODUkT config table.
   It is used to model the addTCM and removeTCM operations of an
   ODUk_CTP or ODUk_TTP for Tandem connection monitoring as defined
   in ITU-T G.874.1.
   Setting RowStatus to createAndGo or createAndWait implies addTCM.
   Setting RowStatus to destroy implies removeTCM.
   Successful addition/removal of TCM will result in updating the
   optIfODUkTcmFieldsInUse and optIfODUkPositionSeqCurrentSize
   variables and the optIfODUkPositionSeqTable table of the

Lam, et al. Standards Track [Page 140] RFC 3591 Optical Interface Type MIB September 2003

   associated ODUk entry in the optIfODUkConfigTable."
::= { optIfODUkTConfigEntry 15 }

– ODUkT Non-intrusive monitoring (Nim) config table

optIfODUkTNimConfigTable OBJECT-TYPE

SYNTAX  SEQUENCE OF OptIfODUkTNimConfigEntry
MAX-ACCESS  not-accessible
STATUS  current
DESCRIPTION
  "A table of ODUkTNim configuration information."
::= { optIfODUkT 2 }

optIfODUkTNimConfigEntry OBJECT-TYPE

SYNTAX  OptIfODUkTNimConfigEntry
MAX-ACCESS  not-accessible
STATUS  current
DESCRIPTION
  "A conceptual row that contains ODUkTNim configuration
   information of an interface.  Each instance must
   correspond to an instance of optIfODUkConfigEntry.
   Rows in this table are mutually exclusive with rows
   in the ODUkT config table -- in other words, this
   row object may not be instantiated for a given pair
   of ifIndex and TCM field values if a corresponding
   instance of optIfODUkTConfigEntry already exists.
   Instances of this conceptual row persist across
   agent restarts, and read-create columns other
   than the status column may be modified while the
   row is active."
INDEX  {ifIndex, optIfODUkTNimTcmField, optIfODUkTNimDirectionality}
::= { optIfODUkTNimConfigTable 1 }

OptIfODUkTNimConfigEntry ::=

SEQUENCE {
  optIfODUkTNimTcmField                    Unsigned32,
  optIfODUkTNimDirectionality              OptIfSinkOrSource,
  optIfODUkTNimDAPIExpected                OptIfExDAPI,
  optIfODUkTNimSAPIExpected                OptIfExSAPI,
  optIfODUkTNimTraceIdentifierAccepted     OptIfAcTI,
  optIfODUkTNimTIMDetMode                  OptIfTIMDetMode,
  optIfODUkTNimTIMActEnabled               TruthValue,
  optIfODUkTNimDEGThr                      OptIfDEGThr,
  optIfODUkTNimDEGM                        OptIfDEGM,
  optIfODUkTNimCurrentStatus               BITS,
  optIfODUkTNimRowStatus                   RowStatus
  }

Lam, et al. Standards Track [Page 141] RFC 3591 Optical Interface Type MIB September 2003

optIfODUkTNimTcmField OBJECT-TYPE

SYNTAX  Unsigned32 (1..6)
MAX-ACCESS  not-accessible
STATUS  current
DESCRIPTION
  "Indicates the tandem connection monitoring
   field of the ODUk OH on which non-intrusive monitoring
   is performed.  Valid values are
   integers from 1 to 6."
::= { optIfODUkTNimConfigEntry 1 }

optIfODUkTNimDirectionality OBJECT-TYPE

SYNTAX  OptIfSinkOrSource
MAX-ACCESS  not-accessible
STATUS  current
DESCRIPTION
  "Specifies the monitor point for the ODUk TCM non-intrusive
   monitoring function.  The value source(2) is not allowed
   if the corresponding instance of optIfODUkDirectionality
   has the value sink(1), and the value sink(1) is not allowed
   if the corresponding instance of optIfODUkDirectionality
   has the value source(2).  Either the value sink(1) or
   source(2) is allowed if the corresponding instance of
   optIfODUkDirectionality has the value bidirectional(3).
   The value sink(1) means monitoring at the sink direction
   TCM signal of the ODUk CTP.
   The value source(2) means monitoring at the source direction
   path signal of the ODUk CTP."
::= { optIfODUkTNimConfigEntry 2 }

optIfODUkTNimDAPIExpected OBJECT-TYPE

SYNTAX  OptIfExDAPI
MAX-ACCESS  read-create
STATUS  current
DESCRIPTION
  "The DAPI expected by the receiver.
   This object has no effect if optIfODUkTNimTIMDetMode has
   the value off(1) or sapi(3)."
::= { optIfODUkTNimConfigEntry 3 }

optIfODUkTNimSAPIExpected OBJECT-TYPE

SYNTAX  OptIfExSAPI
MAX-ACCESS  read-create
STATUS  current
DESCRIPTION
  "The SAPI expected by the receiver.
   This object has no effect if optIfODUkTNimTIMDetMode has
   the value off(1) or dapi(2)."

Lam, et al. Standards Track [Page 142] RFC 3591 Optical Interface Type MIB September 2003

::= { optIfODUkTNimConfigEntry 4 }

optIfODUkTNimTraceIdentifierAccepted OBJECT-TYPE

SYNTAX  OptIfAcTI
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "The actual trace identifier accepted.  The value of
   this object is unspecified if optIfODUkTNimCurrentStatus
   has any of the bit positions oci(0), lck(1), or ssf(5)
   set or if optIfODUkTNimRowStatus has any value other
   than active(1)."
::= { optIfODUkTNimConfigEntry 5 }

optIfODUkTNimTIMDetMode OBJECT-TYPE

SYNTAX  OptIfTIMDetMode
MAX-ACCESS  read-create
STATUS  current
DESCRIPTION
  "Indicates the mode of the Trace Identifier Mismatch (TIM)
   Detection function."
::= { optIfODUkTNimConfigEntry 6 }

optIfODUkTNimTIMActEnabled OBJECT-TYPE

SYNTAX  TruthValue
MAX-ACCESS  read-create
STATUS  current
DESCRIPTION
  "Indicates whether the Trace Identifier Mismatch (TIM)
   Consequent Action function is enabled."
::= { optIfODUkTNimConfigEntry 7 }

optIfODUkTNimDEGThr OBJECT-TYPE

SYNTAX  OptIfDEGThr
UNITS   "percentage"
MAX-ACCESS  read-create
STATUS  current
DESCRIPTION
  "Indicates the threshold level for declaring a performance
   monitoring (PM) Second to be bad.  A PM Second is declared bad if
   the percentage of detected errored blocks in that second is
   greater than or equal to optIfODUkTNimDEGThr."
::= { optIfODUkTNimConfigEntry 8 }

optIfODUkTNimDEGM OBJECT-TYPE

SYNTAX  OptIfDEGM
MAX-ACCESS  read-create
STATUS  current

Lam, et al. Standards Track [Page 143] RFC 3591 Optical Interface Type MIB September 2003

DESCRIPTION
  "Indicates the threshold level for declaring a Degraded Signal
   defect (dDEG).  A dDEG shall be declared if optIfODUkTNimDEGM
   consecutive bad PM Seconds are detected."
::= { optIfODUkTNimConfigEntry 9 }

optIfODUkTNimCurrentStatus OBJECT-TYPE

SYNTAX  BITS {
  oci(0),
  lck(1),
  tim(2),
  deg(3),
  bdi(4),
  ssf(5)
  }
MAX-ACCESS  read-only
STATUS  current
DESCRIPTION
  "Indicates the defect condition of the entity, if any.
   The value of this object is unspecified if
   optIfODUkTNimRowStatus has any value other than
   active(1)."
::= { optIfODUkTNimConfigEntry 10 }

optIfODUkTNimRowStatus OBJECT-TYPE

SYNTAX  RowStatus
MAX-ACCESS  read-create
STATUS  current
DESCRIPTION
  "This columnar object is used for creating and deleting a
   conceptual row of the optIfODUkTNim config table.
   It is used to model the addTCM and removeTCM operations of an
   ODUk_CTP or ODUk_TTP for non-intrusive Tandem connection
   monitoring as defined in ITU-T G.874.1.
   Setting RowStatus to createAndGo or createAndWait implies addTCM.
   Setting RowStatus to destroy implies removeTCM.
   Successful addition/removal of Nim TCM will result in updating
   the optIfODUkPositionSeqCurrentSize variable and the
   optIfODUkPositionSeqTable table of the associated ODUk entry
   in the optIfODUkConfigTable."
::= { optIfODUkTNimConfigEntry 11 }

– units of conformance

optIfOTMnGroup OBJECT-GROUP

OBJECTS  {
  optIfOTMnOrder,
  optIfOTMnReduced,

Lam, et al. Standards Track [Page 144] RFC 3591 Optical Interface Type MIB September 2003

  optIfOTMnBitRates,
  optIfOTMnInterfaceType,
  optIfOTMnTcmMax,
  optIfOTMnOpticalReach
  }
STATUS  current
DESCRIPTION
  "A collection of OTMn structure information objects."
::= { optIfGroups 1 }

optIfPerfMonGroup OBJECT-GROUP

OBJECTS  {
  optIfPerfMonCurrentTimeElapsed,
  optIfPerfMonCurDayTimeElapsed,
  optIfPerfMonIntervalNumIntervals,
  optIfPerfMonIntervalNumInvalidIntervals
  }
STATUS  current
DESCRIPTION
  "A collection of performance monitoring interval objects."
::= { optIfGroups 2 }

optIfOTSnCommonGroup OBJECT-GROUP

OBJECTS  {
  optIfOTSnDirectionality
  }
STATUS  current
DESCRIPTION
  "A collection of configuration objects
   applicable to all OTSn interfaces."
::= { optIfGroups 3 }

optIfOTSnSourceGroupFull OBJECT-GROUP

OBJECTS  {
  optIfOTSnTraceIdentifierTransmitted
  }
STATUS  current
DESCRIPTION
  "A collection of configuration objects
   applicable to full-functionality/IaDI OTSn
   interfaces that support source functions."
::= { optIfGroups 4 }

optIfOTSnAPRStatusGroup OBJECT-GROUP

OBJECTS  {
  optIfOTSnAprStatus
  }
STATUS  current

Lam, et al. Standards Track [Page 145] RFC 3591 Optical Interface Type MIB September 2003

DESCRIPTION
  "A collection of objects applicable to
   OTSn interfaces that support Automatic
   Power Reduction functions."
::= { optIfGroups 5 }

optIfOTSnAPRControlGroup OBJECT-GROUP

OBJECTS  {
  optIfOTSnAprControl
  }
STATUS  current
DESCRIPTION
  "A collection of objects applicable to
   OTSn interfaces that provide Automatic
   Power Reduction control functions."
::= { optIfGroups 6 }

optIfOTSnSinkGroupBasic OBJECT-GROUP

OBJECTS  {
  optIfOTSnCurrentStatus
  }
STATUS  current
DESCRIPTION
  "A collection of configuration objects
   applicable to all OTSn interfaces that
   support sink functions."
::= { optIfGroups 7 }

optIfOTSnSinkGroupFull OBJECT-GROUP

OBJECTS  {
  optIfOTSnDAPIExpected,
  optIfOTSnSAPIExpected,
  optIfOTSnTraceIdentifierAccepted,
  optIfOTSnTIMDetMode,
  optIfOTSnTIMActEnabled
  }
STATUS  current
DESCRIPTION
  "A collection of configuration objects
   applicable to full-functionality/IaDI OTSn
   interfaces that support sink functions."
::= { optIfGroups 8 }

optIfOTSnSinkPreOtnPMGroup OBJECT-GROUP

OBJECTS  {
  optIfOTSnSinkCurrentSuspectedFlag,
  optIfOTSnSinkCurrentInputPower,
  optIfOTSnSinkCurrentLowInputPower,

Lam, et al. Standards Track [Page 146] RFC 3591 Optical Interface Type MIB September 2003

  optIfOTSnSinkCurrentHighInputPower,
  optIfOTSnSinkCurrentOutputPower,
  optIfOTSnSinkCurrentLowOutputPower,
  optIfOTSnSinkCurrentHighOutputPower,
  optIfOTSnSinkIntervalSuspectedFlag,
  optIfOTSnSinkIntervalLastInputPower,
  optIfOTSnSinkIntervalLowInputPower,
  optIfOTSnSinkIntervalHighInputPower,
  optIfOTSnSinkIntervalLastOutputPower,
  optIfOTSnSinkIntervalLowOutputPower,
  optIfOTSnSinkIntervalHighOutputPower,
  optIfOTSnSinkCurDaySuspectedFlag,
  optIfOTSnSinkCurDayLowInputPower,
  optIfOTSnSinkCurDayHighInputPower,
  optIfOTSnSinkCurDayLowOutputPower,
  optIfOTSnSinkCurDayHighOutputPower,
  optIfOTSnSinkPrevDaySuspectedFlag,
  optIfOTSnSinkPrevDayLastInputPower,
  optIfOTSnSinkPrevDayLowInputPower,
  optIfOTSnSinkPrevDayHighInputPower,
  optIfOTSnSinkPrevDayLastOutputPower,
  optIfOTSnSinkPrevDayLowOutputPower,
  optIfOTSnSinkPrevDayHighOutputPower
  }
STATUS  current
DESCRIPTION
  "A collection of pre-OTN performance monitoring
   objects applicable to OTSn interfaces that
   support sink functions."
::= { optIfGroups 9 }

optIfOTSnSinkPreOtnPMThresholdGroup OBJECT-GROUP

OBJECTS  {
  optIfOTSnSinkCurrentLowerInputPowerThreshold,
  optIfOTSnSinkCurrentUpperInputPowerThreshold,
  optIfOTSnSinkCurrentLowerOutputPowerThreshold,
  optIfOTSnSinkCurrentUpperOutputPowerThreshold
  }
STATUS  current
DESCRIPTION
  "A collection of pre-OTN performance monitoring
   threshold objects applicable to OTSn interfaces
   that support sink functions."
::= { optIfGroups 10 }

optIfOTSnSourcePreOtnPMGroup OBJECT-GROUP

OBJECTS  {
  optIfOTSnSrcCurrentSuspectedFlag,

Lam, et al. Standards Track [Page 147] RFC 3591 Optical Interface Type MIB September 2003

  optIfOTSnSrcCurrentOutputPower,
  optIfOTSnSrcCurrentLowOutputPower,
  optIfOTSnSrcCurrentHighOutputPower,
  optIfOTSnSrcCurrentInputPower,
  optIfOTSnSrcCurrentLowInputPower,
  optIfOTSnSrcCurrentHighInputPower,
  optIfOTSnSrcIntervalSuspectedFlag,
  optIfOTSnSrcIntervalLastOutputPower,
  optIfOTSnSrcIntervalLowOutputPower,
  optIfOTSnSrcIntervalHighOutputPower,
  optIfOTSnSrcIntervalLastInputPower,
  optIfOTSnSrcIntervalLowInputPower,
  optIfOTSnSrcIntervalHighInputPower,
  optIfOTSnSrcCurDaySuspectedFlag,
  optIfOTSnSrcCurDayLowOutputPower,
  optIfOTSnSrcCurDayHighOutputPower,
  optIfOTSnSrcCurDayLowInputPower,
  optIfOTSnSrcCurDayHighInputPower,
  optIfOTSnSrcPrevDaySuspectedFlag,
  optIfOTSnSrcPrevDayLastOutputPower,
  optIfOTSnSrcPrevDayLowOutputPower,
  optIfOTSnSrcPrevDayHighOutputPower,
  optIfOTSnSrcPrevDayLastInputPower,
  optIfOTSnSrcPrevDayLowInputPower,
  optIfOTSnSrcPrevDayHighInputPower
  }
STATUS  current
DESCRIPTION
  "A collection of pre-OTN performance monitoring
   objects applicable to OTSn interfaces that
   support source functions."
::= { optIfGroups 11 }

optIfOTSnSourcePreOtnPMThresholdGroup OBJECT-GROUP

OBJECTS  {
  optIfOTSnSrcCurrentLowerOutputPowerThreshold,
  optIfOTSnSrcCurrentUpperOutputPowerThreshold,
  optIfOTSnSrcCurrentLowerInputPowerThreshold,
  optIfOTSnSrcCurrentUpperInputPowerThreshold
  }
STATUS  current
DESCRIPTION
  "A collection of pre-OTN performance monitoring
   threshold objects applicable to OTSn interfaces
   that support source functions."
::= { optIfGroups 12 }

optIfOMSnCommonGroup OBJECT-GROUP

Lam, et al. Standards Track [Page 148] RFC 3591 Optical Interface Type MIB September 2003

OBJECTS  {
  optIfOMSnDirectionality
  }
STATUS  current
DESCRIPTION
  "A collection of configuration objects
   applicable to all OMSn interfaces."
::= { optIfGroups 13 }

optIfOMSnSinkGroupBasic OBJECT-GROUP

OBJECTS  {
  optIfOMSnCurrentStatus
  }
STATUS  current
DESCRIPTION
  "A collection of configuration objects
   applicable to all OMSn interfaces that
   support sink functions."
::= { optIfGroups 14 }

optIfOMSnSinkPreOtnPMGroup OBJECT-GROUP

OBJECTS  {
  optIfOMSnSinkCurrentSuspectedFlag,
  optIfOMSnSinkCurrentAggregatedInputPower,
  optIfOMSnSinkCurrentLowAggregatedInputPower,
  optIfOMSnSinkCurrentHighAggregatedInputPower,
  optIfOMSnSinkCurrentOutputPower,
  optIfOMSnSinkCurrentLowOutputPower,
  optIfOMSnSinkCurrentHighOutputPower,
  optIfOMSnSinkIntervalSuspectedFlag,
  optIfOMSnSinkIntervalLastAggregatedInputPower,
  optIfOMSnSinkIntervalLowAggregatedInputPower,
  optIfOMSnSinkIntervalHighAggregatedInputPower,
  optIfOMSnSinkIntervalLastOutputPower,
  optIfOMSnSinkIntervalLowOutputPower,
  optIfOMSnSinkIntervalHighOutputPower,
  optIfOMSnSinkCurDaySuspectedFlag,
  optIfOMSnSinkCurDayLowAggregatedInputPower,
  optIfOMSnSinkCurDayHighAggregatedInputPower,
  optIfOMSnSinkCurDayLowOutputPower,
  optIfOMSnSinkCurDayHighOutputPower,
  optIfOMSnSinkPrevDaySuspectedFlag,
  optIfOMSnSinkPrevDayLastAggregatedInputPower,
  optIfOMSnSinkPrevDayLowAggregatedInputPower,
  optIfOMSnSinkPrevDayHighAggregatedInputPower,
  optIfOMSnSinkPrevDayLastOutputPower,
  optIfOMSnSinkPrevDayLowOutputPower,
  optIfOMSnSinkPrevDayHighOutputPower

Lam, et al. Standards Track [Page 149] RFC 3591 Optical Interface Type MIB September 2003

  }
STATUS  current
DESCRIPTION
  "A collection of pre-OTN performance monitoring
   objects applicable to OMSn interfaces that
   support sink functions."
::= { optIfGroups 15 }

optIfOMSnSinkPreOtnPMThresholdGroup OBJECT-GROUP

OBJECTS  {
  optIfOMSnSinkCurrentLowerInputPowerThreshold,
  optIfOMSnSinkCurrentUpperInputPowerThreshold,
  optIfOMSnSinkCurrentLowerOutputPowerThreshold,
  optIfOMSnSinkCurrentUpperOutputPowerThreshold
  }
STATUS  current
DESCRIPTION
  "A collection of pre-OTN performance monitoring
   threshold objects applicable to OMSn interfaces
   that support sink functions."
::= { optIfGroups 16 }

optIfOMSnSourcePreOtnPMGroup OBJECT-GROUP

OBJECTS  {
  optIfOMSnSrcCurrentSuspectedFlag,
  optIfOMSnSrcCurrentOutputPower,
  optIfOMSnSrcCurrentLowOutputPower,
  optIfOMSnSrcCurrentHighOutputPower,
  optIfOMSnSrcCurrentAggregatedInputPower,
  optIfOMSnSrcCurrentLowAggregatedInputPower,
  optIfOMSnSrcCurrentHighAggregatedInputPower,
  optIfOMSnSrcIntervalSuspectedFlag,
  optIfOMSnSrcIntervalLastOutputPower,
  optIfOMSnSrcIntervalLowOutputPower,
  optIfOMSnSrcIntervalHighOutputPower,
  optIfOMSnSrcIntervalLastAggregatedInputPower,
  optIfOMSnSrcIntervalLowAggregatedInputPower,
  optIfOMSnSrcIntervalHighAggregatedInputPower,
  optIfOMSnSrcCurDaySuspectedFlag,
  optIfOMSnSrcCurDayLowOutputPower,
  optIfOMSnSrcCurDayHighOutputPower,
  optIfOMSnSrcCurDayLowAggregatedInputPower,
  optIfOMSnSrcCurDayHighAggregatedInputPower,
  optIfOMSnSrcPrevDaySuspectedFlag,
  optIfOMSnSrcPrevDayLastOutputPower,
  optIfOMSnSrcPrevDayLowOutputPower,
  optIfOMSnSrcPrevDayHighOutputPower,
  optIfOMSnSrcPrevDayLastAggregatedInputPower,

Lam, et al. Standards Track [Page 150] RFC 3591 Optical Interface Type MIB September 2003

  optIfOMSnSrcPrevDayLowAggregatedInputPower,
  optIfOMSnSrcPrevDayHighAggregatedInputPower
  }
STATUS  current
DESCRIPTION
  "A collection of pre-OTN performance monitoring
   objects applicable to OMSn interfaces that
   support source functions."
::= { optIfGroups 17 }

optIfOMSnSourcePreOtnPMThresholdGroup OBJECT-GROUP

OBJECTS  {
  optIfOMSnSrcCurrentLowerOutputPowerThreshold,
  optIfOMSnSrcCurrentUpperOutputPowerThreshold,
  optIfOMSnSrcCurrentLowerInputPowerThreshold,
  optIfOMSnSrcCurrentUpperInputPowerThreshold
  }
STATUS  current
DESCRIPTION
  "A collection of pre-OTN performance monitoring
   threshold objects applicable to OMSn interfaces that
   that support source functions."
::= { optIfGroups 18 }

optIfOChGroupCommonGroup OBJECT-GROUP

OBJECTS  {
  optIfOChGroupDirectionality
  }
STATUS  current
DESCRIPTION
  "A collection of configuration objects
   applicable to all OChGroup interfaces."
::= { optIfGroups 19 }

optIfOChGroupSinkPreOtnPMGroup OBJECT-GROUP

OBJECTS  {
  optIfOChGroupSinkCurrentSuspectedFlag,
  optIfOChGroupSinkCurrentAggregatedInputPower,
  optIfOChGroupSinkCurrentLowAggregatedInputPower,
  optIfOChGroupSinkCurrentHighAggregatedInputPower,
  optIfOChGroupSinkCurrentOutputPower,
  optIfOChGroupSinkCurrentLowOutputPower,
  optIfOChGroupSinkCurrentHighOutputPower,
  optIfOChGroupSinkIntervalSuspectedFlag,
  optIfOChGroupSinkIntervalLastAggregatedInputPower,
  optIfOChGroupSinkIntervalLowAggregatedInputPower,
  optIfOChGroupSinkIntervalHighAggregatedInputPower,
  optIfOChGroupSinkIntervalLastOutputPower,

Lam, et al. Standards Track [Page 151] RFC 3591 Optical Interface Type MIB September 2003

  optIfOChGroupSinkIntervalLowOutputPower,
  optIfOChGroupSinkIntervalHighOutputPower,
  optIfOChGroupSinkCurDaySuspectedFlag,
  optIfOChGroupSinkCurDayLowAggregatedInputPower,
  optIfOChGroupSinkCurDayHighAggregatedInputPower,
  optIfOChGroupSinkCurDayLowOutputPower,
  optIfOChGroupSinkCurDayHighOutputPower,
  optIfOChGroupSinkPrevDaySuspectedFlag,
  optIfOChGroupSinkPrevDayLastAggregatedInputPower,
  optIfOChGroupSinkPrevDayLowAggregatedInputPower,
  optIfOChGroupSinkPrevDayHighAggregatedInputPower,
  optIfOChGroupSinkPrevDayLastOutputPower,
  optIfOChGroupSinkPrevDayLowOutputPower,
  optIfOChGroupSinkPrevDayHighOutputPower
  }
STATUS  current
DESCRIPTION
  "A collection of pre-OTN performance monitoring
   objects applicable to OChGroup interfaces that
   support sink functions."
::= { optIfGroups 20 }

optIfOChGroupSinkPreOtnPMThresholdGroup OBJECT-GROUP

OBJECTS  {
  optIfOChGroupSinkCurrentLowerInputPowerThreshold,
  optIfOChGroupSinkCurrentUpperInputPowerThreshold,
  optIfOChGroupSinkCurrentLowerOutputPowerThreshold,
  optIfOChGroupSinkCurrentUpperOutputPowerThreshold
  }
STATUS  current
DESCRIPTION
  "A collection of pre-OTN performance monitoring
   threshold objects applicable to OChGroup interfaces
   that support sink functions."
::= { optIfGroups 21 }

optIfOChGroupSourcePreOtnPMGroup OBJECT-GROUP

OBJECTS  {
  optIfOChGroupSrcCurrentSuspectedFlag,
  optIfOChGroupSrcCurrentOutputPower,
  optIfOChGroupSrcCurrentLowOutputPower,
  optIfOChGroupSrcCurrentHighOutputPower,
  optIfOChGroupSrcCurrentAggregatedInputPower,
  optIfOChGroupSrcCurrentLowAggregatedInputPower,
  optIfOChGroupSrcCurrentHighAggregatedInputPower,
  optIfOChGroupSrcIntervalSuspectedFlag,
  optIfOChGroupSrcIntervalLastOutputPower,
  optIfOChGroupSrcIntervalLowOutputPower,

Lam, et al. Standards Track [Page 152] RFC 3591 Optical Interface Type MIB September 2003

  optIfOChGroupSrcIntervalHighOutputPower,
  optIfOChGroupSrcIntervalLastAggregatedInputPower,
  optIfOChGroupSrcIntervalLowAggregatedInputPower,
  optIfOChGroupSrcIntervalHighAggregatedInputPower,
  optIfOChGroupSrcCurDaySuspectedFlag,
  optIfOChGroupSrcCurDayLowOutputPower,
  optIfOChGroupSrcCurDayHighOutputPower,
  optIfOChGroupSrcCurDayLowAggregatedInputPower,
  optIfOChGroupSrcCurDayHighAggregatedInputPower,
  optIfOChGroupSrcPrevDaySuspectedFlag,
  optIfOChGroupSrcPrevDayLastOutputPower,
  optIfOChGroupSrcPrevDayLowOutputPower,
  optIfOChGroupSrcPrevDayHighOutputPower,
  optIfOChGroupSrcPrevDayLastAggregatedInputPower,
  optIfOChGroupSrcPrevDayLowAggregatedInputPower,
  optIfOChGroupSrcPrevDayHighAggregatedInputPower
  }
STATUS  current
DESCRIPTION
  "A collection of pre-OTN performance monitoring
   objects applicable to OChGroup interfaces that
   support source functions."
::= { optIfGroups 22 }

optIfOChGroupSourcePreOtnPMThresholdGroup OBJECT-GROUP

OBJECTS  {
  optIfOChGroupSrcCurrentLowerOutputPowerThreshold,
  optIfOChGroupSrcCurrentUpperOutputPowerThreshold,
  optIfOChGroupSrcCurrentLowerInputPowerThreshold,
  optIfOChGroupSrcCurrentUpperInputPowerThreshold
  }
STATUS  current
DESCRIPTION
  "A collection of pre-OTN performance monitoring
   threshold objects applicable to OChGroup interfaces that
   that support source functions."
::= { optIfGroups 23 }

optIfOChCommonGroup OBJECT-GROUP

OBJECTS  {
  optIfOChDirectionality
  }
STATUS  current
DESCRIPTION
  "A collection of configuration objects
   applicable to all OCh interfaces."
::= { optIfGroups 24 }

Lam, et al. Standards Track [Page 153] RFC 3591 Optical Interface Type MIB September 2003

optIfOChSinkGroupBasic OBJECT-GROUP

OBJECTS  {
  optIfOChCurrentStatus
  }
STATUS  current
DESCRIPTION
  "A collection of configuration objects
   applicable to all OCh interfaces that
   support sink functions."
::= { optIfGroups 25 }

optIfOChSinkPreOtnPMGroup OBJECT-GROUP

OBJECTS  {
  optIfOChSinkCurrentSuspectedFlag,
  optIfOChSinkCurrentInputPower,
  optIfOChSinkCurrentLowInputPower,
  optIfOChSinkCurrentHighInputPower,
  optIfOChSinkIntervalSuspectedFlag,
  optIfOChSinkIntervalLastInputPower,
  optIfOChSinkIntervalLowInputPower,
  optIfOChSinkIntervalHighInputPower,
  optIfOChSinkCurDaySuspectedFlag,
  optIfOChSinkCurDayLowInputPower,
  optIfOChSinkCurDayHighInputPower,
  optIfOChSinkPrevDaySuspectedFlag,
  optIfOChSinkPrevDayLastInputPower,
  optIfOChSinkPrevDayLowInputPower,
  optIfOChSinkPrevDayHighInputPower
   }
STATUS  current
DESCRIPTION
  "A collection of pre-OTN performance monitoring
   objects applicable to OCh interfaces that
   support sink functions."
::= { optIfGroups 26 }

optIfOChSinkPreOtnPMThresholdGroup OBJECT-GROUP

OBJECTS  {
  optIfOChSinkCurrentLowerInputPowerThreshold,
  optIfOChSinkCurrentUpperInputPowerThreshold
   }
STATUS  current
DESCRIPTION
  "A collection of pre-OTN performance monitoring
   threshold objects applicable to OCh interfaces
   that support sink functions."
::= { optIfGroups 27 }

Lam, et al. Standards Track [Page 154] RFC 3591 Optical Interface Type MIB September 2003

optIfOChSourcePreOtnPMGroup OBJECT-GROUP

OBJECTS  {
  optIfOChSrcCurrentSuspectedFlag,
  optIfOChSrcCurrentOutputPower,
  optIfOChSrcCurrentLowOutputPower,
  optIfOChSrcCurrentHighOutputPower,
  optIfOChSrcIntervalSuspectedFlag,
  optIfOChSrcIntervalLastOutputPower,
  optIfOChSrcIntervalLowOutputPower,
  optIfOChSrcIntervalHighOutputPower,
  optIfOChSrcCurDaySuspectedFlag,
  optIfOChSrcCurDayLowOutputPower,
  optIfOChSrcCurDayHighOutputPower,
  optIfOChSrcPrevDaySuspectedFlag,
  optIfOChSrcPrevDayLastOutputPower,
  optIfOChSrcPrevDayLowOutputPower,
  optIfOChSrcPrevDayHighOutputPower
   }
STATUS  current
DESCRIPTION
  "A collection of pre-OTN performance monitoring
   objects applicable to OCh interfaces that
   support source functions."
::= { optIfGroups 28 }

optIfOChSourcePreOtnPMThresholdGroup OBJECT-GROUP

OBJECTS  {
  optIfOChSrcCurrentLowerOutputPowerThreshold,
  optIfOChSrcCurrentUpperOutputPowerThreshold
   }
STATUS  current
DESCRIPTION
  "A collection of pre-OTN performance monitoring
   threshold objects applicable to OCh interfaces
   that support source functions."
::= { optIfGroups 29 }

optIfOTUkCommonGroup OBJECT-GROUP

OBJECTS  {
  optIfOTUkDirectionality,
  optIfOTUkBitRateK
  }
STATUS  current
DESCRIPTION
  "A collection of configuration objects
   applicable to all OTUk interfaces."
::= { optIfGroups 30 }

Lam, et al. Standards Track [Page 155] RFC 3591 Optical Interface Type MIB September 2003

optIfOTUkSourceGroup OBJECT-GROUP

OBJECTS  {
  optIfOTUkTraceIdentifierTransmitted,
  optIfOTUkSourceAdaptActive
  }
STATUS  current
DESCRIPTION
  "A collection of configuration objects
   applicable to OTUk interfaces that
   support source functions."
::= { optIfGroups 31 }

optIfOTUkSinkGroup OBJECT-GROUP

OBJECTS  {
  optIfOTUkDAPIExpected,
  optIfOTUkSAPIExpected,
  optIfOTUkTraceIdentifierAccepted,
  optIfOTUkTIMDetMode,
  optIfOTUkTIMActEnabled,
  optIfOTUkDEGThr,
  optIfOTUkDEGM,
  optIfOTUkSinkAdaptActive,
  optIfOTUkSinkFECEnabled,
  optIfOTUkCurrentStatus
  }
STATUS  current
DESCRIPTION
  "A collection of configuration objects
   applicable to OTUk interfaces that
   support sink functions."
::= { optIfGroups 32 }

optIfGCC0Group OBJECT-GROUP

OBJECTS  {
  optIfGCC0Application,
  optIfGCC0RowStatus
  }
STATUS  current
DESCRIPTION
  "A collection of GCC0 configuration objects."
::= { optIfGroups 33 }

optIfODUkGroup OBJECT-GROUP

OBJECTS  {
  optIfODUkDirectionality,
  optIfODUkBitRateK,
  optIfODUkTcmFieldsInUse,
  optIfODUkPositionSeqCurrentSize,

Lam, et al. Standards Track [Page 156] RFC 3591 Optical Interface Type MIB September 2003

  optIfODUkPositionSeqPosition,
  optIfODUkPositionSeqPointer,
  optIfODUkTtpPresent
  }
STATUS  current
DESCRIPTION
  "A collection of configuration objects
   applicable to all ODUk interfaces."
::= { optIfGroups 34 }

optIfODUkTtpSourceGroup OBJECT-GROUP

OBJECTS  {
  optIfODUkTtpTraceIdentifierTransmitted
  }
STATUS  current
DESCRIPTION
  "A collection of configuration objects
   applicable to all interfaces that support
   ODUk trail termination source functions."
::= { optIfGroups 35 }

optIfODUkTtpSinkGroup OBJECT-GROUP

OBJECTS  {
  optIfODUkTtpDAPIExpected,
  optIfODUkTtpSAPIExpected,
  optIfODUkTtpTraceIdentifierAccepted,
  optIfODUkTtpTIMDetMode,
  optIfODUkTtpTIMActEnabled,
  optIfODUkTtpDEGThr,
  optIfODUkTtpDEGM,
  optIfODUkTtpCurrentStatus
  }
STATUS  current
DESCRIPTION
  "A collection of ODUk configuration objects
   applicable to all interfaces that support
   ODUk trail termination sink functions."
::= { optIfGroups 36 }

optIfODUkNimGroup OBJECT-GROUP

OBJECTS  {
  optIfODUkNimDAPIExpected,
  optIfODUkNimSAPIExpected,
  optIfODUkNimTraceIdentifierAccepted,
  optIfODUkNimTIMDetMode,
  optIfODUkNimTIMActEnabled,
  optIfODUkNimDEGThr,
  optIfODUkNimDEGM,

Lam, et al. Standards Track [Page 157] RFC 3591 Optical Interface Type MIB September 2003

  optIfODUkNimCurrentStatus,
  optIfODUkNimRowStatus
  }
STATUS  current
DESCRIPTION
  "A collection of ODUk Nim configuration objects."
::= { optIfGroups 37 }

optIfGCC12Group OBJECT-GROUP

OBJECTS  {
  optIfGCC12GCCPassThrough,
  optIfGCC12Application,
  optIfGCC12RowStatus
  }
STATUS  current
DESCRIPTION
  "A collection of GCC12 configuration objects."
::= { optIfGroups 38 }

optIfODUkTCommonGroup OBJECT-GROUP

OBJECTS  {
  optIfODUkTRowStatus
  }
STATUS  current
DESCRIPTION
  "A collection of configuration objects
   applicable to all ODUkT instances."
::= { optIfGroups 39 }

optIfODUkTSourceGroup OBJECT-GROUP

OBJECTS  {
  optIfODUkTTraceIdentifierTransmitted,
  optIfODUkTSourceLockSignalAdminState
  }
STATUS  current
DESCRIPTION
  "A collection of configuration objects
   applicable to all ODUkT instances
   that provide source functions."
::= { optIfGroups 40 }

optIfODUkTSinkGroup OBJECT-GROUP

OBJECTS  {
  optIfODUkTDAPIExpected,
  optIfODUkTSAPIExpected,
  optIfODUkTTraceIdentifierAccepted,
  optIfODUkTTIMDetMode,
  optIfODUkTTIMActEnabled,

Lam, et al. Standards Track [Page 158] RFC 3591 Optical Interface Type MIB September 2003

  optIfODUkTDEGThr,
  optIfODUkTDEGM,
  optIfODUkTCurrentStatus
  }
STATUS  current
DESCRIPTION
  "A collection of configuration objects
   applicable to all ODUkT instances
   that provide sink functions."
::= { optIfGroups 41 }

optIfODUkTSinkGroupCtp OBJECT-GROUP

OBJECTS  {
  optIfODUkTSinkMode,
  optIfODUkTSinkLockSignalAdminState
  }
STATUS  current
DESCRIPTION
  "A collection of configuration objects
   applicable to ODUkT instances not
   colocated with an ODUk TTP that
   provide sink functions."
::= { optIfGroups 42 }

optIfODUkTNimGroup OBJECT-GROUP

OBJECTS  {
  optIfODUkTNimDAPIExpected,
  optIfODUkTNimSAPIExpected,
  optIfODUkTNimTraceIdentifierAccepted,
  optIfODUkTNimTIMDetMode,
  optIfODUkTNimTIMActEnabled,
  optIfODUkTNimDEGThr,
  optIfODUkTNimDEGM,
  optIfODUkTNimCurrentStatus,
  optIfODUkTNimRowStatus
  }
STATUS  current
DESCRIPTION
  "A collection of ODUkT Nim configuration objects."
::= { optIfGroups 43 }

– compliance specifications

optIfOtnConfigCompl MODULE-COMPLIANCE

STATUS  current
DESCRIPTION
  "Implementation requirements for the OTN configuration
   functions defined in this MIB module."

Lam, et al. Standards Track [Page 159] RFC 3591 Optical Interface Type MIB September 2003

MODULE -- this module
  MANDATORY-GROUPS  {
    optIfOTMnGroup,
    optIfOTSnCommonGroup
    }
  GROUP  optIfOTSnSourceGroupFull
  DESCRIPTION
    "This group is mandatory for interfaces of ifType
     opticalTransport(196) for which the corresponding
     instance of optIfOTSnDirectionality has the value
     source(2) or bidirectional(3), the corresponding
     instance of optIfOTMnReduced has the value false(2),
     and the corresponding instance of optIfOTMnInterfaceType
     specifies an OTMn interface type of 'IaDI'."
  GROUP  optIfOTSnAPRStatusGroup
  DESCRIPTION
    "This group is mandatory for interfaces of ifType
     opticalTransport(196) that support Automatic Power
     Reduction functions."
  GROUP  optIfOTSnAPRControlGroup
  DESCRIPTION
    "This group is optional, but is recommended for interfaces
     of ifType opticalTransport(196) that provide Automatic
     Power Reduction control functions."
  GROUP  optIfOTSnSinkGroupBasic
  DESCRIPTION
    "This group is mandatory for interfaces of ifType
     opticalTransport(196) for which the corresponding
     instance of optIfOTSnDirectionality has the value
     sink(1) or bidirectional(3)."
  GROUP  optIfOTSnSinkGroupFull
  DESCRIPTION
    "This group is mandatory for interfaces of ifType
     opticalTransport(196) for which the corresponding
     instance of optIfOTSnDirectionality has the value
     sink(1) or bidirectional(3), the corresponding
     instance of optIfOTMnReduced has the value false(2),
     and the corresponding instance of optIfOTMnInterfaceType
     specifies an OTMn interface type of 'IaDI'."
  GROUP  optIfOMSnCommonGroup
  DESCRIPTION

Lam, et al. Standards Track [Page 160] RFC 3591 Optical Interface Type MIB September 2003

    "This group is mandatory for interfaces of ifType
     opticalTransport(196) that support access to the OMS
     overhead information within the OTN Supervisory Channel."
  GROUP  optIfOMSnSinkGroupBasic
  DESCRIPTION
    "This group is mandatory for interfaces of ifType
     opticalTransport(196) that support access to the OMS Overhead
     information within the OSC (OTN Supervisory Channel)
     for which the corresponding
     instance of optIfOMSnDirectionality has the value
     sink(1) or bidirectional(3)."
  GROUP  optIfOChGroupCommonGroup
  DESCRIPTION
    "This group is mandatory for interfaces of ifType
     opticalChannelGroup(219)."
  GROUP  optIfOChCommonGroup
  DESCRIPTION
    "This group is mandatory for interfaces of ifType
     opticalTransport(195)."
  GROUP  optIfOChSinkGroupBasic
  DESCRIPTION
    "This group is mandatory for interfaces of ifType
     opticalChannel(195) for which the corresponding
     instance of optIfOChDirectionality has the value
     sink(1) or bidirectional(3)."
  GROUP  optIfOTUkCommonGroup
  DESCRIPTION
    "This group is mandatory for interfaces of ifType
     opticalChannel(195) that support OTUk layer functions."
  GROUP  optIfOTUkSourceGroup
  DESCRIPTION
    "This group is mandatory for interfaces of ifType
     opticalChannel(195) that support OTUk layer functions
     and for which the corresponding instance of
     optIfOTUkDirectionality has the value source(2) or
     bidirectional(3)."
  GROUP  optIfOTUkSinkGroup
  DESCRIPTION
    "This group is mandatory for interfaces of ifType
     opticalChannel(195) that support OTUk layer functions
     and for which the corresponding instance of

Lam, et al. Standards Track [Page 161] RFC 3591 Optical Interface Type MIB September 2003

     optIfOTUkDirectionality has the value sink(1) or
     bidirectional(3)."
  GROUP  optIfGCC0Group
  DESCRIPTION
    "This group is mandatory for interfaces of ifType
     opticalChannel(195) that support GCC0 access functions.
     It may be implemented only if the optIfOTUkCommonGroup
     is also implemented."
  GROUP  optIfODUkGroup
  DESCRIPTION
    "This group is mandatory for interfaces of ifType
     opticalChannel(195) that support ODUk layer functions."
  GROUP  optIfODUkTtpSourceGroup
  DESCRIPTION
    "This group is mandatory for interfaces of ifType
     opticalChannel(195) for which the corresponding
     instance of optIfODUkTtpPresent has the value
     true(1) and for which the corresponding instance of
     optIfODUkDirectionality has the value source(2) or
     bidirectional(3).  It may be implemented only if the
     optIfODUkGroup is also implemented."
  GROUP  optIfODUkTtpSinkGroup
  DESCRIPTION
    "This group is mandatory for interfaces of ifType
     opticalChannel(195) for which the corresponding
     instance of optIfODUkTtpPresent has the value
     true(1) and for which the corresponding instance of
     optIfODUkDirectionality has the value sink(1) or
     bidirectional(3).  It may be implemented only if the
     optIfODUkGroup is also implemented."
  GROUP  optIfODUkNimGroup
  DESCRIPTION
    "This group is mandatory for interfaces of ifType
     opticalChannel(195) for which the corresponding
     instance of optIfODUkTtpPresent has the value
     false(2).  It may be implemented only if the
     optIfODUkGroup is also implemented."
  GROUP  optIfGCC12Group
  DESCRIPTION
    "This group is mandatory for interfaces of ifType
     opticalChannel(195) that support GCC12 access functions.
     It may be implemented only if the optIfODUkGroup

Lam, et al. Standards Track [Page 162] RFC 3591 Optical Interface Type MIB September 2003

     is also implemented."
  GROUP  optIfODUkTCommonGroup
  DESCRIPTION
    "This group is mandatory for interfaces of ifType
     opticalChannel(195) that support intrusive
     tandem connection monitoring.  It may be implemented
     only if the optIfODUkGroup is also implemented."
  GROUP  optIfODUkTSourceGroup
  DESCRIPTION
    "This group is mandatory for interfaces of ifType
     opticalChannel(195) that support intrusive
     tandem connection monitoring and for which
     (i) optIfODUkDirectionality has the value bidirectional(3), or
     (ii) optIfODUkDirectionality has the value sink(1) and
          optIfODUkTCodirectional has the value false(2), or
     (iii) optIfODUkDirectionality has the value source(3) and
           optIfODUkTCodirectional has the value true(1).
     It may be implemented only if the optIfODUkGroup is
     also implemented."
  GROUP  optIfODUkTSinkGroup
  DESCRIPTION
    "This group is mandatory for interfaces of ifType
     opticalChannel(195) that support intrusive
     tandem connection monitoring and for which
     (i) optIfODUkDirectionality has the value bidirectional(3), or
     (ii) optIfODUkDirectionality has the value sink(1) and
          optIfODUkTCodirectional has the value true(1), or
     (iii) optIfODUkDirectionality has the value source(3) and
           optIfODUkTCodirectional has the value false(2).
     It may be implemented only if the optIfODUkGroup is
     also implemented."
  GROUP  optIfODUkTSinkGroupCtp
  DESCRIPTION
    "This group is mandatory for interfaces of ifType
     opticalChannel(195) that support intrusive
     tandem connection monitoring and for which
     optIfODUkTtpPresent is false(2) and
     (i) optIfODUkDirectionality has the value bidirectional(3), or
     (ii) optIfODUkDirectionality has the value sink(1) and
          optIfODUkTCodirectional has the value true(1), or
     (iii) optIfODUkDirectionality has the value source(3) and
           optIfODUkTCodirectional has the value false(2).
     It may be implemented only if the optIfODUkGroup and
     optIfODUkTSinkGroup are also implemented."

Lam, et al. Standards Track [Page 163] RFC 3591 Optical Interface Type MIB September 2003

  GROUP  optIfODUkTNimGroup
  DESCRIPTION
    "This group is mandatory for interfaces of ifType
     opticalChannel(195) that support non-intrusive
     tandem connection monitoring.  It may be implemented
     only if the optIfODUkGroup is also implemented."
::= { optIfCompl 1 }

optIfPreOtnPMCompl MODULE-COMPLIANCE

STATUS  current
DESCRIPTION
  "Implementation requirements for Pre-OTN performance
   monitoring functions defined in this MIB module."
MODULE  -- this module
  MANDATORY-GROUPS  {
    optIfPerfMonGroup
    }
  GROUP  optIfOTSnSinkPreOtnPMGroup
  DESCRIPTION
    "This group is mandatory for interfaces of ifType
     opticalTransport(196) that support OTSn sink
     functions (i.e., for which the corresponding instance
     of optIfOTSnDirectionality -- if implemented -- has
     the value sink(1) or bidirectional(3))."
  GROUP  optIfOTSnSinkPreOtnPMThresholdGroup
  DESCRIPTION
    "This group is mandatory if and only if TCA notifications
     are implemented.  If the objects of this group are instantiated
     then the implementation must also provide, in an
     enterprise MIB, suitable TCA notification definitions and
     notification control objects.  Implementation of the
     optIfOTSnSinkPreOtnPMGroup is a prerequisite for
     implementing this group."
  GROUP  optIfOTSnSourcePreOtnPMGroup
  DESCRIPTION
    "This group is mandatory for interfaces of ifType
     opticalTransport(196) that support OTSn source
     functions (i.e., for which the corresponding instance
     of optIfOTSnDirectionality -- if implemented -- has
     the value source(2) or bidirectional(3))."
  GROUP  optIfOTSnSourcePreOtnPMThresholdGroup

Lam, et al. Standards Track [Page 164] RFC 3591 Optical Interface Type MIB September 2003

  DESCRIPTION
    "This group is mandatory if and only if TCA notifications
     are implemented.  If the objects of this group are instantiated
     then the implementation must also provide, in an
     enterprise MIB, suitable TCA notification definitions and
     notification control objects.  Implementation of the
     optIfOTSnSourcePreOtnPMGroup is a prerequisite for
     implementing this group "
  GROUP  optIfOMSnSinkPreOtnPMGroup
  DESCRIPTION
    "This group is optional.  It may be implemented by systems
     with the necessary instrumentation on interfaces of ifType
     opticalTransport(196) that support OMSn sink functions
     (i.e., for which the corresponding instance of
     optIfOMSnDirectionality -- if implemented -- has the value
     sink(1) or bidirectional(3))."
  GROUP  optIfOMSnSinkPreOtnPMThresholdGroup
  DESCRIPTION
    "This group is mandatory if and only if TCA notifications
     are implemented.  If the objects of this group are instantiated
     then the implementation must also provide, in an
     enterprise MIB, suitable TCA notification definitions and
     notification control objects.  Implementation of the
     optIfOMSnSinkPreOtnPMGroup is a prerequisite for
     implementing this group "
  GROUP  optIfOMSnSourcePreOtnPMGroup
  DESCRIPTION
    "This group is optional.  It may be implemented by systems
     with the necessary instrumentation on interfaces of ifType
     opticalTransport(196) that support OMSn source functions
     (i.e., for which the corresponding instance of
     optIfOMSnDirectionality -- if implemented -- has the value
     source(2) or bidirectional(3))."
  GROUP  optIfOMSnSourcePreOtnPMThresholdGroup
  DESCRIPTION
    "This group is mandatory if and only if TCA notifications
     are implemented.  If the objects of this group are instantiated
     then the implementation must also provide, in an
     enterprise MIB, suitable TCA notification definitions and
     notification control objects.  Implementation of the
     optIfOMSnSourcePreOtnPMGroup is a prerequisite for
     implementing this group "
  GROUP  optIfOChGroupSinkPreOtnPMGroup

Lam, et al. Standards Track [Page 165] RFC 3591 Optical Interface Type MIB September 2003

  DESCRIPTION
    "This group is optional.  It may be implemented by systems
     with the necessary instrumentation on interfaces of ifType
     opticalChannelGroup(219) that support OChGroup sink functions
     (i.e., for which the corresponding instance of
     optIfOChGroupDirectionality -- if implemented -- has the value
     sink(1) or bidirectional(3))."
  GROUP  optIfOChGroupSinkPreOtnPMThresholdGroup
  DESCRIPTION
    "This group is mandatory if and only if TCA notifications
     are implemented.  If the objects of this group are instantiated
     then the implementation must also provide, in an
     enterprise MIB, suitable TCA notification definitions and
     notification control objects.  Implementation of the
     optIfOChGroupSinkPreOtnPMGroup is a prerequisite for
     implementing this group "
  GROUP  optIfOChGroupSourcePreOtnPMGroup
  DESCRIPTION
    "This group is optional.  It may be implemented by systems
     with the necessary instrumentation on interfaces of ifType
     opticalChannelGroup(219) that support OChGroup source functions
     (i.e., for which the corresponding instance of
     optIfOChGroupDirectionality -- if implemented -- has the value
     source(2) or bidirectional(3))."
  GROUP  optIfOChGroupSourcePreOtnPMThresholdGroup
  DESCRIPTION
    "This group is mandatory if and only if TCA notifications
     are implemented.  If the objects of this group are instantiated
     then the implementation must also provide, in an
     enterprise MIB, suitable TCA notification definitions and
     notification control objects.  Implementation of the
     optIfOChGroupSourcePreOtnPMGroup is a prerequisite for
     implementing this group "
  GROUP  optIfOChSinkPreOtnPMGroup
  DESCRIPTION
    "This group is mandatory for interfaces of ifType
     opticalChannel(195) that support OCh sink functions
     (i.e., for which the corresponding instance of
     optIfOChDirectionality -- if implemented -- has the
     value sink(1) or bidirectional(3))."
  GROUP  optIfOChSinkPreOtnPMThresholdGroup
  DESCRIPTION
    "This group is mandatory if and only if TCA notifications

Lam, et al. Standards Track [Page 166] RFC 3591 Optical Interface Type MIB September 2003

     are implemented.  If the objects of this group are instantiated
     then the implementation must also provide, in an
     enterprise MIB, suitable TCA notification definitions and
     notification control objects.  Implementation of the
     optIfOChSinkPreOtnPMGroup is a prerequisite for
     implementing this group "
  GROUP  optIfOChSourcePreOtnPMGroup
  DESCRIPTION
    "This group is mandatory for interfaces of ifType
     opticalChannel(195) that support OCh source functions
     (i.e., for which the corresponding instance of
     optIfOChDirectionality -- if implemented -- has the
     value source(2) or bidirectional(3))."
  GROUP  optIfOChSourcePreOtnPMThresholdGroup
  DESCRIPTION
    "This group is mandatory if and only if TCA notifications
     are implemented.  If the objects of this group are instantiated
     then the implementation must also provide, in an
     enterprise MIB, suitable TCA notification definitions and
     notification control objects.  Implementation of the
     optIfOChSourcePreOtnPMGroup is a prerequisite for
     implementing this group "
::= { optIfCompl 2 }

END

5. Security Considerations

 There are a number of management objects defined in this MIB module
 with a MAX-ACCESS clause of read-write and/or read-create.  It is
 possible for writes to these objects to have disruptive effects on
 network operation that range from invalid performance data to traffic
 interruptions.  Users of this MIB module must therefore be aware that
 support for SET operations in a non-secure environment without proper
 protection can have a negative effect on network operations.  The
 most sensitive objects are the read-write and read-create objects
 listed in the optIfOtnConfigCompl compliance statement that control
 the maximum number of TCM levels allowed (optIfOTMnTcmMax), automatic
 power reduction (optIfOTSnAprControl), transmitted trail trace
 (optIfOTSnTraceIdentifierTransmitted,
 optIfOTUkTraceIdentifierTransmitted,
 optIfODUkTtpTraceIdentifierTransmitted,
 optIfODUkTTraceIdentifierTransmitted), expected source/destination
 access point identifiers (optIfOTSnDAPIExpected,
 optIfOTSnSAPIExpected, optIfOTUkDAPIExpected, optIfOTUkSAPIExpected,

Lam, et al. Standards Track [Page 167] RFC 3591 Optical Interface Type MIB September 2003

 optIfODUkTtpDAPIExpected, optIfODUkTtpSAPIExpected,
 optIfODUkNimDAPIExpected, optIfODUkNimSAPIExpected,
 optIfODUkTDAPIExpected, optIfODUkTSAPIExpected,
 optIfODUkTNimDAPIExpected, optIfODUkTNimSAPIExpected), trace
 identifier mismatch detection mode (optIfOTSnTIMDetMode,
 optIfOTUkTIMDetMode, optIfODUkTtpTIMDetMode, optIfODUkNimTIMDetMode,
 optIfODUkTTIMDetMode, optIfODUkTNimTIMDetMode), trace identifier
 mismatch consequent action (optIfOTSnTIMActEnabled,
 optIfOTUkTIMActEnabled, optIfODUkTtpTIMActEnabled,
 optIfODUkNimTIMActEnabled, optIfODUkTTIMActEnabled,
 optIfODUkTNimTIMActEnabled), threshold level for declaring a PM
 Second to be bad (optIfOTUkDEGThr, optIfODUkTtpDEGThr,
 optIfODUkNimDEGThr, optIfODUkTDEGThr, optIfODUkTNimDEGThr), threshold
 level for declaring a Degraded Signal defect (optIfOTUkDEGM,
 optIfODUkTtpDEGM, optIfODUkNimDEGM, optIfODUkTDEGM,
 optIfODUkTNimDEGM), whether the sink/source adaptation function is
 activated (optIfOTUkSinkAdaptActive, optIfOTUkSourceAdaptActive),
 whether Forward Error Correction is supported
 (optIfOTUkSinkFECEnabled), the application transported by the GCC
 entities (optIfGCC0Application, optIfGCC12Application), creating and
 deleting a conceptual row of a config table (optIfGCC0RowStatus,
 optIfODUkNimRowStatus, optIfGCC12RowStatus, optIfODUkTRowStatus,
 optIfODUkTNimRowStatus), whether the selected GCC overhead bytes are
 passed through or modified (optIfGCC12GCCPassThrough), TCM mode
 (optIfODUkTSinkMode), and provisioning of the sink/source LOCK signal
 (optIfODUkTSinkLockSignalAdminState,
 optIfODUkTSourceLockSignalAdminState), as these may cause traffic
 interruptions if improperly set.
 The readable objects in this MIB module (i.e., the objects with a
 MAX-ACCESS other than not-accessible) may be considered sensitive in
 some environments since, collectively, they provide information about
 the performance of interfaces in OTN equipment or networks and can
 reveal aspects of their configuration.  In such environments it is
 important to control even GET and NOTIFY access to these objects and
 possibly to encrypt the values of these objects when sending them
 over the network via SNMP.
 SNMP versions prior to SNMPv3 did not include adequate security.
 Even if the network itself is secure (for example by using IPSec),
 there is no control as to who on the secure network is allowed to
 access and GET/SET (read/change/create/delete) objects in this MIB
 module.
 It is RECOMMENDED that implementers consider the security features
 provided by the SNMPv3 framework (see [RFC3410], section 8),
 including full support for the SNMPv3 cryptographic mechanisms (for
 authentication and privacy).

