GENWiki

Premier IT Outsourcing and Support Services within the UK

User Tools

Site Tools


rfc:rfc3273

Network Working Group S. Waldbusser Request for Comments: 3273 July 2002 Category: Standards Track

   Remote Network Monitoring Management Information Base for High
                         Capacity Networks

Status of this Memo

 This document specifies an Internet standards track protocol for the
 Internet community, and requests discussion and suggestions for
 improvements.  Please refer to the current edition of the "Internet
 Official Protocol Standards" (STD 1) for the standardization state
 and status of this protocol.  Distribution of this memo is unlimited.

Copyright Notice

 Copyright (C) The Internet Society (2002).  All Rights Reserved.

Abstract

 This memo defines a portion of the Management Information Base (MIB)
 for use with network management protocols in TCP/IP-based internets.
 In particular, it defines objects for managing remote network
 monitoring (RMON) devices for use on high speed networks.  This
 document contains a MIB Module that defines these new objects and
 also contains definitions of some updated objects from the RMON-MIB
 in RFC 2819 and the RMON2-MIB in RFC 2021.

Table of Contents

 1  The SNMP Management Framework ............................... 2
 2  Overview .................................................... 3
 2.1  Structure of MIB .......................................... 3
 3  Updates to RMON MIB and RMON2 MIB objects ................... 4
 4  Conventions ................................................. 6
 5  Definitions ................................................. 7
 6  Security Considerations .....................................73
 7  Acknowledgments .............................................73
 8  References ..................................................73
 9  Notices .....................................................75
 10 Author's Address.............................................76
 11 Full Copyright Statement.....................................77

Waldbusser Standards Track [Page 1] RFC 3273 Remote Network Monitoring Management July 2002

1. The SNMP Management Framework

 The SNMP Management Framework presently consists of five major
 components:
    o  An overall architecture, described in RFC 2571 [1].
    o  Mechanisms for describing and naming objects and events for the
       purpose of management.  The first version of this Structure of
       Management Information (SMI) is called SMIv1 and described in
       STD 16, RFC 1155 [2], STD 16, RFC 1212 [3], and RFC 1215 [4].
       The second version, called SMIv2, is described in STD 58, RFC
       2578 [5], RFC 2579 [6], and RFC 2580 [7].
    o  Message protocols for transferring management information.  The
       first version of the SNMP message protocol is called SNMPv1 and
       is described in STD 15, RFC 1157 [8].  A second version of the
       SNMP message protocol, which is not an Internet standards track
       protocol, is called SNMPv2c and is described in RFC 1901 [9],
       and RFC 1906 [10].  The third version of the message protocol
       is called SNMPv3 and is described in RFC 1906 [10], RFC 2572
       [11], and RFC 2574 [12].
    o  Protocol operations for accessing management information.  The
       first set of protocol operations and associated PDU formats is
       described in STD 15, RFC 1157 [8].  A second set of protocol
       operations and associated PDU formats is described in RFC 1905
       [13].
    o  A set of fundamental applications described in RFC 2573 [14]
       and the view-based access control mechanism described in RFC
       2575 [15].
 A more detailed introduction to the current SNMP Management Framework
 can be found in RFC 2570 [22].
 Managed objects are accessed via a virtual information store, termed
 the Management Information Base or MIB.  Objects in the MIB are
 defined using the mechanisms defined in the SMI.
 This memo specifies a MIB module that is compliant to the SMIv2.  A
 MIB conforming to the SMIv1 can be produced through the appropriate
 translations.  The resulting translated MIB must be semantically
 equivalent, except where objects or events are omitted because no
 translation is possible (use of Counter64).  Some machine readable
 information in SMIv2 will be converted into textual descriptions in

Waldbusser Standards Track [Page 2] RFC 3273 Remote Network Monitoring Management July 2002

 SMIv1 during the translation process.  However, this loss of machine
 readable information is not considered to change the semantics of the
 MIB.

2. Overview

 This document continues the architecture created in the RMON MIB [RFC
 2819] by supporting high speed networks.
 Remote network monitoring devices, often called monitors or probes,
 are instruments that exist for the purpose of managing a network.
 Often these remote probes are stand-alone devices and devote
 significant internal resources for the sole purpose of managing a
 network.  An organization may employ many of these devices, one per
 network segment, to manage its internet.  In addition, these devices
 may be used for a network management service provider to access a
 client network, often geographically remote.
 The objects defined in this document are intended as an interface
 between an RMON agent and an RMON management application and are not
 intended for direct manipulation by humans.  While some users may
 tolerate the direct display of some of these objects, few will
 tolerate the complexity of manually manipulating objects to
 accomplish row creation.  These functions should be handled by the
 management application.

2.1 Structure of MIB

 Except for the mediaIndependentTable, each of the tables in this MIB
 adds high capacity capability to an associated table in the RMON-1
 MIB or RMON-2 MIB.
 The objects are arranged into the following groups:
  1. mediaIndependentGroup
  1. etherStatsHighCapacityGroup
  1. etherHistoryHighCapacityGroup
  1. hostHighCapacityGroup
  1. hostTopNHighCapacityGroup
  1. matrixHighCapacityGroup
  1. captureBufferHighCapacityGroup

Waldbusser Standards Track [Page 3] RFC 3273 Remote Network Monitoring Management July 2002

  1. protocolDistributionHighCapacityGroup
  1. nlHostHighCapacityGroup
  1. nlMatrixHighCapacityGroup
  1. nlMatrixTopNHighCapacityGroup
  1. alHostHighCapacityGroup
  1. alMatrixHighCapacityGroup
  1. alMatrixTopNHighCapacityGroup
  1. usrHistoryHighCapacityGroup
 These groups are the basic units of conformance.  If a remote
 monitoring device implements a group, then it must implement all
 objects in that group.  For example, a managed agent that implements
 the network layer matrix group must implement the
 nlMatrixSDHighCapacityTable and the nlMatrixDSHighCapacityTable.
 Implementations of this MIB must also implement the system and
 interfaces group of MIB-II [16,17].  MIB-II may also mandate the
 implementation of additional groups.
 These groups are defined to provide a means of assigning object
 identifiers, and to provide a method for agent implementors to know
 which objects they must implement.

3. Updates to RMON MIB and RMON2 MIB objects

 This document extends the enumerations in the following objects from
 the RMON MIB [18] and the RMON2 MIB [20].

From the RMON MIB:

hostTopNRateBase OBJECT-TYPE

  SYNTAX     INTEGER {
               hostTopNInPkts(1),
               hostTopNOutPkts(2),
               hostTopNInOctets(3),
               hostTopNOutOctets(4),
               hostTopNOutErrors(5),
               hostTopNOutBroadcastPkts(6),
               hostTopNOutMulticastPkts(7),
               hostTopNHCInPkts(8),
               hostTopNHCOutPkts(9),

Waldbusser Standards Track [Page 4] RFC 3273 Remote Network Monitoring Management July 2002

               hostTopNHCInOctets(10),
               hostTopNHCOutOctets(11)
             }
  MAX-ACCESS read-create
  STATUS     current
  DESCRIPTION
      "The variable for each host that the hostTopNRate
      variable is based upon, as well as a control
      for the table that the results will be reported in.
      This object may not be modified if the associated
      hostTopNStatus object is equal to valid(1).
      If this value is less than or equal to 7, when the report
      is prepared, entries are created in the hostTopNTable
      associated with this object.
      If this value is greater than or equal to 8, when the report
      is prepared, entries are created in the
      hostTopNHighCapacityTable associated with this object."
  ::= { hostTopNControlEntry 3 }

From the RMON2 MIB:

nlMatrixTopNControlRateBase OBJECT-TYPE

  SYNTAX      INTEGER {
                  nlMatrixTopNPkts(1),
                  nlMatrixTopNOctets(2),
                  nlMatrixTopNHighCapacityPkts(3),
                  nlMatrixTopNHighCapacityOctets(4)
              }
  MAX-ACCESS read-create
  STATUS     current
  DESCRIPTION
      "The variable for each nlMatrix[SD/DS] entry that the
      nlMatrixTopNEntries are sorted by, as well as a control
      for the table that the results will be reported in.
      This object may not be modified if the associated
      nlMatrixTopNControlStatus object is equal to active(1).
      If this value is less than or equal to 2, when the report
      is prepared, entries are created in the nlMatrixTopNTable
      associated with this object.
      If this value is greater than or equal to 3, when the report
      is prepared, entries are created in the
      nlMatrixTopNHighCapacityTable associated with this object."
  ::= { nlMatrixTopNControlEntry 3 }

Waldbusser Standards Track [Page 5] RFC 3273 Remote Network Monitoring Management July 2002

From the RMON2 MIB:

alMatrixTopNControlRateBase OBJECT-TYPE

  SYNTAX     INTEGER {
                alMatrixTopNTerminalsPkts(1),
                alMatrixTopNTerminalsOctets(2),
                alMatrixTopNAllPkts(3),
                alMatrixTopNAllOctets(4),
                alMatrixTopNTerminalsHighCapacityPkts(5),
                alMatrixTopNTerminalsHighCapacityOctets(6),
                alMatrixTopNAllHighCapacityPkts(7),
                alMatrixTopNAllHighCapacityOctets(8)
             }
  MAX-ACCESS read-create
  STATUS     current
  DESCRIPTION
      "The variable for each alMatrix[SD/DS] entry that the
      alMatrixTopNEntries are sorted by, as well as the
      selector of the view of the matrix table that will be
      used, as well as a control for the table that the results
      will be reported in.
      The values alMatrixTopNTerminalsPkts,
      alMatrixTopNTerminalsOctets,
      alMatrixTopNTerminalsHighCapacityPkts, and
      alMatrixTopNTerminalsHighCapacityOctets cause collection
      only from protocols that have no child protocols that are
      counted.  The values alMatrixTopNAllPkts,
      alMatrixTopNAllOctets, alMatrixTopNAllHighCapacityPkts, and
      alMatrixTopNAllHighCapacityOctets cause collection from all
      alMatrix entries.
      This object may not be modified if the associated
      alMatrixTopNControlStatus object is equal to active(1)."
  ::= { alMatrixTopNControlEntry 3 }

For convenience, updated MIB modules containing these objects may be found at:

ftp://ftp.rfc-editor.org/in-notes/mibs/current.mibs/rmon.mib
ftp://ftp.rfc-editor.org/in-notes/mibs/current.mibs/rmon2.mib

4. Conventions

 The following conventions are used throughout the RMON MIB and its
 companion documents.

Waldbusser Standards Track [Page 6] RFC 3273 Remote Network Monitoring Management July 2002

 The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
 "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
 document are to be interpreted as described in RFC 2119.
 Good Packets
 Good packets are error-free packets that have a valid frame length.
 For example, on Ethernet, good packets are error-free packets that
 are between 64 octets long and 1518 octets long.  They follow the
 form defined in IEEE 802.3 section 3.2.all.  Implementors are urged
 to consult the appropriate media-specific specifications.
 Bad Packets
 Bad packets are packets that have proper framing and are therefore
 recognized as packets, but contain errors within the packet or have
 an invalid length.  For example, on Ethernet, bad packets have a
 valid preamble and SFD (Start of Frame Delimiter), but have a bad FCS
 (Frame Check Sequence), or are either shorter than 64 octets or
 longer than 1518 octets.  Implementors are urged to consult the
 appropriate media-specific specifications.

5. Definitions

HC-RMON-MIB DEFINITIONS ::= BEGIN IMPORTS

  MODULE-IDENTITY, OBJECT-TYPE, Counter32, Integer32,
      Gauge32, Counter64             FROM SNMPv2-SMI
  RowStatus, TimeStamp               FROM SNMPv2-TC
  MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF
  rmon, OwnerString, statistics, history, hosts, hostTopN, matrix,
  etherStatsIndex, etherHistoryIndex, etherHistorySampleIndex,
  hostIndex, hostAddress, hostTimeIndex, hostTimeCreationOrder,
  hostTopNReport, hostTopNIndex,
  matrixSDIndex, matrixSDSourceAddress, matrixSDDestAddress,
  matrixDSIndex, matrixDSDestAddress, matrixDSSourceAddress,
  capture, captureBufferControlIndex, captureBufferIndex
                                  FROM RMON-MIB
  protocolDirLocalIndex, protocolDistControlIndex,
  protocolDist, hlHostControlIndex,
  nlHost, nlHostTimeMark, nlHostAddress,
  hlMatrixControlIndex, nlMatrix,
  nlMatrixSDTimeMark, nlMatrixSDSourceAddress, nlMatrixSDDestAddress,
  nlMatrixDSTimeMark, nlMatrixDSDestAddress, nlMatrixDSSourceAddress,
  nlMatrixTopNControlIndex, nlMatrixTopNIndex,
  alHost, alHostTimeMark,
  alMatrix, alMatrixSDTimeMark, alMatrixDSTimeMark,
  alMatrixTopNControlIndex, alMatrixTopNIndex,

Waldbusser Standards Track [Page 7] RFC 3273 Remote Network Monitoring Management July 2002

  usrHistory, usrHistoryControlIndex,
  usrHistorySampleIndex, usrHistoryObjectIndex,
  rmonConformance, ZeroBasedCounter32, probeConfig
                                  FROM RMON2-MIB
  ZeroBasedCounter64, CounterBasedGauge64
                                  FROM HCNUM-TC;

– Remote Network Monitoring MIB

hcRMON MODULE-IDENTITY

  LAST-UPDATED "200205080000Z"    -- May 08, 2002
  ORGANIZATION "IETF RMON MIB Working Group"
  CONTACT-INFO
      "Steve Waldbusser
      Phone: +1-650-948-6500
      Fax:   +1-650-745-0671
      Email: waldbusser@nextbeacon.com
      Andy Bierman
      WG Chair
      abierman@cisco.com
      RMONMIB WG Mailing List
      rmonmib@ietf.org
      http://www.ietf.org/mailman/listinfo/rmonmib"
  DESCRIPTION
      "The MIB module for managing remote monitoring
      device implementations. This MIB module
      augments the original RMON MIB as specified in
      RFC 2819 and RFC 1513 and RMON-2 MIB as specified in
      RFC 2021."
  REVISION "200205080000Z"    -- May 08, 2002
  DESCRIPTION
      "The original version of this MIB, published as RFC3273."
  ::= { rmonConformance 5 }

– { rmon 1 } through { rmon 20 } are defined in RMON [RFC 2819] and – the Token Ring RMON MIB [RFC 1513] and the RMON-2 MIB [RFC 2021].

mediaIndependentStats OBJECT IDENTIFIER ::= { rmon 21 }

mediaIndependentTable OBJECT-TYPE

  SYNTAX     SEQUENCE OF MediaIndependentEntry
  MAX-ACCESS not-accessible
  STATUS     current
  DESCRIPTION

Waldbusser Standards Track [Page 8] RFC 3273 Remote Network Monitoring Management July 2002

      "Media independent statistics for promiscuous monitoring of
      any media.
      The following table defines media independent statistics that
      provide information for full and/or half-duplex links as well
      as high capacity links.
      For half-duplex links, or full-duplex-capable links operating
      in half-duplex mode, the mediaIndependentIn* objects shall be
      used and the mediaIndependentOut* objects shall not increment.
      For full-duplex links, the mediaIndependentOut* objects shall
      be present and shall increment. Whenever possible, the probe
      should count packets moving away from the closest terminating
      equipment as output packets. Failing that, the probe should
      count packets moving away from the DTE as output packets."
  ::= { mediaIndependentStats 1 }

mediaIndependentEntry OBJECT-TYPE

  SYNTAX     MediaIndependentEntry
  MAX-ACCESS not-accessible
  STATUS      current
  DESCRIPTION
      "Media independent statistics for promiscuous monitoring of
      any media."
  INDEX { mediaIndependentIndex }
  ::= { mediaIndependentTable 1 }

MediaIndependentEntry ::= SEQUENCE {

  mediaIndependentIndex                       Integer32,
  mediaIndependentDataSource                  OBJECT IDENTIFIER,
  mediaIndependentDropEvents                  Counter32,
  mediaIndependentDroppedFrames               Counter32,
  mediaIndependentInPkts                      Counter32,
  mediaIndependentInOverflowPkts              Counter32,
  mediaIndependentInHighCapacityPkts          Counter64,
  mediaIndependentOutPkts                     Counter32,
  mediaIndependentOutOverflowPkts             Counter32,
  mediaIndependentOutHighCapacityPkts         Counter64,
  mediaIndependentInOctets                    Counter32,
  mediaIndependentInOverflowOctets            Counter32,
  mediaIndependentInHighCapacityOctets        Counter64,
  mediaIndependentOutOctets                   Counter32,
  mediaIndependentOutOverflowOctets           Counter32,
  mediaIndependentOutHighCapacityOctets       Counter64,
  mediaIndependentInNUCastPkts                Counter32,
  mediaIndependentInNUCastOverflowPkts        Counter32,

Waldbusser Standards Track [Page 9] RFC 3273 Remote Network Monitoring Management July 2002

  mediaIndependentInNUCastHighCapacityPkts    Counter64,
  mediaIndependentOutNUCastPkts               Counter32,
  mediaIndependentOutNUCastOverflowPkts       Counter32,
  mediaIndependentOutNUCastHighCapacityPkts   Counter64,
  mediaIndependentInErrors                    Counter32,
  mediaIndependentOutErrors                   Counter32,
  mediaIndependentInputSpeed                  Gauge32,
  mediaIndependentOutputSpeed                 Gauge32,
  mediaIndependentDuplexMode                  INTEGER,
  mediaIndependentDuplexChanges               Counter32,
  mediaIndependentDuplexLastChange            TimeStamp,
  mediaIndependentOwner                       OwnerString,
  mediaIndependentStatus                      RowStatus

}

mediaIndependentIndex OBJECT-TYPE

  SYNTAX     Integer32 (1..65535)
  MAX-ACCESS not-accessible
  STATUS     current
  DESCRIPTION
      "The value of this object uniquely identifies this
      mediaIndependent entry."
  ::= { mediaIndependentEntry 1 }

mediaIndependentDataSource OBJECT-TYPE

  SYNTAX     OBJECT IDENTIFIER
  MAX-ACCESS read-create
  STATUS     current
  DESCRIPTION
      "This object identifies the source of the data that
      this mediaIndependent entry is configured to analyze.  This
      source can be any interface on this device.
      In order to identify a particular interface, this
      object shall identify the instance of the ifIndex
      object, defined in RFC 1213 and RFC 2233 [16,17], for
      the desired interface.  For example, if an entry
      were to receive data from interface #1, this object
      would be set to ifIndex.1.
      The statistics in this group reflect all packets
      on the local network segment attached to the
      identified interface.
      An agent may or may not be able to tell if
      fundamental changes to the media of the interface
      have occurred and necessitate a deletion of
      this entry.  For example, a hot-pluggable ethernet
      card could be pulled out and replaced by a

Waldbusser Standards Track [Page 10] RFC 3273 Remote Network Monitoring Management July 2002

      token-ring card.  In such a case, if the agent has
      such knowledge of the change, it is recommended that
      it delete this entry.
      This object may not be modified if the associated
      mediaIndependentStatus object is equal to active(1)."
  ::= { mediaIndependentEntry 2 }

mediaIndependentDropEvents OBJECT-TYPE

  SYNTAX     Counter32
  UNITS      "Events"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The total number of events in which packets
      were dropped by the probe due to lack of resources.
      Note that this number is not necessarily the number of
      packets dropped; it is just the number of times this
      condition has been detected."
  ::= { mediaIndependentEntry 3 }

mediaIndependentDroppedFrames OBJECT-TYPE

  SYNTAX     Counter32
  UNITS      "Packets"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
     "The total number of frames which were received by the probe
      and therefore not accounted for in the
      mediaIndependentDropEvents, but for which the probe chose not
      to count for this entry for whatever reason.  Most often, this
      event occurs when the probe is out of some resources and
      decides to shed load from this collection.
      This count does not include packets that were not counted
      because they had MAC-layer errors.
      Note that, unlike the dropEvents counter, this number is the
      exact number of frames dropped."
  ::= { mediaIndependentEntry 4 }

mediaIndependentInPkts OBJECT-TYPE

  SYNTAX      Counter32
  UNITS       "Packets"
  MAX-ACCESS  read-only
  STATUS      current
  DESCRIPTION
      "The total number of packets (including bad packets,

Waldbusser Standards Track [Page 11] RFC 3273 Remote Network Monitoring Management July 2002

      broadcast packets, and multicast packets) received
      on a half-duplex link or on the inbound connection of a
      full-duplex link."
  ::= { mediaIndependentEntry 5 }

mediaIndependentInOverflowPkts OBJECT-TYPE

  SYNTAX      Counter32
  UNITS       "Packets"
  MAX-ACCESS  read-only
  STATUS      current
  DESCRIPTION
      "The number of times the associated
      mediaIndependentInPkts counter has overflowed."
  ::= { mediaIndependentEntry 6 }

mediaIndependentInHighCapacityPkts OBJECT-TYPE

  SYNTAX      Counter64
  UNITS       "Packets"
  MAX-ACCESS  read-only
  STATUS      current
  DESCRIPTION
      "The total number of packets (including bad packets,
      broadcast packets, and multicast packets) received
      on a half-duplex link or on the inbound connection of a
      full-duplex link."
  ::= { mediaIndependentEntry 7 }

mediaIndependentOutPkts OBJECT-TYPE

  SYNTAX      Counter32
  UNITS       "Packets"
  MAX-ACCESS  read-only
  STATUS      current
  DESCRIPTION
      "The total number of packets (including bad packets,
      broadcast packets, and multicast packets) received on a
      full-duplex link in the direction of the network."
  ::= { mediaIndependentEntry 8 }

mediaIndependentOutOverflowPkts OBJECT-TYPE

  SYNTAX      Counter32
  UNITS       "Packets"
  MAX-ACCESS  read-only
  STATUS      current
  DESCRIPTION
      "The number of times the associated
      mediaIndependentOutPkts counter has overflowed."
  ::= { mediaIndependentEntry 9 }

Waldbusser Standards Track [Page 12] RFC 3273 Remote Network Monitoring Management July 2002

mediaIndependentOutHighCapacityPkts OBJECT-TYPE

  SYNTAX      Counter64
  UNITS       "Packets"
  MAX-ACCESS  read-only
  STATUS      current
  DESCRIPTION
      "The total number of packets (including bad packets,
      broadcast packets, and multicast packets) received on a
      full-duplex link in the direction of the network."
  ::= { mediaIndependentEntry 10 }

mediaIndependentInOctets OBJECT-TYPE

  SYNTAX      Counter32
  UNITS       "Octets"
  MAX-ACCESS  read-only
  STATUS      current
  DESCRIPTION
      "The total number of octets of data (including those in bad
      packets) received (excluding framing bits but including FCS
      octets) on a half-duplex link or on the inbound connection of
      a full-duplex link."
  ::= { mediaIndependentEntry 11 }

mediaIndependentInOverflowOctets OBJECT-TYPE

  SYNTAX      Counter32
  UNITS       "Octets"
  MAX-ACCESS  read-only
  STATUS      current
  DESCRIPTION
      "The number of times the associated
      mediaIndependentInOctets counter has overflowed."
  ::= { mediaIndependentEntry 12 }

mediaIndependentInHighCapacityOctets OBJECT-TYPE

  SYNTAX      Counter64
  UNITS       "Octets"
  MAX-ACCESS  read-only
  STATUS      current
  DESCRIPTION
      "The total number of octets of data (including those in bad
      packets) received (excluding framing bits but
      including FCS octets) on a half-duplex link or on the inbound
      connection of a full-duplex link."
  ::= { mediaIndependentEntry 13 }

mediaIndependentOutOctets OBJECT-TYPE

  SYNTAX      Counter32
  UNITS       "Octets"

Waldbusser Standards Track [Page 13] RFC 3273 Remote Network Monitoring Management July 2002

  MAX-ACCESS  read-only
  STATUS      current
  DESCRIPTION
      "The total number of octets of data (including those in bad
      packets) received on a full-duplex link in the direction of
      the network (excluding framing bits but including FCS
      octets)."
  ::= { mediaIndependentEntry 14 }

mediaIndependentOutOverflowOctets OBJECT-TYPE

  SYNTAX      Counter32
  UNITS       "Octets"
  MAX-ACCESS  read-only
  STATUS      current
  DESCRIPTION
      "The number of times the associated
      mediaIndependentOutOctets counter has overflowed."
  ::= { mediaIndependentEntry 15 }

mediaIndependentOutHighCapacityOctets OBJECT-TYPE

  SYNTAX      Counter64
  UNITS       "Octets"
  MAX-ACCESS  read-only
  STATUS      current
  DESCRIPTION
      "The total number of octets of data (including those in bad
      packets) received on a full-duplex link in the direction of
      the network (excluding framing bits but including FCS
      octets)."
  ::= { mediaIndependentEntry 16 }

mediaIndependentInNUCastPkts OBJECT-TYPE

  SYNTAX      Counter32
  UNITS       "Packets"
  MAX-ACCESS  read-only
  STATUS      current
  DESCRIPTION
      "The total number of non-unicast packets (including bad
      packets) received on a half-duplex link or on the inbound
      connection of a full-duplex link."
  ::= { mediaIndependentEntry 17 }

mediaIndependentInNUCastOverflowPkts OBJECT-TYPE

  SYNTAX      Counter32
  UNITS       "Packets"
  MAX-ACCESS  read-only
  STATUS      current
  DESCRIPTION

Waldbusser Standards Track [Page 14] RFC 3273 Remote Network Monitoring Management July 2002

      "The number of times the associated
      mediaIndependentInNUCastPkts counter has overflowed."
  ::= { mediaIndependentEntry 18 }

mediaIndependentInNUCastHighCapacityPkts OBJECT-TYPE

  SYNTAX      Counter64
  UNITS       "Packets"
  MAX-ACCESS  read-only
  STATUS      current
  DESCRIPTION
      "The total number of non-unicast packets (including bad
      packets) received on a half-duplex link or on the inbound
      connection of a full-duplex link."
  ::= { mediaIndependentEntry 19 }

mediaIndependentOutNUCastPkts OBJECT-TYPE

  SYNTAX      Counter32
  UNITS       "Packets"
  MAX-ACCESS  read-only
  STATUS      current
  DESCRIPTION
      "The total number of non-unicast packets (including bad
      packets) received on a full-duplex link in the direction of
      the network."
  ::= { mediaIndependentEntry 20 }

mediaIndependentOutNUCastOverflowPkts OBJECT-TYPE

  SYNTAX      Counter32
  UNITS       "Packets"
  MAX-ACCESS  read-only
  STATUS      current
  DESCRIPTION
      "The number of times the associated
      mediaIndependentOutNUCastPkts counter has overflowed."
  ::= { mediaIndependentEntry 21 }

mediaIndependentOutNUCastHighCapacityPkts OBJECT-TYPE

  SYNTAX      Counter64
  UNITS       "Packets"
  MAX-ACCESS  read-only
  STATUS      current
  DESCRIPTION
      "The total number of packets (including bad packets)
      received on a full-duplex link in the direction of the
      network."
  ::= { mediaIndependentEntry 22 }

mediaIndependentInErrors OBJECT-TYPE

Waldbusser Standards Track [Page 15] RFC 3273 Remote Network Monitoring Management July 2002

  SYNTAX     Counter32
  UNITS       "Packets"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The total number of bad packets received on a
      half-duplex link or on the inbound connection of a
      full-duplex link."
  ::= { mediaIndependentEntry 23 }

mediaIndependentOutErrors OBJECT-TYPE

  SYNTAX     Counter32
  UNITS       "Packets"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The total number of bad packets received on a full-duplex
      link in the direction of the network."
  ::= { mediaIndependentEntry 24 }

mediaIndependentInputSpeed OBJECT-TYPE

  SYNTAX     Gauge32
  UNITS      "Kilobits per Second"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The nominal maximum speed in kilobits per second of this
      half-duplex link or on the inbound connection of this
      full-duplex link. If the speed is unknown or there is no fixed
      maximum (e.g. a compressed link), this value shall be zero."
  ::= { mediaIndependentEntry 25 }

mediaIndependentOutputSpeed OBJECT-TYPE

  SYNTAX     Gauge32
  UNITS      "Kilobits per Second"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The nominal maximum speed in kilobits per second of this
      full-duplex link in the direction of the network. If the speed
      is unknown, the link is half-duplex, or there is no fixed
      maximum (e.g. a compressed link), this value shall be zero."
  ::= { mediaIndependentEntry 26 }

mediaIndependentDuplexMode OBJECT-TYPE

  SYNTAX     INTEGER {
                  halfduplex(1),
                  fullduplex(2)

Waldbusser Standards Track [Page 16] RFC 3273 Remote Network Monitoring Management July 2002

             }
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The current mode of this link.
      Note that if the link has full-duplex capabilities but
      is operating in half-duplex mode, this value will be
      halfduplex(1)."
  ::= { mediaIndependentEntry 27 }

mediaIndependentDuplexChanges OBJECT-TYPE

  SYNTAX     Counter32
  UNITS      "Events"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The number of times this link has changed from full-duplex
      mode to half-duplex mode or from half-duplex mode to
      full-duplex mode."
  ::= { mediaIndependentEntry 28 }

mediaIndependentDuplexLastChange OBJECT-TYPE

  SYNTAX     TimeStamp
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The value of sysUpTime at the time the duplex status
      of this link last changed."
  ::= { mediaIndependentEntry 29 }

mediaIndependentOwner OBJECT-TYPE

  SYNTAX     OwnerString
  MAX-ACCESS read-create
  STATUS     current
  DESCRIPTION
      "The entity that configured this entry and is
      therefore using the resources assigned to it."
  ::= { mediaIndependentEntry 30 }

mediaIndependentStatus OBJECT-TYPE

  SYNTAX      RowStatus
  MAX-ACCESS  read-create
  STATUS      current
  DESCRIPTION
      "The status of this media independent statistics entry."
  ::= { mediaIndependentEntry 31 }

Waldbusser Standards Track [Page 17] RFC 3273 Remote Network Monitoring Management July 2002

– High Capacity extensions for the etherStatsTable

etherStatsHighCapacityTable OBJECT-TYPE

  SYNTAX     SEQUENCE OF EtherStatsHighCapacityEntry
  MAX-ACCESS not-accessible
  STATUS     current
  DESCRIPTION
      "Contains the High Capacity RMON extensions to the RMON-1
      etherStatsTable."
  ::= { statistics 7 }

etherStatsHighCapacityEntry OBJECT-TYPE

  SYNTAX     EtherStatsHighCapacityEntry
  MAX-ACCESS not-accessible
  STATUS     current
  DESCRIPTION
      "Contains the High Capacity RMON extensions to the RMON-1
      etherStatsEntry. These objects will be created by the agent
      for all etherStatsEntries it deems appropriate."
  INDEX { etherStatsIndex }
  ::= { etherStatsHighCapacityTable 1 }

EtherStatsHighCapacityEntry ::= SEQUENCE {

  etherStatsHighCapacityOverflowPkts                 Counter32,
  etherStatsHighCapacityPkts                         Counter64,
  etherStatsHighCapacityOverflowOctets               Counter32,
  etherStatsHighCapacityOctets                       Counter64,
  etherStatsHighCapacityOverflowPkts64Octets         Counter32,
  etherStatsHighCapacityPkts64Octets                 Counter64,
  etherStatsHighCapacityOverflowPkts65to127Octets    Counter32,
  etherStatsHighCapacityPkts65to127Octets            Counter64,
  etherStatsHighCapacityOverflowPkts128to255Octets   Counter32,
  etherStatsHighCapacityPkts128to255Octets           Counter64,
  etherStatsHighCapacityOverflowPkts256to511Octets   Counter32,
  etherStatsHighCapacityPkts256to511Octets           Counter64,
  etherStatsHighCapacityOverflowPkts512to1023Octets  Counter32,
  etherStatsHighCapacityPkts512to1023Octets          Counter64,
  etherStatsHighCapacityOverflowPkts1024to1518Octets Counter32,
  etherStatsHighCapacityPkts1024to1518Octets         Counter64

}

etherStatsHighCapacityOverflowPkts OBJECT-TYPE

  SYNTAX     Counter32
  UNITS      "Packets"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION

Waldbusser Standards Track [Page 18] RFC 3273 Remote Network Monitoring Management July 2002

      "The number of times the associated etherStatsPkts
      counter has overflowed."
  ::= { etherStatsHighCapacityEntry 1 }

etherStatsHighCapacityPkts OBJECT-TYPE

  SYNTAX     Counter64
  UNITS      "Packets"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The total number of packets (including bad packets,
      broadcast packets, and multicast packets) received."
  ::= { etherStatsHighCapacityEntry 2 }

etherStatsHighCapacityOverflowOctets OBJECT-TYPE

  SYNTAX     Counter32
  UNITS      "Octets"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The number of times the associated etherStatsOctets
      counter has overflowed."
  ::= { etherStatsHighCapacityEntry 3 }

etherStatsHighCapacityOctets OBJECT-TYPE

  SYNTAX     Counter64
  UNITS      "Octets"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The total number of octets of data (including
      those in bad packets) received on the
      network (excluding framing bits but including
      FCS octets).
      If the network is half-duplex Fast Ethernet, this
      object can be used as a reasonable estimate of
      utilization. If greater precision is desired, the
      etherStatsHighCapacityPkts and
      etherStatsHighCapacityOctets objects should be sampled
      before and after a common interval.  The differences
      in the sampled values are Pkts and Octets,
      respectively, and the number of seconds in the
      interval is Interval.  These values
      are used to calculate the Utilization as follows:

Waldbusser Standards Track [Page 19] RFC 3273 Remote Network Monitoring Management July 2002

                      Pkts * (.96 + .64) + (Octets * .08)
      Utilization = -------------------------------------
                              Interval * 10,000
      The result of this equation is the value Utilization
      which is the percent utilization of the ethernet
      segment on a scale of 0 to 100 percent.
      This table is not appropriate for monitoring full-duplex
      ethernets. If the network is a full-duplex ethernet and the
      mediaIndependentTable is monitoring that network, the
      utilization can be calculated as follows:
      1) Determine the utilization of the inbound path by using
         the appropriate equation (for ethernet or fast ethernet)
         to determine the utilization, substituting
         mediaIndependentInPkts for etherStatsHighCapacityPkts, and
         mediaIndependentInOctets for etherStatsHighCapacityOctets.
         Call the resulting utilization inUtilization.
      2) Determine the utilization of the outbound path by using
         the same equation to determine the utilization, substituting
         mediaIndependentOutPkts for etherStatsHighCapacityPkts, and
         mediaIndependentOutOctets for etherStatsHighCapacityOctets.
         Call the resulting utilization outUtilization.
      3) The utilization is the maximum of inUtilization and
         outUtilization. This metric shows the amount of percentage
         of bandwidth that is left before congestion will be
         experienced on the link."
  ::= { etherStatsHighCapacityEntry 4 }

etherStatsHighCapacityOverflowPkts64Octets OBJECT-TYPE

  SYNTAX     Counter32
  UNITS      "Packets"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The number of times the associated etherStatsPkts64Octets
      counter has overflowed."
  ::= { etherStatsHighCapacityEntry 5 }

etherStatsHighCapacityPkts64Octets OBJECT-TYPE

  SYNTAX     Counter64
  UNITS      "Packets"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION

Waldbusser Standards Track [Page 20] RFC 3273 Remote Network Monitoring Management July 2002

      "The total number of packets (including bad
      packets) received that were 64 octets in length
      (excluding framing bits but including FCS octets)."
  ::= { etherStatsHighCapacityEntry 6 }

etherStatsHighCapacityOverflowPkts65to127Octets OBJECT-TYPE

  SYNTAX     Counter32
  UNITS      "Packets"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The number of times the associated etherStatsPkts65to127Octets
      counter has overflowed."
  ::= { etherStatsHighCapacityEntry 7 }

etherStatsHighCapacityPkts65to127Octets OBJECT-TYPE

  SYNTAX     Counter64
  UNITS      "Packets"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The total number of packets (including bad
      packets) received that were between
      65 and 127 octets in length inclusive
      (excluding framing bits but including FCS octets)."
  ::= { etherStatsHighCapacityEntry 8 }

etherStatsHighCapacityOverflowPkts128to255Octets OBJECT-TYPE

  SYNTAX     Counter32
  UNITS      "Packets"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The number of times the associated etherStatsPkts128to255Octets
      counter has overflowed."
  ::= { etherStatsHighCapacityEntry 9 }

etherStatsHighCapacityPkts128to255Octets OBJECT-TYPE

  SYNTAX     Counter64
  UNITS      "Packets"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The total number of packets (including bad
      packets) received that were between
      128 and 255 octets in length inclusive
      (excluding framing bits but including FCS octets)."
  ::= { etherStatsHighCapacityEntry 10 }

Waldbusser Standards Track [Page 21] RFC 3273 Remote Network Monitoring Management July 2002

etherStatsHighCapacityOverflowPkts256to511Octets OBJECT-TYPE

  SYNTAX     Counter32
  UNITS      "Packets"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The number of times the associated etherStatsPkts256to511Octets
      counter has overflowed."
  ::= { etherStatsHighCapacityEntry 11 }

etherStatsHighCapacityPkts256to511Octets OBJECT-TYPE

  SYNTAX     Counter64
  UNITS      "Packets"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The total number of packets (including bad
      packets) received that were between
      256 and 511 octets in length inclusive
      (excluding framing bits but including FCS octets)."
  ::= { etherStatsHighCapacityEntry 12 }

etherStatsHighCapacityOverflowPkts512to1023Octets OBJECT-TYPE

  SYNTAX     Counter32
  UNITS      "Packets"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The number of times the associated
       etherStatsPkts512to1023Octets counter has overflowed."
  ::= { etherStatsHighCapacityEntry 13 }

etherStatsHighCapacityPkts512to1023Octets OBJECT-TYPE

  SYNTAX     Counter64
  UNITS      "Packets"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The total number of packets (including bad
      packets) received that were between
      512 and 1023 octets in length inclusive
      (excluding framing bits but including FCS octets)."
  ::= { etherStatsHighCapacityEntry 14 }

etherStatsHighCapacityOverflowPkts1024to1518Octets OBJECT-TYPE

  SYNTAX     Counter32
  UNITS      "Packets"
  MAX-ACCESS read-only

Waldbusser Standards Track [Page 22] RFC 3273 Remote Network Monitoring Management July 2002

  STATUS     current
  DESCRIPTION
      "The number of times the associated
      etherStatsPkts1024to1518Octets counter has overflowed."
  ::= { etherStatsHighCapacityEntry 15 }

etherStatsHighCapacityPkts1024to1518Octets OBJECT-TYPE

  SYNTAX     Counter64
  UNITS      "Packets"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The total number of packets (including bad
      packets) received that were between
      1024 and 1518 octets in length inclusive
      (excluding framing bits but including FCS octets)."
  ::= { etherStatsHighCapacityEntry 16 }

– High Capacity extensions for the etherHistoryTable

etherHistoryHighCapacityTable OBJECT-TYPE

  SYNTAX     SEQUENCE OF EtherHistoryHighCapacityEntry
  MAX-ACCESS not-accessible
  STATUS     current
  DESCRIPTION
      "Contains the High Capacity RMON extensions to the RMON-1
      etherHistoryTable."
  ::= { history 6 }

etherHistoryHighCapacityEntry OBJECT-TYPE

  SYNTAX     EtherHistoryHighCapacityEntry
  MAX-ACCESS not-accessible
  STATUS     current
  DESCRIPTION
      "Contains the High Capacity RMON extensions to the RMON-1
      etherHistoryEntry. These objects will be created by the agent
      for all etherHistoryEntries associated with whichever
      historyControlEntries it deems appropriate. (i.e., either all
      etherHistoryHighCapacityEntries associated with a particular
      historyControlEntry will be created, or none of them will
      be.)"
  INDEX { etherHistoryIndex, etherHistorySampleIndex }
  ::= { etherHistoryHighCapacityTable 1 }

EtherHistoryHighCapacityEntry ::= SEQUENCE {

  etherHistoryHighCapacityOverflowPkts           Gauge32,
  etherHistoryHighCapacityPkts                   CounterBasedGauge64,
  etherHistoryHighCapacityOverflowOctets         Gauge32,

Waldbusser Standards Track [Page 23] RFC 3273 Remote Network Monitoring Management July 2002

  etherHistoryHighCapacityOctets                 CounterBasedGauge64

}

etherHistoryHighCapacityOverflowPkts OBJECT-TYPE

  SYNTAX     Gauge32
  UNITS      "Packets"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The number of times the associated etherHistoryPkts
      Gauge overflowed during this sampling interval."
  ::= { etherHistoryHighCapacityEntry 1 }

etherHistoryHighCapacityPkts OBJECT-TYPE

  SYNTAX     CounterBasedGauge64
  UNITS      "Packets"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The total number of packets (including bad packets,
      broadcast packets, and multicast packets) received during
      this sampling interval."
  ::= { etherHistoryHighCapacityEntry 2 }

etherHistoryHighCapacityOverflowOctets OBJECT-TYPE

  SYNTAX     Gauge32
  UNITS      "Octets"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The number of times the associated etherHistoryOctets
      counter has overflowed during this sampling interval."
  ::= { etherHistoryHighCapacityEntry 3 }

etherHistoryHighCapacityOctets OBJECT-TYPE

  SYNTAX     CounterBasedGauge64
  UNITS      "Octets"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The total number of octets of data (including
      those in bad packets) received on the
      network (excluding framing bits but including
      FCS octets) during this sampling interval."
  ::= { etherHistoryHighCapacityEntry 4 }

– High Capacity Extensions for the hostTable

Waldbusser Standards Track [Page 24] RFC 3273 Remote Network Monitoring Management July 2002

hostHighCapacityTable OBJECT-TYPE

  SYNTAX     SEQUENCE OF HostHighCapacityEntry
  MAX-ACCESS not-accessible
  STATUS     current
  DESCRIPTION
      "Contains the High Capacity RMON extensions to the RMON-1
      hostTable."
  ::= { hosts 5 }

hostHighCapacityEntry OBJECT-TYPE

  SYNTAX     HostHighCapacityEntry
  MAX-ACCESS not-accessible
  STATUS     current
  DESCRIPTION
      "Contains the High Capacity RMON extensions to the RMON-1
      hostEntry. These objects will be created by the agent
      for all hostEntries associated with whichever
      hostControlEntries it deems appropriate. (i.e., either all
      hostHighCapacityEntries associated with a particular
      hostControlEntry will be created, or none of them will
      be.)"
  INDEX { hostIndex, hostAddress }
  ::= { hostHighCapacityTable 1 }

HostHighCapacityEntry ::= SEQUENCE {

  hostHighCapacityInOverflowPkts    Counter32,
  hostHighCapacityInPkts            Counter64,
  hostHighCapacityOutOverflowPkts   Counter32,
  hostHighCapacityOutPkts           Counter64,
  hostHighCapacityInOverflowOctets  Counter32,
  hostHighCapacityInOctets          Counter64,
  hostHighCapacityOutOverflowOctets Counter32,
  hostHighCapacityOutOctets         Counter64

}

hostHighCapacityInOverflowPkts OBJECT-TYPE

  SYNTAX     Counter32
  UNITS      "Packets"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The number of times the associated hostInPkts
      counter has overflowed."
  ::= { hostHighCapacityEntry 1 }

hostHighCapacityInPkts OBJECT-TYPE

  SYNTAX     Counter64
  UNITS      "Packets"

Waldbusser Standards Track [Page 25] RFC 3273 Remote Network Monitoring Management July 2002

  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The number of good packets transmitted to
      this address since it was added to the
      hostHighCapacityTable."
  ::= { hostHighCapacityEntry 2 }

hostHighCapacityOutOverflowPkts OBJECT-TYPE

  SYNTAX     Counter32
  UNITS      "Packets"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The number of times the associated hostOutPkts
      counter has overflowed."
  ::= { hostHighCapacityEntry 3 }

hostHighCapacityOutPkts OBJECT-TYPE

  SYNTAX     Counter64
  UNITS      "Packets"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The number of packets, including bad packets, transmitted
      by this address since it was added to the
      hostHighCapacityTable."
  ::= { hostHighCapacityEntry 4 }

hostHighCapacityInOverflowOctets OBJECT-TYPE

  SYNTAX     Counter32
  UNITS      "Octets"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The number of times the associated hostInOctets
      counter has overflowed."
  ::= { hostHighCapacityEntry 5 }

hostHighCapacityInOctets OBJECT-TYPE

  SYNTAX     Counter64
  UNITS      "Octets"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The number of octets transmitted to this address
      since it was added to the hostHighCapacityTable (excluding
      framing bits but including FCS octets), except for

Waldbusser Standards Track [Page 26] RFC 3273 Remote Network Monitoring Management July 2002

      those octets in bad packets."
  ::= { hostHighCapacityEntry 6 }

hostHighCapacityOutOverflowOctets OBJECT-TYPE

  SYNTAX     Counter32
  UNITS      "Octets"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The number of times the associated hostOutOctets
      counter has overflowed."
  ::= { hostHighCapacityEntry 7 }

hostHighCapacityOutOctets OBJECT-TYPE

  SYNTAX     Counter64
  UNITS      "Octets"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The number of octets transmitted by this address
      since it was added to the hostHighCapacityTable (excluding
      framing bits but including FCS octets), including
      those octets in bad packets."
  ::= { hostHighCapacityEntry 8 }

– High Capacity extensions for the hostTimeTable

hostTimeHighCapacityTable OBJECT-TYPE

  SYNTAX     SEQUENCE OF HostTimeHighCapacityEntry
  MAX-ACCESS not-accessible
  STATUS     current
  DESCRIPTION
      "Contains the High Capacity RMON extensions to the RMON-1
      hostTimeTable."
  ::= { hosts 6 }

hostTimeHighCapacityEntry OBJECT-TYPE

  SYNTAX     HostTimeHighCapacityEntry
  MAX-ACCESS not-accessible
  STATUS     current
  DESCRIPTION
      "Contains the High Capacity RMON extensions to the RMON-1
      hostTimeEntry. These objects will be created by the agent
      for all hostTimeEntries associated with whichever
      hostControlEntries it deems appropriate. (i.e., either all
      hostTimeHighCapacityEntries associated with a particular
      hostControlEntry will be created, or none of them will
      be.)"

Waldbusser Standards Track [Page 27] RFC 3273 Remote Network Monitoring Management July 2002

  INDEX { hostTimeIndex, hostTimeCreationOrder }
  ::= { hostTimeHighCapacityTable 1 }

HostTimeHighCapacityEntry ::= SEQUENCE {

  hostTimeHighCapacityInOverflowPkts    Counter32,
  hostTimeHighCapacityInPkts            Counter64,
  hostTimeHighCapacityOutOverflowPkts   Counter32,
  hostTimeHighCapacityOutPkts           Counter64,
  hostTimeHighCapacityInOverflowOctets  Counter32,
  hostTimeHighCapacityInOctets          Counter64,
  hostTimeHighCapacityOutOverflowOctets Counter32,
  hostTimeHighCapacityOutOctets         Counter64

}

hostTimeHighCapacityInOverflowPkts OBJECT-TYPE

  SYNTAX     Counter32
  UNITS      "Packets"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The number of times the associated hostTimeInPkts
      counter has overflowed."
  ::= { hostTimeHighCapacityEntry 1 }

hostTimeHighCapacityInPkts OBJECT-TYPE

  SYNTAX     Counter64
  UNITS      "Packets"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The number of good packets transmitted to this address
      since it was added to the hostTimeHighCapacityTable."
  ::= { hostTimeHighCapacityEntry 2 }

hostTimeHighCapacityOutOverflowPkts OBJECT-TYPE

  SYNTAX     Counter32
  UNITS      "Packets"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The number of times the associated hostTimeOutPkts
      counter has overflowed."
  ::= { hostTimeHighCapacityEntry 3 }

hostTimeHighCapacityOutPkts OBJECT-TYPE

  SYNTAX     Counter64
  UNITS      "Packets"
  MAX-ACCESS read-only

Waldbusser Standards Track [Page 28] RFC 3273 Remote Network Monitoring Management July 2002

  STATUS     current
  DESCRIPTION
      "The number of packets, including bad packets, transmitted
      by this address since it was added to the
      hostTimeHighCapacityTable."
  ::= { hostTimeHighCapacityEntry 4 }

hostTimeHighCapacityInOverflowOctets OBJECT-TYPE

  SYNTAX     Counter32
  UNITS      "Octets"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The number of times the associated hostTimeInOctets
      counter has overflowed."
  ::= { hostTimeHighCapacityEntry 5 }

hostTimeHighCapacityInOctets OBJECT-TYPE

  SYNTAX     Counter64
  UNITS      "Octets"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The number of octets transmitted to this address
      since it was added to the hostTimeHighCapacityTable
      (excluding framing bits but including FCS octets),
      except for those octets in bad packets."
  ::= { hostTimeHighCapacityEntry 6 }

hostTimeHighCapacityOutOverflowOctets OBJECT-TYPE

  SYNTAX     Counter32
  UNITS      "Octets"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The number of times the associated hostTimeOutOctets
      counter has overflowed."
  ::= { hostTimeHighCapacityEntry 7 }

hostTimeHighCapacityOutOctets OBJECT-TYPE

  SYNTAX     Counter64
  UNITS      "Octets"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The number of octets transmitted by this address since
      it was added to the hostTimeTable (excluding framing
      bits but including FCS octets), including those

Waldbusser Standards Track [Page 29] RFC 3273 Remote Network Monitoring Management July 2002

      octets in bad packets."
  ::= { hostTimeHighCapacityEntry 8 }

– High Capacity Extensions for the hostTopNTable

hostTopNHighCapacityTable OBJECT-TYPE

  SYNTAX     SEQUENCE OF HostTopNHighCapacityEntry
  MAX-ACCESS not-accessible
  STATUS     current
  DESCRIPTION
      "Contains the High Capacity RMON extensions to the RMON-1
      hostTopNTable when hostTopNRateBase specifies a High Capacity
      TopN Report."
  ::= { hostTopN 3 }

hostTopNHighCapacityEntry OBJECT-TYPE

  SYNTAX     HostTopNHighCapacityEntry
  MAX-ACCESS not-accessible
  STATUS     current
  DESCRIPTION
      "Contains the High Capacity RMON extensions to the RMON-1
      hostTopNEntry when hostTopNRateBase specifies a High Capacity
      TopN Report. These objects will be created by the agent
      for all hostTopNEntries associated with whichever
      hostTopNControlEntries have a hostTopNRateBase that specify
      a high capacity report."
  INDEX { hostTopNReport, hostTopNIndex }
  ::= { hostTopNHighCapacityTable 1 }

HostTopNHighCapacityEntry ::= SEQUENCE {

   hostTopNHighCapacityAddress        OCTET STRING,
   hostTopNHighCapacityBaseRate       Gauge32,
   hostTopNHighCapacityOverflowRate   Gauge32,
   hostTopNHighCapacityRate           CounterBasedGauge64

}

hostTopNHighCapacityAddress OBJECT-TYPE

  SYNTAX     OCTET STRING
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
        "The physical address of this host."
  ::= { hostTopNHighCapacityEntry 1 }

hostTopNHighCapacityBaseRate OBJECT-TYPE

  SYNTAX     Gauge32
  MAX-ACCESS read-only
  STATUS     current

Waldbusser Standards Track [Page 30] RFC 3273 Remote Network Monitoring Management July 2002

  DESCRIPTION
        "The amount of change in the selected variable
        during this sampling interval, modulo 2^32.  The
        selected variable is this host's instance of the
        object selected by hostTopNRateBase."
  ::= { hostTopNHighCapacityEntry 2 }

hostTopNHighCapacityOverflowRate OBJECT-TYPE

  SYNTAX     Gauge32
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
        "The amount of change in the selected variable
        during this sampling interval, divided by 2^32, truncating
        fractions (i.e., X DIV 2^32).  The selected variable is
        this host's instance of the object selected by
        hostTopNRateBase."
  ::= { hostTopNHighCapacityEntry 3 }

hostTopNHighCapacityRate OBJECT-TYPE

   SYNTAX     CounterBasedGauge64
   MAX-ACCESS read-only
   STATUS     current
   DESCRIPTION
        "The amount of change in the selected variable
        during this sampling interval.  The selected
        variable is this host's instance of the object
        selected by hostTopNRateBase."
   ::= { hostTopNHighCapacityEntry 4 }

– High Capacity Extensions for the matrixSDTable

matrixSDHighCapacityTable OBJECT-TYPE

  SYNTAX     SEQUENCE OF MatrixSDHighCapacityEntry
  MAX-ACCESS not-accessible
  STATUS     current
  DESCRIPTION
      "Contains the High Capacity RMON extensions to the RMON-1
      matrixSDTable."
  ::= { matrix 5 }

matrixSDHighCapacityEntry OBJECT-TYPE

  SYNTAX     MatrixSDHighCapacityEntry
  MAX-ACCESS not-accessible
  STATUS     current
  DESCRIPTION
      "Contains the High Capacity RMON extensions to the RMON-1
      matrixSDEntry. These objects will be created by the agent

Waldbusser Standards Track [Page 31] RFC 3273 Remote Network Monitoring Management July 2002

      for all matrixSDEntries associated with whichever
      matrixControlEntries it deems appropriate. (i.e., either all
      matrixSDHighCapacityEntries associated with a particular
      matrixControlEntry will be created, or none of them will
      be.)"
  INDEX { matrixSDIndex,
          matrixSDSourceAddress, matrixSDDestAddress }
  ::= { matrixSDHighCapacityTable 1 }

MatrixSDHighCapacityEntry ::= SEQUENCE {

  matrixSDHighCapacityOverflowPkts   Counter32,
  matrixSDHighCapacityPkts           Counter64,
  matrixSDHighCapacityOverflowOctets Counter32,
  matrixSDHighCapacityOctets         Counter64

}

matrixSDHighCapacityOverflowPkts OBJECT-TYPE

  SYNTAX     Counter32
  UNITS      "Packets"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The number of times the associated matrixSDPkts
      counter has overflowed."
  ::= { matrixSDHighCapacityEntry 1 }

matrixSDHighCapacityPkts OBJECT-TYPE

  SYNTAX     Counter64
  UNITS      "Packets"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The number of packets transmitted from the source
      address to the destination address (this number
      includes bad packets)."
  ::= { matrixSDHighCapacityEntry 2 }

matrixSDHighCapacityOverflowOctets OBJECT-TYPE

  SYNTAX     Counter32
  UNITS      "Octets"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The number of times the associated matrixSDOctets
      counter has overflowed."
  ::= { matrixSDHighCapacityEntry 3 }

matrixSDHighCapacityOctets OBJECT-TYPE

Waldbusser Standards Track [Page 32] RFC 3273 Remote Network Monitoring Management July 2002

  SYNTAX     Counter64
  UNITS      "Octets"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The number of octets (excluding framing bits but
      including FCS octets) contained in all packets
      transmitted from the source address to the
      destination address."
  ::= { matrixSDHighCapacityEntry 4 }

– High Capacity extensions for the matrixDSTable

matrixDSHighCapacityTable OBJECT-TYPE

  SYNTAX     SEQUENCE OF MatrixDSHighCapacityEntry
  MAX-ACCESS not-accessible
  STATUS     current
  DESCRIPTION
      "Contains the High Capacity RMON extensions to the RMON-1
      matrixDSTable."
  ::= { matrix 6 }

matrixDSHighCapacityEntry OBJECT-TYPE

  SYNTAX     MatrixDSHighCapacityEntry
  MAX-ACCESS not-accessible
  STATUS     current
  DESCRIPTION
      "Contains the High Capacity RMON extensions to the RMON-1
      matrixDSEntry. These objects will be created by the agent
      for all matrixDSEntries associated with whichever
      matrixControlEntries it deems appropriate. (i.e., either all
      matrixDSHighCapacityEntries associated with a particular
      matrixControlEntry will be created, or none of them will
      be.)"
  INDEX { matrixDSIndex,
          matrixDSDestAddress, matrixDSSourceAddress }
  ::= { matrixDSHighCapacityTable 1 }

MatrixDSHighCapacityEntry ::= SEQUENCE {

  matrixDSHighCapacityOverflowPkts   Counter32,
  matrixDSHighCapacityPkts           Counter64,
  matrixDSHighCapacityOverflowOctets Counter32,
  matrixDSHighCapacityOctets         Counter64

}

matrixDSHighCapacityOverflowPkts OBJECT-TYPE

  SYNTAX     Counter32
  UNITS      "Packets"

Waldbusser Standards Track [Page 33] RFC 3273 Remote Network Monitoring Management July 2002

  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The number of times the associated matrixDSPkts
      counter has overflowed."
  ::= { matrixDSHighCapacityEntry 1 }

matrixDSHighCapacityPkts OBJECT-TYPE

  SYNTAX     Counter64
  UNITS      "Packets"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The number of packets transmitted from the source
      address to the destination address (this number
      includes bad packets)."
  ::= { matrixDSHighCapacityEntry 2 }

matrixDSHighCapacityOverflowOctets OBJECT-TYPE

  SYNTAX     Counter32
  UNITS      "Octets"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The number of times the associated matrixDSOctets
      counter has overflowed."
  ::= { matrixDSHighCapacityEntry 3 }

matrixDSHighCapacityOctets OBJECT-TYPE

  SYNTAX     Counter64
  UNITS      "Octets"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The number of octets (excluding framing bits
      but including FCS octets) contained in all packets
      transmitted from the source address to the
      destination address."
  ::= { matrixDSHighCapacityEntry 4 }

– High Capacity extensions for the captureBufferTable

captureBufferHighCapacityTable OBJECT-TYPE

  SYNTAX     SEQUENCE OF CaptureBufferHighCapacityEntry
  MAX-ACCESS not-accessible
  STATUS     current
  DESCRIPTION
      "Contains the High Capacity RMON extensions to the RMON-1

Waldbusser Standards Track [Page 34] RFC 3273 Remote Network Monitoring Management July 2002

      captureBufferTable."
  ::= { capture 3 }

captureBufferHighCapacityEntry OBJECT-TYPE

  SYNTAX     CaptureBufferHighCapacityEntry
  MAX-ACCESS not-accessible
  STATUS     current
  DESCRIPTION
      "Contains the High Capacity RMON extensions to the RMON-1
      captureBufferEntry. These objects will be created by the agent
      for all captureBufferEntries associated with whichever
      bufferControlEntries it deems appropriate. (i.e., either all
      captureBufferHighCapacityEntries associated with a particular
      bufferControlEntry will be created, or none of them will
      be.)"
  INDEX { captureBufferControlIndex, captureBufferIndex }
  ::= { captureBufferHighCapacityTable 1 }

CaptureBufferHighCapacityEntry ::= SEQUENCE {

  captureBufferPacketHighCapacityTime     Integer32

}

captureBufferPacketHighCapacityTime OBJECT-TYPE

  SYNTAX      Integer32 (0..999999)
  UNITS       "nanoseconds"
  MAX-ACCESS  read-only
  STATUS      current
  DESCRIPTION
      "The number of nanoseconds that had passed since this capture
      buffer was first turned on when this packet was captured,
      modulo 10^6.
      This object is used in conjunction with the
      captureBufferPacketTime object. This object returns the
      number of nano-seconds to be added to to number of
      milli-seconds obtained from the captureBufferPacketTime
      object, to obtain more accurate inter packet arrival time."
::= { captureBufferHighCapacityEntry 1 }

– High Capacity extensions for the protocolDistStatsTable

protocolDistStatsHighCapacityTable OBJECT-TYPE

  SYNTAX     SEQUENCE OF ProtocolDistStatsHighCapacityEntry
  MAX-ACCESS not-accessible
  STATUS     current
  DESCRIPTION
      "Contains the High Capacity RMON extensions to the RMON-2
      protocolDistStatsTable."

Waldbusser Standards Track [Page 35] RFC 3273 Remote Network Monitoring Management July 2002

  ::= { protocolDist 3 }

protocolDistStatsHighCapacityEntry OBJECT-TYPE

  SYNTAX     ProtocolDistStatsHighCapacityEntry
  MAX-ACCESS not-accessible
  STATUS     current
  DESCRIPTION
      "Contains the High Capacity RMON extensions to the RMON-2
      protocolDistStatsTable. These objects will be created by the
      agent for all protocolDistStatsEntries associated with
      whichever protocolDistControlEntries it deems appropriate.
      (i.e., either all protocolDistStatsHighCapacityEntries
      associated with a particular protocolDistControlEntry will be
      created, or none of them will be.)"
  INDEX { protocolDistControlIndex, protocolDirLocalIndex }
  ::= { protocolDistStatsHighCapacityTable 1 }

ProtocolDistStatsHighCapacityEntry ::= SEQUENCE {

  protocolDistStatsHighCapacityOverflowPkts   ZeroBasedCounter32,
  protocolDistStatsHighCapacityPkts           ZeroBasedCounter64,
  protocolDistStatsHighCapacityOverflowOctets ZeroBasedCounter32,
  protocolDistStatsHighCapacityOctets         ZeroBasedCounter64

}

protocolDistStatsHighCapacityOverflowPkts OBJECT-TYPE

  SYNTAX     ZeroBasedCounter32
  UNITS      "Packets"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The number of times the associated protocolDistStatsPkts
      counter has overflowed."
  ::= { protocolDistStatsHighCapacityEntry 1 }

protocolDistStatsHighCapacityPkts OBJECT-TYPE

  SYNTAX     ZeroBasedCounter64
  UNITS      "Packets"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The number of packets without errors received of this
      protocol type.  Note that this is the number of link-layer
      packets, so if a single network-layer packet is fragmented
      into several link-layer frames, this counter is incremented
      several times."
  ::= { protocolDistStatsHighCapacityEntry 2 }

protocolDistStatsHighCapacityOverflowOctets OBJECT-TYPE

Waldbusser Standards Track [Page 36] RFC 3273 Remote Network Monitoring Management July 2002

  SYNTAX     ZeroBasedCounter32
  UNITS      "Octets"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The number of times the associated protocolDistStatsOctets
      counter has overflowed."
  ::= { protocolDistStatsHighCapacityEntry 3 }

protocolDistStatsHighCapacityOctets OBJECT-TYPE

  SYNTAX     ZeroBasedCounter64
  UNITS      "Octets"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The number of octets in packets received of this protocol
      type since it was added to the protocolDistStatsTable
      (excluding framing bits but including FCS octets), except for
      those octets in packets that contained errors.
      Note this doesn't count just those octets in the particular
      protocol frames, but includes the entire packet that contained
      the protocol."
  ::= { protocolDistStatsHighCapacityEntry 4 }

– High Capacity extensions for the nlHostTable.

nlHostHighCapacityTable OBJECT-TYPE

  SYNTAX     SEQUENCE OF NlHostHighCapacityEntry
  MAX-ACCESS not-accessible
  STATUS     current
  DESCRIPTION
      "Contains the High Capacity RMON extensions to the RMON-2
      nlHostTable."
  ::= { nlHost 3 }

nlHostHighCapacityEntry OBJECT-TYPE

  SYNTAX     NlHostHighCapacityEntry
  MAX-ACCESS not-accessible
  STATUS     current
  DESCRIPTION
      "Contains the High Capacity RMON extensions to the RMON-2
      nlHostEntry. These objects will be created by the agent
      for all nlHostEntries associated with whichever
      hlHostControlEntries it deems appropriate. (i.e., either all
      nlHostHighCapacityEntries associated with a particular
      hlHostControlEntry will be created, or none of them will
      be.)"

Waldbusser Standards Track [Page 37] RFC 3273 Remote Network Monitoring Management July 2002

  INDEX { hlHostControlIndex, nlHostTimeMark,
          protocolDirLocalIndex, nlHostAddress }
  ::= { nlHostHighCapacityTable 1 }

NlHostHighCapacityEntry ::= SEQUENCE {

  nlHostHighCapacityInOverflowPkts    ZeroBasedCounter32,
  nlHostHighCapacityInPkts            ZeroBasedCounter64,
  nlHostHighCapacityOutOverflowPkts   ZeroBasedCounter32,
  nlHostHighCapacityOutPkts           ZeroBasedCounter64,
  nlHostHighCapacityInOverflowOctets  ZeroBasedCounter32,
  nlHostHighCapacityInOctets          ZeroBasedCounter64,
  nlHostHighCapacityOutOverflowOctets ZeroBasedCounter32,
  nlHostHighCapacityOutOctets         ZeroBasedCounter64

}

nlHostHighCapacityInOverflowPkts OBJECT-TYPE

  SYNTAX     ZeroBasedCounter32
  UNITS      "Packets"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The number of times the associated nlHostInPkts
      counter has overflowed."
  ::= { nlHostHighCapacityEntry 1 }

nlHostHighCapacityInPkts OBJECT-TYPE

  SYNTAX     ZeroBasedCounter64
  UNITS      "Packets"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The number of packets without errors transmitted to
      this address since it was added to the nlHostHighCapacityTable.
      Note that this is the number of link-layer packets, so if a
      single network-layer packet is fragmented into several
      link-layer frames, this counter is incremented several times."
  ::= { nlHostHighCapacityEntry 2 }

nlHostHighCapacityOutOverflowPkts OBJECT-TYPE

  SYNTAX     ZeroBasedCounter32
  UNITS      "Packets"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The number of times the associated nlHostOutPkts
      counter has overflowed."
  ::= { nlHostHighCapacityEntry 3 }

Waldbusser Standards Track [Page 38] RFC 3273 Remote Network Monitoring Management July 2002

nlHostHighCapacityOutPkts OBJECT-TYPE

  SYNTAX     ZeroBasedCounter64
  UNITS      "Packets"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The number of packets without errors transmitted by
      this address since it was added to the nlHostHighCapacityTable.
      Note that this is the number of link-layer packets, so if a
      single network-layer packet is fragmented into several
      link-layer frames, this counter is incremented several times."
  ::= { nlHostHighCapacityEntry 4 }

nlHostHighCapacityInOverflowOctets OBJECT-TYPE

  SYNTAX     ZeroBasedCounter32
  UNITS      "Octets"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The number of times the associated nlHostInOctets
      counter has overflowed."
  ::= { nlHostHighCapacityEntry 5 }

nlHostHighCapacityInOctets OBJECT-TYPE

  SYNTAX     ZeroBasedCounter64
  UNITS      "Octets"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The number of octets transmitted to this address
      since it was added to the nlHostHighCapacityTable
      (excluding framing bits but including FCS octets),
      excluding those octets in packets that contained
      errors.
      Note this doesn't count just those octets in the
      particular protocol frames, but includes the entire
      packet that contained the protocol."
  ::= { nlHostHighCapacityEntry 6 }

nlHostHighCapacityOutOverflowOctets OBJECT-TYPE

  SYNTAX     ZeroBasedCounter32
  UNITS      "Octets"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The number of times the associated nlHostOutOctets
      counter has overflowed."

Waldbusser Standards Track [Page 39] RFC 3273 Remote Network Monitoring Management July 2002

  ::= { nlHostHighCapacityEntry 7 }

nlHostHighCapacityOutOctets OBJECT-TYPE

  SYNTAX     ZeroBasedCounter64
  UNITS      "Octets"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The number of octets transmitted by this address
      since it was added to the nlHostHighCapacityTable
      (excluding framing bits but including FCS octets),
      excluding those octets in packets that contained
      errors.
      Note this doesn't count just those octets in the
      particular protocol frames, but includes the entire
      packet that contained the protocol."
  ::= { nlHostHighCapacityEntry 8 }

– High Capacity extensions for the nlMatrixTable

nlMatrixSDHighCapacityTable OBJECT-TYPE

  SYNTAX     SEQUENCE OF NlMatrixSDHighCapacityEntry
  MAX-ACCESS not-accessible
  STATUS     current
  DESCRIPTION
      "Contains the High Capacity RMON extensions to the RMON-2
      nlMatrixTable."
  ::= { nlMatrix 6 }

nlMatrixSDHighCapacityEntry OBJECT-TYPE

  SYNTAX     NlMatrixSDHighCapacityEntry
  MAX-ACCESS not-accessible
  STATUS     current
  DESCRIPTION
      "Contains the High Capacity RMON extensions to the RMON-2
      nlMatrixEntry. These objects will be created by the agent
      for all nlMatrixSDEntries associated with whichever
      hlMatrixControlEntries it deems appropriate. (i.e., either all
      nlMatrixSDHighCapacityEntries associated with a particular
      hlMatrixControlEntry will be created, or none of them will
      be.)"
  INDEX { hlMatrixControlIndex, nlMatrixSDTimeMark,
          protocolDirLocalIndex,
          nlMatrixSDSourceAddress, nlMatrixSDDestAddress }
  ::= { nlMatrixSDHighCapacityTable 1 }

NlMatrixSDHighCapacityEntry ::= SEQUENCE {

Waldbusser Standards Track [Page 40] RFC 3273 Remote Network Monitoring Management July 2002

  nlMatrixSDHighCapacityOverflowPkts   ZeroBasedCounter32,
  nlMatrixSDHighCapacityPkts           ZeroBasedCounter64,
  nlMatrixSDHighCapacityOverflowOctets ZeroBasedCounter32,
  nlMatrixSDHighCapacityOctets         ZeroBasedCounter64

}

nlMatrixSDHighCapacityOverflowPkts OBJECT-TYPE

  SYNTAX     ZeroBasedCounter32
  UNITS      "Packets"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The number of times the associated nlMatrixSDPkts
      counter has overflowed."
  ::= { nlMatrixSDHighCapacityEntry 1 }

nlMatrixSDHighCapacityPkts OBJECT-TYPE

  SYNTAX     ZeroBasedCounter64
  UNITS      "Packets"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The number of packets without errors transmitted from the
      source address to the destination address since this entry was
      added to the nlMatrixSDHighCapacityTable.  Note that this is
      the number of link-layer packets, so if a single network-layer
      packet is fragmented into several link-layer frames, this
      counter is incremented several times."
  ::= { nlMatrixSDHighCapacityEntry 2 }

nlMatrixSDHighCapacityOverflowOctets OBJECT-TYPE

  SYNTAX     ZeroBasedCounter32
  UNITS      "Octets"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The number of times the associated nlMatrixSDOctets
      counter has overflowed."
  ::= { nlMatrixSDHighCapacityEntry 3 }

nlMatrixSDHighCapacityOctets OBJECT-TYPE

  SYNTAX     ZeroBasedCounter64
  UNITS      "Octets"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The number of octets transmitted from the source address to
      the destination address since this entry was added to the

Waldbusser Standards Track [Page 41] RFC 3273 Remote Network Monitoring Management July 2002

      nlMatrixSDHighCapacityTable (excluding framing bits but
      including FCS octets), excluding those octets in packets that
      contained errors.
      Note this doesn't count just those octets in the particular
      protocol frames, but includes the entire packet that contained
      the protocol."
  ::= { nlMatrixSDHighCapacityEntry 4 }

– High Capacity extensions for the nlMatrixDSTable

nlMatrixDSHighCapacityTable OBJECT-TYPE

  SYNTAX     SEQUENCE OF NlMatrixDSHighCapacityEntry
  MAX-ACCESS not-accessible
  STATUS     current
  DESCRIPTION
      "Contains the High Capacity RMON extensions to the RMON-2
      nlMatrixDSTable."
  ::= { nlMatrix 7 }

nlMatrixDSHighCapacityEntry OBJECT-TYPE

  SYNTAX     NlMatrixDSHighCapacityEntry
  MAX-ACCESS not-accessible
  STATUS     current
  DESCRIPTION
      "Contains the High Capacity RMON extensions to the RMON-2
      nlMatrixDSEntry. These objects will be created by the agent
      for all nlMatrixDSEntries associated with whichever
      hlmatrixControlEntries it deems appropriate. (i.e., either all
      nlMatrixDSHighCapacityEntries associated with a particular
      hlMatrixControlEntry will be created, or none of them will
      be.)"
  INDEX { hlMatrixControlIndex, nlMatrixDSTimeMark,
          protocolDirLocalIndex,
          nlMatrixDSDestAddress, nlMatrixDSSourceAddress }
  ::= { nlMatrixDSHighCapacityTable 1 }

NlMatrixDSHighCapacityEntry ::= SEQUENCE {

  nlMatrixDSHighCapacityOverflowPkts   ZeroBasedCounter32,
  nlMatrixDSHighCapacityPkts           ZeroBasedCounter64,
  nlMatrixDSHighCapacityOverflowOctets ZeroBasedCounter32,
  nlMatrixDSHighCapacityOctets         ZeroBasedCounter64

}

nlMatrixDSHighCapacityOverflowPkts OBJECT-TYPE

  SYNTAX     ZeroBasedCounter32
  UNITS      "Packets"
  MAX-ACCESS read-only

Waldbusser Standards Track [Page 42] RFC 3273 Remote Network Monitoring Management July 2002

  STATUS     current
  DESCRIPTION
      "The number of times the associated nlMatrixDSPkts
      counter has overflowed."
  ::= { nlMatrixDSHighCapacityEntry 1 }

nlMatrixDSHighCapacityPkts OBJECT-TYPE

  SYNTAX     ZeroBasedCounter64
  UNITS      "Packets"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The number of packets without errors transmitted from the
      source address to the destination address since this entry was
      added to the nlMatrixDSHighCapacityTable.  Note that this is
      the number of link-layer packets, so if a single network-layer
      packet is fragmented into several link-layer frames, this
      counter is incremented several times."
  ::= { nlMatrixDSHighCapacityEntry 2 }

nlMatrixDSHighCapacityOverflowOctets OBJECT-TYPE

  SYNTAX     ZeroBasedCounter32
  UNITS      "Octets"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The number of times the associated nlMatrixDSOctets
      counter has overflowed."
  ::= { nlMatrixDSHighCapacityEntry 3 }

nlMatrixDSHighCapacityOctets OBJECT-TYPE

  SYNTAX     ZeroBasedCounter64
  UNITS      "Octets"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The number of octets transmitted from the source address
      to the destination address since this entry was added to the
      nlMatrixDSHighCapacityTable (excluding framing bits but
      including FCS octets), excluding those octets in packets that
      contained errors.
      Note this doesn't count just those octets in the particular
      protocol frames, but includes the entire packet that contained
      the protocol."
  ::= { nlMatrixDSHighCapacityEntry 4 }

– High Capacity extensions for the nlMatrixTopNTable

Waldbusser Standards Track [Page 43] RFC 3273 Remote Network Monitoring Management July 2002

nlMatrixTopNHighCapacityTable OBJECT-TYPE

  SYNTAX     SEQUENCE OF NlMatrixTopNHighCapacityEntry
  MAX-ACCESS not-accessible
  STATUS     current
  DESCRIPTION
      "Contains the High Capacity RMON extensions to the RMON-2
      nlMatrixTopNTable when nlMatrixTopNControlRateBase specifies
      a High Capacity TopN Report."
  ::= { nlMatrix 8 }

nlMatrixTopNHighCapacityEntry OBJECT-TYPE

  SYNTAX     NlMatrixTopNHighCapacityEntry
  MAX-ACCESS not-accessible
  STATUS     current
  DESCRIPTION
      "Contains the High Capacity RMON extensions to the RMON-2
      nlMatrixTopNEntry when nlMatrixTopNControlRateBase specifies
      a High Capacity TopN Report. These objects will be created by
      the agent for all nlMatrixTopNEntries associated with whichever
      nlMatrixTopNControlEntries have a nlMatrixTopNControlRateBase
      that specify a high capacity report."
  INDEX { nlMatrixTopNControlIndex, nlMatrixTopNIndex }
  ::= { nlMatrixTopNHighCapacityTable 1 }

NlMatrixTopNHighCapacityEntry ::= SEQUENCE {

nlMatrixTopNHighCapacityProtocolDirLocalIndex    Integer32,
nlMatrixTopNHighCapacitySourceAddress            OCTET STRING,
nlMatrixTopNHighCapacityDestAddress              OCTET STRING,
nlMatrixTopNHighCapacityBasePktRate              Gauge32,
nlMatrixTopNHighCapacityOverflowPktRate          Gauge32,
nlMatrixTopNHighCapacityPktRate                  CounterBasedGauge64,
nlMatrixTopNHighCapacityReverseBasePktRate       Gauge32,
nlMatrixTopNHighCapacityReverseOverflowPktRate   Gauge32,
nlMatrixTopNHighCapacityReversePktRate           CounterBasedGauge64,
nlMatrixTopNHighCapacityBaseOctetRate            Gauge32,
nlMatrixTopNHighCapacityOverflowOctetRate        Gauge32,
nlMatrixTopNHighCapacityOctetRate                CounterBasedGauge64,
nlMatrixTopNHighCapacityReverseBaseOctetRate     Gauge32,
nlMatrixTopNHighCapacityReverseOverflowOctetRate Gauge32,
nlMatrixTopNHighCapacityReverseOctetRate         CounterBasedGauge64

}

nlMatrixTopNHighCapacityProtocolDirLocalIndex OBJECT-TYPE

  SYNTAX     Integer32 (1..2147483647)
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The protocolDirLocalIndex of the network layer protocol of

Waldbusser Standards Track [Page 44] RFC 3273 Remote Network Monitoring Management July 2002

      this entry's network address."
  ::= { nlMatrixTopNHighCapacityEntry 1 }

nlMatrixTopNHighCapacitySourceAddress OBJECT-TYPE

  SYNTAX     OCTET STRING
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The network layer address of the source host in this
      conversation.
      This is represented as an octet string with
      specific semantics and length as identified
      by the associated nlMatrixTopNProtocolDirLocalIndex.
      For example, if the protocolDirLocalIndex indicates an
      encapsulation of ip, this object is encoded as a length
      octet of 4, followed by the 4 octets of the ip address,
      in network byte order."
  ::= { nlMatrixTopNHighCapacityEntry 2 }

nlMatrixTopNHighCapacityDestAddress OBJECT-TYPE

  SYNTAX     OCTET STRING
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The network layer address of the destination host in this
      conversation.
      This is represented as an octet string with
      specific semantics and length as identified
      by the associated nlMatrixTopNProtocolDirLocalIndex.
      For example, if the nlMatrixTopNProtocolDirLocalIndex
      indicates an encapsulation of ip, this object is encoded as a
      length octet of 4, followed by the 4 octets of the ip address,
      in network byte order."
  ::= { nlMatrixTopNHighCapacityEntry 3 }

nlMatrixTopNHighCapacityBasePktRate OBJECT-TYPE

  SYNTAX     Gauge32
  UNITS      "Packets"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The number of packets seen from the source host
      to the destination host during this sampling interval,
      modulo 2^32, counted using the rules for counting the

Waldbusser Standards Track [Page 45] RFC 3273 Remote Network Monitoring Management July 2002

      nlMatrixSDPkts object."
  ::= { nlMatrixTopNHighCapacityEntry 4 }

nlMatrixTopNHighCapacityOverflowPktRate OBJECT-TYPE

  SYNTAX     Gauge32
  UNITS      "Packets"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The number of packets seen from the source host
      to the destination host during this sampling interval,
      divided by 2^32, truncating fractions (i.e., X DIV 2^32),
      and counted using the rules for counting the
      nlMatrixSDPkts object."
  ::= { nlMatrixTopNHighCapacityEntry 5 }

nlMatrixTopNHighCapacityPktRate OBJECT-TYPE

  SYNTAX     CounterBasedGauge64
  UNITS      "Packets"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The number of packets seen from the source host to the
      destination host during this sampling interval, counted
      using the rules for counting the nlMatrixSDPkts object.
      If the value of nlMatrixTopNControlRateBase is
      nlMatrixTopNHighCapacityPkts, this variable will be
      used to sort this report."
  ::= { nlMatrixTopNHighCapacityEntry 6 }

nlMatrixTopNHighCapacityReverseBasePktRate OBJECT-TYPE

  SYNTAX     Gauge32
  UNITS      "Packets"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The number of packets seen from the destination host to the
      source host during this sampling interval, modulo 2^32, counted
      using the rules for counting the nlMatrixSDPkts object (note
      that the corresponding nlMatrixSDPkts object selected is the
      one whose source address is equal to nlMatrixTopNDestAddress
      and whose destination address is equal to
      nlMatrixTopNSourceAddress.)
      Note that if the value of nlMatrixTopNControlRateBase is equal
      to nlMatrixTopNHighCapacityPkts, the sort of topN entries is
      based entirely on nlMatrixTopNHighCapacityPktRate, and not on
      the value of this object."

Waldbusser Standards Track [Page 46] RFC 3273 Remote Network Monitoring Management July 2002

  ::= { nlMatrixTopNHighCapacityEntry 7 }

nlMatrixTopNHighCapacityReverseOverflowPktRate OBJECT-TYPE

  SYNTAX     Gauge32
  UNITS      "Packets"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The number of packets seen from the destination host to the
      source host during this sampling interval, divided by 2^32,
      truncating fractions (i.e., X DIV 2^32), and counted
      using the rules for counting the nlMatrixSDPkts object (note
      that the corresponding nlMatrixSDPkts object selected is the
      one whose source address is equal to nlMatrixTopNDestAddress
      and whose destination address is equal to
      nlMatrixTopNSourceAddress.)
      Note that if the value of nlMatrixTopNControlRateBase is equal
      to nlMatrixTopNHighCapacityPkts, the sort of topN entries is
      based entirely on nlMatrixTopNHighCapacityPktRate, and not on
      the value of this object."
  ::= { nlMatrixTopNHighCapacityEntry 8 }

nlMatrixTopNHighCapacityReversePktRate OBJECT-TYPE

  SYNTAX     CounterBasedGauge64
  UNITS      "Packets"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The number of packets seen from the destination host to the
      source host during this sampling interval, counted
      using the rules for counting the nlMatrixSDPkts object (note
      that the corresponding nlMatrixSDPkts object selected is the
      one whose source address is equal to nlMatrixTopNDestAddress
      and whose destination address is equal to
      nlMatrixTopNSourceAddress.)
      Note that if the value of nlMatrixTopNControlRateBase is equal
      to nlMatrixTopNHighCapacityPkts, the sort of topN entries is
      based entirely on nlMatrixTopNHighCapacityPktRate, and not on
      the value of this object."
  ::= { nlMatrixTopNHighCapacityEntry 9 }

nlMatrixTopNHighCapacityBaseOctetRate OBJECT-TYPE

  SYNTAX     Gauge32
  UNITS      "Octets"
  MAX-ACCESS read-only
  STATUS     current

Waldbusser Standards Track [Page 47] RFC 3273 Remote Network Monitoring Management July 2002

  DESCRIPTION
      "The number of octets seen from the source host to the
      destination host during this sampling interval, modulo 2^32,
      counted using the rules for counting the nlMatrixSDOctets
      object."
  ::= { nlMatrixTopNHighCapacityEntry 10 }

nlMatrixTopNHighCapacityOverflowOctetRate OBJECT-TYPE

  SYNTAX     Gauge32
  UNITS      "Octets"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The number of octets seen from the source host
      to the destination host during this sampling interval,
      divided by 2^32, truncating fractions (i.e., X DIV 2^32),
      and counted using the rules for counting the
      nlMatrixSDOctets object."
  ::= { nlMatrixTopNHighCapacityEntry 11 }

nlMatrixTopNHighCapacityOctetRate OBJECT-TYPE

  SYNTAX     CounterBasedGauge64
  UNITS      "Octets"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The number of octets seen from the source host
      to the destination host during this sampling interval,
      counted using the rules for counting the
      nlMatrixSDOctets object.
      If the value of nlMatrixTopNControlRateBase is
      nlMatrixTopNHighCapacityOctets, this variable will be used
      to sort this report."
  ::= { nlMatrixTopNHighCapacityEntry 12 }

nlMatrixTopNHighCapacityReverseBaseOctetRate OBJECT-TYPE

  SYNTAX     Gauge32
  UNITS      "Octets"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The number of octets seen from the destination host to the
      source host during this sampling interval, modulo 2^32, counted
      using the rules for counting the nlMatrixSDOctets object (note
      that the corresponding nlMatrixSDOctets object selected is the
      one whose source address is equal to nlMatrixTopNDestAddress
      and whose destination address is equal to
      nlMatrixTopNSourceAddress.)

Waldbusser Standards Track [Page 48] RFC 3273 Remote Network Monitoring Management July 2002

      Note that if the value of nlMatrixTopNControlRateBase is equal
      to nlMatrixTopNHighCapacityOctets, the sort of topN entries is
      based entirely on nlMatrixTopNHighCapacityOctetRate, and not on
      the value of this object."
  ::= { nlMatrixTopNHighCapacityEntry 13 }

nlMatrixTopNHighCapacityReverseOverflowOctetRate OBJECT-TYPE

  SYNTAX     Gauge32
  UNITS      "Octets"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The number of octets seen from the destination host to the
      source host during this sampling interval, divided by 2^32,
      truncating fractions (i.e., X DIV 2^32), and counted
      using the rules for counting the nlMatrixSDOctets object (note
      that the corresponding nlMatrixSDOctets object selected is the
      one whose source address is equal to nlMatrixTopNDestAddress
      and whose destination address is equal to
      nlMatrixTopNSourceAddress.)
      Note that if the value of nlMatrixTopNControlRateBase is equal
      to nlMatrixTopNHighCapacityOctets, the sort of topN entries is
      based entirely on nlMatrixTopNHighCapacityOctetRate, and not on
      the value of this object."
  ::= { nlMatrixTopNHighCapacityEntry 14 }

nlMatrixTopNHighCapacityReverseOctetRate OBJECT-TYPE

  SYNTAX     CounterBasedGauge64
  UNITS      "Octets"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The number of octets seen from the destination host to the
      source host during this sampling interval, counted
      using the rules for counting the nlMatrixSDOctets object (note
      that the corresponding nlMatrixSDOctets object selected is the
      one whose source address is equal to nlMatrixTopNDestAddress
      and whose destination address is equal to
      nlMatrixTopNSourceAddress.)
      Note that if the value of nlMatrixTopNControlRateBase is equal
      to nlMatrixTopNHighCapacityOctets, the sort of topN entries is
      based entirely on nlMatrixTopNHighCapacityOctetRate, and not on
      the value of this object."
  ::= { nlMatrixTopNHighCapacityEntry 15 }

– High Capacity extensions for the alHostTable

Waldbusser Standards Track [Page 49] RFC 3273 Remote Network Monitoring Management July 2002

alHostHighCapacityTable OBJECT-TYPE

  SYNTAX     SEQUENCE OF AlHostHighCapacityEntry
  MAX-ACCESS not-accessible
  STATUS     current
  DESCRIPTION
      "Contains the High Capacity RMON extensions to the RMON-2
      alHostTable."
  ::= { alHost 2 }

alHostHighCapacityEntry OBJECT-TYPE

  SYNTAX     AlHostHighCapacityEntry
  MAX-ACCESS not-accessible
  STATUS     current
  DESCRIPTION
      "Contains the High Capacity RMON extensions to the RMON-2
      alHostEntry. These objects will be created by the agent
      for all alHostEntries associated with whichever
      hlHostControlEntries it deems appropriate. (i.e., either all
      alHostHighCapacityEntries associated with a particular
      hlHostControlEntry will be created, or none of them will
      be.)"
  INDEX { hlHostControlIndex, alHostTimeMark,
          protocolDirLocalIndex, nlHostAddress,
          protocolDirLocalIndex }
  ::= { alHostHighCapacityTable 1 }

AlHostHighCapacityEntry ::= SEQUENCE {

  alHostHighCapacityInOverflowPkts    ZeroBasedCounter32,
  alHostHighCapacityInPkts            ZeroBasedCounter64,
  alHostHighCapacityOutOverflowPkts   ZeroBasedCounter32,
  alHostHighCapacityOutPkts           ZeroBasedCounter64,
  alHostHighCapacityInOverflowOctets  ZeroBasedCounter32,
  alHostHighCapacityInOctets          ZeroBasedCounter64,
  alHostHighCapacityOutOverflowOctets ZeroBasedCounter32,
  alHostHighCapacityOutOctets         ZeroBasedCounter64

}

alHostHighCapacityInOverflowPkts OBJECT-TYPE

  SYNTAX     ZeroBasedCounter32
  UNITS      "Packets"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The number of times the associated alHostInPkts
      counter has overflowed."
  ::= { alHostHighCapacityEntry 1 }

Waldbusser Standards Track [Page 50] RFC 3273 Remote Network Monitoring Management July 2002

alHostHighCapacityInPkts OBJECT-TYPE

  SYNTAX     ZeroBasedCounter64
  UNITS      "Packets"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The number of packets of this protocol type without errors
      transmitted to this address since it was added to the
      alHostHighCapacityTable.  Note that this is the number of
      link-layer packets, so if a single network-layer packet
      is fragmented into several link-layer frames, this counter
      is incremented several times."
  ::= { alHostHighCapacityEntry 2 }

alHostHighCapacityOutOverflowPkts OBJECT-TYPE

  SYNTAX     ZeroBasedCounter32
  UNITS      "Packets"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The number of times the associated alHostOutPkts
      counter has overflowed."
  ::= { alHostHighCapacityEntry 3 }

alHostHighCapacityOutPkts OBJECT-TYPE

  SYNTAX     ZeroBasedCounter64
  UNITS      "Packets"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The number of packets of this protocol type without errors
      transmitted by this address since it was added to the
      alHostHighCapacityTable.  Note that this is the number of
      link-layer packets, so if a single network-layer packet
      is fragmented into several link-layer frames, this counter
      is incremented several times."
  ::= { alHostHighCapacityEntry 4 }

alHostHighCapacityInOverflowOctets OBJECT-TYPE

  SYNTAX     ZeroBasedCounter32
  UNITS      "Octets"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The number of times the associated alHostInOctets
      counter has overflowed."
  ::= { alHostHighCapacityEntry 5 }

Waldbusser Standards Track [Page 51] RFC 3273 Remote Network Monitoring Management July 2002

alHostHighCapacityInOctets OBJECT-TYPE

  SYNTAX     ZeroBasedCounter64
  UNITS      "Octets"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The number of octets transmitted to this address
      of this protocol type since it was added to the
      alHostHighCapacityTable (excluding framing bits but
      including FCS octets), excluding those octets in
      packets that contained errors.
      Note this doesn't count just those octets in the particular
      protocol frames, but includes the entire packet that contained
      the protocol."
  ::= { alHostHighCapacityEntry 6 }

alHostHighCapacityOutOverflowOctets OBJECT-TYPE

  SYNTAX     ZeroBasedCounter32
  UNITS      "Octets"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The number of times the associated alHostOutOctets
      counter has overflowed."
  ::= { alHostHighCapacityEntry 7 }

alHostHighCapacityOutOctets OBJECT-TYPE

  SYNTAX     ZeroBasedCounter64
  UNITS      "Octets"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The number of octets transmitted by this address
      of this protocol type since it was added to the
      alHostHighCapacityTable (excluding framing bits but
      including FCS octets), excluding those octets in
      packets that contained errors.
      Note this doesn't count just those octets in the particular
      protocol frames, but includes the entire packet that contained
      the protocol."
  ::= { alHostHighCapacityEntry 8 }

– High Capacity extensions for the alMatrixSDTable

alMatrixSDHighCapacityTable OBJECT-TYPE

  SYNTAX     SEQUENCE OF AlMatrixSDHighCapacityEntry

Waldbusser Standards Track [Page 52] RFC 3273 Remote Network Monitoring Management July 2002

  MAX-ACCESS not-accessible
  STATUS     current
  DESCRIPTION
      "Contains the High Capacity RMON extensions to the RMON-2
      alMatrixSDTable."
  ::= { alMatrix 5 }

alMatrixSDHighCapacityEntry OBJECT-TYPE

  SYNTAX     AlMatrixSDHighCapacityEntry
  MAX-ACCESS not-accessible
  STATUS     current
  DESCRIPTION
      "Contains the High Capacity RMON extensions to the RMON-2
      alMatrixSDEntry. These objects will be created by the agent
      for all alMatrixSDEntries associated with whichever
      hlMatrixControlEntries it deems appropriate. (i.e., either all
      alMatrixSDHighCapacityEntries associated with a particular
      hlMatrixControlEntry will be created, or none of them will
      be.)"
  INDEX { hlMatrixControlIndex, alMatrixSDTimeMark,
          protocolDirLocalIndex,
          nlMatrixSDSourceAddress, nlMatrixSDDestAddress,
          protocolDirLocalIndex }
  ::= { alMatrixSDHighCapacityTable 1 }

AlMatrixSDHighCapacityEntry ::= SEQUENCE {

  alMatrixSDHighCapacityOverflowPkts   ZeroBasedCounter32,
  alMatrixSDHighCapacityPkts           ZeroBasedCounter64,
  alMatrixSDHighCapacityOverflowOctets ZeroBasedCounter32,
  alMatrixSDHighCapacityOctets         ZeroBasedCounter64

}

alMatrixSDHighCapacityOverflowPkts OBJECT-TYPE

  SYNTAX     ZeroBasedCounter32
  UNITS      "Packets"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The number of times the associated alMatrixSDPkts
      counter has overflowed."
  ::= { alMatrixSDHighCapacityEntry 1 }

alMatrixSDHighCapacityPkts OBJECT-TYPE

  SYNTAX     ZeroBasedCounter64
  UNITS      "Packets"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION

Waldbusser Standards Track [Page 53] RFC 3273 Remote Network Monitoring Management July 2002

      "The number of good packets of this protocol type
      transmitted from the source address to the destination address
      since this entry was added to the alMatrixSDHighCapacityTable.
      Note that this is the number of link-layer packets, so if a
      single network-layer packet is fragmented into several
      link-layer frames, this counter is incremented several times."
  ::= { alMatrixSDHighCapacityEntry 2 }

alMatrixSDHighCapacityOverflowOctets OBJECT-TYPE

  SYNTAX     ZeroBasedCounter32
  UNITS      "Octets"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The number of times the associated alMatrixSDOctets
      counter has overflowed."
  ::= { alMatrixSDHighCapacityEntry 3 }

alMatrixSDHighCapacityOctets OBJECT-TYPE

  SYNTAX     ZeroBasedCounter64
  UNITS      "Octets"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The number of octets in good packets of this protocol type
      transmitted from the source address to the destination address
      since this entry was added to the alMatrixSDHighCapacityTable
      (excluding framing bits but including FCS octets).
      Note this doesn't count just those octets in the particular
      protocol frames, but includes the entire packet that contained
      the protocol."
  ::= { alMatrixSDHighCapacityEntry 4 }

– High Capacity extensions for the alMatrixDSTable

alMatrixDSHighCapacityTable OBJECT-TYPE

  SYNTAX     SEQUENCE OF AlMatrixDSHighCapacityEntry
  MAX-ACCESS not-accessible
  STATUS     current
  DESCRIPTION
      "Contains the High Capacity RMON extensions to the RMON-2
      alMatrixDSTable."
  ::= { alMatrix 6 }

alMatrixDSHighCapacityEntry OBJECT-TYPE

  SYNTAX     AlMatrixDSHighCapacityEntry
  MAX-ACCESS not-accessible

Waldbusser Standards Track [Page 54] RFC 3273 Remote Network Monitoring Management July 2002

  STATUS     current
  DESCRIPTION
      "Contains the High Capacity RMON extensions to the RMON-2
      alMatrixSDTable. These objects will be created by the agent
      for all alMatrixDSEntries associated with whichever
      hlMatrixControlEntries it deems appropriate. (i.e., either all
      alMatrixDSHighCapacityEntries associated with a particular
      hlMatrixControlEntry will be created, or none of them will
      be.)"
  INDEX { hlMatrixControlIndex, alMatrixDSTimeMark,
          protocolDirLocalIndex,
          nlMatrixDSDestAddress, nlMatrixDSSourceAddress,
          protocolDirLocalIndex }
  ::= { alMatrixDSHighCapacityTable 1 }

AlMatrixDSHighCapacityEntry ::= SEQUENCE {

  alMatrixDSHighCapacityOverflowPkts   ZeroBasedCounter32,
  alMatrixDSHighCapacityPkts           ZeroBasedCounter64,
  alMatrixDSHighCapacityOverflowOctets ZeroBasedCounter32,
  alMatrixDSHighCapacityOctets         ZeroBasedCounter64

}

alMatrixDSHighCapacityOverflowPkts OBJECT-TYPE

  SYNTAX     ZeroBasedCounter32
  UNITS      "Packets"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The number of times the associated alMatrixDSPkts
      counter has overflowed."
  ::= { alMatrixDSHighCapacityEntry 1 }

alMatrixDSHighCapacityPkts OBJECT-TYPE

  SYNTAX     ZeroBasedCounter64
  UNITS      "Packets"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The number of good packets of this protocol type
      transmitted from the source address to the destination address
      since this entry was added to the alMatrixDSHighCapacityTable.
      Note that this is the number of link-layer packets, so if a
      single network-layer packet is fragmented into several
      link-layer frames, this counter is incremented several times."
  ::= { alMatrixDSHighCapacityEntry 2 }

alMatrixDSHighCapacityOverflowOctets OBJECT-TYPE

  SYNTAX     ZeroBasedCounter32

Waldbusser Standards Track [Page 55] RFC 3273 Remote Network Monitoring Management July 2002

  UNITS      "Octets"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The number of times the associated alMatrixDSOctets
      counter has overflowed."
  ::= { alMatrixDSHighCapacityEntry 3 }

alMatrixDSHighCapacityOctets OBJECT-TYPE

  SYNTAX     ZeroBasedCounter64
  UNITS      "Octets"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The number of octets in good packets of this protocol type
      transmitted from the source address to the destination address
      since this entry was added to the alMatrixDSHighCapacityTable
      (excluding framing bits but including FCS octets).
      Note this doesn't count just those octets in the particular
      protocol frames, but includes the entire packet that contained
      the protocol."
  ::= { alMatrixDSHighCapacityEntry 4 }

alMatrixTopNHighCapacityTable OBJECT-TYPE

  SYNTAX     SEQUENCE OF AlMatrixTopNHighCapacityEntry
  MAX-ACCESS not-accessible
  STATUS     current
  DESCRIPTION
      "Contains the High Capacity RMON extensions to the RMON-2
      alMatrixTopNTable when alMatrixTopNControlRateBase specifies
      a High Capacity TopN Report."
  ::= { alMatrix 7 }

alMatrixTopNHighCapacityEntry OBJECT-TYPE

  SYNTAX     AlMatrixTopNHighCapacityEntry
  MAX-ACCESS not-accessible
  STATUS     current
  DESCRIPTION
      "Contains the High Capacity RMON extensions to the RMON-2
      alMatrixTopNEntry when alMatrixTopNControlRateBase specifies
      a High Capacity TopN Report. These objects will be created by
      the agent for all alMatrixTopNEntries associated with whichever
      alMatrixTopNControlEntries have a alMatrixTopNControlRateBase
      that specify a high capacity report."
   INDEX { alMatrixTopNControlIndex, alMatrixTopNIndex }
  ::= { alMatrixTopNHighCapacityTable 1 }

Waldbusser Standards Track [Page 56] RFC 3273 Remote Network Monitoring Management July 2002

AlMatrixTopNHighCapacityEntry ::= SEQUENCE {

alMatrixTopNHighCapacityProtocolDirLocalIndex    Integer32,
alMatrixTopNHighCapacitySourceAddress            OCTET STRING,
alMatrixTopNHighCapacityDestAddress              OCTET STRING,
alMatrixTopNHighCapacityAppProtocolDirLocalIndex Integer32,
alMatrixTopNHighCapacityBasePktRate              Gauge32,
alMatrixTopNHighCapacityOverflowPktRate          Gauge32,
alMatrixTopNHighCapacityPktRate                  CounterBasedGauge64,
alMatrixTopNHighCapacityReverseBasePktRate       Gauge32,
alMatrixTopNHighCapacityReverseOverflowPktRate   Gauge32,
alMatrixTopNHighCapacityReversePktRate           CounterBasedGauge64,
alMatrixTopNHighCapacityBaseOctetRate            Gauge32,
alMatrixTopNHighCapacityOverflowOctetRate        Gauge32,
alMatrixTopNHighCapacityOctetRate                CounterBasedGauge64,
alMatrixTopNHighCapacityReverseBaseOctetRate     Gauge32,
alMatrixTopNHighCapacityReverseOverflowOctetRate Gauge32,
alMatrixTopNHighCapacityReverseOctetRate         CounterBasedGauge64

}

alMatrixTopNHighCapacityProtocolDirLocalIndex OBJECT-TYPE

  SYNTAX     Integer32 (1..2147483647)
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The protocolDirLocalIndex of the network layer protocol of
      this entry's network address."
  ::= { alMatrixTopNHighCapacityEntry 1 }

alMatrixTopNHighCapacitySourceAddress OBJECT-TYPE

  SYNTAX     OCTET STRING
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The network layer address of the source host in this
      conversation.
      This is represented as an octet string with
      specific semantics and length as identified
      by the associated alMatrixTopNProtocolDirLocalIndex.
      For example, if the alMatrixTopNProtocolDirLocalIndex
      indicates an encapsulation of ip, this object is encoded as a
      length octet of 4, followed by the 4 octets of the ip address,
      in network byte order."
  ::= { alMatrixTopNHighCapacityEntry 2 }

alMatrixTopNHighCapacityDestAddress OBJECT-TYPE

  SYNTAX     OCTET STRING

Waldbusser Standards Track [Page 57] RFC 3273 Remote Network Monitoring Management July 2002

  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The network layer address of the destination host in this
      conversation.
      This is represented as an octet string with
      specific semantics and length as identified
      by the associated alMatrixTopNProtocolDirLocalIndex.
      For example, if the alMatrixTopNProtocolDirLocalIndex
      indicates an encapsulation of ip, this object is encoded as a
      length octet of 4, followed by the 4 octets of the ip address,
      in network byte order."
  ::= { alMatrixTopNHighCapacityEntry 3 }

alMatrixTopNHighCapacityAppProtocolDirLocalIndex OBJECT-TYPE

  SYNTAX     Integer32
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The type of the protocol counted by this entry."
  ::= { alMatrixTopNHighCapacityEntry 4 }

alMatrixTopNHighCapacityBasePktRate OBJECT-TYPE

  SYNTAX     Gauge32
  UNITS      "Packets"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The number of packets seen of this protocol from the
      source host to the destination host during this sampling
      interval, modulo 2^32, counted using the rules for counting
      the alMatrixSDPkts object."
  ::= { alMatrixTopNHighCapacityEntry 5 }

alMatrixTopNHighCapacityOverflowPktRate OBJECT-TYPE

  SYNTAX     Gauge32
  UNITS      "Packets"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The number of packets seen of this protocol from the source
      host to the destination host during this sampling interval,
      divided by 2^32, truncating fractions (i.e., X DIV 2^32),
      and counted using the rules for counting the
      alMatrixSDPkts object."
  ::= { alMatrixTopNHighCapacityEntry 6 }

Waldbusser Standards Track [Page 58] RFC 3273 Remote Network Monitoring Management July 2002

alMatrixTopNHighCapacityPktRate OBJECT-TYPE

  SYNTAX     CounterBasedGauge64
  UNITS      "Packets"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The number of packets seen of this protocol from the source
      host to the destination host during this sampling interval,
      counted using the rules for counting the
      alMatrixSDPkts object.
      If the value of alMatrixTopNControlRateBase is
      alMatrixTopNTerminalsPkts, alMatrixTopNAllPkts,
      alMatrixTopNTerminalsHighCapacityPkts, or
      alMatrixTopNAllHighCapacityPkts, this variable will be used
      to sort this report."
  ::= { alMatrixTopNHighCapacityEntry 7 }

alMatrixTopNHighCapacityReverseBasePktRate OBJECT-TYPE

  SYNTAX     Gauge32
  UNITS      "Packets"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The number of packets seen of this protocol from the
      destination host to the source host during this sampling
      interval, modulo 2^32, counted using the rules for counting
      the alMatrixSDPkts object (note that the corresponding
      alMatrixSDPkts object selected is the one whose source address
      is equal to alMatrixTopNDestAddress and whose destination
      address is equal to alMatrixTopNSourceAddress.)"
  ::= { alMatrixTopNHighCapacityEntry 8 }

alMatrixTopNHighCapacityReverseOverflowPktRate OBJECT-TYPE

  SYNTAX     Gauge32
  UNITS      "Packets"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The number of packets seen of this protocol from the
      destination host to the source host during this sampling
      interval, divided by 2^32, truncating fractions
      (i.e., X DIV 2^32), and counted using the rules for
      counting the alMatrixSDPkts object (note that the
      corresponding alMatrixSDPkts object selected is the
      one whose source address is equal to alMatrixTopNDestAddress
      and whose destination address is equal to
      alMatrixTopNSourceAddress.)"
  ::= { alMatrixTopNHighCapacityEntry 9 }

Waldbusser Standards Track [Page 59] RFC 3273 Remote Network Monitoring Management July 2002

alMatrixTopNHighCapacityReversePktRate OBJECT-TYPE

  SYNTAX     CounterBasedGauge64
  UNITS      "Packets"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The number of packets seen of this protocol from the
      destination host to the source host during this sampling
      interval, counted using the rules for counting the
      alMatrixSDPkts object (note that the corresponding
      alMatrixSDPkts object selected is the one whose source address
      is equal to alMatrixTopNDestAddress and whose destination
      address is equal to alMatrixTopNSourceAddress.)"
  ::= { alMatrixTopNHighCapacityEntry 10 }

alMatrixTopNHighCapacityBaseOctetRate OBJECT-TYPE

  SYNTAX     Gauge32
  UNITS      "Octets"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The number of octets seen of this protocol from the source host
      to the destination host during this sampling interval,
      modulo 2^32, counted using the rules for counting the
      alMatrixSDOctets object."
  ::= { alMatrixTopNHighCapacityEntry 11 }

alMatrixTopNHighCapacityOverflowOctetRate OBJECT-TYPE

  SYNTAX     Gauge32
  UNITS      "Octets"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The number of octets seen of this protocol from the source host
      to the destination host during this sampling interval,
      divided by 2^32, truncating fractions (i.e., X DIV 2^32),
      and counted using the rules for counting the
      alMatrixSDOctets object."
  ::= { alMatrixTopNHighCapacityEntry 12 }

alMatrixTopNHighCapacityOctetRate OBJECT-TYPE

  SYNTAX     CounterBasedGauge64
  UNITS      "Octets"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The number of octets seen of this protocol from the source host
      to the destination host during this sampling interval,

Waldbusser Standards Track [Page 60] RFC 3273 Remote Network Monitoring Management July 2002

      counted using the rules for counting the
      alMatrixSDOctets object.
      If the value of alMatrixTopNControlRateBase is
      alMatrixTopNTerminalsOctets, alMatrixTopNAllOctets,
      alMatrixTopNTerminalsHighCapacityOctets, or
      alMatrixTopNAllHighCapacityOctets, this variable will be used
      to sort this report."
  ::= { alMatrixTopNHighCapacityEntry 13 }

alMatrixTopNHighCapacityReverseBaseOctetRate OBJECT-TYPE

  SYNTAX     Gauge32
  UNITS      "Octets"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The number of octets seen of this protocol from the
      destination host to the source host during this sampling
      interval, modulo 2^32, counted using the rules for counting
      the alMatrixSDOctets object (note that the corresponding
      alMatrixSDOctets object selected is the one whose source
      address is equal to alMatrixTopNDestAddress and whose
      destination address is equal to alMatrixTopNSourceAddress.)"
  ::= { alMatrixTopNHighCapacityEntry 14 }

alMatrixTopNHighCapacityReverseOverflowOctetRate OBJECT-TYPE

  SYNTAX     Gauge32
  UNITS      "Octets"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The number of octets seen of this protocol from the
      destination host to the source host during this sampling
      interval, divided by 2^32, truncating fractions (i.e., X DIV
      2^32), and counted using the rules for counting the
      alMatrixSDOctets object (note that the corresponding
      alMatrixSDOctets object selected is the one whose source
      address is equal to alMatrixTopNDestAddress and whose
      destination address is equal to alMatrixTopNSourceAddress.)"
  ::= { alMatrixTopNHighCapacityEntry 15 }

alMatrixTopNHighCapacityReverseOctetRate OBJECT-TYPE

  SYNTAX     CounterBasedGauge64
  UNITS      "Octets"
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The number of octets seen of this protocol from the
      destination host to the source host during this sampling

Waldbusser Standards Track [Page 61] RFC 3273 Remote Network Monitoring Management July 2002

      interval, counted using the rules for counting the
      alMatrixSDOctets object (note that the corresponding
      alMatrixSDOctets object selected is the one whose source
      address is equal to alMatrixTopNDestAddress and whose
      destination address is equal to alMatrixTopNSourceAddress.)"
  ::= { alMatrixTopNHighCapacityEntry 16 }

usrHistoryHighCapacityTable OBJECT-TYPE

  SYNTAX SEQUENCE OF UsrHistoryHighCapacityEntry
  MAX-ACCESS not-accessible
  STATUS     current
  DESCRIPTION
      "Contains the High Capacity RMON extensions to the RMON-2
      usrHistoryTable."
      ::= { usrHistory 4 }

usrHistoryHighCapacityEntry OBJECT-TYPE

  SYNTAX UsrHistoryHighCapacityEntry
  MAX-ACCESS not-accessible
  STATUS  current
  DESCRIPTION
      "Contains the High Capacity RMON extensions to the RMON-2
      usrHistoryEntry. These objects will be created by the agent
      for all usrHistoryEntries associated with whichever
      usrHistoryControlEntries it deems appropriate. (i.e., either all
      usrHistoryHighCapacityEntries associated with a particular
      usrHistoryControlEntry will be created, or none of them will
      be.)"
  INDEX { usrHistoryControlIndex, usrHistorySampleIndex,
          usrHistoryObjectIndex }
  ::= { usrHistoryHighCapacityTable 1 }

UsrHistoryHighCapacityEntry ::= SEQUENCE {

  usrHistoryHighCapacityOverflowAbsValue     Gauge32,
  usrHistoryHighCapacityAbsValue             CounterBasedGauge64

}

usrHistoryHighCapacityOverflowAbsValue OBJECT-TYPE

  SYNTAX     Gauge32
  MAX-ACCESS read-only
  STATUS     current
  DESCRIPTION
      "The absolute value (i.e. unsigned value) of the
      user-specified statistic during the last sampling period,
      divided by 2^32, truncating fractions (i.e., X DIV 2^32).
      The value during the current sampling period is not made
      available until the period is completed.

Waldbusser Standards Track [Page 62] RFC 3273 Remote Network Monitoring Management July 2002

      To obtain the true value for this sampling interval, the
      associated instance of usrHistoryValStatus should be checked,
      and usrHistoryAbsValue adjusted as necessary.
      If the MIB instance could not be accessed during the sampling
      interval, then this object will have a value of zero and the
      associated instance of usrHistoryValStatus will be set to
      'valueNotAvailable(1)'."
  ::= { usrHistoryHighCapacityEntry 1 }

usrHistoryHighCapacityAbsValue OBJECT-TYPE

  SYNTAX CounterBasedGauge64
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
      "The absolute value (i.e. unsigned value) of the
      user-specified statistic during the last sampling period. The
      value during the current sampling period is not made available
      until the period is completed.
      To obtain the true value for this sampling interval, the
      associated instance of usrHistoryValStatus should be checked,
      and usrHistoryHighCapacityAbsValue adjusted as necessary.
      If the MIB instance could not be accessed during the sampling
      interval, then this object will have a value of zero and the
      associated instance of usrHistoryValStatus will be set to
      'valueNotAvailable(1)'."
  ::= { usrHistoryHighCapacityEntry 2 }

– – High Capacity RMON Probe Capabilities – hcRMONCapabilities OBJECT-TYPE

  SYNTAX BITS {
      mediaIndependentGroup(0),
      etherStatsHighCapacityGroup(1),
      etherHistoryHighCapacityGroup(2),
      hostHighCapacityGroup(3),
      hostTopNHighCapacityGroup(4),
      matrixHighCapacityGroup(5),
      captureBufferHighCapacityGroup(6),
      protocolDistributionHighCapacityGroup(7),
      nlHostHighCapacityGroup(8),
      nlMatrixHighCapacityGroup(9),
      nlMatrixTopNHighCapacityGroup(10),
      alHostHighCapacityGroup(11),
      alMatrixHighCapacityGroup(12),

Waldbusser Standards Track [Page 63] RFC 3273 Remote Network Monitoring Management July 2002

      alMatrixTopNHighCapacityGroup(13),
      usrHistoryHighCapacityGroup(14)
  }
  MAX-ACCESS read-only
  STATUS current
  DESCRIPTION
      "An indication of the High Capacity RMON MIB groups supported
      on at least one interface by this probe."
  ::= { probeConfig 16 }

– Conformance Macros

hcRmonMIBCompliances OBJECT IDENTIFIER ::= { rmonConformance 6 } hcRmonMIBGroups OBJECT IDENTIFIER ::= { rmonConformance 7 }

hcMediaIndependentCompliance MODULE-COMPLIANCE

  STATUS  current
  DESCRIPTION
      "Describes the requirements for conformance to the
      High Capacity Media Independent Group."
  MODULE  -- this module
  MANDATORY-GROUPS { mediaIndependentGroup, hcRMONInformationGroup }
  ::= { hcRmonMIBCompliances 1 }

hcRmon1MIBCompliance MODULE-COMPLIANCE

  STATUS current
  DESCRIPTION
      "Describes the requirements for conformance to the High
      Capacity RMON-1 MIB"
  MODULE  -- this module
      GROUP etherStatsHighCapacityGroup
      DESCRIPTION
          "The etherStatsHighCapacityGroup is optional but requires
          implementation of the rmonEtherStatsGroup."
      GROUP etherHistoryHighCapacityGroup
      DESCRIPTION
          "The etherHistoryHighCapacityGroup is optional but
          requires implementation of the rmonHistoryControlGroup and
          rmonEthernetHistoryGroup."
      GROUP hostHighCapacityGroup
      DESCRIPTION
          "The hostHighCapacityGroup is mandatory when the
          hostTopNHighCapacityGroup is implemented. This group also
          requires implementation of the rmonHostGroup."
      GROUP hostTopNHighCapacityGroup

Waldbusser Standards Track [Page 64] RFC 3273 Remote Network Monitoring Management July 2002

      DESCRIPTION
          "The hostTopNHighCapacityGroup is optional but requires
          implementation of the rmonHostTopNGroup."
      GROUP matrixHighCapacityGroup
      DESCRIPTION
          "The matrixHighCapacityGroup is optional but requires
          implementation of the rmonMatrixGroup."
      GROUP captureBufferHighCapacityGroup
      DESCRIPTION
          "The captureBufferHighCapacityGroup is optional but
          requires implementation of the rmonFilterGroup and
          rmonPacketCaptureGroup."
  MODULE RMON-MIB
      GROUP rmonEtherStatsGroup
      DESCRIPTION
          "The RMON Ethernet Statistics Group is mandatory if the
          etherStatsHighCapacityGroup is implemented."
      GROUP rmonHistoryControlGroup
      DESCRIPTION
          "The RMON History Control Group is mandatory if the
          etherHistoryHighCapacityGroup is implemented."
      GROUP rmonEthernetHistoryGroup
      DESCRIPTION
          "The RMON Ethernet History Group is mandatory if the
          etherHistoryHighCapacityGroup is implemented."
      GROUP rmonHostGroup
      DESCRIPTION
          "The RMON Host Group is mandatory if the
          hostHighCapacityGroup is implemented."
      GROUP rmonHostTopNGroup
      DESCRIPTION
          "The RMON Host Top N Group is mandatory if the
          hostTopNHighCapacityGroup is implemented."
      GROUP rmonMatrixGroup
      DESCRIPTION
          "The RMON Matrix Group is mandatory if the
          matrixHighCapacityGroup is implemented."
      GROUP rmonFilterGroup
      DESCRIPTION

Waldbusser Standards Track [Page 65] RFC 3273 Remote Network Monitoring Management July 2002

          "The RMON Filter Group is mandatory when the
          captureBufferHighCapacityGroup is implemented."
     GROUP rmonPacketCaptureGroup
     DESCRIPTION
          "The RMON Packet Capture Group is mandatory when the
         captureBufferHighCapacityGroup is implemented."
  ::= { hcRmonMIBCompliances 2 }

hcRmon2MIBCompliance MODULE-COMPLIANCE

  STATUS  current
  DESCRIPTION
      "Describes the requirements for conformance to
      the High Capacity RMON-2 MIB"
  MODULE  -- this module
      MANDATORY-GROUPS { protocolDistributionHighCapacityGroup,
                         nlHostHighCapacityGroup,
                         nlMatrixHighCapacityGroup,
                         nlMatrixTopNHighCapacityGroup,
                         usrHistoryHighCapacityGroup,
                         hcRMONInformationGroup }
  MODULE RMON2-MIB
      MANDATORY-GROUPS { protocolDirectoryGroup,
                         protocolDistributionGroup,
                         addressMapGroup,
                         nlHostGroup,
                         nlMatrixGroup,
                         usrHistoryGroup,
                         probeInformationGroup }
      GROUP   rmon1EnhancementGroup
      DESCRIPTION
          "The rmon1EnhancementGroup is mandatory for systems which
          implement RMON [RFC2819]"
  ::= { hcRmonMIBCompliances 3 }

hcRmon2MIBApplicationLayerCompliance MODULE-COMPLIANCE

  STATUS  current
  DESCRIPTION
      "Describes the requirements for conformance to
      the High Capacity RMON-2 MIB with Application Layer
      Enhancements."
  MODULE  -- this module
      MANDATORY-GROUPS { protocolDistributionHighCapacityGroup,
                         nlHostHighCapacityGroup,
                         nlMatrixHighCapacityGroup,

Waldbusser Standards Track [Page 66] RFC 3273 Remote Network Monitoring Management July 2002

                         nlMatrixTopNHighCapacityGroup,
                         alHostHighCapacityGroup,
                         alMatrixHighCapacityGroup,
                         alMatrixTopNHighCapacityGroup,
                         usrHistoryHighCapacityGroup,
                         hcRMONInformationGroup }
  MODULE RMON2-MIB
      MANDATORY-GROUPS { protocolDirectoryGroup,
                         protocolDistributionGroup,
                         addressMapGroup,
                         nlHostGroup,
                         nlMatrixGroup,
                         alHostGroup,
                         alMatrixGroup,
                         usrHistoryGroup,
                         probeInformationGroup }
      GROUP   rmon1EnhancementGroup
      DESCRIPTION
          "The rmon1EnhancementGroup is mandatory for systems which
          implement RMON [RFC2819]"
  ::= { hcRmonMIBCompliances 4 }

mediaIndependentGroup OBJECT-GROUP

  OBJECTS {mediaIndependentDataSource,
      mediaIndependentDropEvents,
      mediaIndependentDroppedFrames,
      mediaIndependentInPkts,
      mediaIndependentInOverflowPkts,
      mediaIndependentInHighCapacityPkts,
      mediaIndependentOutPkts,
      mediaIndependentOutOverflowPkts,
      mediaIndependentOutHighCapacityPkts,
      mediaIndependentInOctets,
      mediaIndependentInOverflowOctets,
      mediaIndependentInHighCapacityOctets,
      mediaIndependentOutOctets,
      mediaIndependentOutOverflowOctets,
      mediaIndependentOutHighCapacityOctets,
      mediaIndependentInNUCastPkts,
      mediaIndependentInNUCastOverflowPkts,
      mediaIndependentInNUCastHighCapacityPkts,
      mediaIndependentOutNUCastPkts,
      mediaIndependentOutNUCastOverflowPkts,
      mediaIndependentOutNUCastHighCapacityPkts,
      mediaIndependentInErrors,
      mediaIndependentOutErrors,
      mediaIndependentInputSpeed,

Waldbusser Standards Track [Page 67] RFC 3273 Remote Network Monitoring Management July 2002

      mediaIndependentOutputSpeed,
      mediaIndependentDuplexMode,
      mediaIndependentDuplexChanges,
      mediaIndependentDuplexLastChange,
      mediaIndependentOwner,
      mediaIndependentStatus }
  STATUS current
  DESCRIPTION
      "Collects utilization statistics for any type of network."
  ::= { hcRmonMIBGroups 1 }

etherStatsHighCapacityGroup OBJECT-GROUP

  OBJECTS { etherStatsHighCapacityOverflowPkts,
            etherStatsHighCapacityPkts,
            etherStatsHighCapacityOverflowOctets,
            etherStatsHighCapacityOctets,
            etherStatsHighCapacityOverflowPkts64Octets,
            etherStatsHighCapacityPkts64Octets,
            etherStatsHighCapacityOverflowPkts65to127Octets,
            etherStatsHighCapacityPkts65to127Octets,
            etherStatsHighCapacityOverflowPkts128to255Octets,
            etherStatsHighCapacityPkts128to255Octets,
            etherStatsHighCapacityOverflowPkts256to511Octets,
            etherStatsHighCapacityPkts256to511Octets,
            etherStatsHighCapacityOverflowPkts512to1023Octets,
            etherStatsHighCapacityPkts512to1023Octets,
            etherStatsHighCapacityOverflowPkts1024to1518Octets,
            etherStatsHighCapacityPkts1024to1518Octets }
  STATUS  current
  DESCRIPTION
      "Collects utilization statistics for ethernet networks."
  ::= { hcRmonMIBGroups 2 }

etherHistoryHighCapacityGroup OBJECT-GROUP

  OBJECTS { etherHistoryHighCapacityOverflowPkts,
            etherHistoryHighCapacityPkts,
            etherHistoryHighCapacityOverflowOctets,
            etherHistoryHighCapacityOctets }
  STATUS  current
  DESCRIPTION
      "Collects utilization statistics for ethernet networks."
  ::= { hcRmonMIBGroups 3 }

hostHighCapacityGroup OBJECT-GROUP

  OBJECTS { hostHighCapacityInOverflowPkts,
            hostHighCapacityInPkts,
            hostHighCapacityOutOverflowPkts,
            hostHighCapacityOutPkts,

Waldbusser Standards Track [Page 68] RFC 3273 Remote Network Monitoring Management July 2002

            hostHighCapacityInOverflowOctets,
            hostHighCapacityInOctets,
            hostHighCapacityOutOverflowOctets,
            hostHighCapacityOutOctets,
            hostTimeHighCapacityInOverflowPkts,
            hostTimeHighCapacityInPkts,
            hostTimeHighCapacityOutOverflowPkts,
            hostTimeHighCapacityOutPkts,
            hostTimeHighCapacityInOverflowOctets,
            hostTimeHighCapacityInOctets,
            hostTimeHighCapacityOutOverflowOctets,
            hostTimeHighCapacityOutOctets }
  STATUS  current
  DESCRIPTION
      "Collects utilization and error statistics per host."
  ::= { hcRmonMIBGroups 4 }

hostTopNHighCapacityGroup OBJECT-GROUP

  OBJECTS { hostTopNHighCapacityAddress,
      hostTopNHighCapacityBaseRate,
      hostTopNHighCapacityOverflowRate,
      hostTopNHighCapacityRate }
  STATUS  current
  DESCRIPTION
      "Prepares sorted reports of utilization and error statistics
      per host."
  ::= { hcRmonMIBGroups 5 }

matrixHighCapacityGroup OBJECT-GROUP

  OBJECTS { matrixSDHighCapacityOverflowPkts,
            matrixSDHighCapacityPkts,
            matrixSDHighCapacityOverflowOctets,
            matrixSDHighCapacityOctets,
            matrixDSHighCapacityOverflowPkts,
            matrixDSHighCapacityPkts,
            matrixDSHighCapacityOverflowOctets,
            matrixDSHighCapacityOctets }
  STATUS  current
  DESCRIPTION
      "Collects utilization statistics per conversation."
  ::= { hcRmonMIBGroups 6 }

captureBufferHighCapacityGroup OBJECT-GROUP

  OBJECTS { captureBufferPacketHighCapacityTime }
  STATUS  current
  DESCRIPTION
      "Provides finer granularity time stamps."

Waldbusser Standards Track [Page 69] RFC 3273 Remote Network Monitoring Management July 2002

  ::= { hcRmonMIBGroups 7 }

protocolDistributionHighCapacityGroup OBJECT-GROUP

  OBJECTS { protocolDistStatsHighCapacityOverflowPkts,
            protocolDistStatsHighCapacityPkts,
            protocolDistStatsHighCapacityOverflowOctets,
            protocolDistStatsHighCapacityOctets }
  STATUS  current
  DESCRIPTION
      "Collects the relative amounts of octets and packets for the
      different protocols detected on a network segment."
  ::= { hcRmonMIBGroups 8 }

nlHostHighCapacityGroup OBJECT-GROUP

  OBJECTS { nlHostHighCapacityInOverflowPkts,
            nlHostHighCapacityInPkts,
            nlHostHighCapacityOutOverflowPkts,
            nlHostHighCapacityOutPkts,
            nlHostHighCapacityInOverflowOctets,
            nlHostHighCapacityInOctets,
            nlHostHighCapacityOutOverflowOctets,
            nlHostHighCapacityOutOctets }
  STATUS  current
  DESCRIPTION
      "Counts the amount of traffic sent from and to each network
      address discovered by the probe."
  ::= { hcRmonMIBGroups 9 }

nlMatrixHighCapacityGroup OBJECT-GROUP

  OBJECTS { nlMatrixSDHighCapacityOverflowPkts,
            nlMatrixSDHighCapacityPkts,
            nlMatrixSDHighCapacityOverflowOctets,
            nlMatrixSDHighCapacityOctets,
            nlMatrixDSHighCapacityOverflowPkts,
            nlMatrixDSHighCapacityPkts,
            nlMatrixDSHighCapacityOverflowOctets,
            nlMatrixDSHighCapacityOctets }
  STATUS  current
  DESCRIPTION
      "Counts the amount of traffic sent between each pair of
      network addresses discovered by the probe."
  ::= { hcRmonMIBGroups 10 }

nlMatrixTopNHighCapacityGroup OBJECT-GROUP

  OBJECTS { nlMatrixTopNHighCapacityProtocolDirLocalIndex,
      nlMatrixTopNHighCapacitySourceAddress,
      nlMatrixTopNHighCapacityDestAddress,
      nlMatrixTopNHighCapacityBasePktRate,

Waldbusser Standards Track [Page 70] RFC 3273 Remote Network Monitoring Management July 2002

      nlMatrixTopNHighCapacityOverflowPktRate,
      nlMatrixTopNHighCapacityPktRate,
      nlMatrixTopNHighCapacityReverseBasePktRate,
      nlMatrixTopNHighCapacityReverseOverflowPktRate,
      nlMatrixTopNHighCapacityReversePktRate,
      nlMatrixTopNHighCapacityBaseOctetRate,
      nlMatrixTopNHighCapacityOverflowOctetRate,
      nlMatrixTopNHighCapacityOctetRate,
      nlMatrixTopNHighCapacityReverseBaseOctetRate,
      nlMatrixTopNHighCapacityReverseOverflowOctetRate,
      nlMatrixTopNHighCapacityReverseOctetRate }
  STATUS  current
  DESCRIPTION
      "Prepares sorted reports of the amount of traffic sent between
      each pair of network addresses discovered by the probe."
  ::= { hcRmonMIBGroups 11 }

alHostHighCapacityGroup OBJECT-GROUP

  OBJECTS { alHostHighCapacityInOverflowPkts,
            alHostHighCapacityInPkts,
            alHostHighCapacityOutOverflowPkts,
            alHostHighCapacityOutPkts,
            alHostHighCapacityInOverflowOctets,
            alHostHighCapacityInOctets,
            alHostHighCapacityOutOverflowOctets,
            alHostHighCapacityOutOctets }
  STATUS  current
  DESCRIPTION
      "Counts the amount of traffic, by protocol, sent from and to
      each network address discovered by the probe."
  ::= { hcRmonMIBGroups 12 }

alMatrixHighCapacityGroup OBJECT-GROUP

  OBJECTS { alMatrixSDHighCapacityOverflowPkts,
            alMatrixSDHighCapacityPkts,
            alMatrixSDHighCapacityOverflowOctets,
            alMatrixSDHighCapacityOctets,
            alMatrixDSHighCapacityOverflowPkts,
            alMatrixDSHighCapacityPkts,
            alMatrixDSHighCapacityOverflowOctets,
            alMatrixDSHighCapacityOctets }
  STATUS  current
  DESCRIPTION
      "Counts the amount of traffic, by protocol, sent between each
      pair of network addresses discovered by the
      probe."
  ::= { hcRmonMIBGroups 13 }

Waldbusser Standards Track [Page 71] RFC 3273 Remote Network Monitoring Management July 2002

alMatrixTopNHighCapacityGroup OBJECT-GROUP

  OBJECTS { alMatrixTopNHighCapacityProtocolDirLocalIndex,
      alMatrixTopNHighCapacitySourceAddress,
      alMatrixTopNHighCapacityDestAddress,
      alMatrixTopNHighCapacityAppProtocolDirLocalIndex,
      alMatrixTopNHighCapacityBasePktRate,
      alMatrixTopNHighCapacityOverflowPktRate,
      alMatrixTopNHighCapacityPktRate,
      alMatrixTopNHighCapacityReverseBasePktRate,
      alMatrixTopNHighCapacityReverseOverflowPktRate,
      alMatrixTopNHighCapacityReversePktRate,
      alMatrixTopNHighCapacityBaseOctetRate,
      alMatrixTopNHighCapacityOverflowOctetRate,
      alMatrixTopNHighCapacityOctetRate,
      alMatrixTopNHighCapacityReverseBaseOctetRate,
      alMatrixTopNHighCapacityReverseOverflowOctetRate,
      alMatrixTopNHighCapacityReverseOctetRate }
  STATUS  current
  DESCRIPTION
      "Prepares sorted reports of the amount of traffic per protocol
      sent between each pair of network addresses discovered by the
      probe."
  ::= { hcRmonMIBGroups 14 }

usrHistoryHighCapacityGroup OBJECT-GROUP

  OBJECTS { usrHistoryHighCapacityOverflowAbsValue,
      usrHistoryHighCapacityAbsValue }
  STATUS  current
  DESCRIPTION
      "Provides user-defined collection of historical information
      from MIB objects on the probe with scalability to statistics
      from high-capacity networks."
  ::= { hcRmonMIBGroups 15 }

hcRMONInformationGroup OBJECT-GROUP

  OBJECTS { hcRMONCapabilities }
  STATUS  current
  DESCRIPTION
      "An indication of the high capacity RMON groups supported on
      at least one interface by this probe."
  ::= { hcRmonMIBGroups 16 }

END

Waldbusser Standards Track [Page 72] RFC 3273 Remote Network Monitoring Management July 2002

6. Security Considerations

 In order to implement this MIB, a probe must capture all packets on
 the locally-attached network, including packets between third
 parties.  These packets are analyzed to collect network addresses,
 protocol usage information, and conversation statistics.  Data of
 this nature may be considered sensitive in some environments.  In
 such environments the administrator may wish to restrict SNMP access
 to the probe.
 A probe implementing this MIB is likely to also implement RMON [RFC
 2819], which includes functions for returning the contents of
 captured packets, potentially including sensitive user data or
 passwords.  It is recommended that SNMP access to these functions be
 restricted.
 There are a number of management objects defined in this MIB that
 have a MAX-ACCESS clause of read-write and/or read-create.  Such
 objects may be considered sensitive or vulnerable in some network
 environments.  The support for SET operations in a non-secure
 environment without proper protection can have a negative effect on
 network operations.
 SNMPv1 by itself is not a secure environment.  Even if the network
 itself is secure (for example by using IPSec), even then, there is no
 control as to who on the secure network is allowed to access and
 GET/SET (read/change/create/delete) the objects in this MIB.
 It is recommended that the implementers consider the security
 features as provided by the SNMPv3 framework.  Specifically, the use
 of the User-based Security Model RFC 2574 [RFC2574] and the View-
 based Access Control Model RFC 2575 [RFC2575] is recommended.
 It is then a customer/user responsibility to ensure that the SNMP
 entity giving access to an instance of this MIB, is properly
 configured to give access to the objects only to those principals
 (users) that have legitimate rights to indeed GET or SET
 (change/create/delete) them.

7. Acknowledgments

 This document was produced by the IETF Remote Network Monitoring
 Working Group.

8. References

 [1]   Harrington, D., Presuhn, R. and B. Wijnen, "An Architecture for
       Describing SNMP Management Frameworks", RFC 2571, April 1999.

Waldbusser Standards Track [Page 73] RFC 3273 Remote Network Monitoring Management July 2002

 [2]   Rose, M. and K. McCloghrie, "Structure and Identification of
       Management Information for TCP/IP-based Internets", STD 16, RFC
       1155, May 1990.
 [3]   Rose, M. and K. McCloghrie, "Concise MIB Definitions", STD 16,
       RFC 1212, March 1991.
 [4]   Rose, M., "A Convention for Defining Traps for use with the
       SNMP", RFC 1215, March 1991.
 [5]   McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J., Rose,
       M. and S. Waldbusser, "Structure of Management Information
       Version 2 (SMIv2)", STD 58, RFC 2578, April 1999.
 [6]   McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J., Rose,
       M. and S. Waldbusser, "Textual Conventions for SMIv2", STD 58,
       RFC 2579, April 1999.
 [7]   McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J., Rose,
       M. and S. Waldbusser, "Conformance Statements for SMIv2", STD
       58, RFC 2580, April 1999.
 [8]   Case, J., Fedor, M., Schoffstall, M. and J. Davin, "Simple
       Network Management Protocol", STD 15, RFC 1157, May 1990.
 [9]   Case, J., McCloghrie, K., Rose, M. and S. Waldbusser,
       "Introduction to Community-based SNMPv2", RFC 1901, January
       1996.
 [10]  Case, J., McCloghrie, K., Rose, M. and S. Waldbusser,
       "Transport Mappings for Version 2 of the Simple Network
       Management Protocol (SNMPv2)", RFC 1906, January 1996.
 [11]  Case, J., Harrington D., Presuhn R. and B. Wijnen, "Message
       Processing and Dispatching for the Simple Network Management
       Protocol (SNMP)", RFC 2572, April 1999.
 [12]  Blumenthal, U. and B. Wijnen, "User-based Security Model (USM)
       for version 3 of the Simple Network Management Protocol
       (SNMPv3)", RFC 2574, April 1999.
 [13]  Case, J., McCloghrie, K., Rose, M. and S. Waldbusser, "Protocol
       Operations for Version 2 of the Simple Network Management
       Protocol (SNMPv2)", RFC 1905, January 1996.
 [14]  Levi, D., Meyer, P. and B. Stewart, "SNMPv3 Applications", RFC
       2573, April 1999.

Waldbusser Standards Track [Page 74] RFC 3273 Remote Network Monitoring Management July 2002

 [15]  Wijnen, B., Presuhn, R. and K. McCloghrie, "View-based Access
       Control Model (VACM) for the Simple Network Management Protocol
       (SNMP)", RFC 2575, April 1999.
 [16]  McCloghrie, K. and M. Rose, Editors, "Management Information
       Base for Network Management of TCP/IP-based internets: MIB-II",
       STD 17, RFC 1213, March 1991.
 [17]  McCloghrie, K. and F. Kastenholz, "The Interfaces Group MIB",
       RFC 2863, June 2000.
 [18]  Waldbusser, S., "Remote Network Monitoring MIB", STD 59, RFC
       2819, May 2000.
 [19]  Waldbusser, S., "Token Ring Extensions to the Remote Network
       Monitoring MIB", RFC 1513, September 1993.
 [20]  Waldbusser, S., "Remote Network Monitoring Management
       Information Base Version 2 using SMIv2", RFC 2021, January
       1997.
 [21]  Case, J., Mundy, R., Partain, D. and B. Stewart, "Introduction
       to Version 3 of the Internet-standard Network Management
       Framework, RFC 2570, April 1999.

9. Notices

 The IETF takes no position regarding the validity or scope of any
 intellectual property or other rights that might be claimed to
 pertain to the implementation or use of the technology described in
 this document or the extent to which any license under such rights
 might or might not be available; neither does it represent that it
 has made any effort to identify any such rights.  Information on the
 IETF's procedures with respect to rights in standards-track and
 standards-related documentation can be found in BCP-11.  Copies of
 claims of rights made available for publication and any assurances of
 licenses to be made available, or the result of an attempt made to
 obtain a general license or permission for the use of such
 proprietary rights by implementors or users of this specification can
 be obtained from the IETF Secretariat.
 The IETF invites any interested party to bring to its attention any
 copyrights, patents or patent applications, or other proprietary
 rights which may cover technology that may be required to practice
 this standard.  Please address the information to the IETF Executive
 Director.

Waldbusser Standards Track [Page 75] RFC 3273 Remote Network Monitoring Management July 2002

10. Author's Address

 Steve Waldbusser
 Phone:  +1-650-948-6500
 Fax:    +1-650-745-0671
 EMail:  waldbusser@nextbeacon.com

Waldbusser Standards Track [Page 76] RFC 3273 Remote Network Monitoring Management July 2002

11. Full Copyright Statement

 Copyright (C) The Internet Society (2002).  All Rights Reserved.
 This document and translations of it may be copied and furnished to
 others, and derivative works that comment on or otherwise explain it
 or assist in its implementation may be prepared, copied, published
 and distributed, in whole or in part, without restriction of any
 kind, provided that the above copyright notice and this paragraph are
 included on all such copies and derivative works.  However, this
 document itself may not be modified in any way, such as by removing
 the copyright notice or references to the Internet Society or other
 Internet organizations, except as needed for the purpose of
 developing Internet standards in which case the procedures for
 copyrights defined in the Internet Standards process must be
 followed, or as required to translate it into languages other than
 English.
 The limited permissions granted above are perpetual and will not be
 revoked by the Internet Society or its successors or assigns.
 This document and the information contained herein is provided on an
 "AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING
 TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
 BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION
 HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF
 MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

Acknowledgement

 Funding for the RFC Editor function is currently provided by the
 Internet Society.

Waldbusser Standards Track [Page 77]

/data/webs/external/dokuwiki/data/pages/rfc/rfc3273.txt · Last modified: 2002/07/10 00:02 by 127.0.0.1

Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki