GENWiki

Premier IT Outsourcing and Support Services within the UK

User Tools

Site Tools


rfc:rfc2984

Network Working Group C. Adams Request for Comments: 2984 Entrust Technologies Category: Standards Track October 2000

          Use of the CAST-128 Encryption Algorithm in CMS

Status of this Memo

 This document specifies an Internet standards track protocol for the
 Internet community, and requests discussion and suggestions for
 improvements.  Please refer to the current edition of the "Internet
 Official Protocol Standards" (STD 1) for the standardization state
 and status of this protocol.  Distribution of this memo is unlimited.

Copyright Notice

 Copyright (C) The Internet Society (2000).  All Rights Reserved.

Abstract

 This document specifies how to incorporate CAST-128 (RFC2144) into
 the S/MIME Cryptographic Message Syntax (CMS) as an additional
 algorithm for symmetric encryption.  The relevant OIDs and processing
 steps are provided so that CAST-128 may be included in the CMS
 specification (RFC2630) for symmetric content and key encryption.
 The key words "MUST", "MUST NOT", "REQUIRED", "SHOULD", "SHOULD NOT",
 "RECOMMENDED", "MAY", and "OPTIONAL" in this document (in uppercase,
 as shown) are to be interpreted as described in [RFC2119].

1. Motivation

 S/MIME (Secure/Multipurpose Internet Mail Extensions) [SMIME2,
 SMIME3] is a set of specifications for the secure transport of MIME
 objects.  In the current (S/MIME v3) specifications the mandatory-
 to-implement symmetric algorithm for content encryption and key
 encryption is triple-DES (3DES).  While this is perfectly acceptable
 in many cases because the security of 3DES is generally considered to
 be high, for some environments 3DES may be seen to be too slow.  In
 part to help alleviate such performance concerns, S/MIME has allowed
 any number of (optional) additional algorithms to be used for
 symmetric content and key encryption.
 The CAST-128 encryption algorithm [RFC2144, Adams] is a well-studied
 symmetric cipher that has a number of appealing features, including
 relatively high performance and a variable key size (from 40 bits to
 128 bits).  It is available royalty-free and license-free for

Adams Standards Track [Page 1] RFC 2984 CAST-128 in CMS October 2000

 commercial and non-commercial uses worldwide [IPR], and therefore is
 widely used in a number of applications around the Internet.  It thus
 seems to be a suitable optional encryption algorithm for S/MIME.
 This document describes how to use CAST-128 within the S/MIME CMS
 specification.

2. Specification

 This section provides the OIDs and processing information necessary
 for CAST-128 to be used for content and key encryption in CMS.

2.1 OIDs for Content and Key Encryption

 CAST-128 is added to the set of optional symmetric encryption
 algorithms in CMS by providing two unique object identifiers (OIDs).
 One OID defines the content encryption algorithm and the other
 defines the key encryption algorithm.  Thus a CMS agent can apply
 CAST-128 either for content or key encryption by selecting the
 corresponding object identifier, supplying the required parameter,
 and starting the program code.
 For content encryption the use of CAST-128 in cipher block chaining
 (CBC) mode is RECOMMENDED.  The key length is variable (from 40 to
 128 bits in 1-octet increments).
 The CAST-128 content-encryption algorithm in CBC mode has the
 following object identifier:
   cast5CBC OBJECT IDENTIFIER ::= {iso(1) member-body(2)
       us(840) nt(113533) nsn(7) algorithms(66) 10}
 The parameter associated with this object identifier contains the
 initial vector IV and the key length:
   cast5CBCParameters ::= SEQUENCE {
       iv         OCTET STRING DEFAULT 0,
       -- Initialization vector
       keyLength  INTEGER
       -- Key length, in bits
   }
 Comments regarding the use of the IV may be found in [RFC2144].
 The key-wrap/unwrap procedures used to encrypt/decrypt a CAST-128
 content-encryption key with a CAST-128 key-encryption key are
 specified in Section 2.2.  Generation and distribution of key-
 encryption keys are beyond the scope of this document.

Adams Standards Track [Page 2] RFC 2984 CAST-128 in CMS October 2000

 The CAST-128 key-encryption algorithm has the following object
 identifier:
   cast5CMSkeywrap OBJECT IDENTIFIER ::= { iso(1)
       member-body(2) us(840) nt(113533) nsn(7)
       algorithms(66) 15}
 The parameter associated with this object identifier contains only
 the key length (because the key wrapping procedure itself defines how
 and when to use an IV):
   cast5CMSkeywrapParameter ::= INTEGER
     -- key length, in bits

2.2 Key Wrapping and Unwrapping

 CAST-128 key wrapping and unwrapping is done in conformance with CMS
 [RFC2630].

2.2.1 CAST-128 Key Wrap

 Key wrapping with CAST-128 is identical to [RFC2630], Sections 12.6.1
 and 12.6.4, with "RC2" replaced by "CAST-128" in the introduction to
 12.6.4.  Only 128-bit CAST-128 keys may be used as key-encryption
 keys, and they MUST be used with the cast5CMSkeywrapParameter set to
 128.  It is RECOMMENDED that the size of the content-encryption key
 and the size of the key-encryption key be equal (since the security
 of the content will be at most the smaller of these two values).

2.2.2 CAST-128 Key Unwrap

 Key unwrapping with CAST-128 is identical to [RFC2630], Sections
 12.6.1 and 12.6.5, with "RC2" replaced by "CAST-128" in the
 introduction to 12.6.5.

3. Using CAST-128 in S/MIME Clients

 An S/MIME client SHOULD announce the set of cryptographic functions
 it supports by using the S/MIME capabilities attribute.  This
 attribute provides a partial list of OIDs of cryptographic functions
 and MUST be signed by the client.  The functions' OIDs SHOULD be
 logically separated in functional categories and MUST be ordered with
 respect to their preference.  If an S/MIME client is required to
 support symmetric encryption with CAST-128, the capabilities
 attribute MUST contain the cast5CBC OID specified above in the
 category of symmetric algorithms.  The parameter associated with this
 OID (see above) MUST be used to indicate supported key length.  For
 example, when the supported key length is 128 bits, the

Adams Standards Track [Page 3] RFC 2984 CAST-128 in CMS October 2000

 SMIMECapability SEQUENCE representing CAST-128 MUST be DER-encoded as
 the following hexadecimal string:
     301106092A864886F67D07420A300402020080.
 When a sending agent creates an encrypted message, it has to decide
 which type of encryption algorithm to use.  In general the decision
 process involves information obtained from the capabilities lists
 included in messages received from the recipient, as well as other
 information such as private agreements, user preferences, legal
 restrictions, and so on. If users require CAST-128 for symmetric
 encryption, it MUST be supported by the S/MIME clients on both the
 sending and receiving side, and it MUST be set in the user
 preferences.

4. Security Considerations

 This document specifies the use of the CAST-128 symmetric cipher for
 encrypting the content of a CMS message and for encrypting the
 symmetric key used to encrypt the content of a CMS message. Although
 CAST-128 allows keys of variable length to be used, it must be
 recognized that smaller key sizes (e.g., 40, 56, or 64 bits) may be
 unacceptably weak for some environments.  The use of larger key sizes
 (e.g., 128 bits) is always RECOMMENDED (when relevant import, export,
 or other laws permit).  It is also RECOMMENDED that the size of the
 content-encryption key and the size of the key-encryption key be
 equal (since the security of the content will be at most the smaller
 of these two values).

References

 [Adams]   C. Adams, "Constructing Symmetric Ciphers using the CAST
           Design Procedure", Designs, Codes, and Cryptography,
           vol.12, no.3, November 1997, pp.71-104.
 [IPR]     See the "IETF Page of Intellectual Property Rights
           Notices", http://www.ietf.cnri.reston.va.us/ipr.html
 [RFC2144] Adams, C., "The CAST-128 Encryption Algorithm", RFC 2144,
           May 1997.
 [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
           Requirement Levels", BCP 14, RFC 2119, March 1997.
 [RFC2630] Housley, R., "Cryptographic Message Syntax", RFC 2630, June
           1999.

Adams Standards Track [Page 4] RFC 2984 CAST-128 in CMS October 2000

 [SMIME2]  Dusse, S., Hoffman, P., Ramsdell, B., Lundblade, L. and L.
           Repka, "S/MIME Version 2 Message Specification", RFC 2311,
           March 1998.
           Dusse, S., Hoffman, P., Ramsdell, B. and J. Weinstein,
           "S/MIME Version 2 Certificate Handling", RFC 2312, March
           1998.
 [SMIME3]  Ramsdell, B., "S/MIME Version 3 Certificate Handling", RFC
           2632, June 1999.
           Ramsdell, B., "S/MIME Version 3 Message Specification", RFC
           2633, June 1999.

Author's Address

 Carlisle Adams
 Entrust Technologies
 1000 Innovation Drive,
 Kanata, Ontario, Canada K2K 3E7
 EMail: cadams@entrust.com

Adams Standards Track [Page 5] RFC 2984 CAST-128 in CMS October 2000

Full Copyright Statement

 Copyright (C) The Internet Society (2000).  All Rights Reserved.
 This document and translations of it may be copied and furnished to
 others, and derivative works that comment on or otherwise explain it
 or assist in its implementation may be prepared, copied, published
 and distributed, in whole or in part, without restriction of any
 kind, provided that the above copyright notice and this paragraph are
 included on all such copies and derivative works.  However, this
 document itself may not be modified in any way, such as by removing
 the copyright notice or references to the Internet Society or other
 Internet organizations, except as needed for the purpose of
 developing Internet standards in which case the procedures for
 copyrights defined in the Internet Standards process must be
 followed, or as required to translate it into languages other than
 English.
 The limited permissions granted above are perpetual and will not be
 revoked by the Internet Society or its successors or assigns.
 This document and the information contained herein is provided on an
 "AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING
 TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
 BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION
 HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF
 MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

Acknowledgement

 Funding for the RFC Editor function is currently provided by the
 Internet Society.

Adams Standards Track [Page 6]

/data/webs/external/dokuwiki/data/pages/rfc/rfc2984.txt · Last modified: 2000/10/17 17:27 by 127.0.0.1

Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki