rfc:rfc8825
Internet Engineering Task Force (IETF) H. Alvestrand Request for Comments: 8825 Google Category: Standards Track January 2021 ISSN: 2070-1721
Overview: Real-Time Protocols for Browser-Based Applications
Abstract
This document gives an overview and context of a protocol suite intended for use with real-time applications that can be deployed in browsers -- "real-time communication on the Web".
It intends to serve as a starting and coordination point to make sure that (1) all the parts that are needed to achieve this goal are findable and (2) the parts that belong in the Internet protocol suite are fully specified and on the right publication track.
This document is an applicability statement -- it does not itself specify any protocol, but it specifies which other specifications implementations are supposed to follow to be compliant with Web Real- Time Communication (WebRTC).
Status of This Memo
This is an Internet Standards Track document.
This document is a product of the Internet Engineering Task Force (IETF). It represents the consensus of the IETF community. It has received public review and has been approved for publication by the Internet Engineering Steering Group (IESG). Further information on Internet Standards is available in Section 2 of RFC 7841.
Information about the current status of this document, any errata, and how to provide feedback on it may be obtained at https://www.rfc-editor.org/info/rfc8825.
Copyright Notice
Copyright (c) 2021 IETF Trust and the persons identified as the document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License.
Table of Contents
1. Introduction 2. Principles and Terminology 2.1. Goals of This Document 2.2. Relationship between API and Protocol 2.3. On Interoperability and Innovation 2.4. Terminology 3. Architecture and Functionality Groups 4. Data Transport 5. Data Framing and Securing 6. Data Formats 7. Connection Management 8. Presentation and Control 9. Local System Support Functions 10. IANA Considerations 11. Security Considerations 12. References 12.1. Normative References 12.2. Informative References Acknowledgements Author's Address
1. Introduction
The Internet was, from very early in its lifetime, considered a possible vehicle for the deployment of real-time, interactive applications -- with the most easily imaginable being audio conversations (aka "Internet telephony") and video conferencing.
The first attempts to build such applications were dependent on special networks, special hardware, and custom-built software, often at very high prices or of low quality, placing great demands on the infrastructure.
As the available bandwidth has increased, and as processors and other hardware have become ever faster, the barriers to participation have decreased, and it has become possible to deliver a satisfactory experience on commonly available computing hardware.
Still, there are a number of barriers to the ability to communicate universally -- one of these is that there is, as of yet, no single set of communication protocols that all agree should be made available for communication; another is the sheer lack of universal identification systems (such as is served by telephone numbers or email addresses in other communications systems).
Development of "The Universal Solution" has, however, proved hard.
The last few years have also seen a new platform rise for deployment of services: the browser-embedded application, or "web application". It turns out that as long as the browser platform has the necessary interfaces, it is possible to deliver almost any kind of service on it.
Traditionally, these interfaces have been delivered by plugins, which had to be downloaded and installed separately from the browser; in the development of HTML5 [HTML5], application developers see much promise in the possibility of making those interfaces available in a standardized way within the browser.
This memo describes a set of building blocks that (1) can be made accessible and controllable through a JavaScript API in a browser and (2) together form a sufficient set of functions to allow the use of interactive audio and video in applications that communicate directly between browsers across the Internet. The resulting protocol suite is intended to enable all the applications that are described as required scenarios in the WebRTC "use cases" document [RFC7478].
Other efforts -- for instance, the W3C Web Real-Time Communications,
Web Applications Security, and Devices and Sensors Working Groups --
focus on making standardized APIs and interfaces available, within or
alongside the HTML5 effort, for those functions. This memo
concentrates on specifying the protocols and subprotocols that are
needed to specify the interactions over the network.
Operators should note that deployment of WebRTC will result in a change in the nature of signaling for real-time media on the network and may result in a shift in the kinds of devices used to create and consume such media. In the case of signaling, WebRTC session setup will typically occur over TLS-secured web technologies using application-specific protocols. Operational techniques that involve inserting network elements to interpret the Session Description Protocol (SDP) -- through either (1) the endpoint asking the network for a SIP server [RFC3361] or (2) the transparent insertion of SIP Application Layer Gateways (ALGs) -- will not work with such signaling. In the case of networks using cooperative endpoints, the approaches defined in [RFC8155] may serve as a suitable replacement for [RFC3361]. The increase in browser-based communications may also lead to a shift away from dedicated real-time-communications hardware, such as SIP desk phones. This will diminish the efficacy of operational techniques that place dedicated real-time devices on their own network segment, address range, or VLAN for purposes such as applying traffic filtering and QoS. Applying the markings described in [RFC8837] may be appropriate replacements for such techniques.
While this document formally relies on [RFC8445], at the time of its publication, the majority of WebRTC implementations support the version of Interactive Connectivity Establishment (ICE) that is described in [RFC5245] and use a pre-standard version of the Trickle ICE mechanism described in [RFC8838]. The "ice2" attribute defined in [RFC8445] can be used to detect the version in use by a remote endpoint and to provide a smooth transition from the older specification to the newer one.
This memo uses the term "WebRTC" (note the case used) to refer to the overall effort consisting of both IETF and W3C efforts.
2. Principles and Terminology
2.1. Goals of This Document
The goal of the WebRTC protocol specification is to specify a set of protocols that, if all are implemented, will allow an implementation to communicate with another implementation using audio, video, and data sent along the most direct possible path between the participants.
This document is intended to serve as the roadmap to the WebRTC specifications. It defines terms used by other parts of the WebRTC protocol specifications, lists references to other specifications that don't need further elaboration in the WebRTC context, and gives pointers to other documents that form part of the WebRTC suite.
By reading this document and the documents it refers to, it should be possible to have all information needed to implement a WebRTC- compatible implementation.
2.2. Relationship between API and Protocol
The total WebRTC effort consists of two major parts, each consisting of multiple documents:
- A protocol specification, done in the IETF
- A JavaScript API specification, defined in a series of W3C
documents [W3C.WD-webrtc] [W3C.WD-mediacapture-streams]
Together, these two specifications aim to provide an environment where JavaScript embedded in any page, when suitably authorized by its user, is able to set up communication using audio, video, and auxiliary data, as long as the browser supports these specifications. The browser environment does not constrain the types of application in which this functionality can be used.
The protocol specification does not assume that all implementations implement this API; it is not intended to be necessary for interoperation to know whether the entity one is communicating with is a browser or another device implementing the protocol specification.
The goal of cooperation between the protocol specification and the API specification is that for all options and features of the protocol specification, it should be clear which API calls to make to exercise that option or feature; similarly, for any sequence of API calls, it should be clear which protocol options and features will be invoked. Both are subject to constraints of the implementation, of course.
The following terms are used across the documents specifying the WebRTC suite, with the specific meanings given here. Not all terms are used in this document. Other terms are used per their commonly used meanings.
Agent: Undefined term. See "SDP Agent" and "ICE Agent".
Application Programming Interface (API): A specification of a set of
calls and events, usually tied to a programming language or an
abstract formal specification such as WebIDL, with its defined
semantics.
Browser: Used synonymously with "interactive user agent" as defined
in [HTML5]. See also the "WebRTC Browser" (aka "WebRTC User
Agent") definition below.
Data Channel: An abstraction that allows data to be sent between
WebRTC endpoints in the form of messages. Two endpoints can have
multiple data channels between them.
ICE Agent: An implementation of the Interactive Connectivity
Establishment (ICE) protocol [RFC8445]. An ICE Agent may also be
an SDP Agent, but there exist ICE Agents that do not use SDP (for
instance, those that use Jingle [XEP-0166]).
Interactive: Communication between multiple parties, where the
expectation is that an action from one party can cause a reaction
by another party, and the reaction can be observed by the first
party, where the total time required for the action/reaction/
observation is on the order of no more than hundreds of
milliseconds.
Media: Audio and video content. Not to be confused with
"transmission media" such as wires.
Media Path: The path that media data follows from one WebRTC
endpoint to another.
Protocol: A specification of a set of data units, their
representation, and rules for their transmission, with their
defined semantics. A protocol is usually thought of as going
between systems.
Real-Time Media: Media where the generation and display of content
are intended to occur closely together in time (on the order of no
more than hundreds of milliseconds). Real-time media can be used
to support interactive communication.
SDP Agent: The protocol implementation involved in the Session
Description Protocol (SDP) offer/answer exchange, as defined in
[RFC3264], Section 3.
Signaling: Communication that happens in order to establish, manage,
and control media paths and data paths.
Signaling Path: The communication channels used between entities
participating in signaling to transfer signaling. There may be
more entities in the signaling path than in the media path.
WebRTC Browser (also called a "WebRTC User Agent" or "WebRTC UA"):
Something that conforms to both the protocol specification and the
JavaScript API cited above.
WebRTC Non-Browser: Something that conforms to the protocol
specification but does not claim to implement the JavaScript API.
This can also be called a "WebRTC device" or "WebRTC native
application".
WebRTC Endpoint: Either a WebRTC browser or a WebRTC non-browser.
It conforms to the protocol specification.
WebRTC-Compatible Endpoint: An endpoint that is able to successfully
communicate with a WebRTC endpoint but may fail to meet some
requirements of a WebRTC endpoint. This may limit where in the
network such an endpoint can be attached or may limit the security
guarantees that it offers to others. It is not constrained by
this specification; when it is mentioned at all, it is to note the
implications on WebRTC-compatible endpoints of the requirements
placed on WebRTC endpoints.
WebRTC Gateway: A WebRTC-compatible endpoint that mediates media
traffic to non-WebRTC entities.
All WebRTC browsers are WebRTC endpoints, so any requirement on a WebRTC endpoint also applies to a WebRTC browser.
A WebRTC non-browser may be capable of hosting applications in a way that is similar to the way in which a browser can host JavaScript applications, typically by offering APIs in other languages. For instance, it may be implemented as a library that offers a C++ API intended to be loaded into applications. In this case, security considerations similar to those for JavaScript may be needed; however, since such APIs are not defined or referenced here, this document cannot give any specific rules for those interfaces.
WebRTC gateways are described in a separate document [WebRTC-Gateways].
2.3. On Interoperability and Innovation
The "Mission statement for the IETF" [RFC3935] states that "The benefit of a standard to the Internet is in interoperability - that multiple products implementing a standard are able to work together in order to deliver valuable functions to the Internet's users."
Communication on the Internet frequently occurs in two phases:
- Two parties communicate, through some mechanism, what
functionality they are both able to support.
- They use that shared communicative functionality to communicate
or, failing to find anything in common, give up on communication.
There are often many choices that can be made for communicative functionality; the history of the Internet is rife with the proposal, standardization, implementation, and success or failure of many types of options, in all sorts of protocols.
The goal of having a mandatory-to-implement function set is to prevent negotiation failure, not to preempt or prevent negotiation.
The presence of a mandatory-to-implement function set serves as a strong changer of the marketplace of deployment in that it gives a guarantee that you can communicate successfully as long as (1) you conform to a specification and (2) the other party is willing to accept communication at the base level of that specification.
The alternative (that is, not having a mandatory-to-implement function) does not mean that you cannot communicate; it merely means that in order to be part of the communications partnership, you have to implement the standard "and then some". The "and then some" is usually called a profile of some sort; in the version most antithetical to the Internet ethos, that "and then some" consists of having to use a specific vendor's product only.
2.4. Terminology
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here.
3. Architecture and Functionality Groups
For browser-based applications, the model for real-time support does
not assume that the browser will contain all the functions needed for
an application such as a telephone or a video conference. The vision
is that the browser will have the functions needed for a web
application, working in conjunction with its backend servers, to
implement these functions.
This means that two vital interfaces need specification: the protocols that browsers use to talk to each other, without any intervening servers; and the APIs that are offered for a JavaScript application to take advantage of the browser's functionality.
+------------------------+ On-the-wire
| | Protocols
| Servers |--------->
| |
| |
+------------------------+
^
|
|
| HTTPS/
| WebSockets
|
|
+----------------------------+
| JavaScript/HTML/CSS |
+----------------------------+
Other ^ ^ RTC
APIs | | APIs
+---|-----------------|------+
| | | |
| +---------+|
| | Browser || On-the-wire
| Browser | RTC || Protocols
| | Function|----------->
| | ||
| | ||
| +---------+|
+---------------------|------+
|
V
Native OS Services
Figure 1: Browser Model
Note that HTTPS and WebSockets are also offered to the JavaScript application through browser APIs.
As for all protocol and API specifications, there is no restriction that the protocols can only be used to talk to another browser; since they are fully specified, any endpoint that implements the protocols faithfully should be able to interoperate with the application running in the browser.
A commonly imagined model of deployment is depicted in Figure 2.
("JS" stands for JavaScript.)
+-----------+ +-----------+
| Web | | Web |
| | | |
| |------------------| |
| Server | Signaling Path | Server |
| | | |
+-----------+ +-----------+
/ \
/ \ Application-defined
/ \ over
/ \ HTTPS/WebSockets
/ Application-defined over \
/ HTTPS/WebSockets \
/ \
+-----------+ +-----------+
|JS/HTML/CSS| |JS/HTML/CSS|
+-----------+ +-----------+
+-----------+ +-----------+
| | | |
| | | |
| Browser |--------------------------------| Browser |
| | Media Path | |
| | | |
+-----------+ +-----------+
Figure 2: Browser RTC Trapezoid
In this drawing, the critical part to note is that the media path
("low path") goes directly between the browsers, so it has to be
conformant to the specifications of the WebRTC protocol suite; the
signaling path ("high path") goes via servers that can modify,
translate, or manipulate the signals as needed.
If the two web servers are operated by different entities, the inter- server signaling mechanism needs to be agreed upon, by either standardization or other means of agreement. Existing protocols (e.g., SIP [RFC3261] or the Extensible Messaging and Presence Protocol (XMPP) [RFC6120]) could be used between servers, while either a standards-based or proprietary protocol could be used between the browser and the web server.
For example, if both operators' servers implement SIP, SIP could be used for communication between servers, along with either a standardized signaling mechanism (e.g., SIP over WebSockets) or a proprietary signaling mechanism used between the application running in the browser and the web server. Similarly, if both operators' servers implement XMPP, XMPP could be used for communication between XMPP servers, with either a standardized signaling mechanism (e.g., XMPP over WebSockets or Bidirectional-streams Over Synchronous HTTP (BOSH) [XEP-0124]) or a proprietary signaling mechanism used between the application running in the browser and the web server.
The choice of protocols for client-server and inter-server signaling, and the definition of the translation between them, are outside the scope of the WebRTC protocol suite described in this document.
The functionality groups that are needed in the browser can be specified, more or less from the bottom up, as:
Data transport: For example, TCP and UDP, and the means to securely
set up connections between entities, as well as the functions for
deciding when to send data: congestion management, bandwidth
estimation, and so on.
Data framing: RTP, the Stream Control Transmission Protocol (SCTP),
DTLS, and other data formats that serve as containers, and their
functions for data confidentiality and integrity.
Data formats: Codec specifications, format specifications, and
functionality specifications for the data passed between systems.
Audio and video codecs, as well as formats for data and document
sharing, belong in this category. In order to make use of data
formats, a way to describe them (e.g., a session description) is
needed.
Connection management: For example, setting up connections, agreeing
on data formats, changing data formats during the duration of a
call. SDP, SIP, and Jingle/XMPP belong in this category.
Presentation and control: What needs to happen in order to ensure
that interactions behave in an unsurprising manner. This can
include floor control, screen layout, voice-activated image
switching, and other such functions, where part of the system
requires cooperation between parties. Centralized Conferencing
(XCON) [RFC6501] and Cisco/Tandberg's Telepresence
Interoperability Protocol (TIP) were some attempts at specifying
this kind of functionality; many applications have been built
without standardized interfaces to these functions.
Local system support functions: Functions that need not be specified
uniformly, because each participant may implement these functions
as they choose, without affecting the bits on the wire in a way
that others have to be cognizant of. Examples in this category
include echo cancellation (some forms of it), local authentication
and authorization mechanisms, OS access control, and the ability
to do local recording of conversations.
Within each functionality group, it is important to preserve both freedom to innovate and the ability for global communication. Freedom to innovate is helped by doing the specification in terms of interfaces, not implementation; any implementation able to communicate according to the interfaces is a valid implementation. The ability to communicate globally is helped by both (1) having core specifications be unencumbered by IPR issues and (2) having the formats and protocols be fully enough specified to allow for independent implementation.
One can think of the first three groups as forming a "media transport infrastructure" and of the last three groups as forming a "media service". In many contexts, it makes sense to use a common specification for the media transport infrastructure, which can be embedded in browsers and accessed using standard interfaces, and "let a thousand flowers bloom" in the "media service" layer; to achieve interoperable services, however, at least the first five of the six groups need to be specified.
4. Data Transport
Data transport refers to the sending and receiving of data over the network interfaces, the choice of network-layer addresses at each end of the communication, and the interaction with any intermediate entities that handle the data but do not modify it (such as Traversal Using Relays around NAT (TURN) relays).
It includes necessary functions for congestion control, retransmission, and in-order delivery.
WebRTC endpoints MUST implement the transport protocols described in [RFC8835].
5. Data Framing and Securing
The format for media transport is RTP [RFC3550]. Implementation of the Secure Real-time Transport Protocol (SRTP) [RFC3711] is REQUIRED for all implementations.
The detailed considerations for usage of functions from RTP and SRTP are given in [RFC8834]. The security considerations for the WebRTC use case are provided in [RFC8826], and the resulting security functions are described in [RFC8827].
Considerations for the transfer of data that is not in RTP format are described in [RFC8831], and a supporting protocol for establishing individual data channels is described in [RFC8832]. WebRTC endpoints MUST implement these two specifications.
WebRTC endpoints MUST implement [RFC8834], [RFC8826], [RFC8827], and the requirements they include.
6. Data Formats
The intent of this specification is to allow each communications event to use the data formats that are best suited for that particular instance, where a format is supported by both sides of the connection. However, a minimum standard is greatly helpful in order to ensure that communication can be achieved. This document specifies a minimum baseline that will be supported by all implementations of this specification and leaves further codecs to be included at the will of the implementer.
WebRTC endpoints that support audio and/or video MUST implement the codecs and profiles required in [RFC7874] and [RFC7742].
7. Connection Management
The methods, mechanisms, and requirements for setting up, negotiating, and tearing down connections comprise a large subject, and one where it is desirable to have both interoperability and freedom to innovate.
The following principles apply:
1. The WebRTC media negotiations will be capable of representing the
same SDP offer/answer semantics [RFC3264] that are used in SIP,
in such a way that it is possible to build a signaling gateway
between SIP and the WebRTC media negotiation.
2. It will be possible to gateway between legacy SIP devices that
support ICE and appropriate RTP/SDP mechanisms, codecs, and
security mechanisms without using a media gateway. A signaling
gateway to convert between the signaling on the web side and the
SIP signaling may be needed.
3. When an SDP for a new codec is specified, no other
standardization should be required for it to be possible to use
that codec in the web browsers. Adding new codecs that might
have new SDP parameters should not change the APIs between the
browser and the JavaScript application. As soon as the browsers
support the new codecs, old applications written before the
codecs were specified should automatically be able to use the new
codecs where appropriate, with no changes to the JavaScript
applications.
The particular choices made for WebRTC, and their implications for the API offered by a browser implementing WebRTC, are described in [RFC8829].
WebRTC browsers MUST implement [RFC8829].
WebRTC endpoints MUST implement those functions described in [RFC8829] that relate to the network layer (e.g., BUNDLE [RFC8843], "rtcp-mux" [RFC5761], and Trickle ICE [RFC8838]), but these endpoints do not need to support the API functionality described in [RFC8829].
8. Presentation and Control
The most important part of control is the users' control over the browser's interaction with input/output devices and communications channels. It is important that the users have some way of figuring out where their audio, video, or texting is being sent; for what purported reason; and what guarantees are made by the parties that form part of this control channel. This is largely a local function between the browser, the underlying operating system, and the user interface; this is specified in the peer connection API [W3C.WD-webrtc] and the media capture API [W3C.WD-mediacapture-streams].
WebRTC browsers MUST implement these two specifications.
9. Local System Support Functions
These functions are characterized by the fact that the quality of an implementation strongly influences the user experience, but the exact algorithm does not need coordination. In some cases (for instance, echo cancellation, as described below), the overall system definition may need to specify that the overall system needs to have some characteristics for which these facilities are useful, without requiring them to be implemented a certain way.
Local functions include echo cancellation; volume control; camera management, including focus, zoom, and pan/tilt controls (if available); and more.
One would want to see certain parts of the system conform to certain properties; for instance:
- Echo cancellation should be good enough to achieve the suppression
of acoustical feedback loops below a perceptually noticeable
level.
- Privacy concerns MUST be satisfied; for instance, if remote
control of a camera is offered, the APIs should be available to
let the local participant figure out who's controlling the camera
and possibly decide to revoke the permission for camera usage.
- Automatic Gain Control (AGC), if present, should normalize a
speaking voice into a reasonable dB range.
The requirements on WebRTC systems with regard to audio processing are found in [RFC7874], and that document includes more guidance about echo cancellation and AGC; the APIs for control of local devices are found in [W3C.WD-mediacapture-streams].
WebRTC endpoints MUST implement the processing functions in [RFC7874]. (Together with the requirement in Section 6, this means that WebRTC endpoints MUST implement the whole document.)
10. IANA Considerations
This document has no IANA actions.
11. Security Considerations
Security of the web-enabled real-time communications comes in several pieces:
Security of the components: The browsers, and other servers
involved. The most target-rich environment here is probably the
browser; the aim here should be that the introduction of these
components introduces no additional vulnerability.
Security of the communication channels: It should be easy for
participants to reassure themselves of the security of their
communication -- by verifying the crypto parameters of the links
that they participate in, and to get reassurances from the other
parties to the communication that those parties promise that
appropriate measures are taken.
Security of the partners' identities: Verifying that the
participants are who they say they are (when positive
identification is appropriate) or that their identities cannot be
uncovered (when anonymity is a goal of the application).
The security analysis, and the requirements derived from that analysis, are contained in [RFC8826].
It is also important to read the security sections of [W3C.WD-mediacapture-streams] and [W3C.WD-webrtc].
12. References
12.1. Normative References
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119,
DOI 10.17487/RFC2119, March 1997,
<https://www.rfc-editor.org/info/rfc2119>.
[RFC3264] Rosenberg, J. and H. Schulzrinne, "An Offer/Answer Model
with Session Description Protocol (SDP)", RFC 3264,
DOI 10.17487/RFC3264, June 2002,
<https://www.rfc-editor.org/info/rfc3264>.
[RFC3550] Schulzrinne, H., Casner, S., Frederick, R., and V.
Jacobson, "RTP: A Transport Protocol for Real-Time
Applications", STD 64, RFC 3550, DOI 10.17487/RFC3550,
July 2003, <https://www.rfc-editor.org/info/rfc3550>.
[RFC3711] Baugher, M., McGrew, D., Naslund, M., Carrara, E., and K.
Norrman, "The Secure Real-time Transport Protocol (SRTP)",
RFC 3711, DOI 10.17487/RFC3711, March 2004,
<https://www.rfc-editor.org/info/rfc3711>.
[RFC7742] Roach, A.B., "WebRTC Video Processing and Codec
Requirements", RFC 7742, DOI 10.17487/RFC7742, March 2016,
<https://www.rfc-editor.org/info/rfc7742>.
[RFC7874] Valin, JM. and C. Bran, "WebRTC Audio Codec and Processing
Requirements", RFC 7874, DOI 10.17487/RFC7874, May 2016,
<https://www.rfc-editor.org/info/rfc7874>.
[RFC8174] Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC
2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174,
May 2017, <https://www.rfc-editor.org/info/rfc8174>.
[RFC8445] Keranen, A., Holmberg, C., and J. Rosenberg, "Interactive
Connectivity Establishment (ICE): A Protocol for Network
Address Translator (NAT) Traversal", RFC 8445,
DOI 10.17487/RFC8445, July 2018,
<https://www.rfc-editor.org/info/rfc8445>.
[RFC8826] Rescorla, E., "Security Considerations for WebRTC",
RFC 8826, DOI 10.17487/RFC8826, January 2021,
<https://www.rfc-editor.org/info/rfc8826>.
[RFC8827] Rescorla, E., "WebRTC Security Architecture", RFC 8827,
DOI 10.17487/RFC8827, January 2021,
<https://www.rfc-editor.org/info/rfc8827>.
[RFC8829] Uberti, J., Jennings, C., and E. Rescorla, Ed.,
"JavaScript Session Establishment Protocol (JSEP)",
RFC 8829, DOI 10.17487/RFC8829, January 2021,
<https://www.rfc-editor.org/info/rfc8829>.
[RFC8831] Jesup, R., Loreto, S., and M. Tüxen, "WebRTC Data
Channels", RFC 8831, DOI 10.17487/RFC8831, January 2021,
<https://www.rfc-editor.org/info/rfc8831>.
[RFC8832] Jesup, R., Loreto, S., and M. Tüxen, "WebRTC Data Channel
Establishment Protocol", RFC 8832, DOI 10.17487/RFC8832,
January 2021, <https://www.rfc-editor.org/info/rfc8832>.
[RFC8834] Perkins, C., Westerlund, M., and J. Ott, "Media Transport
and Use of RTP in WebRTC", RFC 8834, DOI 10.17487/RFC8834,
January 2021, <https://www.rfc-editor.org/info/rfc8834>.
[RFC8835] Alvestrand, H., "Transports for WebRTC", RFC 8835,
DOI 10.17487/RFC8835, January 2021,
<https://www.rfc-editor.org/info/rfc8835>.
[W3C.WD-mediacapture-streams]
Jennings, C., Aboba, B., Bruaroey, J-I., and H. Boström,
"Media Capture and Streams", W3C Candidate Recommendation,
<https://www.w3.org/TR/mediacapture-streams/>.
[W3C.WD-webrtc]
Jennings, C., Boström, H., and J-I. Bruaroey, "WebRTC 1.0:
Real-time Communication Between Browsers", W3C Proposed
Recommendation, <https://www.w3.org/TR/webrtc/>.
12.2. Informative References
[HTML5] WHATWG, "HTML - Living Standard", January 2021,
<https://html.spec.whatwg.org/>.
[RFC3261] Rosenberg, J., Schulzrinne, H., Camarillo, G., Johnston,
A., Peterson, J., Sparks, R., Handley, M., and E.
Schooler, "SIP: Session Initiation Protocol", RFC 3261,
DOI 10.17487/RFC3261, June 2002,
<https://www.rfc-editor.org/info/rfc3261>.
[RFC3361] Schulzrinne, H., "Dynamic Host Configuration Protocol
(DHCP-for-IPv4) Option for Session Initiation Protocol
(SIP) Servers", RFC 3361, DOI 10.17487/RFC3361, August
2002, <https://www.rfc-editor.org/info/rfc3361>.
[RFC3935] Alvestrand, H., "A Mission Statement for the IETF",
BCP 95, RFC 3935, DOI 10.17487/RFC3935, October 2004,
<https://www.rfc-editor.org/info/rfc3935>.
[RFC5245] Rosenberg, J., "Interactive Connectivity Establishment
(ICE): A Protocol for Network Address Translator (NAT)
Traversal for Offer/Answer Protocols", RFC 5245,
DOI 10.17487/RFC5245, April 2010,
<https://www.rfc-editor.org/info/rfc5245>.
[RFC5761] Perkins, C. and M. Westerlund, "Multiplexing RTP Data and
Control Packets on a Single Port", RFC 5761,
DOI 10.17487/RFC5761, April 2010,
<https://www.rfc-editor.org/info/rfc5761>.
[RFC6120] Saint-Andre, P., "Extensible Messaging and Presence
Protocol (XMPP): Core", RFC 6120, DOI 10.17487/RFC6120,
March 2011, <https://www.rfc-editor.org/info/rfc6120>.
[RFC6501] Novo, O., Camarillo, G., Morgan, D., and J. Urpalainen,
"Conference Information Data Model for Centralized
Conferencing (XCON)", RFC 6501, DOI 10.17487/RFC6501,
March 2012, <https://www.rfc-editor.org/info/rfc6501>.
[RFC7478] Holmberg, C., Hakansson, S., and G. Eriksson, "Web Real-
Time Communication Use Cases and Requirements", RFC 7478,
DOI 10.17487/RFC7478, March 2015,
<https://www.rfc-editor.org/info/rfc7478>.
[RFC8155] Patil, P., Reddy, T., and D. Wing, "Traversal Using Relays
around NAT (TURN) Server Auto Discovery", RFC 8155,
DOI 10.17487/RFC8155, April 2017,
<https://www.rfc-editor.org/info/rfc8155>.
[RFC8837] Jones, P., Dhesikan, S., Jennings, C., and D. Druta,
"Differentiated Services Code Point (DSCP) Packet Markings
for WebRTC QoS", RFC 8837, DOI 10.17487/RFC8837, January
2021, <https://www.rfc-editor.org/info/rfc8837>.
[RFC8838] Ivov, E., Uberti, J., and P. Saint-Andre, "Trickle ICE:
Incremental Provisioning of Candidates for the Interactive
Connectivity Establishment (ICE) Protocol", RFC 8838,
DOI 10.17487/RFC8838, January 2021,
<https://www.rfc-editor.org/info/rfc8838>.
[RFC8843] Holmberg, C., Alvestrand, H., and C. Jennings,
"Negotiating Media Multiplexing Using the Session
Description Protocol (SDP)", RFC 8843,
DOI 10.17487/RFC8843, January 2021,
<https://www.rfc-editor.org/info/rfc8843>.
[WebRTC-Gateways]
Alvestrand, H. and U. Rauschenbach, "WebRTC Gateways",
Work in Progress, Internet-Draft, draft-ietf-rtcweb-
gateways-02, 21 January 2016,
<https://tools.ietf.org/html/draft-ietf-rtcweb-gateways-
02>.
[XEP-0124] Paterson, I., Smith, D., Saint-Andre, P., Moffitt, J.,
Stout, L., and W. Tilanus, "Bidirectional-streams Over
Synchronous HTTP (BOSH)", XSF XEP 0124, November 2016,
<https://xmpp.org/extensions/xep-0124.html>.
[XEP-0166] Ludwig, S., Beda, J., Saint-Andre, P., McQueen, R., Egan,
S., and J. Hildebrand, "Jingle", XSF XEP 0166, September
2018, <https://xmpp.org/extensions/xep-0166.html>.
Acknowledgements
The number of people who have taken part in the discussions surrounding this document are too numerous to list, or even to identify. The people listed below have made special, identifiable contributions; this does not mean that others' contributions are less important.
Thanks to Cary Bran, Cullen Jennings, Colin Perkins, Magnus Westerlund, and Jörg Ott, who offered technical contributions to various draft versions of this document.
Thanks to Jonathan Rosenberg, Matthew Kaufman, and others at Skype for the ASCII drawings in Section 3.
Thanks to Alissa Cooper, Björn Höhrmann, Colin Perkins, Colton Shields, Eric Rescorla, Heath Matlock, Henry Sinnreich, Justin Uberti, Keith Drage, Magnus Westerlund, Olle E. Johansson, Sean Turner, and Simon Leinen for document review.
Author's Address
Harald T. Alvestrand Google Kungsbron 2 SE-11122 Stockholm Sweden
Email: harald@alvestrand.no
/home/gen.uk/domains/wiki.gen.uk/public_html/data/pages/rfc/rfc8825.txt · Last modified: 2021/01/18 21:34 by 127.0.0.1