rfc:rfc9101
Internet Engineering Task Force (IETF) N. Sakimura Request for Comments: 9101 NAT.Consulting Category: Standards Track J. Bradley ISSN: 2070-1721 Yubico
M. Jones
Microsoft
August 2021
The OAuth 2.0 Authorization Framework: JWT-Secured Authorization Request
(JAR)
Abstract
The authorization request in OAuth 2.0 described in RFC 6749 utilizes query parameter serialization, which means that authorization request parameters are encoded in the URI of the request and sent through user agents such as web browsers. While it is easy to implement, it means that a) the communication through the user agents is not integrity protected and thus, the parameters can be tainted, b) the source of the communication is not authenticated, and c) the communication through the user agents can be monitored. Because of these weaknesses, several attacks to the protocol have now been put forward.
This document introduces the ability to send request parameters in a JSON Web Token (JWT) instead, which allows the request to be signed with JSON Web Signature (JWS) and encrypted with JSON Web Encryption (JWE) so that the integrity, source authentication, and confidentiality properties of the authorization request are attained. The request can be sent by value or by reference.
Status of This Memo
This is an Internet Standards Track document.
This document is a product of the Internet Engineering Task Force (IETF). It represents the consensus of the IETF community. It has received public review and has been approved for publication by the Internet Engineering Steering Group (IESG). Further information on Internet Standards is available in Section 2 of RFC 7841.
Information about the current status of this document, any errata, and how to provide feedback on it may be obtained at https://www.rfc-editor.org/info/rfc9101.
Copyright Notice
Copyright (c) 2021 IETF Trust and the persons identified as the document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License.
Table of Contents
1. Introduction
1.1. Requirements Language
2. Terminology
2.1. Request Object
2.2. Request Object URI
3. Symbols and Abbreviated Terms
4. Request Object
5. Authorization Request
5.1. Passing a Request Object by Value
5.2. Passing a Request Object by Reference
5.2.1. URI Referencing the Request Object
5.2.2. Request Using the "request_uri" Request Parameter
5.2.3. Authorization Server Fetches Request Object
6. Validating JWT-Based Requests
6.1. JWE Encrypted Request Object
6.2. JWS-Signed Request Object
6.3. Request Parameter Assembly and Validation
7. Authorization Server Response
8. TLS Requirements
9. IANA Considerations
9.1. OAuth Parameters Registration
9.2. OAuth Authorization Server Metadata Registry
9.3. OAuth Dynamic Client Registration Metadata Registry
9.4. Media Type Registration
9.4.1. Registry Contents
10. Security Considerations
10.1. Choice of Algorithms
10.2. Request Source Authentication
10.3. Explicit Endpoints
10.4. Risks Associated with request_uri
10.4.1. DDoS Attack on the Authorization Server
10.4.2. Request URI Rewrite
10.5. Downgrade Attack
10.6. TLS Security Considerations
10.7. Parameter Mismatches
10.8. Cross-JWT Confusion
11. Privacy Considerations
11.1. Collection Limitation
11.2. Disclosure Limitation
11.2.1. Request Disclosure
11.2.2. Tracking Using Request Object URI
12. References
12.1. Normative References
12.2. Informative References
Acknowledgements
Authors' Addresses
1. Introduction
The authorization request in OAuth 2.0 [RFC6749] utilizes query parameter serialization and is typically sent through user agents such as web browsers.
For example, the parameters "response_type", "client_id", "state", and "redirect_uri" are encoded in the URI of the request:
GET /authorize?response_type=code&client_id=s6BhdRkqt3&state=xyz
&redirect_uri=https%3A%2F%2Fclient%2Eexample%2Ecom%2Fcb HTTP/1.1
Host: server.example.com
While it is easy to implement, the encoding in the URI does not allow application-layer security to be used to provide confidentiality and integrity protection. While TLS is used to offer communication security between the client and the user agent as well as the user agent and the authorization server, TLS sessions are terminated in the user agent. In addition, TLS sessions may be terminated prematurely at some middlebox (such as a load balancer).
As a result, the authorization request of [RFC6749] has shortcomings in that:
(a) the communication through the user agents is not integrity
protected, and thus, the parameters can be tainted (integrity
protection failure);
(b) the source of the communication is not authenticated (source
authentication failure);
(c) the communication through the user agents can be monitored
(containment/confidentiality failure).
Due to these inherent weaknesses, several attacks against the protocol, such as redirection URI rewriting, have been identified.
The use of application-layer security mitigates these issues.
The use of application-layer security allows requests to be prepared by a trusted third party so that a client application cannot request more permissions than previously agreed upon.
Furthermore, passing the request by reference allows the reduction of over-the-wire overhead.
The JWT [RFC7519] encoding has been chosen because of:
(1) its close relationship with JSON, which is used as OAuth's
response format
(2) its developer friendliness due to its textual nature
(3) its relative compactness compared to XML
(4) its development status as a Proposed Standard, along with the
associated signing and encryption methods [RFC7515] [RFC7516]
(5) the relative ease of JWS and JWE compared to XML Signature and
Encryption.
The parameters "request" and "request_uri" are introduced as additional authorization request parameters for the OAuth 2.0 [RFC6749] flows. The "request" parameter is a JSON Web Token (JWT) [RFC7519] whose JWT Claims Set holds the JSON-encoded OAuth 2.0 authorization request parameters. Note that, in contrast to RFC 7519, the elements of the Claims Set are encoded OAuth request parameters [IANA.OAuth.Parameters], supplemented with only a few of the IANA-managed JSON Web Token Claims [IANA.JWT.Claims], in particular, "iss" and "aud". The JWT in the "request" parameter is integrity protected and source authenticated using JWS.
The JWT [RFC7519] can be passed to the authorization endpoint by reference, in which case the parameter "request_uri" is used instead of "request".
Using JWT [RFC7519] as the request encoding instead of query parameters has several advantages:
(a) Integrity protection. The request can be signed so that the
integrity of the request can be checked.
(b) Source authentication. The request can be signed so that the
signer can be authenticated.
(c) Confidentiality protection. The request can be encrypted so
that end-to-end confidentiality can be provided even if the TLS
connection is terminated at one point or another (including at
and before user agents).
(d) Collection minimization. The request can be signed by a trusted
third party attesting that the authorization request is
compliant with a certain policy. For example, a request can be
pre-examined by a trusted third party to confirm that all the
personal data requested is strictly necessary to perform the
process that the end user asked for; the request would then be
signed by that trusted third party. The authorization server
then examines the signature and shows the conformance status to
the end user who would have some assurance as to the legitimacy
of the request when authorizing it. In some cases, it may even
be desirable to skip the authorization dialogue under such
circumstances.
There are a few cases where request by reference is useful, such as:
1. when it is desirable to reduce the size of a transmitted request.
The use of application-layer security increases the size of the
request particularly when public-key cryptography is used.
2. when the client does not want to do the application-level
cryptography. The authorization server may provide an endpoint
to accept the authorization request through direct communication
with the client, so that the client is authenticated and the
channel is TLS protected.
This capability is in use by OpenID Connect [OpenID.Core].
1.1. Requirements Language
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here.
2. Terminology
For the purposes of this specification, the following terms and definitions apply in addition to what is defined in OAuth 2.0 Framework [RFC6749], JSON Web Signature [RFC7515], and JSON Web Encryption [RFC7516].
2.1. Request Object
A Request Object is a JSON Web Token (JWT) [RFC7519] whose JWT Claims Set holds the JSON-encoded OAuth 2.0 authorization request parameters.
2.2. Request Object URI
A Request Object URI is an absolute URI that references the set of parameters comprising an OAuth 2.0 authorization request. The content of the resource referenced by the URI is a Request Object (Section 2.1), unless the URI was provided to the client by the same authorization server, in which case the content is an implementation detail at the discretion of the authorization server. The content being a Request Object is to ensure interoperability in cases where the provider of the "request_uri" is a separate entity from the consumer, such as when a client provides a URI referencing a Request Object stored on the client's backend service that is made accessible via HTTPS. In the latter case, where the authorization server is both provider and consumer of the URI, such as when it offers an endpoint that provides a URI in exchange for a Request Object, this interoperability concern does not apply.
3. Symbols and Abbreviated Terms
The following abbreviations are common to this specification.
JSON: JavaScript Object Notation
JWT: JSON Web Token
JWS: JSON Web Signature
JWE: JSON Web Encryption
URI: Uniform Resource Identifier
URL: Uniform Resource Locator
4. Request Object
A Request Object (Section 2.1) is used to provide authorization request parameters for an OAuth 2.0 authorization request. It MUST contain all the parameters (including extension parameters) used to process the OAuth 2.0 [RFC6749] authorization request except the "request" and "request_uri" parameters that are defined in this document. The parameters are represented as the JWT Claims of the object. Parameter names and string values MUST be included as JSON strings. Since Request Objects are handled across domains and potentially outside of a closed ecosystem, per Section 8.1 of [RFC8259], these JSON strings MUST be encoded using UTF-8 [RFC3629]. Numerical values MUST be included as JSON numbers. The Request Object MAY include any extension parameters. This JSON [RFC8259] object constitutes the JWT Claims Set defined in JWT [RFC7519]. The JWT Claims Set is then signed or signed and encrypted.
To sign, JSON Web Signature (JWS) [RFC7515] is used. The result is a JWS-signed JWT [RFC7519]. If signed, the Authorization Request Object SHOULD contain the Claims "iss" (issuer) and "aud" (audience) as members with their semantics being the same as defined in the JWT [RFC7519] specification. The value of "aud" should be the value of the authorization server (AS) "issuer", as defined in RFC 8414 [RFC8414].
To encrypt, JWE [RFC7516] is used. When both signature and encryption are being applied, the JWT MUST be signed, then encrypted, as described in Section 11.2 of [RFC7519]. The result is a Nested JWT, as defined in [RFC7519].
The client determines the algorithms used to sign and encrypt Request Objects. The algorithms chosen need to be supported by both the client and the authorization server. The client can inform the authorization server of the algorithms that it supports in its dynamic client registration metadata [RFC7591], specifically, the metadata values "request_object_signing_alg", "request_object_encryption_alg", and "request_object_encryption_enc". Likewise, the authorization server can inform the client of the algorithms that it supports in its authorization server metadata [RFC8414], specifically, the metadata values "request_object_signing_alg_values_supported", "request_object_encryption_alg_values_supported", and "request_object_encryption_enc_values_supported".
The Request Object MAY be sent by value, as described in Section 5.1, or by reference, as described in Section 5.2. "request" and "request_uri" parameters MUST NOT be included in Request Objects.
A Request Object (Section 2.1) has the media type [RFC2046] "application/oauth-authz-req+jwt". Note that some existing deployments may alternatively be using the type "application/jwt".
The following is an example of the Claims in a Request Object before base64url [RFC7515] encoding and signing. Note that it includes the extension parameters "nonce" and "max_age".
{
"iss": "s6BhdRkqt3",
"aud": "https://server.example.com",
"response_type": "code id_token",
"client_id": "s6BhdRkqt3",
"redirect_uri": "https://client.example.org/cb",
"scope": "openid",
"state": "af0ifjsldkj",
"nonce": "n-0S6_WzA2Mj",
"max_age": 86400
}
Signing it with the "RS256" algorithm [RFC7518] results in this Request Object value (with line wraps within values for display purposes only):
eyJhbGciOiJSUzI1NiIsImtpZCI6ImsyYmRjIn0.ewogICAgImlzcyI6ICJzNkJoZF JrcXQzIiwKICAgICJhdWQiOiAiaHR0cHM6Ly9zZXJ2ZXIuZXhhbXBsZS5jb20iLAog ICAgInJlc3BvbnNlX3R5cGUiOiAiY29kZSBpZF90b2tlbiIsCiAgICAiY2xpZW50X2 lkIjogInM2QmhkUmtxdDMiLAogICAgInJlZGlyZWN0X3VyaSI6ICJodHRwczovL2Ns aWVudC5leGFtcGxlLm9yZy9jYiIsCiAgICAic2NvcGUiOiAib3BlbmlkIiwKICAgIC JzdGF0ZSI6ICJhZjBpZmpzbGRraiIsCiAgICAibm9uY2UiOiAibi0wUzZfV3pBMk1q IiwKICAgICJtYXhfYWdlIjogODY0MDAKfQ.Nsxa_18VUElVaPjqW_ToI1yrEJ67BgK b5xsuZRVqzGkfKrOIX7BCx0biSxYGmjK9KJPctH1OC0iQJwXu5YVY-vnW0_PLJb1C2 HG-ztVzcnKZC2gE4i0vgQcpkUOCpW3SEYXnyWnKzuKzqSb1wAZALo5f89B_p6QA6j6 JwBSRvdVsDPdulW8lKxGTbH82czCaQ50rLAg3EYLYaCb4ik4I1zGXE4fvim9FIMs8O CMmzwIB5S-ujFfzwFjoyuPEV4hJnoVUmXR_W9typPf846lGwA8h9G9oNTIuX8Ft2jf pnZdFmLg3_wr3Wa5q3a-lfbgF3S9H_8nN3j1i7tLR_5Nz-g
The following RSA public key, represented in JSON Web Key (JWK) format, can be used to validate the Request Object signature in this and subsequent Request Object examples (with line wraps within values for display purposes only):
{
"kty":"RSA",
"kid":"k2bdc",
"n":"x5RbkAZkmpRxia65qRQ1wwSMSxQUnS7gcpVTV_cdHmfmG2ltd2yabEO9XadD8
pJNZubINPpmgHh3J1aD9WRwS05ucmFq3CfFsluLt13_7oX5yDRSKX7poXmT_5
ko8k4NJZPMAO8fPToDTH7kHYbONSE2FYa5GZ60CUsFhSonI-dcMDJ0Ary9lxI
w5k2z4TAdARVWcS7sD07VhlMMshrwsPHBQgTatlkxyIHXbYdtak8fqvNAwr7O
lVEvM_Ipf5OfmdB8Sd-wjzaBsyP4VhJKoi_qdgSzpC694XZeYPq45Sw-q51iF
UlcOlTCI7z6jltUtnR6ySn6XDGFnzH5Fe5ypw",
"e":"AQAB"
}
5. Authorization Request
The client constructs the authorization request URI by adding the following parameters to the query component of the authorization endpoint URI using the "application/x-www-form-urlencoded" format:
request
REQUIRED unless "request_uri" is specified. The Request Object
(Section 2.1) that holds authorization request parameters stated
in Section 4 of [RFC6749] (OAuth 2.0). If this parameter is
present in the authorization request, "request_uri" MUST NOT be
present.
request_uri
REQUIRED unless "request" is specified. The absolute URI, as
defined by RFC 3986 [RFC3986], that is the Request Object URI
(Section 2.2) referencing the authorization request parameters
stated in Section 4 of [RFC6749] (OAuth 2.0). If this parameter
is present in the authorization request, "request" MUST NOT be
present.
client_id
REQUIRED. OAuth 2.0 [RFC6749] "client_id". The value MUST match
the "request" or "request_uri" Request Object's (Section 2.1)
"client_id".
The client directs the resource owner to the constructed URI using an HTTP redirection response or by other means available to it via the user agent.
For example, the client directs the end user's user agent to make the following HTTPS request:
GET /authz?client_id=s6BhdRkqt3&request=eyJhbG..AlMGzw HTTP/1.1 Host: server.example.com
The value for the request parameter is abbreviated for brevity.
The Authorization Request Object MUST be one of the following:
(a) JWS signed
(b) JWS signed and JWE encrypted
The client MAY send the parameters included in the Request Object duplicated in the query parameters as well for backward compatibility, etc. However, the authorization server supporting this specification MUST only use the parameters included in the Request Object.
5.1. Passing a Request Object by Value
The client sends the authorization request as a Request Object to the authorization endpoint as the "request" parameter value.
The following is an example of an authorization request using the "request" parameter (with line wraps within values for display purposes only):
https://server.example.com/authorize?client_id=s6BhdRkqt3&
request=eyJhbGciOiJSUzI1NiIsImtpZCI6ImsyYmRjIn0.ewogICAgImlzcyI6
ICJzNkJoZFJrcXQzIiwKICAgICJhdWQiOiAiaHR0cHM6Ly9zZXJ2ZXIuZXhhbXBs
ZS5jb20iLAogICAgInJlc3BvbnNlX3R5cGUiOiAiY29kZSBpZF90b2tlbiIsCiAg
ICAiY2xpZW50X2lkIjogInM2QmhkUmtxdDMiLAogICAgInJlZGlyZWN0X3VyaSI6
ICJodHRwczovL2NsaWVudC5leGFtcGxlLm9yZy9jYiIsCiAgICAic2NvcGUiOiAi
b3BlbmlkIiwKICAgICJzdGF0ZSI6ICJhZjBpZmpzbGRraiIsCiAgICAibm9uY2Ui
OiAibi0wUzZfV3pBMk1qIiwKICAgICJtYXhfYWdlIjogODY0MDAKfQ.Nsxa_18VU
ElVaPjqW_ToI1yrEJ67BgKb5xsuZRVqzGkfKrOIX7BCx0biSxYGmjK9KJPctH1OC
0iQJwXu5YVY-vnW0_PLJb1C2HG-ztVzcnKZC2gE4i0vgQcpkUOCpW3SEYXnyWnKz
uKzqSb1wAZALo5f89B_p6QA6j6JwBSRvdVsDPdulW8lKxGTbH82czCaQ50rLAg3E
YLYaCb4ik4I1zGXE4fvim9FIMs8OCMmzwIB5S-ujFfzwFjoyuPEV4hJnoVUmXR_W
9typPf846lGwA8h9G9oNTIuX8Ft2jfpnZdFmLg3_wr3Wa5q3a-lfbgF3S9H_8nN3
j1i7tLR_5Nz-g
5.2. Passing a Request Object by Reference
The "request_uri" authorization request parameter enables OAuth authorization requests to be passed by reference rather than by value. This parameter is used identically to the "request" parameter, except that the Request Object value is retrieved from the resource identified by the specified URI rather than passed by value.
The entire Request URI SHOULD NOT exceed 512 ASCII characters. There are two reasons for this restriction:
1. Many phones on the market as of this writing still do not accept
large payloads. The restriction is typically either 512 or 1024
ASCII characters.
2. On a slow connection such as a 2G mobile connection, a large URL
would cause a slow response; therefore, the use of such is not
advisable from the user-experience point of view.
The contents of the resource referenced by the "request_uri" MUST be a Request Object and MUST be reachable by the authorization server unless the URI was provided to the client by the authorization server. In the first case, the "request_uri" MUST be an "https" URI, as specified in Section 2.7.2 of [RFC7230]. In the second case, it MUST be a URN, as specified in [RFC8141].
The following is an example of the contents of a Request Object resource that can be referenced by a "request_uri" (with line wraps within values for display purposes only):
eyJhbGciOiJSUzI1NiIsImtpZCI6ImsyYmRjIn0.ewogICAgImlzcyI6ICJzNkJoZF JrcXQzIiwKICAgICJhdWQiOiAiaHR0cHM6Ly9zZXJ2ZXIuZXhhbXBsZS5jb20iLAog ICAgInJlc3BvbnNlX3R5cGUiOiAiY29kZSBpZF90b2tlbiIsCiAgICAiY2xpZW50X2 lkIjogInM2QmhkUmtxdDMiLAogICAgInJlZGlyZWN0X3VyaSI6ICJodHRwczovL2Ns aWVudC5leGFtcGxlLm9yZy9jYiIsCiAgICAic2NvcGUiOiAib3BlbmlkIiwKICAgIC JzdGF0ZSI6ICJhZjBpZmpzbGRraiIsCiAgICAibm9uY2UiOiAibi0wUzZfV3pBMk1q IiwKICAgICJtYXhfYWdlIjogODY0MDAKfQ.Nsxa_18VUElVaPjqW_ToI1yrEJ67BgK b5xsuZRVqzGkfKrOIX7BCx0biSxYGmjK9KJPctH1OC0iQJwXu5YVY-vnW0_PLJb1C2 HG-ztVzcnKZC2gE4i0vgQcpkUOCpW3SEYXnyWnKzuKzqSb1wAZALo5f89B_p6QA6j6 JwBSRvdVsDPdulW8lKxGTbH82czCaQ50rLAg3EYLYaCb4ik4I1zGXE4fvim9FIMs8O CMmzwIB5S-ujFfzwFjoyuPEV4hJnoVUmXR_W9typPf846lGwA8h9G9oNTIuX8Ft2jf pnZdFmLg3_wr3Wa5q3a-lfbgF3S9H_8nN3j1i7tLR_5Nz-g
5.2.1. URI Referencing the Request Object
The client stores the Request Object resource either locally or remotely at a URI the authorization server can access. Such a facility may be provided by the authorization server or a trusted third party. For example, the authorization server may provide a URL to which the client POSTs the Request Object and obtains the Request URI. This URI is the Request Object URI, "request_uri".
It is possible for the Request Object to include values that are to be revealed only to the authorization server. As such, the "request_uri" MUST have appropriate entropy for its lifetime so that the URI is not guessable if publicly retrievable. For the guidance, refer to Section 5.1.4.2.2 of [RFC6819] and "Good Practices for Capability URLs" [CapURLs]. It is RECOMMENDED that the "request_uri" be removed after a reasonable timeout unless access control measures are taken.
The following is an example of a Request Object URI value (with line wraps within values for display purposes only). In this example, a trusted third-party service hosts the Request Object.
https://tfp.example.org/request.jwt/
GkurKxf5T0Y-mnPFCHqWOMiZi4VS138cQO_V7PZHAdM
5.2.2. Request Using the "request_uri" Request Parameter
The client sends the authorization request to the authorization endpoint.
The following is an example of an authorization request using the "request_uri" parameter (with line wraps within values for display purposes only):
https://server.example.com/authorize?
client_id=s6BhdRkqt3
&request_uri=https%3A%2F%2Ftfp.example.org%2Frequest.jwt
%2FGkurKxf5T0Y-mnPFCHqWOMiZi4VS138cQO_V7PZHAdM
5.2.3. Authorization Server Fetches Request Object
Upon receipt of the Request, the authorization server MUST send an HTTP "GET" request to the "request_uri" to retrieve the referenced Request Object unless the Request Object is stored in a way so that the server can retrieve it through other mechanisms securely and parse it to recreate the authorization request parameters.
The following is an example of this fetch process. In this example, a trusted third-party service hosts the Request Object.
GET /request.jwt/GkurKxf5T0Y-mnPFCHqWOMiZi4VS138cQO_V7PZHAdM HTTP/1.1 Host: tfp.example.org
The following is an example of the fetch response:
HTTP/1.1 200 OK Date: Thu, 20 Aug 2020 23:52:39 GMT Server: Apache/2.4.43 (tfp.example.org) Content-type: application/oauth-authz-req+jwt Content-Length: 797 Last-Modified: Wed, 19 Aug 2020 23:52:32 GMT
eyJhbGciOiJSUzI1NiIsImtpZCI6ImsyYmRjIn0.ewogICAgImlzcyI6ICJzNkJoZF JrcXQzIiwKICAgICJhdWQiOiAiaHR0cHM6Ly9zZXJ2ZXIuZXhhbXBsZS5jb20iLAog ICAgInJlc3BvbnNlX3R5cGUiOiAiY29kZSBpZF90b2tlbiIsCiAgICAiY2xpZW50X2 lkIjogInM2QmhkUmtxdDMiLAogICAgInJlZGlyZWN0X3VyaSI6ICJodHRwczovL2Ns aWVudC5leGFtcGxlLm9yZy9jYiIsCiAgICAic2NvcGUiOiAib3BlbmlkIiwKICAgIC JzdGF0ZSI6ICJhZjBpZmpzbGRraiIsCiAgICAibm9uY2UiOiAibi0wUzZfV3pBMk1q IiwKICAgICJtYXhfYWdlIjogODY0MDAKfQ.Nsxa_18VUElVaPjqW_ToI1yrEJ67BgK b5xsuZRVqzGkfKrOIX7BCx0biSxYGmjK9KJPctH1OC0iQJwXu5YVY-vnW0_PLJb1C2 HG-ztVzcnKZC2gE4i0vgQcpkUOCpW3SEYXnyWnKzuKzqSb1wAZALo5f89B_p6QA6j6 JwBSRvdVsDPdulW8lKxGTbH82czCaQ50rLAg3EYLYaCb4ik4I1zGXE4fvim9FIMs8O CMmzwIB5S-ujFfzwFjoyuPEV4hJnoVUmXR_W9typPf846lGwA8h9G9oNTIuX8Ft2jf pnZdFmLg3_wr3Wa5q3a-lfbgF3S9H_8nN3j1i7tLR_5Nz-g
6. Validating JWT-Based Requests
6.1. JWE Encrypted Request Object
If the Request Object is encrypted, the authorization server MUST decrypt the JWT in accordance with the JSON Web Encryption [RFC7516] specification.
The result is a signed Request Object.
If decryption fails, the authorization server MUST return an "invalid_request_object" error to the client in response to the authorization request.
6.2. JWS-Signed Request Object
The authorization server MUST validate the signature of the JWS- signed [RFC7515] Request Object. If a "kid" Header Parameter is present, the key identified MUST be the key used and MUST be a key associated with the client. The signature MUST be validated using a key associated with the client and the algorithm specified in the "alg" Header Parameter. Algorithm verification MUST be performed, as specified in Sections 3.1 and 3.2 of [RFC8725].
If the key is not associated with the client or if signature validation fails, the authorization server MUST return an "invalid_request_object" error to the client in response to the authorization request.
6.3. Request Parameter Assembly and Validation
The authorization server MUST extract the set of authorization request parameters from the Request Object value. The authorization server MUST only use the parameters in the Request Object, even if the same parameter is provided in the query parameter. The client ID values in the "client_id" request parameter and in the Request Object "client_id" claim MUST be identical. The authorization server then validates the request, as specified in OAuth 2.0 [RFC6749].
If the Client ID check or the request validation fails, then the authorization server MUST return an error to the client in response to the authorization request, as specified in Section 5.2 of [RFC6749] (OAuth 2.0).
7. Authorization Server Response
The authorization server response is created and sent to the client as in Section 4 of [RFC6749] (OAuth 2.0).
In addition, this document uses these additional error values:
invalid_request_uri
The "request_uri" in the authorization request returns an error or
contains invalid data.
invalid_request_object
The request parameter contains an invalid Request Object.
request_not_supported
The authorization server does not support the use of the "request"
parameter.
request_uri_not_supported
The authorization server does not support the use of the
"request_uri" parameter.
8. TLS Requirements
Client implementations supporting the Request Object URI method MUST support TLS, following "Recommendations for Secure Use of Transport Layer Security (TLS) and Datagram Transport Layer Security (DTLS)" [RFC7525].
To protect against information disclosure and tampering, confidentiality protection MUST be applied using TLS with a cipher suite that provides confidentiality and integrity protection.
HTTP clients MUST also verify the TLS server certificate, using DNS- ID [RFC6125], to avoid man-in-the-middle attacks. The rules and guidelines defined in [RFC6125] apply here, with the following considerations:
- Support for DNS-ID identifier type (that is, the dNSName identity
in the subjectAltName extension) is REQUIRED. Certification
authorities that issue server certificates MUST support the DNS-ID
identifier type, and the DNS-ID identifier type MUST be present in
server certificates.
- DNS names in server certificates MAY contain the wildcard
character "*".
- Clients MUST NOT use CN-ID identifiers; a Common Name field (CN
field) may be present in the server certificate's subject name but
MUST NOT be used for authentication within the rules described in
[RFC7525].
- SRV-ID and URI-ID as described in Section 6.5 of [RFC6125] MUST
NOT be used for comparison.
9. IANA Considerations
9.1. OAuth Parameters Registration
Since the Request Object is a JWT, the core JWT claims cannot be used for any purpose in the Request Object other than for what JWT dictates. Thus, they have been registered as OAuth authorization request parameters to avoid future OAuth extensions using them with different meanings.
This specification adds the following values to the "OAuth Parameters" registry [IANA.OAuth.Parameters] established by [RFC6749].
Name: "iss"
Parameter Usage Location: authorization request
Change Controller: IETF
Specification Document(s): This document and Section 4.1.1 of
[RFC7519].
Name: "sub"
Parameter Usage Location: authorization request
Change Controller: IETF
Specification Document(s): This document and Section 4.1.2 of
[RFC7519].
Name: "aud"
Parameter Usage Location: authorization request
Change Controller: IETF
Specification Document(s): This document and Section 4.1.3 of
[RFC7519].
Name: "exp"
Parameter Usage Location: authorization request
Change Controller: IETF
Specification Document(s): This document and Section 4.1.4 of
[RFC7519].
Name: "nbf"
Parameter Usage Location: authorization request
Change Controller: IETF
Specification Document(s): This document and Section 4.1.5 of
[RFC7519].
Name: "iat"
Parameter Usage Location: authorization request
Change Controller: IETF
Specification Document(s): This document and Section 4.1.6 of
[RFC7519].
Name: "jti"
Parameter Usage Location: authorization request
Change Controller: IETF
Specification Document(s): This document and Section 4.1.7 of
[RFC7519].
9.2. OAuth Authorization Server Metadata Registry
This specification adds the following value to the "OAuth Authorization Server Metadata" registry [IANA.OAuth.Parameters] established by [RFC8414].
Metadata Name: "require_signed_request_object"
Metadata Description: Indicates where authorization request needs to
be protected as Request Object and provided through either
"request" or "request_uri parameter".
Change Controller: IETF
Specification Document(s): Section 10.5 of this document.
9.3. OAuth Dynamic Client Registration Metadata Registry
This specification adds the following value to the "OAuth Dynamic Client Registration Metadata" registry [IANA.OAuth.Parameters] established by [RFC7591].
Metadata Name: "require_signed_request_object"
Metadata Description: Indicates where authorization request needs to
be protected as Request Object and provided through either
"request" or "request_uri parameter".
Change Controller: IETF
Specification Document(s): Section 10.5 of this document.
9.4. Media Type Registration
9.4.1. Registry Contents
This section registers the "application/oauth-authz-req+jwt" media type [RFC2046] in the "Media Types" registry [IANA.MediaTypes] in the manner described in [RFC6838]. It can be used to indicate that the content is a JWT containing Request Object claims.
Type name: application
Subtype name: oauth-authz-req+jwt
Required parameters: N/A
Optional parameters: N/A
Encoding considerations: binary; a Request Object is a JWT; JWT
values are encoded as a series of base64url-encoded values (some
of which may be the empty string) separated by period (".")
characters.
Security considerations: See Section 10 of RFC 9101
Interoperability considerations: N/A
Published specification: Section 4 of RFC 9101
Applications that use this media type: Applications that use Request
Objects to make an OAuth 2.0 authorization request
Fragment identifier considerations: N/A
Additional information:
Deprecated alias names for this type: N/A
Magic number(s): N/A
File extension(s): N/A
Macintosh file type code(s): N/A
Person & email address to contact for further information:
Nat Sakimura <nat@nat.consulting>
Intended usage: COMMON
Restrictions on usage: none
Author: Nat Sakimura <nat@nat.consulting>
Change controller: IETF
Provisional registration? No
10. Security Considerations
In addition to all the security considerations discussed in OAuth 2.0 [RFC6819], the security considerations in [RFC7515], [RFC7516], [RFC7518], and [RFC8725] need to be considered. Also, there are several academic papers such as [BASIN] that provide useful insight into the security properties of protocols like OAuth.
In consideration of the above, this document advises taking the following security considerations into account.
10.1. Choice of Algorithms
When sending the Authorization Request Object through the "request" parameter, it MUST be either signed using JWS [RFC7515] or signed and then encrypted using JWS [RFC7515] and JWE [RFC7516], respectively, with algorithms considered appropriate at the time.
10.2. Request Source Authentication
The source of the authorization request MUST always be verified. There are several ways to do it:
(a) Verifying the JWS Signature of the Request Object.
(b) Verifying that the symmetric key for the JWE encryption is the
correct one if the JWE is using symmetric encryption. Note,
however, that if public key encryption is used, no source
authentication is enabled by the encryption, as any party can
encrypt to the public key.
(c) Verifying the TLS Server Identity of the Request Object URI. In
this case, the authorization server MUST know out-of-band that
the client uses the Request Object URI and only the client is
covered by the TLS certificate. In general, this is not a
reliable method.
(d) When an authorization server implements a service that returns a
Request Object URI in exchange for a Request Object, the
authorization server MUST perform client authentication to
accept the Request Object and bind the client identifier to the
Request Object URI it is providing. It MUST validate the
signature, per (a). Since the Request Object URI can be
replayed, the lifetime of the Request Object URI MUST be short
and preferably one-time use. The entropy of the Request Object
URI MUST be sufficiently large. The adequate shortness of the
validity and the entropy of the Request Object URI depends on
the risk calculation based on the value of the resource being
protected. A general guidance for the validity time would be
less than a minute, and the Request Object URI is to include a
cryptographic random value of 128 bits or more at the time of
the writing of this specification.
(e) When a trusted third-party service returns a Request Object URI
in exchange for a Request Object, it MUST validate the
signature, per (a). In addition, the authorization server MUST
be trusted by the third-party service and MUST know out-of-band
that the client is also trusted by it.
10.3. Explicit Endpoints
Although this specification does not require them, research such as [BASIN] points out that it is a good practice to explicitly state the intended interaction endpoints and the message position in the sequence in a tamper-evident manner so that the intent of the initiator is unambiguous. It is RECOMMENDED by this specification to use this practice for the following endpoints defined in [RFC6749], [RFC6750], and [RFC8414]:
(a) Protected resources ("protected_resources")
(b) Authorization endpoint ("authorization_endpoint")
(c) Redirection URI ("redirect_uri")
(d) Token endpoint ("token_endpoint")
Further, if dynamic discovery is used, then this practice also applies to the discovery-related endpoints.
In [RFC6749], while the redirection URI is included in the authorization request, others are not. As a result, the same applies to the Authorization Request Object.
10.4. Risks Associated with request_uri
The introduction of "request_uri" introduces several attack possibilities. Consult the security considerations in Section 7 of [RFC3986] for more information regarding risks associated with URIs.
10.4.1. DDoS Attack on the Authorization Server
A set of malicious clients can launch a DoS attack to the authorization server by pointing the "request_uri" to a URI that returns extremely large content or is extremely slow to respond. Under such an attack, the server may use up its resource and start failing.
Similarly, a malicious client can specify a "request_uri" value that itself points to an authorization request URI that uses "request_uri" to cause the recursive lookup.
To prevent such an attack from succeeding, the server should a) check that the value of the "request_uri" parameter does not point to an unexpected location, b) check that the media type of the response is "application/oauth-authz-req+jwt", c) implement a timeout for obtaining the content of "request_uri", and d) not perform recursive GET on the "request_uri".
10.4.2. Request URI Rewrite
The value of "request_uri" is not signed; thus, it can be tampered with by a man-in-the-browser attacker. Several attack possibilities arise because of this. For example, a) an attacker may create another file that the rewritten URI points to, making it possible to request extra scope, or b) an attacker may launch a DoS attack on a victim site by setting the value of "request_uri" to be that of the victim.
To prevent such an attack from succeeding, the server should a) check that the value of the "request_uri" parameter does not point to an unexpected location, b) check that the media type of the response is "application/oauth-authz-req+jwt", and c) implement a timeout for obtaining the content of "request_uri".
10.5. Downgrade Attack
Unless the protocol used by the client and the server is locked down to use an OAuth JWT-Secured Authorization Request (JAR), it is possible for an attacker to use RFC 6749 requests to bypass all the protection provided by this specification.
To prevent this kind of attack, this specification defines new client metadata and server metadata values, both named "require_signed_request_object", whose values are both booleans.
When the value of it as client metadata is "true", then the server MUST reject the authorization request from the client that does not conform to this specification. It MUST also reject the request if the Request Object uses an "alg" value of "none" when this server metadata value is "true". If omitted, the default value is "false".
When the value of it as server metadata is "true", then the server MUST reject the authorization request from any client that does not conform to this specification. It MUST also reject the request if the Request Object uses an "alg" value of "none". If omitted, the default value is "false".
Note that even if "require_signed_request_object" metadata values are not present, the client MAY use signed Request Objects, provided that there are signing algorithms mutually supported by the client and the server. Use of signing algorithm metadata is described in Section 4.
10.6. TLS Security Considerations
Current security considerations can be found in "Recommendations for Secure Use of Transport Layer Security (TLS) and Datagram Transport Layer Security (DTLS)" [RFC7525]. This supersedes the TLS version recommendations in OAuth 2.0 [RFC6749].
10.7. Parameter Mismatches
Given that OAuth parameter values are being sent in two different places, as normal OAuth parameters and as Request Object claims, implementations must guard against attacks that could use mismatching parameter values to obtain unintended outcomes. That is the reason that the two client ID values MUST match, the reason that only the parameter values from the Request Object are to be used, and the reason that neither "request" nor "request_uri" can appear in a Request Object.
10.8. Cross-JWT Confusion
As described in Section 2.8 of [RFC8725], attackers may attempt to use a JWT issued for one purpose in a context that it was not intended for. The mitigations described for these attacks can be applied to Request Objects.
One way that an attacker might attempt to repurpose a Request Object is to try to use it as a client authentication JWT, as described in Section 2.2 of [RFC7523]. A simple way to prevent this is to never use the client ID as the "sub" value in a Request Object.
Another way to prevent cross-JWT confusion is to use explicit typing, as described in Section 3.11 of [RFC8725]. One would explicitly type a Request Object by including a "typ" Header Parameter with the value "oauth-authz-req+jwt" (which is registered in Section 9.4.1). Note, however, that requiring explicitly typed Request Objects at existing authorization servers will break most existing deployments, as existing clients are already commonly using untyped Request Objects, especially with OpenID Connect [OpenID.Core]. However, requiring explicit typing would be a good idea for new OAuth deployment profiles where compatibility with existing deployments is not a consideration.
Finally, yet another way to prevent cross-JWT confusion is to use a key management regime in which keys used to sign Request Objects are identifiably distinct from those used for other purposes. Then, if an adversary attempts to repurpose the Request Object in another context, a key mismatch will occur, thwarting the attack.
11. Privacy Considerations
When the client is being granted access to a protected resource containing personal data, both the client and the authorization server need to adhere to Privacy Principles. "Privacy Considerations for Internet Protocols" [RFC6973] gives excellent guidance on the enhancement of protocol design and implementation. The provisions listed in it should be followed.
Most of the provisions would apply to "The OAuth 2.0 Authorization Framework" [RFC6749] and "The OAuth 2.0 Authorization Framework: Bearer Token Usage" [RFC6750] and are not specific to this specification. In what follows, only the provisions specific to this specification are noted.
11.1. Collection Limitation
When the client is being granted access to a protected resource containing personal data, the client SHOULD limit the collection of personal data to that which is within the bounds of applicable law and strictly necessary for the specified purpose(s).
It is often hard for the user to find out if the personal data asked for is strictly necessary. A trusted third-party service can help the user by examining the client request, comparing it to the proposed processing by the client, and certifying the request. After the certification, the client, when making an authorization request, can submit an authorization request to the trusted third-party service to obtain the Request Object URI. This process has two steps:
(1) (Certification Process) The trusted third-party service examines
the business process of the client and determines what claims
they need; this is the certification process. Once the client
is certified, they are issued a client credential to
authenticate against to push Request Objects to the trusted
third-party service to get the "request_uri".
(2) (Translation Process) The client uses the client credential that
it got to push the Request Object to the trusted third-party
service to get the "request_uri". The trusted third-party
service also verifies that the Request Object is consistent with
the claims that the client is eligible for, per the prior step.
Upon receiving such a Request Object URI in the authorization request, the authorization server first verifies that the authority portion of the Request Object URI is a legitimate one for the trusted third-party service. Then, the authorization server issues an HTTP GET request to the Request Object URI. Upon connecting, the authorization server MUST verify that the server identity represented in the TLS certificate is legitimate for the Request Object URI. Then, the authorization server can obtain the Request Object, which includes the "client_id" representing the client.
The Consent screen MUST indicate the client and SHOULD indicate that the request has been vetted by the trusted third-party service for the adherence to the collection limitation principle.
11.2. Disclosure Limitation
11.2.1. Request Disclosure
This specification allows extension parameters. These may include potentially sensitive information. Since URI query parameters may leak through various means but most notably through referrer and browser history, if the authorization request contains a potentially sensitive parameter, the client SHOULD encrypt the Request Object using JWE [RFC7516].
Where the Request Object URI method is being used, if the Request
Object contains personally identifiable or sensitive information, the
"request_uri" SHOULD be used only once and have a short validity
period, and it MUST have sufficient entropy for the applicable
security policies unless the Request Object itself is encrypted using
JWE [RFC7516]. The adequate shortness of the validity and the
entropy of the Request Object URI depends on the risk calculation
based on the value of the resource being protected. A general
guidance for the validity time would be less than a minute, and the
Request Object URI is to include a cryptographic random value of 128
bits or more at the time of the writing of this specification.
11.2.2. Tracking Using Request Object URI
Even if the protected resource does not include personally identifiable information, it is sometimes possible to identify the user through the Request Object URI if persistent static per-user Request Object URIs are used. A third party may observe it through browser history, etc. and start correlating the user's activity using it. In a way, it is a data disclosure as well and should be avoided.
Therefore, per-user persistent Request Object URIs should be avoided. Single-use Request Object URIs are one alternative.
12. References
12.1. Normative References
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119,
DOI 10.17487/RFC2119, March 1997,
<https://www.rfc-editor.org/info/rfc2119>.
[RFC3629] Yergeau, F., "UTF-8, a transformation format of ISO
10646", STD 63, RFC 3629, DOI 10.17487/RFC3629, November
2003, <https://www.rfc-editor.org/info/rfc3629>.
[RFC3986] Berners-Lee, T., Fielding, R., and L. Masinter, "Uniform
Resource Identifier (URI): Generic Syntax", STD 66,
RFC 3986, DOI 10.17487/RFC3986, January 2005,
<https://www.rfc-editor.org/info/rfc3986>.
[RFC6125] Saint-Andre, P. and J. Hodges, "Representation and
Verification of Domain-Based Application Service Identity
within Internet Public Key Infrastructure Using X.509
(PKIX) Certificates in the Context of Transport Layer
Security (TLS)", RFC 6125, DOI 10.17487/RFC6125, March
2011, <https://www.rfc-editor.org/info/rfc6125>.
[RFC6749] Hardt, D., Ed., "The OAuth 2.0 Authorization Framework",
RFC 6749, DOI 10.17487/RFC6749, October 2012,
<https://www.rfc-editor.org/info/rfc6749>.
[RFC6750] Jones, M. and D. Hardt, "The OAuth 2.0 Authorization
Framework: Bearer Token Usage", RFC 6750,
DOI 10.17487/RFC6750, October 2012,
<https://www.rfc-editor.org/info/rfc6750>.
[RFC7230] Fielding, R., Ed. and J. Reschke, Ed., "Hypertext Transfer
Protocol (HTTP/1.1): Message Syntax and Routing",
RFC 7230, DOI 10.17487/RFC7230, June 2014,
<https://www.rfc-editor.org/info/rfc7230>.
[RFC7515] Jones, M., Bradley, J., and N. Sakimura, "JSON Web
Signature (JWS)", RFC 7515, DOI 10.17487/RFC7515, May
2015, <https://www.rfc-editor.org/info/rfc7515>.
[RFC7516] Jones, M. and J. Hildebrand, "JSON Web Encryption (JWE)",
RFC 7516, DOI 10.17487/RFC7516, May 2015,
<https://www.rfc-editor.org/info/rfc7516>.
[RFC7518] Jones, M., "JSON Web Algorithms (JWA)", RFC 7518,
DOI 10.17487/RFC7518, May 2015,
<https://www.rfc-editor.org/info/rfc7518>.
[RFC7519] Jones, M., Bradley, J., and N. Sakimura, "JSON Web Token
(JWT)", RFC 7519, DOI 10.17487/RFC7519, May 2015,
<https://www.rfc-editor.org/info/rfc7519>.
[RFC7525] Sheffer, Y., Holz, R., and P. Saint-Andre,
"Recommendations for Secure Use of Transport Layer
Security (TLS) and Datagram Transport Layer Security
(DTLS)", BCP 195, RFC 7525, DOI 10.17487/RFC7525, May
2015, <https://www.rfc-editor.org/info/rfc7525>.
[RFC8141] Saint-Andre, P. and J. Klensin, "Uniform Resource Names
(URNs)", RFC 8141, DOI 10.17487/RFC8141, April 2017,
<https://www.rfc-editor.org/info/rfc8141>.
[RFC8174] Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC
2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174,
May 2017, <https://www.rfc-editor.org/info/rfc8174>.
[RFC8259] Bray, T., Ed., "The JavaScript Object Notation (JSON) Data
Interchange Format", STD 90, RFC 8259,
DOI 10.17487/RFC8259, December 2017,
<https://www.rfc-editor.org/info/rfc8259>.
[RFC8414] Jones, M., Sakimura, N., and J. Bradley, "OAuth 2.0
Authorization Server Metadata", RFC 8414,
DOI 10.17487/RFC8414, June 2018,
<https://www.rfc-editor.org/info/rfc8414>.
12.2. Informative References
[BASIN] Basin, D., Cremers, C., and S. Meier, "Provably Repairing
the ISO/IEC 9798 Standard for Entity Authentication",
Journal of Computer Security - Security and Trust
Principles, Volume 21, Issue 6, pp. 817-846, November
2013,
<https://www.cs.ox.ac.uk/people/cas.cremers/downloads/
papers/BCM2012-iso9798.pdf>.
[CapURLs] Tennison, J., Ed., "Good Practices for Capability URLs",
W3C First Public Working Draft, 18 February 2014,
<https://www.w3.org/TR/capability-urls/>.
[IANA.JWT.Claims]
IANA, "JSON Web Token (JWT)",
<https://www.iana.org/assignments/jwt>.
[IANA.MediaTypes]
IANA, "Media Types",
<https://www.iana.org/assignments/media-types>.
[IANA.OAuth.Parameters]
IANA, "OAuth Parameters",
<https://www.iana.org/assignments/oauth-parameters>.
[OpenID.Core]
Sakimura, N., Bradley, J., Jones, M.B., de Medeiros, B.,
and C. Mortimore, "OpenID Connect Core 1.0 incorporating
errata set 1", OpenID Foundation Standards, 8 November
2014,
<http://openid.net/specs/openid-connect-core-1_0.html>.
[RFC2046] Freed, N. and N. Borenstein, "Multipurpose Internet Mail
Extensions (MIME) Part Two: Media Types", RFC 2046,
DOI 10.17487/RFC2046, November 1996,
<https://www.rfc-editor.org/info/rfc2046>.
[RFC6819] Lodderstedt, T., Ed., McGloin, M., and P. Hunt, "OAuth 2.0
Threat Model and Security Considerations", RFC 6819,
DOI 10.17487/RFC6819, January 2013,
<https://www.rfc-editor.org/info/rfc6819>.
[RFC6838] Freed, N., Klensin, J., and T. Hansen, "Media Type
Specifications and Registration Procedures", BCP 13,
RFC 6838, DOI 10.17487/RFC6838, January 2013,
<https://www.rfc-editor.org/info/rfc6838>.
[RFC6973] Cooper, A., Tschofenig, H., Aboba, B., Peterson, J.,
Morris, J., Hansen, M., and R. Smith, "Privacy
Considerations for Internet Protocols", RFC 6973,
DOI 10.17487/RFC6973, July 2013,
<https://www.rfc-editor.org/info/rfc6973>.
[RFC7523] Jones, M., Campbell, B., and C. Mortimore, "JSON Web Token
(JWT) Profile for OAuth 2.0 Client Authentication and
Authorization Grants", RFC 7523, DOI 10.17487/RFC7523, May
2015, <https://www.rfc-editor.org/info/rfc7523>.
[RFC7591] Richer, J., Ed., Jones, M., Bradley, J., Machulak, M., and
P. Hunt, "OAuth 2.0 Dynamic Client Registration Protocol",
RFC 7591, DOI 10.17487/RFC7591, July 2015,
<https://www.rfc-editor.org/info/rfc7591>.
[RFC8725] Sheffer, Y., Hardt, D., and M. Jones, "JSON Web Token Best
Current Practices", BCP 225, RFC 8725,
DOI 10.17487/RFC8725, February 2020,
<https://www.rfc-editor.org/info/rfc8725>.
Acknowledgements
The following people contributed to the creation of this document in the OAuth Working Group and other IETF roles. (Affiliations at the time of the contribution are used.)
Annabelle Backman (Amazon), Dirk Balfanz (Google), Sergey Beryozkin, Ben Campbell (as AD), Brian Campbell (Ping Identity), Roman Danyliw (as AD), Martin Duke (as AD), Vladimir Dzhuvinov (Connect2id), Lars Eggert (as AD), Joel Halpern (as GENART), Benjamin Kaduk (as AD), Stephen Kent (as SECDIR), Murray Kucherawy (as AD), Warren Kumari (as OPSDIR), Watson Ladd (as SECDIR), Torsten Lodderstedt (yes.com), Jim Manico, James H. Manger (Telstra), Kathleen Moriarty (as AD), Axel Nennker (Deutsche Telecom), John Panzer (Google), Francesca Palombini (as AD), David Recordon (Facebook), Marius Scurtescu (Google), Luke Shepard (Facebook), Filip Skokan (Auth0), Hannes Tschofenig (ARM), Éric Vyncke (as AD), and Robert Wilton (as AD).
The following people contributed to creating this document through the OpenID Connect Core 1.0 [OpenID.Core].
Brian Campbell (Ping Identity), George Fletcher (AOL), Ryo Itou (Mixi), Edmund Jay (Illumila), Breno de Medeiros (Google), Hideki Nara (TACT), and Justin Richer (MITRE).
Authors' Addresses
Nat Sakimura NAT.Consulting 2-22-17 Naka Kunitachi, Tokyo 186-0004 Japan
Phone: +81-42-580-7401 Email: nat@nat.consulting URI: https://nat.sakimura.org/
John Bradley Yubico Sucursal Talagante Casilla 177 Talagante RM Chile
Phone: +1.202.630.5272 Email: rfc9101@ve7jtb.com URI: http://www.thread-safe.com/
Michael B. Jones Microsoft One Microsoft Way Redmond, Washington 98052 United States of America
Email: mbj@microsoft.com URI: https://self-issued.info/
/home/gen.uk/domains/wiki.gen.uk/public_html/data/pages/rfc/rfc9101.txt · Last modified: 2021/08/21 07:25 by 127.0.0.1