rfc:rfc1269
Network Working Group S. Willis Request for Comments: 1269 J. Burruss
Wellfleet Communications Inc.
October 1991
Definitions of Managed Objects
for the Border Gateway Protocol (Version 3)
Status of this Memo
This memo is an extension to the SNMP MIB. This RFC specifies an IAB standards track protocol for the Internet community, and requests discussion and suggestions for improvements. Please refer to the current edition of the "IAB Official Protocol Standards" for the standardization state and status of this protocol. Distribution of this memo is unlimited.
1. Abstract
This memo defines a portion of the Management Information Base (MIB) for use with network management protocols in TCP/IP-based internets. In particular, it defines objects for managing the Border Gateway Protocol [11,12].
2. The Network Management Framework
The Internet-standard Network Management Framework consists of three components. They are:
RFC 1155 which defines the SMI, the mechanisms used for describing
and naming objects for the purpose of management. RFC 1212
defines a more concise description mechanism, which is wholly
consistent with the SMI.
RFC 1156 which defines MIB-I, the core set of managed objects for
the Internet suite of protocols. RFC 1213, defines MIB-II, an
evolution of MIB-I based on implementation experience and new
operational requirements.
RFC 1157 which defines the SNMP, the protocol used for network
access to managed objects.
The Framework permits new objects to be defined for the purpose of experimentation and evaluation.
Willis & Burruss [Page 1] RFC 1269 BGP-3 MIB October 1991
3. Objects
Managed objects are accessed via a virtual information store, termed the Management Information Base or MIB. Objects in the MIB are defined using the subset of Abstract Syntax Notation One (ASN.1) [7] defined in the SMI. In particular, each object has a name, a syntax, and an encoding. The name is an object identifier, an administratively assigned name, which specifies an object type. The object type together with an object instance serves to uniquely identify a specific instantiation of the object. For human convenience, we often use a textual string, termed the OBJECT DESCRIPTOR, to also refer to the object type.
The syntax of an object type defines the abstract data structure corresponding to that object type. The ASN.1 language is used for this purpose. However, the SMI [3] purposely restricts the ASN.1 constructs which may be used. These restrictions are explicitly made for simplicity.
The encoding of an object type is simply how that object type is represented using the object type's syntax. Implicitly tied to the notion of an object type's syntax and encoding is how the object type is represented when being transmitted on the network.
The SMI specifies the use of the basic encoding rules of ASN.1 [8], subject to the additional requirements imposed by the SNMP.
3.1. Format of Definitions
Section 5 contains contains the specification of all object types contained in this MIB module. The object types are defined using the conventions defined in the SMI, as amended by the extensions specified in [9,10].
4. Overview
These objects are used to control and manage a BGP [11,12] implementation.
The Border Gateway Protocol (BGP) is an inter-Autonomous System routing protocol. The primary function of a BGP speaking system is to exchange network reachability information with other BGP systems. This network reachability information includes information on the full path of Autonomous Systems that traffic must transit to reach these networks.
BGP runs over a reliable transport protocol. This eliminates the need to implement explicit update fragmentation, retransmission,
Willis & Burruss [Page 2] RFC 1269 BGP-3 MIB October 1991
acknowledgement, and sequencing. Any authentication scheme used by the transport protocol may be used in addition to BGP's own authentication mechanisms.
The planned use of BGP in the Internet environment, including such issues as topology, the interaction between BGP and IGPs, and the enforcement of routing policy rules is presented in a companion document [12].
Apart from a few system variables, this MIB is broken into two tables: the BGP Peer Table and the BGP Received Path Attribute Table. The Peer Table reflects information about BGP peer connections, such as their state and current activity. The Received Path Attribute Table contains all attributes received from all peers before local routing policy has been applied. The actual attributes used in determining a route are a subset of the received attribute table.
5. Definitions
RFC1269-MIB DEFINITIONS ::= BEGIN
IMPORTS
NetworkAddress, IpAddress, Counter
FROM RFC1155-SMI
mib-2
FROM RFC1213-MIB
OBJECT-TYPE
FROM RFC-1212
TRAP-TYPE
FROM RFC-1215;
- - This MIB module uses the extended OBJECT-TYPE macro as
- - defined in [9], and the TRAP-TYPE macro as defined
- - in [10].
bgp OBJECT IDENTIFIER ::= { mib-2 15 }
bgpVersion OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Vector of supported BGP protocol version
numbers. Each peer negotiates the version from
this vector. Versions are identified via the
string of bits contained within this object.
The first octet contains bits 0 to 7, the
second octet contains bits 8 to 15, and so on,
Willis & Burruss [Page 3] RFC 1269 BGP-3 MIB October 1991
with the most significant bit referring to the
lowest bit number in the octet (e.g., the MSB
of the first octet refers to bit 0). If a bit,
i, is present and set, then the version (i+1)
of the BGP is supported."
::= { bgp 1 }
bgpLocalAs OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The local autonomous system number."
::= { bgp 2 }
bgpPeerTable OBJECT-TYPE
SYNTAX SEQUENCE OF BgpPeerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The bgp peer table."
::= { bgp 3 }
bgpIdentifier OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The BGP Identifier of local system."
::= { bgp 4 }
bgpPeerEntry OBJECT-TYPE
SYNTAX BgpPeerEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Information about a BGP peer connection."
INDEX
{ bgpPeerRemoteAddr }
::= { bgpPeerTable 1 }
BgpPeerEntry ::= SEQUENCE {
bgpPeerIdentifier
IpAddress,
bgpPeerState
INTEGER,
bgpPeerAdminStatus
INTEGER,
Willis & Burruss [Page 4] RFC 1269 BGP-3 MIB October 1991
bgpPeerNegotiatedVersion
INTEGER,
bgpPeerLocalAddr
IpAddress,
bgpPeerLocalPort
INTEGER,
bgpPeerRemoteAddr
IpAddress,
bgpPeerRemotePort
INTEGER,
bgpPeerRemoteAs
INTEGER,
bgpPeerInUpdates
Counter,
bgpPeerOutUpdates
Counter,
bgpPeerInTotalMessages
Counter,
bgpPeerOutTotalMessages
Counter,
bgpPeerLastError
OCTET STRING
}
bgpPeerIdentifier OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The BGP Identifier of this entry's BGP peer."
::= { bgpPeerEntry 1 }
bgpPeerState OBJECT-TYPE
SYNTAX INTEGER {
idle(1),
connect(2),
active(3),
opensent(4),
openconfirm(5),
established(6)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The bgp peer connection state. "
::= { bgpPeerEntry 2 }
Willis & Burruss [Page 5] RFC 1269 BGP-3 MIB October 1991
bgpPeerAdminStatus OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The desired state of the BGP connection. A
transition from 'stop' to 'start' will cause
the BGP Start Event to be generated. A
transition from 'start' to 'stop' will cause
the BGP Stop Event to be generated. This
parameter can be used to restart BGP peer
connections. Care should be used in providing
write access to this object without adequate
authentication."
::= { bgpPeerEntry 3 }
bgpPeerNegotiatedVersion OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The negotiated version of BGP running between
the two peers. "
::= { bgpPeerEntry 4 }
bgpPeerLocalAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The local IP address of this entry's BGP
connection."
::= { bgpPeerEntry 5 }
bgpPeerLocalPort OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The local port for the TCP connection between
the BGP peers."
::= { bgpPeerEntry 6 }
bgpPeerRemoteAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
Willis & Burruss [Page 6] RFC 1269 BGP-3 MIB October 1991
"The remote IP address of this entry's BGP
peer."
::= { bgpPeerEntry 7 }
bgpPeerRemotePort OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The remote port for the TCP connection between
the BGP peers. Note that the objects
bgpLocalAddr, bgpLocalPort, bgpRemoteAddr and
bgpRemotePort provide the appropriate reference
to the standard MIB TCP connection table."
::= { bgpPeerEntry 8 }
bgpPeerRemoteAs OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The remote autonomous system number."
::= { bgpPeerEntry 9 }
bgpPeerInUpdates OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of BGP UPDATE messages received on
this connection. This object should be
initialized to zero when the connection is
established."
::= { bgpPeerEntry 10 }
bgpPeerOutUpdates OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of BGP UPDATE messages received on
this connection. This object should be
initialized to zero when the connection is
established."
::= { bgpPeerEntry 11}
bgpPeerInTotalMessages OBJECT-TYPE
SYNTAX Counter
Willis & Burruss [Page 7] RFC 1269 BGP-3 MIB October 1991
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of messages received from the
remote peer on this connection. This object
should be initialized to zero when the
connection is established."
::= { bgpPeerEntry 12 }
bgpPeerOutTotalMessages OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of messages transmitted to
the remote peer on this connection. This object
should be initialized to zero when the
connection is established."
::= { bgpPeerEntry 13 }
bgpPeerLastError OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (2))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The last error code and subcode seen by this
peer on this connection. If no error has
occurred, this field is zero. Otherwise, the
first byte of this two byte OCTET STRING
contains the error code; the second contains
the subcode."
::= { bgpPeerEntry 14 }
bgpRcvdPathAttrTable OBJECT-TYPE
SYNTAX SEQUENCE OF BgpPathAttrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"The BGP Received Path Attribute Table contains
information about paths to destination networks
received by all peers."
::= { bgp 5 }
bgpPathAttrEntry OBJECT-TYPE
SYNTAX BgpPathAttrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
Willis & Burruss [Page 8] RFC 1269 BGP-3 MIB October 1991
"Information about a path to a network."
INDEX
{ bgpPathAttrDestNetwork,
bgpPathAttrPeer }
::= { bgpRcvdPathAttrTable 1 }
BgpPathAttrEntry ::= SEQUENCE {
bgpPathAttrPeer
IpAddress,
bgpPathAttrDestNetwork
IpAddress,
bgpPathAttrOrigin
INTEGER,
bgpPathAttrASPath
OCTET STRING,
bgpPathAttrNextHop
IpAddress,
bgpPathAttrInterASMetric
INTEGER
}
bgpPathAttrPeer OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The IP address of the peer where the path
information
was learned."
::= { bgpPathAttrEntry 1 }
bgpPathAttrDestNetwork OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The address of the destination network."
::= { bgpPathAttrEntry 2 }
bgpPathAttrOrigin OBJECT-TYPE
SYNTAX INTEGER {
igp(1),-- networks are interior
egp(2),-- networks learned via EGP
incomplete(3) -- undetermined
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
Willis & Burruss [Page 9] RFC 1269 BGP-3 MIB October 1991
"The ultimate origin of the path information."
::= { bgpPathAttrEntry 3 }
bgpPathAttrASPath OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The set of ASs that must be traversed to reach
the network. ( This object is probably best
represented as SEQUENCE OF INTEGER. For SMI
compatibility, though, it is represented as
OCTET STRING. Each AS is represented as a pair
of octets according to the following algorithm:
first-byte-of-pair = ASNumber / 256;
second-byte-of-pair = ASNumber & 255;"
::= { bgpPathAttrEntry 4 }
bgpPathAttrNextHop OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The address of the border router that should
be used for the destination network."
::= { bgpPathAttrEntry 5 }
bgpPathAttrInterASMetric OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The optional inter-AS metric. If this
attribute has not been provided for this route,
the value for this object is 0."
::= { bgpPathAttrEntry 6 }
bgpEstablished TRAP-TYPE
ENTERPRISE { bgp }
VARIABLES { bgpPeerRemoteAddr,
bgpPeerLastError,
bgpPeerState }
DESCRIPTION
"The BGP Established event is generated when
the BGP FSM enters the ESTABLISHED state. "
::= 1
Willis & Burruss [Page 10] RFC 1269 BGP-3 MIB October 1991
bgpBackwardTransition TRAP-TYPE
ENTERPRISE { bgp }
VARIABLES { bgpPeerRemoteAddr,
bgpPeerLastError,
bgpPeerState }
DESCRIPTION
"The BGPBackwardTransition Event is generated
when the BGP FSM moves from a higher numbered
state to a lower numbered state."
::= 2
END
6. Acknowledgements
We would like to acknowledge the assistance of all the members of the Interconnectivity Working Group, and particularly the following individuals:
Yakov Rekhter, IBM
Rob Coltun, University of Maryland
Guy Almes, Rice University
Jeff Honig, Cornell Theory Center
Marshall T. Rose, PSI, Inc.
Dennis Ferguson, University of Toronto
Mike Mathis, PSC
7. References
[1] Cerf, V., "IAB Recommendations for the Development of Internet
Network Management Standards", RFC 1052, NRI, April 1988.
[2] Cerf, V., "Report of the Second Ad Hoc Network Management Review
Group", RFC 1109, NRI, August 1989.
[3] Rose M., and K. McCloghrie, "Structure and Identification of
Management Information for TCP/IP-based internets", RFC 1155,
Performance Systems International, Hughes LAN Systems, May 1990.
[4] McCloghrie K., and M. Rose, "Management Information Base for
Network Management of TCP/IP-based internets", RFC 1156, Hughes
LAN Systems, Performance Systems International, May 1990.
[5] Case, J., Fedor, M., Schoffstall, M., and J. Davin, "Simple
Network Management Protocol", RFC 1157, SNMP Research,
Performance Systems International, Performance Systems
International, MIT Laboratory for Computer Science, May 1990.
[6] McCloghrie K., and M. Rose, Editors, "Management Information Base
Willis & Burruss [Page 11] RFC 1269 BGP-3 MIB October 1991
for Network Management of TCP/IP-based internets", RFC 1213,
Performance Systems International, March 1991.
[7] Information processing systems - Open Systems Interconnection -
Specification of Abstract Syntax Notation One (ASN.1),
International Organization for Standardization, International
Standard 8824, December 1987.
[8] Information processing systems - Open Systems Interconnection -
Specification of Basic Encoding Rules for Abstract Notation One
(ASN.1), International Organization for Standardization,
International Standard 8825, December 1987.
[9] Rose, M., and K. McCloghrie, Editors, "Concise MIB Definitions",
RFC 1212, Performance Systems International, Hughes LAN Systems,
March 1991.
[10] Rose, M., Editor, "A Convention for Defining Traps for use with
the SNMP", RFC 1215, Performance Systems International, March
1991.
[11] Lougheed, K., and Y. Rekhter, "A Border Gateway Protocol 3 (BGP-
3)", RFC 1267, cisco Systems, T.J. Watson Research Center, IBM
Corp., October 1991.
[12] Rekhter, Y., and P. Gross, Editors, "Application of the Border
Gateway Protocol in the Internet", RFC 1268, T.J. Watson Research
Center, IBM Corp., ANS, October 1991.
8. Security Considerations
Security issues are not discussed in this memo.
Willis & Burruss [Page 12] RFC 1269 BGP-3 MIB October 1991
Authors' Addresses
Steven Willis Wellfleet Communications Inc. 15 Crosby Drive Bedford, MA 01730
Phone: (617) 275-2400 Email: swillis@wellfleet.com
John Burruss Wellfleet Communications Inc. 15 Crosby Drive Bedford, MA 01730
Phone: (617) 275-2400 Email: jburruss@wellfleet.com
Willis & Burruss [Page 13]
/data/webs/external/dokuwiki/data/pages/rfc/rfc1269.txt · Last modified: 1991/10/26 18:39 by 127.0.0.1