Lam, et al. Standards Track [Page 168] RFC 3591 Optical Interface Type MIB September 2003

 Further, deployment of SNMP versions prior to SNMPv3 is NOT
 RECOMMENDED.  Instead, it is RECOMMENDED that SNMPv3 be deployed and
 cryptographic security be enabled.  It is then a customer/operator
 responsibility to ensure that the SNMP entity giving access to an
 instance of this MIB module is properly configured to give access to
 the objects only to those principals (users) that have legitimate
 rights to indeed GET or SET (change/create/delete) them.

6. Acknowledgements

 Nathan Kohn initiated the concept, then gathered and coordinated the
 team that led to the initial version of the MIB.  Mark Stewart/Brian
 Teer wrote sections on use of interface tables, reviewed the MIB
 Object Definitions for SNMP SMIv2 compliance, and wrote the PM
 sections in working with G.7710/Y.1701.  Anni Huynh wrote the initial
 MIB definitions for the OTN interface.  Tom Rutt wrote the summary
 section on the Structure of the MIB.  Rishi Grover contributed to the
 objects to monitor banded amplifiers.  Kam Lam wrote the sections on
 Optical Networking Terminology and the OTN layers configuration
 parameters.  He was the editor for the last several versions of this
 document.
 Thanks to Maarten Vissers for providing insight into Optical
 Networking concepts.  Thanks to Lakshmi Raman and Moshe Rozenblit for
 reviewing and commenting on a preliminary version of the document.
 Special thanks to C. Mike Heard for providing a top notch doctor
 review and many helpful suggestions to improve the MIB.

7. References

7.1. Normative References

 [RFC1213]       McCloghrie, K. and M. Rose, "Management Information
                 Base for Network Management of TCP/IP-based
                 internets: MIB-II", STD 17, RFC 1213, March 1991.
 [RFC2578]       McCloghrie, K., Perkins, D., Schoenwaelder, J., Case,
                 J., Rose, M. and S. Waldbusser, "Structure of
                 Management Information Version 2 (SMIv2)", STD 58,
                 RFC 2578, April 1999.
 [RFC2579]       McCloghrie, K., Perkins, D., Schoenwaelder, J., Case,
                 J., Rose, M. and S. Waldbusser, "Textual Conventions
                 for SMIv2", STD 58, RFC 2579, April 1999.

Lam, et al. Standards Track [Page 169] RFC 3591 Optical Interface Type MIB September 2003

 [RFC2580]       McCloghrie, K., Perkins, D., Schoenwaelder, J., Case,
                 J., Rose, M. and S. Waldbusser, "Conformance
                 Statements for SMIv2", STD 58, RFC 2580, April 1999.
 [RFC2863]       McCloghrie, K. and F. Kastenholz, "The Interfaces
                 Group MIB", RFC 2863, June 2000.
 [RFC2864]       McCloghrie, K. and G. Hanson, "The Inverted Stack
                 Table Extension to the Interfaces Group MIB", RFC
                 2864, June 2000.
 [RFC3411]       Harrington, D., Presuhn, R. and B. Wijnen, "An
                 Architecture for Describing Simple Network Management
                 Protocol (SNMP) Management Frameworks", STD 62, RFC
                 3411, December 2002.
 [RFC3418]       Presuhn, R., "Management Information Base (MIB) for
                 the Simple Network Management Protocol (SNMP)", STD
                 62, RFC 3418, December 2002.
 [ITU-T G.709]   ITU-T Recommendation G.709/Y.1331, "Network Node
                 Interface for the Optical Transport Network (OTN)",
                 (2/2001).
 [ITU-T G.798]   ITU-T Recommendation G.798, "Characteristics of
                 Optical Transport Network Hierarchy Equipment
                 Functional Blocks", (1/2002).
 [ITU-T G.872]   ITU-T Recommendation G.872, "Architecture of optical
                 transport networks", (11/2001).
 [ITU-T G.874]   ITU-T Recommendation G.874, "Management aspects of
                 the optical transport network element", (12/2001).
 [ITU-T G.874.1] ITU-T Recommendation G.874.1, "OTN Protocol-neutral
                 Management Information Model for the NE View",
                 (1/2002).
 [ITU-T G.7710]  ITU-T Recommendation G.7710/Y.1701, "Common Equipment
                 Management Function Requirements", (12/2001)
 [ITU-T G.806]   ITU-T Recommendation G.806, "Characteristics of
                 Transport Equipment - Description methodology and
                 generic functionality", (10/2000).
 [ITU-T G.957]   ITU-T Recommendation G.957, "Optical interfaces for
                 equipments and systems relating to the synchronous
                 digital hierarchy", (7/1999).

Lam, et al. Standards Track [Page 170] RFC 3591 Optical Interface Type MIB September 2003

 [ITU-T G.691]   ITU-T Recommendation G.691, "Optical interfaces for
                 single-channel STM-64, STM-256 and other SDH systems
                 with optical amplifiers", (10/200).

7.2. Informative References

 [RFC3410]       Case, J., Mundy, R., Partain, D. and B. Stewart,
                 "Introduction and Applicability Statements for
                 Internet-Standard Management Framework", RFC 3410,
                 December 2002.
 [RFC3433]       Bierman, A., Romascanu, D. and K. C. Norseth, "Entity
                 Sensor Management Information Base", RFC 3433,
                 December 2002.

8. Intellectual Property Statement

 The IETF takes no position regarding the validity or scope of any
 intellectual property or other rights that might be claimed to
 pertain to the implementation or use of the technology described in
 this document or the extent to which any license under such rights
 might or might not be available; neither does it represent that it
 has made any effort to identify any such rights.  Information on the
 IETF's procedures with respect to rights in standards-track and
 standards-related documentation can be found in BCP-11.  Copies of
 claims of rights made available for publication and any assurances of
 licenses to be made available, or the result of an attempt made to
 obtain a general license or permission for the use of such
 proprietary rights by implementers or users of this specification can
 be obtained from the IETF Secretariat.
 The IETF invites any interested party to bring to its attention any
 copyrights, patents or patent applications, or other proprietary
 rights which may cover technology that may be required to practice
 this standard.  Please address the information to the IETF Executive
 Director.

Lam, et al. Standards Track [Page 171] RFC 3591 Optical Interface Type MIB September 2003

9. Authors' Addresses

 Mark A. Stewart
 Senior Systems Analyst
 Raleigh, NC
 USA
 EMail: mstewart1@nc.rr.com
 An-ni Huynh
 Cetus Networks
 USA
 EMail: a_n_huynh@yahoo.com
 Hing-Kam Lam
 Lucent Technologies
 101 Crawfords Corner Road, Room 4C-616A
 Holmdel, NJ 07733
 USA
 Phone: +1 732-949-8338
 EMail: hklam@lucent.com

Lam, et al. Standards Track [Page 172] RFC 3591 Optical Interface Type MIB September 2003

10. Full Copyright Statement

 Copyright (C) The Internet Society (2003).  All Rights Reserved.
 This document and translations of it may be copied and furnished to
 others, and derivative works that comment on or otherwise explain it
 or assist in its implementation may be prepared, copied, published
 and distributed, in whole or in part, without restriction of any
 kind, provided that the above copyright notice and this paragraph are
 included on all such copies and derivative works.  However, this
 document itself may not be modified in any way, such as by removing
 the copyright notice or references to the Internet Society or other
 Internet organizations, except as needed for the purpose of
 developing Internet standards in which case the procedures for
 copyrights defined in the Internet Standards process must be
 followed, or as required to translate it into languages other than
 English.
 The limited permissions granted above are perpetual and will not be
 revoked by the Internet Society or its successors or assignees.
 This document and the information contained herein is provided on an
 "AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING
 TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
 BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION
 HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF
 MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

Acknowledgement

 Funding for the RFC Editor function is currently provided by the
 Internet Society.

Lam, et al. Standards Track [Page 173]

/data/webs/external/dokuwiki/data/pages/rfc/rfc3591.txt · Last modified: 2003/09/02 20:52 by 127.0.0.1

Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki