GENWiki

Premier IT Outsourcing and Support Services within the UK

User Tools

Site Tools


rfc:rfc2221

Network Working Group M. Gahrns Request for Comments: 2221 Microsoft Category: Standards Track October 1997

                       IMAP4 Login Referrals

Status of this Memo

 This document specifies an Internet standards track protocol for the
 Internet community, and requests discussion and suggestions for
 improvements.  Please refer to the current edition of the "Internet
 Official Protocol Standards" (STD 1) for the standardization state
 and status of this protocol.  Distribution of this memo is unlimited.

Copyright Notice

 Copyright (C) The Internet Society (1997).  All Rights Reserved.

1. Abstract

 When dealing with large amounts of users and many IMAP4 [RFC-2060]
 servers, it is often necessary to move users from one IMAP4 server to
 another.  For example, hardware failures or organizational changes
 may dictate such a move.
 Login referrals allow clients to transparently connect to an
 alternate IMAP4 server, if their home IMAP4 server has changed.
 A referral mechanism can provide efficiencies over the alternative
 'proxy method', in which the local IMAP4 server contacts the remote
 server on behalf of the client, and then transfers the data from the
 remote server to itself, and then on to the client.  The referral
 mechanism's direct client connection to the remote server is often a
 more efficient use of bandwidth, and does not require the local
 server to impersonate the client when authenticating to the remote
 server.

2. Conventions used in this document

 In examples, "C:" and "S:" indicate lines sent by the client and
 server respectively.
 A home server, is an IMAP4 server that contains the user's inbox.
 A remote server is a server that contains remote mailboxes.

Gahrns Standards Track [Page 1] RFC 2221 IMAP4 Login Referrals October 1997

 The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
 "SHOULD", "SHOULD NOT", "RECOMMENDED",  "MAY", and "OPTIONAL" in this
 document are to be interpreted as described in [RFC-2119].

3. Introduction and Overview

 IMAP4 servers that support this extension MUST list the keyword
 LOGIN-REFERRALS in their CAPABILITY response.  No client action is
 needed to invoke the LOGIN-REFERRALS capability in a server.
 A LOGIN-REFERRALS capable IMAP4 server SHOULD NOT return a referral
 to a server that will return a referral. A client MUST NOT follow
 more than 10 levels of referral without consulting the user.
 A LOGIN-REFERRALS response code MUST contain as an argument a valid
 IMAP server URL as defined in [IMAP-URL].
 A home server referral consists of either a tagged NO or OK, or an
 untagged BYE response that contains a LOGIN-REFERRALS response code.
 Example: A001 NO [REFERRAL IMAP://user;AUTH=*@SERVER2/] Remote Server
 NOTE: user;AUTH=* is specified as required by [IMAP-URL] to avoid a
 client falling back to anonymous login.

4. Home Server Referrals

 A home server referral may be returned in response to an AUTHENTICATE
 or LOGIN command, or it may appear in the connection startup banner.
 If a server returns a home server referral in a tagged NO response,
 that server does not contain any mailboxes that are accessible to the
 user.  If a server returns a home server referral in a tagged OK
 response, it indicates that the user's personal mailboxes are
 elsewhere, but the server contains public mailboxes which are
 readable by the user.  After receiving a home server referral, the
 client can not make any assumptions as to whether this was a
 permanent or temporary move of the user.

4.1. LOGIN and AUTHENTICATE Referrals

 An IMAP4 server MAY respond to a LOGIN or AUTHENTICATE command with a
 home server referral if it wishes to direct the user to another IMAP4
 server.
 Example:  C: A001 LOGIN MIKE PASSWORD
           S: A001 NO [REFERRAL IMAP://MIKE@SERVER2/] Specified user
                   is invalid on this server. Try SERVER2.

Gahrns Standards Track [Page 2] RFC 2221 IMAP4 Login Referrals October 1997

 Example:  C: A001 LOGIN MATTHEW PASSWORD
           S: A001 OK [REFERRAL IMAP://MATTHEW@SERVER2/] Specified
                   user's personal mailboxes located on Server2, but
                   public mailboxes are available.
 Example:  C: A001 AUTHENTICATE GSSAPI
           <authentication exchange>
           S: A001 NO [REFERRAL IMAP://user;AUTH=GSSAPI@SERVER2/]
                   Specified user is invalid on this server. Try
                   SERVER2.

4.2. BYE at connection startup referral

 An IMAP4 server MAY respond with an untagged BYE and a REFERRAL
 response code that contains an IMAP URL to a home server if it is not
 willing to accept connections and wishes to direct the client to
 another IMAP4 server.
 Example:  S: * BYE [REFERRAL IMAP://user;AUTH=*@SERVER2/] Server not
                accepting connections.  Try SERVER2

5. Formal Syntax

 The following syntax specification uses the augmented Backus-Naur
 Form (BNF) as described in [ABNF].
 This amends the "resp_text_code" element of the IMAP4 grammar
 described in [RFC-2060]
 resp_text_code =/ "REFERRAL" SPACE <imapurl>
    ; See [IMAP-URL] for definition of <imapurl>
    ; See [RFC-2060] for base definition of resp_text_code

6. Security Considerations

 The IMAP4 login referral mechanism makes use of IMAP URLs, and as
 such, have the same security considerations as general internet URLs
 [RFC-1738], and in particular IMAP URLs [IMAP-URL].
 A server MUST NOT give a login referral if authentication for that
 user fails. This is to avoid revealing information about the user's
 account to an unauthorized user.
 With the LOGIN-REFERRALS capability, it is potentially easier to
 write a rogue 'password catching' server that collects login data and
 then refers the client to their actual IMAP4 server.  Although
 referrals reduce the effort to write such a server, the referral
 response makes detection of the intrusion easier.

Gahrns Standards Track [Page 3] RFC 2221 IMAP4 Login Referrals October 1997

7. References

 [RFC-2060], Crispin, M., "Internet Message Access Protocol - Version
 4rev1", RFC 2060, December 1996.
 [IMAP-URL], Newman, C., "IMAP URL Scheme", RFC 2192, Innosoft,
 September 1997.
 [RFC-1738], Berners-Lee, T., Masinter, L. and M. McCahill, "Uniform
 Resource Locators  (URL)", RFC 1738, December 1994.
 [RFC-2119], Bradner, S., "Key words for use in RFCs to Indicate
 Requirement Levels", RFC 2119, March 1997.
 [ABNF], DRUMS working group, Dave Crocker Editor, "Augmented BNF for
 Syntax Specifications: ABNF", Work in Progress.

8. Acknowledgments

 Many valuable suggestions were received from private discussions and
 the IMAP4 mailing list.  In particular, Raymond Cheng, Mark Crispin,
 Mark Keasling Chris Newman and Larry Osterman made significant
 contributions to this document.

9. Author's Address

 Mike Gahrns
 Microsoft
 One Microsoft Way
 Redmond, WA, 98072
 Phone: (206) 936-9833
 EMail: mikega@microsoft.com

Gahrns Standards Track [Page 4] RFC 2221 IMAP4 Login Referrals October 1997

10. Full Copyright Statement

 Copyright (C) The Internet Society (1997).  All Rights Reserved.
 This document and translations of it may be copied and furnished to
 others, and derivative works that comment on or otherwise explain it
 or assist in its implmentation may be prepared, copied, published
 andand distributed, in whole or in part, without restriction of any
 kind, provided that the above copyright notice and this paragraph are
 included on all such copies and derivative works.  However, this
 document itself may not be modified in any way, such as by removing
 the copyright notice or references to the Internet Society or other
 Internet organizations, except as needed for the purpose of
 developing Internet standards in which case the procedures for
 copyrights defined in the Internet Standards process must be
 followed, or as required to translate it into languages other than
 English.
 The limited permissions granted above are perpetual and will not be
 revoked by the Internet Society or its successors or assigns.
 This document and the information contained herein is provided on an
 "AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING
 TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
 BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION
 HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF
 MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE."

Gahrns Standards Track [Page 5]

/data/webs/external/dokuwiki/data/pages/rfc/rfc2221.txt · Last modified: 1997/10/16 19:49 by 127.0.0.1

Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki