rfc:rfc8766
Internet Engineering Task Force (IETF) S. Cheshire Request for Comments: 8766 Apple Inc. Category: Standards Track June 2020 ISSN: 2070-1721
Discovery Proxy for Multicast DNS-Based Service Discovery
Abstract
This document specifies a network proxy that uses Multicast DNS to automatically populate the wide-area unicast Domain Name System namespace with records describing devices and services found on the local link.
Status of This Memo
This is an Internet Standards Track document.
This document is a product of the Internet Engineering Task Force (IETF). It represents the consensus of the IETF community. It has received public review and has been approved for publication by the Internet Engineering Steering Group (IESG). Further information on Internet Standards is available in Section 2 of RFC 7841.
Information about the current status of this document, any errata, and how to provide feedback on it may be obtained at https://www.rfc-editor.org/info/rfc8766.
Copyright Notice
Copyright (c) 2020 IETF Trust and the persons identified as the document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License.
Table of Contents
1. Introduction
2. Operational Analogy
3. Conventions and Terminology Used in This Document
4. Compatibility Considerations
5. Discovery Proxy Operation
5.1. Delegated Subdomain for DNS-based Service Discovery Records
5.2. Domain Enumeration
5.2.1. Domain Enumeration via Unicast Queries
5.2.2. Domain Enumeration via Multicast Queries
5.3. Delegated Subdomain for LDH Host Names
5.4. Delegated Subdomain for Reverse Mapping
5.5. Data Translation
5.5.1. DNS TTL Limiting
5.5.2. Suppressing Unusable Records
5.5.3. NSEC and NSEC3 Queries
5.5.4. No Text-Encoding Translation
5.5.5. Application-Specific Data Translation
5.6. Answer Aggregation
6. Administrative DNS Records
6.1. DNS SOA (Start of Authority) Record
6.2. DNS NS Records
6.3. DNS Delegation Records
6.4. DNS SRV Records
6.5. Domain Enumeration Records
7. DNSSEC Considerations
7.1. Online Signing Only
7.2. NSEC and NSEC3 Records
8. IPv6 Considerations
9. Security Considerations
9.1. Authenticity
9.2. Privacy
9.3. Denial of Service
10. IANA Considerations
11. References
11.1. Normative References
11.2. Informative References
Appendix A. Implementation Status
A.1. Already Implemented and Deployed
A.2. Already Implemented
A.3. Partially Implemented
Acknowledgments
Author's Address
1. Introduction
Multicast DNS [RFC6762] and its companion technology DNS-based Service Discovery [RFC6763] were created to provide IP networking with the ease of use and autoconfiguration for which AppleTalk was well known [RFC6760] [ZC] [ROADMAP].
For a small home network consisting of just a single link (or a few physical links bridged together to appear as a single logical link from the point of view of IP), Multicast DNS [RFC6762] is sufficient for client devices to look up the ".local" host names of peers on the same home network, and to use Multicast DNS-based Service Discovery (DNS-SD) [RFC6763] to discover services offered on that home network.
For a larger network consisting of multiple links that are interconnected using IP-layer routing instead of link-layer bridging, link-local Multicast DNS alone is insufficient because link-local Multicast DNS packets, by design, are not propagated onto other links.
Using link-local multicast packets for Multicast DNS was a conscious design choice [RFC6762]. Even when limited to a single link, multicast traffic is still generally considered to be more expensive than unicast, because multicast traffic impacts many devices instead of just a single recipient. In addition, with some technologies like Wi-Fi [IEEE-11], multicast traffic is inherently less efficient and less reliable than unicast, because Wi-Fi multicast traffic is sent at lower data rates, and is not acknowledged [MCAST]. Increasing the amount of expensive multicast traffic by flooding it across multiple links would make the traffic load even worse.
Partitioning the network into many small links curtails the spread of expensive multicast traffic but limits the discoverability of services. At the opposite end of the spectrum, using a very large local link with thousands of hosts enables better service discovery but at the cost of larger amounts of multicast traffic.
Performing DNS-based Service Discovery using purely Unicast DNS is more efficient and doesn't require large multicast domains but does require that the relevant data be available in the Unicast DNS namespace. The Unicast DNS namespace in question could fall within a traditionally assigned globally unique domain name, or it could be within a private local unicast domain name such as ".home.arpa" [RFC8375].
In the DNS-SD specification [RFC6763], Section 10 ("Populating the
DNS with Information") discusses various possible ways that a
service's PTR, SRV, TXT, and address records can make their way into
the Unicast DNS namespace, including manual zone file configuration
[RFC1034] [RFC1035], DNS Update [RFC2136] [RFC3007], and proxies of
various kinds.
One option is to make the relevant data available in the Unicast DNS namespace by manual DNS configuration. This option has been used for many years at IETF meetings to advertise the IETF terminal room printer. Details of this example are given in Appendix A of the Roadmap document [ROADMAP]. However, this manual DNS configuration is labor intensive, error prone, and requires a reasonable degree of DNS expertise.
Another option is to populate the Unicast DNS namespace by having the devices offering the services do that themselves, using DNS Update [REG-PROT] [DNS-UL]. However, this requires configuration of DNS Update keys on those devices, which has proven onerous and impractical for simple devices like printers and network cameras.
Hence, to facilitate efficient and reliable DNS-based Service Discovery, a hybrid is needed that combines the ease of use of Multicast DNS with the efficiency and scalability of Unicast DNS.
This document specifies a type of proxy called a "Discovery Proxy" that uses Multicast DNS [RFC6762] to discover Multicast DNS records on its local link on demand, and makes corresponding DNS records visible in the Unicast DNS namespace.
In principle, similar mechanisms could be defined for other local discovery protocols, by creating a proxy that (i) uses the protocol in question to discover local information on demand, and then (ii) makes corresponding DNS records visible in the Unicast DNS namespace. Such mechanisms for other local discovery protocols could be addressed in future documents.
The design of the Discovery Proxy is guided by the previously published DNS-based Service Discovery requirements document [RFC7558].
In simple terms, a descriptive DNS name is chosen for each link in an organization. Using a DNS NS record, responsibility for that DNS name is delegated to a Discovery Proxy physically attached to that link. When a remote client issues a unicast query for a name falling within the delegated subdomain, the normal DNS delegation mechanism results in the unicast query arriving at the Discovery Proxy, since it has been declared authoritative for those names. Now, instead of consulting a textual zone file on disk to discover the answer to the query as a traditional authoritative DNS server would, a Discovery Proxy consults its local link, using Multicast DNS, to find the answer to the question.
For fault tolerance reasons, there may be more than one Discovery Proxy serving a given link.
Note that the Discovery Proxy uses a "pull" model. Until some remote client has requested data, the local link is not queried using Multicast DNS. In the idle state, in the absence of client requests, the Discovery Proxy sends no packets and imposes no burden on the network. It operates purely "on demand".
An alternative proposal that has been discussed is a proxy that performs DNS updates to a remote DNS server on behalf of the Multicast DNS devices on the local network. The difficulty with this is that Multicast DNS devices do not routinely announce their records on the network. Generally, they remain silent until queried. This means that the complete set of Multicast DNS records in use on a link can only be discovered by active querying, not by passive listening. Because of this, a proxy can only know what names exist on a link by issuing queries for them, and since it would be impractical to issue queries for every possible name just to find out which names exist and which do not, there is no reasonable way for a proxy to programmatically learn all the answers it would need to push up to the remote DNS server using DNS Update. Even if such a mechanism were possible, it would risk generating high load on the network continuously, even when there are no clients with any interest in that data.
Hence, having a model where the query comes to the Discovery Proxy is much more efficient than a model where the Discovery Proxy pushes the answers out to some other remote DNS server.
A client seeking to discover services and other information performs this by sending traditional DNS queries to the Discovery Proxy or by sending DNS Push Notification subscription requests [RFC8765].
How a client discovers what domain name(s) to use for its DNS-based Service Discovery queries (and, consequently, what Discovery Proxy or Proxies to use) is described in Section 5.2.
The diagram below illustrates a network topology using a Discovery Proxy to provide discovery service to a remote client.
+--------+ Unicast +-----------+ +---------+ +---------+
| Remote | Communication | Discovery | | Network | | Network |
| Client |---- . . . ----| Proxy | | Printer | | Camera |
+--------+ +-----------+ +---------+ +---------+
| | | |
------------ --------------------------------------------
Multicast-capable LAN segment (e.g., Ethernet)
Figure 1: Example Deployment
Note that there need not be any Discovery Proxy on the link to which the remote client is directly attached. The remote client communicates directly with the Discovery Proxy using normal unicast TCP/IP communication mechanisms, potentially spanning multiple IP hops, possibly including VPN tunnels and other similar long-distance communication channels.
2. Operational Analogy
A Discovery Proxy does not operate as a multicast relay or multicast forwarder. There is no danger of multicast forwarding loops that result in traffic storms, because no multicast packets are forwarded. A Discovery Proxy operates as a _proxy_ for remote clients, performing queries on their behalf and reporting the results back.
A reasonable analogy is making a telephone call to a colleague at your workplace and saying, "I'm out of the office right now. Would you mind bringing up a printer browser window and telling me the names of the printers you see?" That entails no risk of a forwarding loop causing a traffic storm, because no multicast packets are sent over the telephone call.
A similar analogy, instead of enlisting another human being to initiate the service discovery operation on your behalf, is to log in to your own desktop work computer using screen sharing and then run the printer browser yourself to see the list of printers. Or, log in using Secure Shell (ssh) and type "dns-sd -B _ipp._tcp" and observe the list of discovered printer names. In neither case is there any risk of a forwarding loop causing a traffic storm, because no multicast packets are being sent over the screen-sharing or ssh connection.
The Discovery Proxy provides another way of performing remote queries, which uses a different protocol instead of screen sharing or ssh. The Discovery Proxy mechanism can be thought of as a custom Remote Procedure Call (RPC) protocol that allows a remote client to exercise the Multicast DNS APIs on the Discovery Proxy device, just as a local client running on the Discovery Proxy device would use those APIs.
When the Discovery Proxy software performs Multicast DNS operations, the exact same Multicast DNS caching mechanisms are applied as when any other client software on that Discovery Proxy device performs Multicast DNS operations, regardless of whether that be running a printer browser client locally, a remote user running the printer browser client via a screen-sharing connection, a remote user logged in via ssh running a command-line tool like "dns-sd", or a remote user sending DNS requests that cause a Discovery Proxy to perform discovery operations on its behalf.
3. Conventions and Terminology Used in This Document
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here.
The Discovery Proxy builds on Multicast DNS, which works between hosts on the same link. For the purposes of this document, a set of hosts is considered to be "on the same link" if:
- when any host from that set sends a packet to any other host in
that set, using unicast, multicast, or broadcast, the entire link-
layer packet payload arrives unmodified, and
- a broadcast sent over that link, by any host from that set of
hosts, can be received by every other host in that set.
The link-layer _header_ may be modified, such as in Token Ring Source Routing [IEEE-5], but not the link-layer _payload_. In particular, if any device forwarding a packet modifies any part of the IP header or IP payload, then the packet is no longer considered to be on the same link. This means that the packet may pass through devices such as repeaters, bridges, hubs, or switches and still be considered to be on the same link for the purpose of this document, but not through a device such as an IP router that decrements the IP TTL or otherwise modifies the IP header.
4. Compatibility Considerations
No changes to existing devices are required to work with a Discovery Proxy.
Existing devices that advertise services using Multicast DNS work with a Discovery Proxy.
Existing clients that support DNS-based Service Discovery over Unicast DNS work with a Discovery Proxy. DNS-based Service Discovery over Unicast DNS was introduced in Mac OS X 10.4 Tiger in April 2005 and has been included in Apple products introduced since then, including the iPhone and iPad. It has also been included in products from other vendors, such as Microsoft Windows 10.
An overview of the larger collection of associated DNS-based Service Discovery technologies, and how the Discovery Proxy technology relates to those, is given in the Service Discovery Road Map document [ROADMAP].
5. Discovery Proxy Operation
In a typical configuration, a Discovery Proxy is configured to be authoritative [RFC1034] [RFC1035] for four or more DNS subdomains, listed below. Authority for these subdomains is delegated from the parent domain to the Discovery Proxy in the usual way for DNS delegation, via NS records.
A DNS subdomain for DNS-based Service Discovery records.
This subdomain name may contain rich text, including spaces and
other punctuation. This is because this subdomain name is used
only in graphical user interfaces, where rich text is appropriate.
A DNS subdomain for host name records.
This subdomain name SHOULD be limited to letters, digits, and
hyphens in order to facilitate the convenient use of host names in
command-line interfaces.
One or more DNS subdomains for IPv4 Reverse Mapping records.
These subdomains will have names that end in "in-addr.arpa".
One or more DNS subdomains for IPv6 Reverse Mapping records.
These subdomains will have names that end in "ip6.arpa".
In an enterprise network, the naming and delegation of these subdomains is typically performed by conscious action of the network administrator. In a home network, naming and delegation would typically be performed using some automatic configuration mechanism such as Home Networking Control Protocol (HNCP) [RFC7788].
These three varieties of delegated subdomains (service discovery, host names, and reverse mapping) are described below in Sections 5.1, 5.3, and 5.4.
How a client discovers where to issue its DNS-based Service Discovery queries is described in Section 5.2.
5.1. Delegated Subdomain for DNS-based Service Discovery Records
In its simplest form, each link in an organization is assigned a unique Unicast DNS domain name such as "Building 1.example.com" or "2nd Floor.Building 3.example.com". Grouping multiple links under a single Unicast DNS domain name is to be specified in a future companion document, but for the purposes of this document, assume that each link has its own unique Unicast DNS domain name. In a graphical user interface these names are not displayed as strings with dots as shown above, but something more akin to a typical file browser graphical user interface (which is harder to illustrate in a text-only document) showing folders, subfolders, and files in a file system.
+---------------+--------------+-------------+-------------------+ | *example.com* | Building 1 | 1st Floor | Alice's printer | | | Building 2 | *2nd Floor* | Bob's printer | | | *Building 3* | 3rd Floor | Charlie's printer | | | Building 4 | 4th Floor | | | | Building 5 | | | | | Building 6 | | | +---------------+--------------+-------------+-------------------+
Figure 2: Illustrative GUI
Each named link in an organization has one or more Discovery Proxies that serve it. This Discovery Proxy function could be performed by a device like a router or switch that is physically attached to that link. In the parent domain, NS records are used to delegate ownership of each defined link name (e.g., "Building 1.example.com") to one or more Discovery Proxies that serve the named link. In other words, the Discovery Proxies are the authoritative name servers for that subdomain. As in the rest of DNS-based Service Discovery, all names are represented as-is using plain UTF-8 encoding and, as described in Section 5.5.4, no text-encoding translations are performed.
With appropriate VLAN configuration [IEEE-1Q], a single Discovery Proxy device could have a logical presence on many links and serve as the Discovery Proxy for all those links. In such a configuration, the Discovery Proxy device would have a single physical Ethernet [IEEE-3] port, configured as a VLAN trunk port, which would appear to software on that device as multiple virtual Ethernet interfaces, one connected to each of the VLAN links.
As an alternative to using VLAN technology, using a Multicast DNS Discovery Relay [RELAY] is another way that a Discovery Proxy can have a "virtual" presence on a remote link.
When a DNS-SD client issues a Unicast DNS query to discover services in a particular Unicast DNS subdomain (e.g., "_ipp._tcp.Building 1.example.com. PTR ?"), the normal DNS delegation mechanism results in that query being forwarded until it reaches the delegated authoritative name server for that subdomain, namely, the Discovery Proxy on the link in question. Like a conventional Unicast DNS server, a Discovery Proxy implements the usual Unicast DNS protocol [RFC1034] [RFC1035] over UDP and TCP. However, unlike a conventional Unicast DNS server that generates answers from the data in its manually configured zone file, a Discovery Proxy learns answers using Multicast DNS. A Discovery Proxy does this by consulting its Multicast DNS cache and/or issuing Multicast DNS queries, as appropriate according to the usual protocol rules of Multicast DNS [RFC6762], for the corresponding Multicast DNS name, type, and class, with the delegated zone part of the name replaced with ".local" (e.g., in this case, "_ipp._tcp.local. PTR ?"). Then, from the received Multicast DNS data, the Discovery Proxy synthesizes the appropriate Unicast DNS response, with the ".local" top-level label of the owner name replaced with the name of the delegated zone. Further details of the name translation rules are described in Section 5.5. Rules specifying how long the Discovery Proxy should wait to accumulate Multicast DNS responses before sending its unicast reply are described in Section 5.6.
The existing Multicast DNS caching mechanism is used to minimize unnecessary Multicast DNS queries on the wire. The Discovery Proxy is acting as a client of the underlying Multicast DNS subsystem and benefits from the same caching and efficiency measures as any other client using that subsystem.
Note that the contents of the delegated zone, generated as it is by performing ".local" Multicast DNS queries, mirrors the records available on the local link via Multicast DNS very closely, but not precisely. There is not a full bidirectional equivalence between the two. Certain records that are available via Multicast DNS may not have equivalents in the delegated zone possibly because they are invalid or not relevant in the delegated zone or because they are being suppressed because they are unusable outside the local link (see Section 5.5.2). Conversely, certain records that appear in the delegated zone may not have corresponding records available on the local link via Multicast DNS. In particular, there are certain administrative SRV records (see Section 6) that logically fall within the delegated zone but semantically represent metadata _about_ the zone rather than records _within_ the zone. Consequently, these administrative records in the delegated zone do not have any corresponding counterparts in the Multicast DNS namespace of the local link.
5.2. Domain Enumeration
A DNS-SD client performs Domain Enumeration [RFC6763] via certain PTR queries, using both unicast and multicast.
If a DNS-SD client receives a Domain Name configuration via DHCP then it issues unicast queries derived from this domain name. It also issues unicast queries using names derived from its IPv4 subnet address(es) and IPv6 prefix(es). These unicast Domain Enumeration queries are described in Section 5.2.1. A DNS-SD client also issues multicast Domain Enumeration queries in the "local" domain [RFC6762], as described in Section 5.2.2. The results of all the Domain Enumeration queries are combined for DNS-based Service Discovery purposes.
5.2.1. Domain Enumeration via Unicast Queries
The (human or automated) administrator creates Unicast DNS Domain Enumeration PTR records [RFC6763] to inform clients of available service discovery domains. Two varieties of such Unicast DNS Domain Enumeration PTR records exist: those with names derived from the domain name communicated to the clients via DHCP option 15 [RFC2132], and those with names derived from either IPv4 subnet address(es) or IPv6 prefix(es) in use by the clients. Below is an example showing the name-based variety, where the DHCP server configured the client with the domain name "example.com":
b._dns-sd._udp.example.com. PTR Building 1.example.com.
PTR Building 2.example.com.
PTR Building 3.example.com.
PTR Building 4.example.com.
db._dns-sd._udp.example.com. PTR Building 1.example.com.
lb._dns-sd._udp.example.com. PTR Building 1.example.com.
The meaning of these records is defined in the DNS-based Service
Discovery specification [RFC6763] but, for convenience, is repeated
here. The "b" ("browse") records tell the client device the list of
browsing domains to display for the user to select from. The "db"
("default browse") record tells the client device which domain in
that list should be selected by default. The "db" domain MUST be one
of the domains in the "b" list; if not, then no domain is selected by
default. The "lb" ("legacy browse") record tells the client device
which domain to automatically browse on behalf of applications that
don't implement user interface for multi-domain browsing (which is
most of them at the time of writing). The "lb" domain is often the
same as the "db" domain, or sometimes the "db" domain plus one or
more others that should be included in the list of automatic browsing
domains for legacy clients.
Note that in the example above, for clarity, space characters in
names are shown as actual spaces. If this data is manually entered
into a textual zone file for authoritative server software such as
BIND, care must be taken because the space character is used as a
field separator, and other characters like dot ('.'), semicolon
(';'), dollar ('$'), backslash ('\'), etc., also have special
meaning. These characters have to be escaped when entered into a
textual zone file, following the rules in Section 5.1 of the DNS
specification [RFC1035]. For example, a literal space in a name is
represented in the textual zone file using '\032', so
"Building 1.example.com" is entered as "Building\0321.example.com".
DNS responses are limited to a maximum size of 65535 bytes. This limits the maximum number of domains that can be returned for a Domain Enumeration query as follows:
A DNS response header is 12 bytes. That's typically followed by a single qname (up to 256 bytes) plus qtype (2 bytes) and qclass (2 bytes), leaving 65275 for the Answer Section.
An Answer Section Resource Record consists of:
- Owner name, encoded as a compression pointer, 2 bytes
- RRTYPE (type PTR), 2 bytes
- RRCLASS (class IN), 2 bytes
- TTL, 4 bytes
- RDLENGTH, 2 bytes
- RDATA (domain name), up to 256 bytes
This means that each Resource Record in the Answer Section can take up to 268 bytes total, which means that the Answer Section can contain, in the worst case, no more than 243 domains.
In a more typical scenario, where the domain names are not all maximum-sized names, and there is some similarity between names so that reasonable name compression is possible, each Answer Section Resource Record may average 140 bytes, which means that the Answer Section can contain up to 466 domains.
It is anticipated that this should be sufficient for even a large corporate network or university campus.
5.2.2. Domain Enumeration via Multicast Queries
In the case where Discovery Proxy functionality is widely deployed within an enterprise (either by having a Discovery Proxy physically on each link, or by having a Discovery Proxy with a remote "virtual" presence on each link using VLANs or Multicast DNS Discovery Relays [RELAY]), this offers an additional way to provide Domain Enumeration configuration data for clients.
Note that this function of the Discovery Proxy is supplementary to the primary purpose of the Discovery Proxy, which is to facilitate _remote_ clients discovering services on the Discovery Proxy's local link. This publication of Domain Enumeration configuration data via link-local multicast on the Discovery Proxy's local link is performed for the benefit of _local_ clients attached to that link, and typically directs those clients to contact other distant Discovery Proxies attached to other links. Generally, a client does not need to use the local Discovery Proxy on its own link, because a client is generally able to perform its own Multicast DNS queries on that link. (The exception to this is when the local Wi-Fi access point is blocking or filtering local multicast traffic, requiring even local clients to use their local Discovery Proxy to perform local discovery.)
A Discovery Proxy can be configured to generate Multicast DNS responses for the following Multicast DNS Domain Enumeration queries issued by clients:
b._dns-sd._udp.local. PTR ?
db._dns-sd._udp.local. PTR ?
lb._dns-sd._udp.local. PTR ?
This provides the ability for Discovery Proxies to indicate recommended browsing domains to DNS-SD clients on a per-link granularity. In some enterprises, it may be preferable to provide this per-link configuration information in the form of Discovery Proxy configuration data rather than by populating the Unicast DNS servers with the same data (in the "ip6.arpa" or "in-addr.arpa" domains).
Regardless of how the network operator chooses to provide this configuration data, clients will perform Domain Enumeration via both unicast and multicast queries and then combine the results of these queries.
5.3. Delegated Subdomain for LDH Host Names
DNS-SD service instance names and domains are allowed to contain arbitrary Net-Unicode text [RFC5198], encoded as precomposed UTF-8 [RFC3629].
Users typically interact with service discovery software by viewing a list of discovered service instance names on a display and selecting one of them by pointing, touching, or clicking. Similarly, in software that provides a multi-domain DNS-SD user interface, users view a list of offered domains on the display and select one of them by pointing, touching, or clicking. To use a service, users don't have to remember domain or instance names, or type them; users just have to be able to recognize what they see on the display and touch or click on the thing they want.
In contrast, host names are often remembered and typed. Also, host names have historically been used in command-line interfaces where spaces can be inconvenient. For this reason, host names have traditionally been restricted to letters, digits, and hyphens (LDH) with no spaces or other punctuation.
While we do want to allow rich text for DNS-SD service instance names and domains, it is advisable, for maximum compatibility with existing usage, to restrict host names to the traditional letter-digit-hyphen rules. This means that while the service name "My Printer._ipp._tcp.Building 1.example.com" is acceptable and desirable (it is displayed in a graphical user interface as an instance called "My Printer" in the domain "Building 1" at "example.com"), the host name "My-Printer.Building 1.example.com" is less desirable (because of the space in "Building 1").
To accommodate this difference in allowable characters, a Discovery Proxy SHOULD support having two separate subdomains delegated to it for each link it serves: one whose name is allowed to contain arbitrary Net-Unicode text [RFC5198], and a second more constrained subdomain whose name is restricted to contain only letters, digits, and hyphens, to be used for host name records (names of 'A' and 'AAAA' address records). The restricted names may be any valid name consisting of only letters, digits, and hyphens, including Punycode- encoded names [RFC3492].
For example, a Discovery Proxy could have the two subdomains "Building 1.example.com" and "bldg-1.example.com" delegated to it. The Discovery Proxy would then translate these two Multicast DNS records:
My Printer._ipp._tcp.local. SRV 0 0 631 prnt.local.
prnt.local. A 203.0.113.2
into Unicast DNS records as follows:
My Printer._ipp._tcp.Building 1.example.com.
SRV 0 0 631 prnt.bldg-1.example.com.
prnt.bldg-1.example.com. A 203.0.113.2
Note that the SRV record name is translated using the rich-text
domain name ("Building 1.example.com"), and the address record name
is translated using the LDH domain ("bldg-1.example.com"). Further
details of the name translation rules are described in Section 5.5.
A Discovery Proxy MAY support only a single rich-text Net-Unicode domain and use that domain for all records, including 'A' and 'AAAA' address records, but implementers choosing this option should be aware that this choice may produce host names that are awkward to use in command-line environments. Whether or not this is an issue depends on whether users in the target environment are expected to be using command-line interfaces.
A Discovery Proxy MUST NOT be restricted to support only a letter- digit-hyphen subdomain, because that results in an unnecessarily poor user experience.
As described in Section 5.2.1, for clarity, in examples here space characters in names are shown as actual spaces. If this dynamically discovered data were to be manually entered into a textual zone file (which it isn't), then spaces would need to be represented using '\032', so "My Printer._ipp._tcp.Building 1.example.com" would become "My\032Printer._ipp._tcp.Building\0321.example.com".
Note that the '\032' representation does not appear in DNS messages sent over the air. In the wire format of DNS messages, spaces are sent as spaces, not as '\032', and likewise, in a graphical user interface at the client device, spaces are shown as spaces, not as '\032'.
5.4. Delegated Subdomain for Reverse Mapping
A Discovery Proxy can facilitate easier management of reverse mapping domains, particularly for IPv6 addresses where manual management may be more onerous than it is for IPv4 addresses.
To achieve this, in the parent domain, NS records are used to delegate ownership of the appropriate reverse mapping domain to the Discovery Proxy. In other words, the Discovery Proxy becomes the authoritative name server for the reverse mapping domain. For fault tolerance reasons, there may be more than one Discovery Proxy serving a given link.
If a given link is using the IPv4 subnet 203.0.113/24, then the domain "113.0.203.in-addr.arpa" is delegated to the Discovery Proxy for that link.
If a given link is using the IPv6 prefix 2001:0DB8:1234:5678::/64, then the domain "8.7.6.5.4.3.2.1.8.b.d.0.1.0.0.2.ip6.arpa" is delegated to the Discovery Proxy for that link.
When a reverse mapping query arrives at the Discovery Proxy, it issues the identical query on its local link, as a Multicast DNS query. The mechanism to force an apparently unicast name to be resolved using link-local Multicast DNS varies depending on the API set being used. For example, in the "dns_sd.h" APIs (available on macOS, iOS, Bonjour for Windows, Linux, and Android), using kDNSServiceFlagsForceMulticast indicates that the DNSServiceQueryRecord() call should perform the query using Multicast DNS. Other API sets have different ways of forcing multicast queries. When the host owning that IPv4 or IPv6 address responds with a name of the form "something.local", the Discovery Proxy rewrites it to use its configured LDH host name domain instead of ".local" and returns the response to the caller.
For example, a Discovery Proxy with the two subdomains "113.0.203.in-addr.arpa" and "bldg-1.example.com" delegated to it would translate this Multicast DNS record:
2.113.0.203.in-addr.arpa. PTR prnt.local.
into this Unicast DNS response:
2.113.0.203.in-addr.arpa. PTR prnt.bldg-1.example.com.
In this example the "prnt.local" host name is translated using the delegated LDH subdomain, as described in Section 5.5.
Subsequent queries for the prnt.bldg-1.example.com address record, falling as it does within the bldg-1.example.com domain, which is delegated to this Discovery Proxy, will arrive at this Discovery Proxy where they are answered by issuing Multicast DNS queries and using the received Multicast DNS answers to synthesize Unicast DNS responses, as described above.
Note that this description assumes that all addresses on a given IPv4 subnet or IPv6 prefix are mapped to host names using the Discovery Proxy mechanism. It would be possible to implement a Discovery Proxy that can be configured so that some address-to-name mappings are performed using Multicast DNS on the local link, while other address- to-name mappings within the same IPv4 subnet or IPv6 prefix are configured manually.
5.5. Data Translation
For the delegated rich-text and LDH subdomains, generating appropriate Multicast DNS queries involves translating from the configured DNS domain (e.g., "Building 1.example.com") on the Unicast DNS side to ".local" on the Multicast DNS side.
For the delegated reverse-mapping subdomain, generating appropriate Multicast DNS queries involves using the appropriate API mechanism to indicate that a query should be performed using Multicast DNS, as described in Section 5.4.
Generating appropriate Unicast DNS responses from the received Multicast DNS answers involves translating back from ".local" to the appropriate configured Unicast DNS domain as necessary, as described below.
In the examples below, the delegated subdomains are as follows:
Delegated subdomain for rich-text names Building 1.example.com. Delegated subdomain for LDH names bldg-1.example.com. Delegated subdomain for IPv4 reverse mapping 113.0.203.in-addr.arpa.
Names in Multicast DNS answers that do not end in ".local" do not require any translation.
Names in Multicast DNS answers that end in ".local" are only meaningful on the local link, and require translation to make them useable by clients outside the local link.
Names that end in ".local" may appear both as the owner names of received Multicast DNS answer records, and in the RDATA of received Multicast DNS answer records.
In a received Multicast DNS answer record, if the owner name ends with ".local", then the ".local" top-level label is replaced with the name of the delegated subdomain as was used in the originating query.
In a received Multicast DNS answer record, if a name in the RDATA ends with ".local", then the name is translated according to the delegated subdomain that was used in the originating query, as explained below.
For queries in subdomains delegated for LDH host names, ".local" names in RDATA are translated to that delegated LDH subdomain. For example, a query for "thing.bldg-1.example.com" will be translated to a Multicast DNS query for "thing.local". If that query returns this CNAME record:
thing.local. CNAME prnt.local.
then both the owner name and the name in the RDATA are translated from ".local" to the LDH subdomain "bldg-1.example.com":
thing.bldg-1.example.com. CNAME prnt.bldg-1.example.com.
For queries in subdomains delegated for reverse mapping names, ".local" names in RDATA are translated to the delegated LDH subdomain, if one is configured, or to the delegated rich-text subdomain otherwise. For example, consider a reverse mapping query that returns this PTR record:
2.113.0.203.in-addr.arpa. PTR prnt.local.
The owner name is not translated because it does not end in ".local". The name in the RDATA is translated from ".local" to the LDH subdomain "bldg-1.example.com":
2.113.0.203.in-addr.arpa. PTR prnt.bldg-1.example.com.
For queries in subdomains delegated for rich-text names, ".local" names in RDATA are translated according to whether or not they represent host names (i.e., RDATA names that are the owner names of A and AAAA DNS records). RDATA names ending in ".local" that represent host names are translated to the delegated LDH subdomain, if one is configured, or to the delegated rich-text subdomain otherwise. All other RDATA names ending in ".local" are translated to the delegated rich-text subdomain. For example, consider a DNS-SD service browsing PTR query that returns this PTR record for IPP printing:
_ipp._tcp.local. PTR My Printer._ipp._tcp.local.
Both the owner name and the name in the RDATA are translated from ".local" to the rich-text subdomain:
_ipp._tcp.Building 1.example.com.
PTR My Printer._ipp._tcp.Building 1.example.com.
In contrast, consider a query that returns this SRV record for a specific IPP printing instance:
My Printer._ipp._tcp.local. SRV 0 0 631 prnt.local.
As for all queries, the owner name is translated to the delegated subdomain of the originating query, the delegated rich-text subdomain "Building 1.example.com". However, the ".local" name in the RDATA is the target host name field of an SRV record, a field that is used exclusively for host names. Consequently it is translated to the LDH subdomain "bldg-1.example.com", if configured, instead of the rich- text subdomain:
My Printer._ipp._tcp.Building 1.example.com.
SRV 0 0 631 prnt.bldg-1.example.com.
Other beneficial translation and filtering operations are described below.
5.5.1. DNS TTL Limiting
For efficiency, Multicast DNS typically uses moderately high DNS TTL values. For example, the typical TTL on DNS-SD service browsing PTR records is 75 minutes. What makes these moderately high TTLs acceptable is the cache coherency mechanisms built in to the Multicast DNS protocol, which protect against stale data persisting for too long. When a service shuts down gracefully, it sends goodbye packets to remove its service browsing PTR record(s) immediately from neighboring caches. If a service shuts down abruptly without sending goodbye packets, the Passive Observation Of Failures (POOF) mechanism described in Section 10.5 of the Multicast DNS specification [RFC6762] comes into play to purge the cache of stale data.
A traditional Unicast DNS client on a distant remote link does not get to participate in these Multicast DNS cache coherency mechanisms on the local link. For traditional Unicast DNS queries (those received without using Long-Lived Queries (LLQ) [RFC8764] or DNS Push Notification subscriptions [RFC8765]), the DNS TTLs reported in the resulting Unicast DNS response MUST be capped to be no more than ten seconds.
Similarly, for negative responses, the negative caching TTL indicated in the SOA record [RFC2308] should also be ten seconds (see Section 6.1).
This value of ten seconds is chosen based on user-experience considerations.
For negative caching, suppose a user is attempting to access a remote device (e.g., a printer), and they are unsuccessful because that device is powered off. Suppose they then place a telephone call and ask for the device to be powered on. We want the device to become available to the user within a reasonable time period. It is reasonable to expect it to take on the order of ten seconds for a simple device with a simple embedded operating system to power on. Once the device is powered on and has announced its presence on the network via Multicast DNS, we would like it to take no more than a further ten seconds for stale negative cache entries to expire from Unicast DNS caches, making the device available to the user desiring to access it.
Similar reasoning applies to capping positive TTLs at ten seconds. In the event of a device moving location, getting a new DHCP address, or other renumbering events, we would like the updated information to be available to remote clients in a relatively timely fashion.
However, network administrators should be aware that many recursive resolvers by default are configured to impose a minimum TTL of 30 seconds. If stale data appears to be persisting in the network to the extent that it adversely impacts user experience, network administrators are advised to check the configuration of their recursive resolvers.
For received Unicast DNS queries that use LLQ [RFC8764] or DNS Push Notifications [RFC8765], the Multicast DNS record's TTL SHOULD be returned unmodified, because the notification channel exists to inform the remote client as records come and go. For further details about Long-Lived Queries and its newer replacement, DNS Push Notifications, see Section 5.6.
5.5.2. Suppressing Unusable Records
A Discovery Proxy SHOULD offer a configurable option, enabled by default, to suppress Unicast DNS answers for records that are not useful outside the local link. When the option to suppress unusable records is enabled:
- For a Discovery Proxy that is serving only clients outside the
local link, DNS A and AAAA records for IPv4 link-local addresses
[RFC3927] and IPv6 link-local addresses [RFC4862] SHOULD be
suppressed.
- Similarly, for sites that have multiple private address realms
[RFC1918], in cases where the Discovery Proxy can determine that
the querying client is in a different address realm, private
addresses SHOULD NOT be communicated to that client.
- IPv6 Unique Local Addresses [RFC4193] SHOULD be suppressed in
cases where the Discovery Proxy can determine that the querying
client is in a different IPv6 address realm.
- By the same logic, DNS SRV records that reference target host
names that have no addresses usable by the requester should be
suppressed, and likewise, DNS-SD service browsing PTR records that
point to unusable SRV records should similarly be suppressed.
5.5.3. NSEC and NSEC3 Queries
Multicast DNS devices do not routinely announce their records on the network. Generally, they remain silent until queried. This means that the complete set of Multicast DNS records in use on a link can only be discovered by active querying, not by passive listening. Because of this, a Discovery Proxy can only know what names exist on a link by issuing queries for them, and since it would be impractical to issue queries for every possible name just to find out which names exist and which do not, a Discovery Proxy cannot programmatically generate the traditional Unicast DNS NSEC [RFC4034] and NSEC3 [RFC5155] records that assert the nonexistence of a large range of names.
When queried for an NSEC or NSEC3 record type, the Discovery Proxy issues a qtype "ANY" query using Multicast DNS on the local link and then generates an NSEC or NSEC3 response with a Type Bit Map signifying which record types do and do not exist for just the specific name queried, and no other names.
Multicast DNS NSEC records received on the local link MUST NOT be forwarded unmodified to a unicast querier, because there are slight differences in the NSEC record data. In particular, Multicast DNS NSEC records do not have the NSEC bit set in the Type Bit Map, whereas conventional Unicast DNS NSEC records do have the NSEC bit set.
5.5.4. No Text-Encoding Translation
A Discovery Proxy does no translation between text encodings. Specifically, a Discovery Proxy does no translation between Punycode encoding [RFC3492] and UTF-8 encoding [RFC3629], either in the owner name of DNS records or anywhere in the RDATA of DNS records (such as the RDATA of PTR records, SRV records, NS records, or other record types like TXT, where it is ambiguous whether the RDATA may contain DNS names). All bytes are treated as-is with no attempt at text- encoding translation. A client implementing DNS-based Service Discovery [RFC6763] will use UTF-8 encoding for its unicast DNS-based Service Discovery queries, which the Discovery Proxy passes through without any text-encoding translation to the Multicast DNS subsystem. Responses from the Multicast DNS subsystem are similarly returned, without any text-encoding translation, back to the requesting unicast client.
5.5.5. Application-Specific Data Translation
There may be cases where Application-Specific Data Translation is appropriate.
For example, AirPrint printers tend to advertise fairly verbose information about their capabilities in their DNS-SD TXT record. TXT record sizes in the range of 500-1000 bytes are not uncommon. This information is a legacy from lineprinter (LPR) printing, because LPR does not have in-band capability negotiation, so all of this information is conveyed using the DNS-SD TXT record instead. Internet Printing Protocol (IPP) printing does have in-band capability negotiation, but for convenience, printers tend to include the same capability information in their IPP DNS-SD TXT records as well. For local Multicast DNS (mDNS) use, this extra TXT record information is wasteful but not fatal. However, when a Discovery Proxy aggregates data from multiple printers on a link, and sends it via unicast (via UDP or TCP), this amount of unnecessary TXT record information can result in large responses. A DNS reply over TCP carrying information about 70 printers with an average of 700 bytes per printer adds up to about 50 kilobytes of data. Therefore, a Discovery Proxy that is aware of the specifics of an application- layer protocol such as AirPrint (which uses IPP) can elide unnecessary key/value pairs from the DNS-SD TXT record for better network efficiency.
Also, the DNS-SD TXT record for many printers contains an "adminurl" key (e.g., "adminurl=http://printername.local/status.html"). For this URL to be useful outside the local link, the embedded ".local" host name needs to be translated to an appropriate name with larger scope. It is easy to translate ".local" names when they appear in well-defined places: as a record's owner name, or in domain name fields in the RDATA of record types like PTR and SRV. In the printing case, some application-specific knowledge about the semantics of the "adminurl" key is needed for the Discovery Proxy to know that it contains a name that needs to be translated. This is somewhat analogous to the need for NAT gateways to contain ALGs (Application-Level Gateways) to facilitate the correct translation of protocols that embed addresses in unexpected places.
To avoid the need for application-specific knowledge about the semantics of particular TXT record keys, protocol designers are advised to avoid placing link-local names or link-local IP addresses in TXT record keys if translation of those names or addresses would be required for off-link operation. In the printing case, the consequence of failing to translate the "adminurl" key correctly would be that, when accessed from a different link, printing will still work, but clicking the "Admin" user interface button will fail to open the printer's administration page. Rather than duplicating the host name from the service's SRV record in its "adminurl" key, thereby having the same host name appear in two places, a better design might have been to omit the host name from the "adminurl" key and instead have the client implicitly substitute the target host name from the service's SRV record in place of a missing host name in the "adminurl" key. That way, the desired host name only appears once and is in a well-defined place where software like the Discovery Proxy is expecting to find it.
Note that this kind of Application-Specific Data Translation is expected to be very rare; it is the exception rather than the rule. This is an example of a common theme in computing. It is frequently the case that it is wise to start with a clean, layered design with clear boundaries. Then, in certain special cases, those layer boundaries may be violated where the performance and efficiency benefits outweigh the inelegance of the layer violation.
These layer violations are optional. They are done primarily for efficiency reasons and generally should not be required for correct operation. A Discovery Proxy MAY operate solely at the mDNS layer without any knowledge of semantics at the DNS-SD layer or above.
5.6. Answer Aggregation
In a simple analysis, simply gathering multicast answers and forwarding them in a unicast response seems adequate, but it raises the question of how long the Discovery Proxy should wait to be sure that it has received all the Multicast DNS answers it needs to form a complete Unicast DNS response. If it waits too little time, then it risks its Unicast DNS response being incomplete. If it waits too long, then it creates a poor user experience at the client end. In fact, there may be no time that is both short enough to produce a good user experience and at the same time long enough to reliably produce complete results.
Similarly, the Discovery Proxy (the authoritative name server for the subdomain in question) needs to decide what DNS TTL to report for these records. If the TTL is too long, then the recursive resolvers issuing queries on behalf of their clients risk caching stale data for too long. If the TTL is too short, then the amount of network traffic will be more than necessary. In fact, there may be no TTL that is both short enough to avoid undesirable stale data and, at the same time, long enough to be efficient on the network.
Both these dilemmas are solved by the use of DNS Long-Lived Queries (LLQ) [RFC8764] or its newer replacement, DNS Push Notifications [RFC8765].
Clients supporting unicast DNS-based Service Discovery SHOULD implement DNS Push Notifications [RFC8765] for improved user experience.
Clients and Discovery Proxies MAY support both LLQ and DNS Push Notifications, and when talking to a Discovery Proxy that supports both, the client may use either protocol, as it chooses, though it is expected that only DNS Push Notifications will continue to be supported in the long run.
When a Discovery Proxy receives a query using LLQ or DNS Push Notifications, it responds immediately using the Multicast DNS records it already has in its cache (if any). This provides a good client user experience by providing a near-instantaneous response. Simultaneously, the Discovery Proxy issues a Multicast DNS query on the local link to discover if there are any additional Multicast DNS records it did not already know about. Should additional Multicast DNS responses be received, these are then delivered to the client using additional LLQ or DNS Push Notification update messages. The timeliness of such update messages is limited only by the timeliness of the device responding to the Multicast DNS query. If the Multicast DNS device responds quickly, then the update message is delivered quickly. If the Multicast DNS device responds slowly, then the update message is delivered slowly. The benefit of using multiple update messages to deliver results as they become available is that the Discovery Proxy can respond promptly because it doesn't have to deliver all the results in a single response that needs to be delayed to allow for the expected worst-case delay for receiving all the Multicast DNS responses.
With a proxy that supported only standard DNS queries, even if it were to try to provide reliability by assuming an excessively pessimistic worst-case time (thereby giving a very poor user experience), there would still be the risk of a slow Multicast DNS device taking even longer than that worst-case time (e.g., a device that is not even powered on until ten seconds after the initial query is received), resulting in incomplete responses. Using update messages to deliver subsequent asynchronous replies solves this dilemma: even very late responses are not lost; they are delivered in subsequent update messages.
Note that while normal DNS queries are generally received via the client's configured recursive resolver, LLQ and DNS Push Notification subscriptions may be received directly from the client.
There are two factors that determine how unicast responses are generated:
The first factor is whether or not the Discovery Proxy already has at least one record in its cache that answers the question.
The second factor is whether the client used a normal DNS query, or established a subscription using LLQ or DNS Push Notifications. Normal DNS queries are typically used for one-shot operations like SRV or address record queries. LLQ and DNS Push Notification subscriptions are typically used for long-lived service browsing PTR queries. Normal DNS queries and LLQ each have different response timing depending on the cache state, yielding the first four cases listed below. DNS Push Notifications, the newer protocol, has uniform behavior regardless of cache state, yielding the fifth case listed below.
- Standard DNS query; no answer in cache:
Issue an mDNS query on the local link, exactly as a local client
would issue an mDNS query, for the desired record name, type, and
class, including retransmissions, as appropriate, according to the
established mDNS retransmission schedule [RFC6762]. The Discovery
Proxy awaits Multicast DNS responses.
As soon as any Multicast DNS response packet is received that
contains one or more positive answers to that question (with or
without the Cache Flush bit [RFC6762] set) or a negative answer
(signified via a Multicast DNS NSEC record [RFC6762]), the
Discovery Proxy generates a Unicast DNS response message
containing the corresponding (filtered and translated) answers and
sends it to the remote client.
If after six seconds no relevant Multicast DNS answers have been
received, cancel the mDNS query and return a negative response to
the remote client. Six seconds is enough time for the underlying
Multicast DNS subsystem to transmit three mDNS queries and allow
some time for responses to arrive.
(Reasoning: Queries not using LLQ or Push Notifications are
generally queries that expect an answer from only one device, so
the first response is also the only response.)
DNS TTLs in responses MUST be capped to at most ten seconds.
- Standard DNS query; at least one answer in cache:
No local mDNS queries are performed.
The Discovery Proxy generates a Unicast DNS response message
containing the answer(s) from the cache right away, to minimize
delay.
(Reasoning: Queries not using LLQ or Push Notifications are
generally queries that expect an answer from only one device.
Given RRSet TTL harmonization, if the proxy has one Multicast DNS
answer in its cache, it can reasonably assume that it has the
whole set.)
DNS TTLs in responses MUST be capped to at most ten seconds.
- Long-Lived Query (LLQ); no answer in cache:
As in the case above with no answer in the cache, plan to perform
mDNS querying for six seconds, returning an LLQ response message
to the remote client as soon as any relevant mDNS response is
received.
If after six seconds no relevant mDNS answers have been received,
and the client has not cancelled its Long-Lived Query, return a
negative LLQ response message to the remote client.
(Reasoning: We don't need to rush to send an empty answer.)
Regardless of whether or not a relevant mDNS response is received
within six seconds, the Long-Lived Query remains active for as
long as the client maintains the LLQ state, and results in the
ongoing transmission of mDNS queries until the Long-Lived Query is
cancelled. If the set of mDNS answers changes, LLQ Event Response
messages are sent.
DNS TTLs in responses are returned unmodified.
- Long-Lived Query (LLQ); at least one answer in cache:
As in the case above with at least one answer in the cache, the
Discovery Proxy generates a unicast LLQ response message
containing the answer(s) from the cache right away, to minimize
delay.
The Long-Lived Query remains active for as long as the client
maintains the LLQ state, and results in the transmission of mDNS
queries (with appropriate Known Answer lists) to determine if
further answers are available. If the set of mDNS answers
changes, LLQ Event Response messages are sent.
(Reasoning: We want a user interface that is displayed very
rapidly yet continues to remain accurate even as the network
environment changes.)
DNS TTLs in responses are returned unmodified.
- Push Notification Subscription
The Discovery Proxy acknowledges the subscription request
immediately.
If one or more answers are already available in the cache, those
answers are then sent in an immediately following DNS PUSH
message.
The Push Notification subscription remains active until the client
cancels the subscription, and results in the transmission of mDNS
queries (with appropriate Known Answer lists) to determine if
further answers are available. If the set of mDNS answers
changes, further DNS PUSH messages are sent.
(Reasoning: We want a user interface that is displayed very
rapidly yet continues to remain accurate even as the network
environment changes.)
DNS TTLs in responses are returned unmodified.
Where the text above refers to returning "a negative response to the remote client", it is describing returning a "no error no answer" negative response, not NXDOMAIN. This is because the Discovery Proxy cannot know all the Multicast DNS domain names that may exist on a link at any given time, so any name with no answers may have child names that do exist, making it an "empty non-terminal" name.
Note that certain aspects of the behavior described here do not have to be implemented overtly by the Discovery Proxy; they occur naturally as a result of using existing Multicast DNS APIs.
For example, in the first case above (standard DNS query and no answers in the cache), if a new Multicast DNS query is requested (either by a local client on the Discovery Proxy device, or by the Discovery Proxy software on that device on behalf of a remote client), and there is not already an identical Multicast DNS query active and there are no matching answers already in the Multicast DNS cache on the Discovery Proxy device, then this will cause a series of Multicast DNS query packets to be issued with exponential backoff. The exponential backoff sequence in some implementations starts at one second and then doubles for each retransmission (0, 1, 3, 7 seconds, etc.), and in others, it starts at one second and then triples for each retransmission (0, 1, 4, 13 seconds, etc.). In either case, if no response has been received after six seconds, that is long enough that the underlying Multicast DNS implementation will have sent three query packets without receiving any response. At that point, the Discovery Proxy cancels its Multicast DNS query (so no further Multicast DNS query packets will be sent for this query) and returns a negative response to the remote client via unicast.
The six-second delay is chosen to be long enough to give enough time for devices to respond, yet short enough not to be too onerous for a human user waiting for a response. For example, using the "dig" DNS debugging tool, the current default settings result in it waiting a total of 15 seconds for a reply (three transmissions of the DNS UDP query packet, with a wait of 5 seconds after each packet), which is ample time for it to have received a negative reply from a Discovery Proxy after six seconds.
The text above states that for a standard DNS query, if at least one answer is already available in the cache, then a Discovery Proxy should not issue additional mDNS query packets. This also occurs naturally as a result of using existing Multicast DNS APIs. If a new Multicast DNS query is requested (either locally, or by the Discovery Proxy on behalf of a remote client) for which there are relevant answers already in the Multicast DNS cache on the Discovery Proxy device, and after the answers are delivered the Multicast DNS query is immediately cancelled, then no Multicast DNS query packets will be generated for this query.
6. Administrative DNS Records
6.1. DNS SOA (Start of Authority) Record
The MNAME field SHOULD contain the host name of the Discovery Proxy device (i.e., the same domain name as the RDATA of the NS record delegating the relevant zone(s) to this Discovery Proxy device).
The RNAME field SHOULD contain the mailbox of the person responsible for administering this Discovery Proxy device.
The SERIAL field MUST be zero.
Zone transfers are undefined for Discovery Proxy zones, and consequently, the REFRESH, RETRY, and EXPIRE fields have no useful meaning for Discovery Proxy zones. These fields SHOULD contain reasonable default values. The RECOMMENDED values are: REFRESH 7200, RETRY 3600, and EXPIRE 86400.
The MINIMUM field (used to control the lifetime of negative cache entries) SHOULD contain the value 10. This value is chosen based on user-experience considerations (see Section 5.5.1).
In the event that there are multiple Discovery Proxy devices on a link for fault tolerance reasons, this will result in clients receiving inconsistent SOA records (different MNAME and possibly RNAME) depending on which Discovery Proxy answers their SOA query. However, since clients generally have no reason to use the MNAME or RNAME data, this is unlikely to cause any problems.
6.2. DNS NS Records
In the event that there are multiple Discovery Proxy devices on a link for fault tolerance reasons, the parent zone MUST be configured with NS records giving the names of all the Discovery Proxy devices on the link.
Each Discovery Proxy device MUST be configured to answer NS queries for the zone apex name by giving its own NS record, and the NS records of its fellow Discovery Proxy devices on the same link, so that it can return the correct answers for NS queries.
The target host name in the RDATA of an NS record MUST NOT reference a name that falls within any zone delegated to a Discovery Proxy. Apart from the zone apex name, all other host names (names of A and AAAA DNS records) that fall within a zone delegated to a Discovery Proxy correspond to local Multicast DNS host names, which logically belong to the respective Multicast DNS hosts defending those names, not the Discovery Proxy. Generally speaking, the Discovery Proxy does not own or control the delegated zone; it is merely a conduit to the corresponding ".local" namespace, which is controlled by the Multicast DNS hosts on that link. If an NS record were to reference a manually determined host name that falls within a delegated zone, that manually determined host name may inadvertently conflict with a corresponding ".local" host name that is owned and controlled by some device on that link.
6.3. DNS Delegation Records
Since the Multicast DNS specification [RFC6762] states that there can be no delegation (subdomains) within a ".local" namespace, this implies that any name within a zone delegated to a Discovery Proxy (except for the zone apex name itself) cannot have any answers for any DNS queries for RRTYPEs SOA, NS, or DS. Consequently:
- for any query for the zone apex name of a zone delegated to a
Discovery Proxy, the Discovery Proxy MUST generate the appropriate
immediate answers as described above, and
- for any query for any name below the zone apex, for RRTYPEs SOA,
NS, or DS, the Discovery Proxy MUST generate an immediate negative
answer.
6.4. DNS SRV Records
There are certain special DNS records that logically fall within the delegated Unicast DNS subdomain, but rather than mapping to their corresponding ".local" namesakes, they actually contain metadata pertaining to the operation of the delegated Unicast DNS subdomain itself. They do not exist in the corresponding ".local" namespace of the local link. For these queries, a Discovery Proxy MUST generate immediate answers, whether positive or negative, to avoid delays while clients wait for their query to be answered.
For example, if a Discovery Proxy implements Long-Lived Queries [RFC8764], then it MUST positively respond to "_dns-llq._udp.<zone> SRV" queries, "_dns-llq._tcp.<zone> SRV" queries, and "_dns-llq-tls._tcp.<zone> SRV" queries as appropriate. If it does not implement Long-Lived Queries, it MUST return an immediate negative answer for those queries, instead of passing those queries through to the local network as Multicast DNS queries and then waiting unsuccessfully for answers that will not be forthcoming.
If a Discovery Proxy implements DNS Push Notifications [RFC8765], then it MUST positively respond to "_dns-push-tls._tcp.<zone>" queries. Otherwise, it MUST return an immediate negative answer for those queries.
A Discovery Proxy MUST return an immediate negative answer for "_dns-update._udp.<zone> SRV" queries, "_dns-update._tcp.<zone> SRV" queries, and "_dns-update-tls._tcp.<zone> SRV" queries, since using DNS Update [RFC2136] to change zones generated dynamically from local Multicast DNS data is not possible.
6.5. Domain Enumeration Records
If the network operator chooses to use address-based unicast Domain Enumeration queries for client configuration (see Section 5.2.1), and the network operator also chooses to delegate the enclosing reverse mapping subdomain to a Discovery Proxy, then that Discovery Proxy becomes responsible for serving the answers to those address-based unicast Domain Enumeration queries.
As with the SRV metadata records described above, a Discovery Proxy configured with delegated reverse mapping subdomains is responsible for generating immediate (positive or negative) answers for address- based unicast Domain Enumeration queries, rather than passing them though to the underlying Multicast DNS subsystem and then waiting unsuccessfully for answers that will not be forthcoming.
7. DNSSEC Considerations
7.1. Online Signing Only
The Discovery Proxy acts as the authoritative name server for designated subdomains, and if DNSSEC is to be used, the Discovery Proxy needs to possess a copy of the signing keys in order to generate authoritative signed data from the local Multicast DNS responses it receives. Offline signing is not applicable to Discovery Proxy.
7.2. NSEC and NSEC3 Records
In DNSSEC, NSEC and NSEC3 records are used to assert the nonexistence of certain names, also described as "authenticated denial of existence" [RFC4034] [RFC5155].
Since a Discovery Proxy only knows what names exist on the local link by issuing queries for them, and since it would be impractical to issue queries for every possible name just to find out which names exist and which do not, a Discovery Proxy cannot programmatically synthesize the traditional NSEC and NSEC3 records that assert the nonexistence of a large range of names. Instead, when generating a negative response, a Discovery Proxy programmatically synthesizes a single NSEC record asserting the nonexistence of just the specific name queried and no others. Since the Discovery Proxy has the zone signing key, it can do this on demand. Since the NSEC record asserts the nonexistence of only a single name, zone walking is not a concern, and NSEC3 is therefore not necessary.
Note that this applies only to traditional immediate DNS queries, which may return immediate negative answers when no immediate positive answer is available. When used with a DNS Push Notification subscription [RFC8765], there are no negative answers, merely the absence of answers so far, which may change in the future if answers become available.
8. IPv6 Considerations
An IPv4-only host and an IPv6-only host behave as "ships that pass in the night". Even if they are on the same Ethernet [IEEE-3], neither is aware of the other's traffic. For this reason, each link may have _two_ unrelated ".local." zones: one for IPv4 and one for IPv6. Since, for practical purposes, a group of IPv4-only hosts and a group of IPv6-only hosts on the same Ethernet act as if they were on two entirely separate Ethernet segments, it is unsurprising that their use of the ".local." zone should occur exactly as it would if they really were on two entirely separate Ethernet segments.
It will be desirable to have a mechanism to "stitch" together these two unrelated ".local." zones so that they appear as one. Such a mechanism will need to be able to differentiate between a dual-stack (v4/v6) host participating in both ".local." zones, and two different hosts: one IPv4-only and the other IPv6-only, which are both trying to use the same name(s). Such a mechanism will be specified in a future companion document.
At present, it is RECOMMENDED that a Discovery Proxy be configured with a single domain name for both the IPv4 and IPv6 ".local." zones on the local link, and when a unicast query is received, it should issue Multicast DNS queries using both IPv4 and IPv6 on the local link and then combine the results.
9. Security Considerations
9.1. Authenticity
A service proves its presence on a link by its ability to answer link-local multicast queries on that link. If greater security is desired, then the Discovery Proxy mechanism should not be used, and something with stronger security should be used instead such as authenticated secure DNS Update [RFC2136] [RFC3007].
9.2. Privacy
The Domain Name System is, generally speaking, a global public database. Records that exist in the Domain Name System name hierarchy can be queried by name from, in principle, anywhere in the world. If services on a mobile device (like a laptop computer) are made visible via the Discovery Proxy mechanism, then when those services become visible in a domain such as "My House.example.com", it might indicate to (potentially hostile) observers that the mobile device is in the owner's home. When those services disappear from "My House.example.com", that change could be used by observers to infer when the mobile device (and possibly its owner) may have left the house. The privacy of this information may be protected using techniques like firewalls, split-view DNS, and Virtual Private Networks (VPNs), as are customarily used today to protect the privacy of corporate DNS information.
The privacy issue is particularly serious for the IPv4 and IPv6 reverse zones. If the public delegation of the reverse zones points to the Discovery Proxy, and the Discovery Proxy is reachable globally, then it could leak a significant amount of information. Attackers could discover hosts that otherwise might not be easy to identify, and learn their host names. Attackers could also discover the existence of links where hosts frequently come and go.
The Discovery Proxy could provide sensitive records only to
authenticated users. This is a general DNS problem, not specific to
the Discovery Proxy. Work is underway in the IETF to tackle this
problem [RFC7626].
9.3. Denial of Service
A remote attacker could use a rapid series of unique Unicast DNS queries to induce a Discovery Proxy to generate a rapid series of corresponding Multicast DNS queries on one or more of its local links. Multicast traffic is generally more expensive than unicast traffic, especially on Wi-Fi links [MCAST], which makes this attack particularly serious. To limit the damage that can be caused by such attacks, a Discovery Proxy (or the underlying Multicast DNS subsystem that it utilizes) MUST implement Multicast DNS query rate limiting appropriate to the link technology in question. For today's 802.11b/g/n/ac Wi-Fi links (for which approximately 200 multicast packets per second is sufficient to consume approximately 100% of the wireless spectrum), a limit of 20 Multicast DNS query packets per second is RECOMMENDED. On other link technologies like Gigabit Ethernet, higher limits may be appropriate. A consequence of this rate limiting is that a rogue remote client could issue an excessive number of queries resulting in denial of service to other legitimate remote clients attempting to use that Discovery Proxy. However, this is preferable to a rogue remote client being able to inflict even greater harm on the local network, which could impact the correct operation of all local clients on that network.
10. IANA Considerations
This document has no IANA actions.
11. References
11.1. Normative References
[RFC1034] Mockapetris, P., "Domain names - concepts and facilities",
STD 13, RFC 1034, DOI 10.17487/RFC1034, November 1987,
<https://www.rfc-editor.org/info/rfc1034>.
[RFC1035] Mockapetris, P., "Domain names - implementation and
specification", STD 13, RFC 1035, DOI 10.17487/RFC1035,
November 1987, <https://www.rfc-editor.org/info/rfc1035>.
[RFC1918] Rekhter, Y., Moskowitz, B., Karrenberg, D., de Groot, G.
J., and E. Lear, "Address Allocation for Private
Internets", BCP 5, RFC 1918, DOI 10.17487/RFC1918,
February 1996, <https://www.rfc-editor.org/info/rfc1918>.
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119,
DOI 10.17487/RFC2119, March 1997,
<https://www.rfc-editor.org/info/rfc2119>.
[RFC2308] Andrews, M., "Negative Caching of DNS Queries (DNS
NCACHE)", RFC 2308, DOI 10.17487/RFC2308, March 1998,
<https://www.rfc-editor.org/info/rfc2308>.
[RFC3629] Yergeau, F., "UTF-8, a transformation format of ISO
10646", STD 63, RFC 3629, DOI 10.17487/RFC3629, November
2003, <https://www.rfc-editor.org/info/rfc3629>.
[RFC3927] Cheshire, S., Aboba, B., and E. Guttman, "Dynamic
Configuration of IPv4 Link-Local Addresses", RFC 3927,
DOI 10.17487/RFC3927, May 2005,
<https://www.rfc-editor.org/info/rfc3927>.
[RFC4034] Arends, R., Austein, R., Larson, M., Massey, D., and S.
Rose, "Resource Records for the DNS Security Extensions",
RFC 4034, DOI 10.17487/RFC4034, March 2005,
<https://www.rfc-editor.org/info/rfc4034>.
[RFC4862] Thomson, S., Narten, T., and T. Jinmei, "IPv6 Stateless
Address Autoconfiguration", RFC 4862,
DOI 10.17487/RFC4862, September 2007,
<https://www.rfc-editor.org/info/rfc4862>.
[RFC5155] Laurie, B., Sisson, G., Arends, R., and D. Blacka, "DNS
Security (DNSSEC) Hashed Authenticated Denial of
Existence", RFC 5155, DOI 10.17487/RFC5155, March 2008,
<https://www.rfc-editor.org/info/rfc5155>.
[RFC5198] Klensin, J. and M. Padlipsky, "Unicode Format for Network
Interchange", RFC 5198, DOI 10.17487/RFC5198, March 2008,
<https://www.rfc-editor.org/info/rfc5198>.
[RFC6762] Cheshire, S. and M. Krochmal, "Multicast DNS", RFC 6762,
DOI 10.17487/RFC6762, February 2013,
<https://www.rfc-editor.org/info/rfc6762>.
[RFC6763] Cheshire, S. and M. Krochmal, "DNS-Based Service
Discovery", RFC 6763, DOI 10.17487/RFC6763, February 2013,
<https://www.rfc-editor.org/info/rfc6763>.
[RFC8174] Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC
2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174,
May 2017, <https://www.rfc-editor.org/info/rfc8174>.
[RFC8490] Bellis, R., Cheshire, S., Dickinson, J., Dickinson, S.,
Lemon, T., and T. Pusateri, "DNS Stateful Operations",
RFC 8490, DOI 10.17487/RFC8490, March 2019,
<https://www.rfc-editor.org/info/rfc8490>.
[RFC8765] Pusateri, T. and S. Cheshire, "DNS Push Notifications",
RFC 8765, DOI 10.17487/RFC8765, June 2020,
<https://www.rfc-editor.org/info/rfc8765>.
11.2. Informative References
[DNS-UL] Cheshire, S. and T. Lemon, "Dynamic DNS Update Leases",
Work in Progress, Internet-Draft, draft-sekar-dns-ul-02, 2
August 2018,
<https://tools.ietf.org/html/draft-sekar-dns-ul-02>.
[IEEE-1Q] IEEE, "IEEE Standard for Local and metropolitan area
networks -- Bridges and Bridged Networks", IEEE Std
802.1Q-2014, DOI 10.1109/IEEESTD.2014.6991462, 2014,
<https://ieeexplore.ieee.org/document/6991462>.
[IEEE-3] IEEE, "IEEE Standard for Ethernet",
DOI 10.1109/IEEESTD.2018.8457469, IEEE Std 802.3-2018,
December 2008,
<https://ieeexplore.ieee.org/document/8457469>.
[IEEE-5] IEEE, "Telecommunications and information exchange between
systems - Local and metropolitan area networks - Part 5:
Token ring access method and physical layer
specifications", IEEE Std 802.5-1998, 1998,
<https://standards.ieee.org/standard/802_5-1998.html>.
[IEEE-11] IEEE, "Information technology - Telecommunications and
information exchange between systems - Local and
metropolitan area networks - Specific requirements - Part
11: Wireless LAN Medium Access Control (MAC) and Physical
Layer (PHY) Specifications", IEEE Std 802.11-2016,
December 2016,
<https://standards.ieee.org/standard/802_11-2016.html>.
[MCAST] Perkins, C., McBride, M., Stanley, D., Kumari, W., and J.
Zuniga, "Multicast Considerations over IEEE 802 Wireless
Media", Work in Progress, Internet-Draft, draft-ietf-
mboned-ieee802-mcast-problems-11, 11 December 2019,
<https://tools.ietf.org/html/draft-ietf-mboned-ieee802-
mcast-problems-11>.
[OHP] "ohybridproxy - an mDNS/DNS hybrid-proxy based on
mDNSResponder", commit 464d6c9, June 2017,
<https://github.com/sbyx/ohybridproxy/>.
[REG-PROT] Cheshire, S. and T. Lemon, "Service Registration Protocol
for DNS-Based Service Discovery", Work in Progress,
Internet-Draft, draft-sctl-service-registration-02, 15
July 2018, <https://tools.ietf.org/html/draft-sctl-
service-registration-02>.
[RELAY] Cheshire, S. and T. Lemon, "Multicast DNS Discovery
Relay", Work in Progress, Internet-Draft, draft-sctl-
dnssd-mdns-relay-04, 21 March 2018,
<https://tools.ietf.org/html/draft-sctl-dnssd-mdns-relay-
04>.
[RFC2132] Alexander, S. and R. Droms, "DHCP Options and BOOTP Vendor
Extensions", RFC 2132, DOI 10.17487/RFC2132, March 1997,
<https://www.rfc-editor.org/info/rfc2132>.
[RFC2136] Vixie, P., Ed., Thomson, S., Rekhter, Y., and J. Bound,
"Dynamic Updates in the Domain Name System (DNS UPDATE)",
RFC 2136, DOI 10.17487/RFC2136, April 1997,
<https://www.rfc-editor.org/info/rfc2136>.
[RFC3007] Wellington, B., "Secure Domain Name System (DNS) Dynamic
Update", RFC 3007, DOI 10.17487/RFC3007, November 2000,
<https://www.rfc-editor.org/info/rfc3007>.
[RFC3492] Costello, A., "Punycode: A Bootstring encoding of Unicode
for Internationalized Domain Names in Applications
(IDNA)", RFC 3492, DOI 10.17487/RFC3492, March 2003,
<https://www.rfc-editor.org/info/rfc3492>.
[RFC4193] Hinden, R. and B. Haberman, "Unique Local IPv6 Unicast
Addresses", RFC 4193, DOI 10.17487/RFC4193, October 2005,
<https://www.rfc-editor.org/info/rfc4193>.
[RFC6760] Cheshire, S. and M. Krochmal, "Requirements for a Protocol
to Replace the AppleTalk Name Binding Protocol (NBP)",
RFC 6760, DOI 10.17487/RFC6760, February 2013,
<https://www.rfc-editor.org/info/rfc6760>.
[RFC7558] Lynn, K., Cheshire, S., Blanchet, M., and D. Migault,
"Requirements for Scalable DNS-Based Service Discovery
(DNS-SD) / Multicast DNS (mDNS) Extensions", RFC 7558,
DOI 10.17487/RFC7558, July 2015,
<https://www.rfc-editor.org/info/rfc7558>.
[RFC7626] Bortzmeyer, S., "DNS Privacy Considerations", RFC 7626,
DOI 10.17487/RFC7626, August 2015,
<https://www.rfc-editor.org/info/rfc7626>.
[RFC7788] Stenberg, M., Barth, S., and P. Pfister, "Home Networking
Control Protocol", RFC 7788, DOI 10.17487/RFC7788, April
2016, <https://www.rfc-editor.org/info/rfc7788>.
[RFC8375] Pfister, P. and T. Lemon, "Special-Use Domain
'home.arpa.'", RFC 8375, DOI 10.17487/RFC8375, May 2018,
<https://www.rfc-editor.org/info/rfc8375>.
[RFC8764] Cheshire, S. and M. Krochmal, "Apple's DNS Long-Lived
Queries Protocol", RFC 8764, DOI 10.17487/RFC8764, June
2020, <https://www.rfc-editor.org/info/rfc8764>.
[ROADMAP] Cheshire, S., "Service Discovery Road Map", Work in
Progress, Internet-Draft, draft-cheshire-dnssd-roadmap-03,
23 October 2018, <https://tools.ietf.org/html/draft-
cheshire-dnssd-roadmap-03>.
[ZC] Cheshire, S. and D.H. Steinberg, "Zero Configuration
Networking: The Definitive Guide", O'Reilly Media, Inc.,
ISBN 0-596-10100-7, December 2005.
Appendix A. Implementation Status
Some aspects of the mechanism specified in this document already exist in deployed software. Some aspects are new. This section outlines which aspects already exist and which are new.
A.1. Already Implemented and Deployed
Domain enumeration by the client ("b._dns-sd._udp.<zone>" queries) is
already implemented and deployed.
Performing unicast queries to the indicated discovery domain is already implemented and deployed.
These are implemented and deployed in Mac OS X 10.4 Tiger and later (including all versions of Apple iOS, on all models of iPhones, iPads, Apple TVs and HomePods), in Bonjour for Windows, and in Android 4.1 "Jelly Bean" (API Level 16) and later.
Domain enumeration and unicast querying have been used for several years at IETF meetings to make terminal room printers discoverable from outside the terminal room. When an IETF attendee presses "Cmd-P" on a Mac, or selects AirPrint on an iPad or iPhone, and the terminal room printers appear, it is because the client is sending Unicast DNS queries to the IETF DNS servers. A walk-through giving the details of this particular specific example is given in Appendix A of the Roadmap document [ROADMAP].
The Long-Lived Query mechanism [RFC8764] referred to in this specification exists and is deployed but was not standardized by the IETF. The IETF has developed a superior Long-Lived Query mechanism called DNS Push Notifications [RFC8765], which is built on DNS Stateful Operations [RFC8490]. DNS Push Notifications is implemented and deployed in Mac OS X 10.15 and later, and iOS 13 and later.
A.2. Already Implemented
A minimal portable Discovery Proxy implementation has been produced by Markus Stenberg and Steven Barth, which runs on OS X and several Linux variants including OpenWrt [OHP]. It was demonstrated at the Berlin IETF in July 2013.
Tom Pusateri has an implementation that runs on any Unix/Linux system. It has a RESTful interface for management and an experimental demo command-line interface (CLI) and web interface.
Ted Lemon also has produced a portable implementation of Discovery Proxy, which is available in the mDNSResponder open source code.
A.3. Partially Implemented
At the time of writing, existing APIs make multiple domains visible to client software, but most client user interfaces lump all discovered services into a single flat list. This is largely a chicken-and-egg problem. Application writers were naturally reluctant to spend time writing domain-aware user interface code when few customers would benefit from it. If Discovery Proxy deployment becomes common, then application writers will have a reason to provide a better user experience. Existing applications will work with the Discovery Proxy but will show all services in a single flat list. Applications with improved user interfaces will show services grouped by domain.
Acknowledgments
Thanks to Markus Stenberg for helping develop the policy regarding the four styles of unicast response according to what data is immediately available in the cache. Thanks to Anders Brandt, Ben Campbell, Tim Chown, Alissa Cooper, Spencer Dawkins, Ralph Droms, Joel Halpern, Ray Hunter, Joel Jaeggli, Warren Kumari, Ted Lemon, Alexey Melnikov, Kathleen Moriarty, Tom Pusateri, Eric Rescorla, Adam Roach, David Schinazi, Markus Stenberg, Dave Thaler, and Andrew Yourtchenko for their comments.
Author's Address
Stuart Cheshire Apple Inc. One Apple Park Way Cupertino, California 95014 United States of America
Phone: +1 (408) 996-1010 Email: cheshire@apple.com
/home/gen.uk/domains/wiki.gen.uk/public_html/data/pages/rfc/rfc8766.txt · Last modified: 2020/06/23 04:22 by 127.0.0.1