rfc:rfc8621
Internet Engineering Task Force (IETF) N. Jenkins Request for Comments: 8621 Fastmail Updates: 5788 C. Newman Category: Standards Track Oracle ISSN: 2070-1721 August 2019
The JSON Meta Application Protocol (JMAP) for Mail
Abstract
This document specifies a data model for synchronising email data with a server using the JSON Meta Application Protocol (JMAP). Clients can use this to efficiently search, access, organise, and send messages, and to get push notifications for fast resynchronisation when new messages are delivered or a change is made in another client.
Status of This Memo
This is an Internet Standards Track document.
This document is a product of the Internet Engineering Task Force (IETF). It represents the consensus of the IETF community. It has received public review and has been approved for publication by the Internet Engineering Steering Group (IESG). Further information on Internet Standards is available in Section 2 of RFC 7841.
Information about the current status of this document, any errata, and how to provide feedback on it may be obtained at https://www.rfc-editor.org/info/rfc8621.
Copyright Notice
Copyright (c) 2019 IETF Trust and the persons identified as the document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License.
Jenkins & Newman Standards Track [Page 1] RFC 8621 JMAP Mail August 2019
Table of Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 4
1.1. Notational Conventions . . . . . . . . . . . . . . . . . 4
1.2. Terminology . . . . . . . . . . . . . . . . . . . . . . . 5
1.3. Additions to the Capabilities Object . . . . . . . . . . 5
1.3.1. urn:ietf:params:jmap:mail . . . . . . . . . . . . . . 5
1.3.2. urn:ietf:params:jmap:submission . . . . . . . . . . . 7
1.3.3. urn:ietf:params:jmap:vacationresponse . . . . . . . . 8
1.4. Data Type Support in Different Accounts . . . . . . . . . 8
1.5. Push . . . . . . . . . . . . . . . . . . . . . . . . . . 8
1.5.1. Example . . . . . . . . . . . . . . . . . . . . . . . 9
1.6. Ids . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
2. Mailboxes . . . . . . . . . . . . . . . . . . . . . . . . . . 9
2.1. Mailbox/get . . . . . . . . . . . . . . . . . . . . . . . 14
2.2. Mailbox/changes . . . . . . . . . . . . . . . . . . . . . 14
2.3. Mailbox/query . . . . . . . . . . . . . . . . . . . . . . 14
2.4. Mailbox/queryChanges . . . . . . . . . . . . . . . . . . 15
2.5. Mailbox/set . . . . . . . . . . . . . . . . . . . . . . . 16
2.6. Example . . . . . . . . . . . . . . . . . . . . . . . . . 17
3. Threads . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
3.1. Thread/get . . . . . . . . . . . . . . . . . . . . . . . 22
3.1.1. Example . . . . . . . . . . . . . . . . . . . . . . . 22
3.2. Thread/changes . . . . . . . . . . . . . . . . . . . . . 22
4. Emails . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
4.1. Properties of the Email Object . . . . . . . . . . . . . 23
4.1.1. Metadata . . . . . . . . . . . . . . . . . . . . . . 24
4.1.2. Header Fields Parsed Forms . . . . . . . . . . . . . 26
4.1.3. Header Fields Properties . . . . . . . . . . . . . . 32
4.1.4. Body Parts . . . . . . . . . . . . . . . . . . . . . 35
4.2. Email/get . . . . . . . . . . . . . . . . . . . . . . . . 42
4.2.1. Example . . . . . . . . . . . . . . . . . . . . . . . 44
4.3. Email/changes . . . . . . . . . . . . . . . . . . . . . . 45
4.4. Email/query . . . . . . . . . . . . . . . . . . . . . . . 45
4.4.1. Filtering . . . . . . . . . . . . . . . . . . . . . . 46
4.4.2. Sorting . . . . . . . . . . . . . . . . . . . . . . . 49
4.4.3. Thread Collapsing . . . . . . . . . . . . . . . . . . 50
4.5. Email/queryChanges . . . . . . . . . . . . . . . . . . . 51
4.6. Email/set . . . . . . . . . . . . . . . . . . . . . . . . 51
4.7. Email/copy . . . . . . . . . . . . . . . . . . . . . . . 53
4.8. Email/import . . . . . . . . . . . . . . . . . . . . . . 54
4.9. Email/parse . . . . . . . . . . . . . . . . . . . . . . . 56
4.10. Examples . . . . . . . . . . . . . . . . . . . . . . . . 58
5. Search Snippets . . . . . . . . . . . . . . . . . . . . . . . 68
5.1. SearchSnippet/get . . . . . . . . . . . . . . . . . . . . 69
5.2. Example . . . . . . . . . . . . . . . . . . . . . . . . . 71
Jenkins & Newman Standards Track [Page 2] RFC 8621 JMAP Mail August 2019
6. Identities . . . . . . . . . . . . . . . . . . . . . . . . . 72
6.1. Identity/get . . . . . . . . . . . . . . . . . . . . . . 73
6.2. Identity/changes . . . . . . . . . . . . . . . . . . . . 73
6.3. Identity/set . . . . . . . . . . . . . . . . . . . . . . 73
6.4. Example . . . . . . . . . . . . . . . . . . . . . . . . . 73
7. Email Submission . . . . . . . . . . . . . . . . . . . . . . 74
7.1. EmailSubmission/get . . . . . . . . . . . . . . . . . . . 80
7.2. EmailSubmission/changes . . . . . . . . . . . . . . . . . 80
7.3. EmailSubmission/query . . . . . . . . . . . . . . . . . . 80
7.4. EmailSubmission/queryChanges . . . . . . . . . . . . . . 81
7.5. EmailSubmission/set . . . . . . . . . . . . . . . . . . . 81
7.5.1. Example . . . . . . . . . . . . . . . . . . . . . . . 84
8. Vacation Response . . . . . . . . . . . . . . . . . . . . . . 86
8.1. VacationResponse/get . . . . . . . . . . . . . . . . . . 87
8.2. VacationResponse/set . . . . . . . . . . . . . . . . . . 88
9. Security Considerations . . . . . . . . . . . . . . . . . . . 88
9.1. EmailBodyPart Value . . . . . . . . . . . . . . . . . . . 88
9.2. HTML Email Display . . . . . . . . . . . . . . . . . . . 88
9.3. Multiple Part Display . . . . . . . . . . . . . . . . . . 91
9.4. Email Submission . . . . . . . . . . . . . . . . . . . . 91
9.5. Partial Account Access . . . . . . . . . . . . . . . . . 92
9.6. Permission to Send from an Address . . . . . . . . . . . 92
10. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 93
10.1. JMAP Capability Registration for "mail" . . . . . . . . 93
10.2. JMAP Capability Registration for "submission" . . . . . 93
10.3. JMAP Capability Registration for "vacationresponse" . . 94
10.4. IMAP and JMAP Keywords Registry . . . . . . . . . . . . 94
10.4.1. Registration of JMAP Keyword "$draft" . . . . . . . 95
10.4.2. Registration of JMAP Keyword "$seen" . . . . . . . . 96
10.4.3. Registration of JMAP Keyword "$flagged" . . . . . . 97
10.4.4. Registration of JMAP Keyword "$answered" . . . . . . 98
10.4.5. Registration of "$recent" Keyword . . . . . . . . . 99
10.5. IMAP Mailbox Name Attributes Registry . . . . . . . . . 99
10.5.1. Registration of "inbox" Role . . . . . . . . . . . . 99
10.6. JMAP Error Codes Registry . . . . . . . . . . . . . . . 100
10.6.1. mailboxHasChild . . . . . . . . . . . . . . . . . . 100
10.6.2. mailboxHasEmail . . . . . . . . . . . . . . . . . . 100
10.6.3. blobNotFound . . . . . . . . . . . . . . . . . . . . 100
10.6.4. tooManyKeywords . . . . . . . . . . . . . . . . . . 101
10.6.5. tooManyMailboxes . . . . . . . . . . . . . . . . . . 101
10.6.6. invalidEmail . . . . . . . . . . . . . . . . . . . . 101
10.6.7. tooManyRecipients . . . . . . . . . . . . . . . . . 102
10.6.8. noRecipients . . . . . . . . . . . . . . . . . . . . 102
10.6.9. invalidRecipients . . . . . . . . . . . . . . . . . 102
10.6.10. forbiddenMailFrom . . . . . . . . . . . . . . . . . 103
10.6.11. forbiddenFrom . . . . . . . . . . . . . . . . . . . 103
10.6.12. forbiddenToSend . . . . . . . . . . . . . . . . . . 103
Jenkins & Newman Standards Track [Page 3] RFC 8621 JMAP Mail August 2019
11. References . . . . . . . . . . . . . . . . . . . . . . . . . 104 11.1. Normative References . . . . . . . . . . . . . . . . . . 104 11.2. Informative References . . . . . . . . . . . . . . . . . 107 Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . 108
1. Introduction
The JSON Meta Application Protocol (JMAP) [RFC8620] is a generic protocol for synchronising data, such as mail, calendars, or contacts between a client and a server. It is optimised for mobile and web environments and aims to provide a consistent interface to different data types.
This specification defines a data model for accessing a mail store over JMAP, allowing you to query, read, organise, and submit mail for sending.
The data model is designed to allow a server to provide consistent access to the same data via IMAP [RFC3501] as well as JMAP. As in IMAP, a message must belong to a mailbox; however, in JMAP, its id does not change if you move it between mailboxes, and the server may allow it to belong to multiple mailboxes simultaneously (often exposed in a user agent as labels rather than folders).
As in IMAP, messages may also be assigned zero or more keywords: short arbitrary strings. These are primarily intended to store metadata to inform client display, such as unread status or whether a message has been replied to. An IANA registry allows common semantics to be shared between clients and extended easily in the future.
A message and its replies are linked on the server by a common Thread id. Clients may fetch the list of messages with a particular Thread id to more easily present a threaded or conversational interface.
Permissions for message access happen on a per-mailbox basis. Servers may give the user restricted permissions for certain mailboxes, for example, if another user's inbox has been shared as read-only with them.
1.1. Notational Conventions
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here.
Jenkins & Newman Standards Track [Page 4] RFC 8621 JMAP Mail August 2019
Type signatures, examples, and property descriptions in this document follow the conventions established in Section 1.1 of [RFC8620]. Data types defined in the core specification are also used in this document.
Servers MUST support all properties specified for the new data types defined in this document.
1.2. Terminology
This document uses the same terminology as in the core JMAP specification.
The terms Mailbox, Thread, Email, SearchSnippet, EmailSubmission and VacationResponse (with that specific capitalisation) are used to refer to the data types defined in this document and instances of those data types.
The term message refers to a document in Internet Message Format, as described in [RFC5322]. The Email data type represents messages in the mail store and associated metadata.
1.3. Additions to the Capabilities Object
The capabilities object is returned as part of the JMAP Session object; see [RFC8620], Section 2.
This document defines three additional capability URIs.
1.3.1. urn:ietf:params:jmap:mail
This represents support for the Mailbox, Thread, Email, and SearchSnippet data types and associated API methods. The value of this property in the JMAP session "capabilities" property is an empty object.
The value of this property in an account's "accountCapabilities" property is an object that MUST contain the following information on server capabilities and permissions for that account:
o maxMailboxesPerEmail: "UnsignedInt|null"
The maximum number of Mailboxes (see Section 2) that can be can
assigned to a single Email object (see Section 4). This MUST be
an integer >= 1, or null for no limit (or rather, the limit is
always the number of Mailboxes in the account).
Jenkins & Newman Standards Track [Page 5] RFC 8621 JMAP Mail August 2019
o maxMailboxDepth: "UnsignedInt|null"
The maximum depth of the Mailbox hierarchy (i.e., one more than
the maximum number of ancestors a Mailbox may have), or null for
no limit.
o maxSizeMailboxName: "UnsignedInt"
The maximum length, in (UTF-8) octets, allowed for the name of a
Mailbox. This MUST be at least 100, although it is recommended
servers allow more.
o maxSizeAttachmentsPerEmail: "UnsignedInt"
The maximum total size of attachments, in octets, allowed for a
single Email object. A server MAY still reject the import or
creation of an Email with a lower attachment size total (for
example, if the body includes several megabytes of text, causing
the size of the encoded MIME structure to be over some server-
defined limit).
Note that this limit is for the sum of unencoded attachment sizes.
Users are generally not knowledgeable about encoding overhead,
etc., nor should they need to be, so marketing and help materials
normally tell them the "max size attachments". This is the
unencoded size they see on their hard drive, so this capability
matches that and allows the client to consistently enforce what
the user understands as the limit.
The server may separately have a limit for the total size of the
message [RFC5322], created by combining the attachments (often
base64 encoded) with the message headers and bodies. For example,
suppose the server advertises "maxSizeAttachmentsPerEmail:
50000000" (50 MB). The enforced server limit may be for a message
size of 70000000 octets. Even with base64 encoding and a 2 MB
HTML body, 50 MB attachments would fit under this limit.
o emailQuerySortOptions: "String[]"
A list of all the values the server supports for the "property"
field of the Comparator object in an "Email/query" sort (see
Section 4.4.2). This MAY include properties the client does not
recognise (for example, custom properties specified in a vendor
extension). Clients MUST ignore any unknown properties in the
list.
Jenkins & Newman Standards Track [Page 6] RFC 8621 JMAP Mail August 2019
o mayCreateTopLevelMailbox: "Boolean"
If true, the user may create a Mailbox (see Section 2) in this
account with a null parentId. (Permission for creating a child of
an existing Mailbox is given by the "myRights" property on that
Mailbox.)
1.3.2. urn:ietf:params:jmap:submission
This represents support for the Identity and EmailSubmission data types and associated API methods. The value of this property in the JMAP session "capabilities" property is an empty object.
The value of this property in an account's "accountCapabilities" property is an object that MUST contain the following information on server capabilities and permissions for that account:
o maxDelayedSend: "UnsignedInt"
The number in seconds of the maximum delay the server supports in
sending (see the EmailSubmission object description). This is 0
if the server does not support delayed send.
o submissionExtensions: "String[String[]]"
The set of SMTP submission extensions supported by the server,
which the client may use when creating an EmailSubmission object
(see Section 7). Each key in the object is the "ehlo-name", and
the value is a list of "ehlo-args".
A JMAP implementation that talks to a submission server [RFC6409]
SHOULD have a configuration setting that allows an administrator
to modify the set of submission EHLO capabilities it may expose on
this property. This allows a JMAP server to easily add access to
a new submission extension without code changes. By default, the
JMAP server should hide EHLO capabilities that have to do with the
transport mechanism and thus are only relevant to the JMAP server
(for example, PIPELINING, CHUNKING, or STARTTLS).
Examples of Submission extensions to include:
- FUTURERELEASE [RFC4865]
- SIZE [RFC1870]
- DSN [RFC3461]
- DELIVERYBY [RFC2852]
Jenkins & Newman Standards Track [Page 7] RFC 8621 JMAP Mail August 2019
- MT-PRIORITY [RFC6710]
A JMAP server MAY advertise an extension and implement the
semantics of that extension locally on the JMAP server even if a
submission server used by JMAP doesn't implement it.
The full IANA registry of submission extensions can be found at
<https://www.iana.org/assignments/mail-parameters>.
1.3.3. urn:ietf:params:jmap:vacationresponse
This represents support for the VacationResponse data type and associated API methods. The value of this property is an empty object in both the JMAP session "capabilities" property and an account's "accountCapabilities" property.
1.4. Data Type Support in Different Accounts
The server MUST include the appropriate capability strings as keys in the "accountCapabilities" property of any account with which the user may use the data types represented by that URI. Supported data types may differ between accounts the user has access to. For example, in the user's personal account, they may have access to all three sets of data, but in a shared account, they may only have data for "urn:ietf:params:jmap:mail". This means they can access Mailbox/Thread/Email data in the shared account but are not allowed to send as that account (and so do not have access to Identity/ EmailSubmission objects) or view/set its VacationResponse.
1.5. Push
Servers MUST support the JMAP push mechanisms, as specified in [RFC8620], Section 7, to receive notifications when the state changes for any of the types defined in this specification.
In addition, servers that implement the "urn:ietf:params:jmap:mail" capability MUST support pushing state changes for a type called "EmailDelivery". There are no methods to act on this type; it only exists as part of the push mechanism. The state string for this MUST change whenever a new Email is added to the store, but it SHOULD NOT change upon any other change to the Email objects, for example, if one is marked as read or deleted.
Clients in battery-constrained environments may wish to delay fetching changes initiated by the user but fetch new Emails immediately so they can notify the user. To do this, they can register for pushes for the EmailDelivery type rather than the Email type (as defined in Section 4).
Jenkins & Newman Standards Track [Page 8] RFC 8621 JMAP Mail August 2019
1.5.1. Example
The client has registered for push notifications (see [RFC8620]) just for the EmailDelivery type. The user marks an Email as read on another device, causing the state string for the Email type to change; however, as nothing new was added to the store, the EmailDelivery state does not change and nothing is pushed to the client. A new message arrives in the user's inbox, again causing the Email state to change. This time, the EmailDelivery state also changes, and a StateChange object is pushed to the client with the new state string. The client may then resync to fetch the new Email immediately.
1.6. Ids
If a JMAP Mail server also provides an IMAP interface to the data and supports IMAP Extension for Object Identifiers [RFC8474], the ids SHOULD be the same for Mailbox, Thread, and Email objects in JMAP.
2. Mailboxes
A Mailbox represents a named set of Email objects. This is the primary mechanism for organising messages within an account. It is analogous to a folder or a label in other systems. A Mailbox may perform a certain role in the system; see below for more details.
For compatibility with IMAP, an Email MUST belong to one or more Mailboxes. The Email id does not change if the Email changes Mailboxes.
A *Mailbox* object has the following properties:
o id: "Id" (immutable; server-set)
The id of the Mailbox.
o name: "String"
User-visible name for the Mailbox, e.g., "Inbox". This MUST be a
Net-Unicode string [RFC5198] of at least 1 character in length,
subject to the maximum size given in the capability object. There
MUST NOT be two sibling Mailboxes with both the same parent and
the same name. Servers MAY reject names that violate server
policy (e.g., names containing a slash (/) or control characters).
Jenkins & Newman Standards Track [Page 9] RFC 8621 JMAP Mail August 2019
o parentId: "Id|null" (default: null)
The Mailbox id for the parent of this Mailbox, or null if this
Mailbox is at the top level. Mailboxes form acyclic graphs
(forests) directed by the child-to-parent relationship. There
MUST NOT be a loop.
o role: "String|null" (default: null)
Identifies Mailboxes that have a particular common purpose (e.g.,
the "inbox"), regardless of the "name" property (which may be
localised).
This value is shared with IMAP (exposed in IMAP via the SPECIAL-
USE extension [RFC6154]). However, unlike in IMAP, a Mailbox MUST
only have a single role, and there MUST NOT be two Mailboxes in
the same account with the same role. Servers providing IMAP
access to the same data are encouraged to enforce these extra
restrictions in IMAP as well. Otherwise, modifying the IMAP
attributes to ensure compliance when exposing the data over JMAP
is implementation dependent.
The value MUST be one of the Mailbox attribute names listed in the
IANA "IMAP Mailbox Name Attributes" registry at
<https://www.iana.org/assignments/imap-mailbox-name-attributes/>,
as established in [RFC8457], converted to lowercase. New roles
may be established here in the future.
An account is not required to have Mailboxes with any particular
roles.
o sortOrder: "UnsignedInt" (default: 0)
Defines the sort order of Mailboxes when presented in the client's
UI, so it is consistent between devices. The number MUST be an
integer in the range 0 <= sortOrder < 2^31.
A Mailbox with a lower order should be displayed before a Mailbox
with a higher order (that has the same parent) in any Mailbox
listing in the client's UI. Mailboxes with equal order SHOULD be
sorted in alphabetical order by name. The sorting should take
into account locale-specific character order convention.
o totalEmails: "UnsignedInt" (server-set)
The number of Emails in this Mailbox.
Jenkins & Newman Standards Track [Page 10] RFC 8621 JMAP Mail August 2019
o unreadEmails: "UnsignedInt" (server-set)
The number of Emails in this Mailbox that have neither the "$seen"
keyword nor the "$draft" keyword.
o totalThreads: "UnsignedInt" (server-set)
The number of Threads where at least one Email in the Thread is in
this Mailbox.
o unreadThreads: "UnsignedInt" (server-set)
An indication of the number of "unread" Threads in the Mailbox.
For compatibility with existing implementations, the way "unread
Threads" is determined is not mandated in this document. The
simplest solution to implement is simply the number of Threads
where at least one Email in the Thread is both in this Mailbox and
has neither the "$seen" nor "$draft" keywords.
However, a quality implementation will return the number of unread
items the user would see if they opened that Mailbox. A Thread is
shown as unread if it contains any unread Emails that will be
displayed when the Thread is opened. Therefore, "unreadThreads"
should be the number of Threads where at least one Email in the
Thread has neither the "$seen" nor the "$draft" keyword AND at
least one Email in the Thread is in this Mailbox. Note that the
unread Email does not need to be the one in this Mailbox. In
addition, the trash Mailbox (that is, a Mailbox whose "role" is
"trash") requires special treatment:
1. Emails that are *only* in the trash (and no other Mailbox) are
ignored when calculating the "unreadThreads" count of other
Mailboxes.
2. Emails that are *not* in the trash are ignored when
calculating the "unreadThreads" count for the trash Mailbox.
The result of this is that Emails in the trash are treated as
though they are in a separate Thread for the purposes of unread
counts. It is expected that clients will hide Emails in the trash
when viewing a Thread in another Mailbox, and vice versa. This
allows you to delete a single Email to the trash out of a Thread.
For example, suppose you have an account where the entire contents
is a single Thread with 2 Emails: an unread Email in the trash and
a read Email in the inbox. The "unreadThreads" count would be 1
for the trash and 0 for the inbox.
Jenkins & Newman Standards Track [Page 11] RFC 8621 JMAP Mail August 2019
o myRights: "MailboxRights" (server-set)
The set of rights (Access Control Lists (ACLs)) the user has in
relation to this Mailbox. These are backwards compatible with
IMAP ACLs, as defined in [RFC4314]. A *MailboxRights* object has
the following properties:
- mayReadItems: "Boolean"
If true, the user may use this Mailbox as part of a filter in
an "Email/query" call, and the Mailbox may be included in the
"mailboxIds" property of Email objects. Email objects may be
fetched if they are in *at least one* Mailbox with this
permission. If a sub-Mailbox is shared but not the parent
Mailbox, this may be false. Corresponds to IMAP ACLs "lr" (if
mapping from IMAP, both are required for this to be true).
- mayAddItems: "Boolean"
The user may add mail to this Mailbox (by either creating a new
Email or moving an existing one). Corresponds to IMAP ACL "i".
- mayRemoveItems: "Boolean"
The user may remove mail from this Mailbox (by either changing
the Mailboxes of an Email or destroying the Email).
Corresponds to IMAP ACLs "te" (if mapping from IMAP, both are
required for this to be true).
- maySetSeen: "Boolean"
The user may add or remove the "$seen" keyword to/from an
Email. If an Email belongs to multiple Mailboxes, the user may
only modify "$seen" if they have this permission for *all* of
the Mailboxes. Corresponds to IMAP ACL "s".
- maySetKeywords: "Boolean"
The user may add or remove any keyword other than "$seen" to/
from an Email. If an Email belongs to multiple Mailboxes, the
user may only modify keywords if they have this permission for
*all* of the Mailboxes. Corresponds to IMAP ACL "w".
- mayCreateChild: "Boolean"
The user may create a Mailbox with this Mailbox as its parent.
Corresponds to IMAP ACL "k".
Jenkins & Newman Standards Track [Page 12] RFC 8621 JMAP Mail August 2019
- mayRename: "Boolean"
The user may rename the Mailbox or make it a child of another
Mailbox. Corresponds to IMAP ACL "x" (although this covers
both rename and delete permissions).
- mayDelete: "Boolean"
The user may delete the Mailbox itself. Corresponds to IMAP
ACL "x" (although this covers both rename and delete
permissions).
- maySubmit: "Boolean"
Messages may be submitted directly to this Mailbox.
Corresponds to IMAP ACL "p".
o isSubscribed: "Boolean"
Has the user indicated they wish to see this Mailbox in their
client? This SHOULD default to false for Mailboxes in shared
accounts the user has access to and true for any new Mailboxes
created by the user themself. This MUST be stored separately per
user where multiple users have access to a shared Mailbox.
A user may have permission to access a large number of shared
accounts, or a shared account with a very large set of Mailboxes,
but only be interested in the contents of a few of these. Clients
may choose to only display Mailboxes where the "isSubscribed"
property is set to true, and offer a separate UI to allow the user
to see and subscribe/unsubscribe from the full set of Mailboxes.
However, clients MAY choose to ignore this property, either
entirely for ease of implementation or just for an account where
"isPersonal" is true (indicating it is the user's own rather than
a shared account).
This property corresponds to IMAP [RFC3501] mailbox subscriptions.
For IMAP compatibility, an Email in both the trash and another Mailbox SHOULD be treated by the client as existing in both places (i.e., when emptying the trash, the client should just remove it from the trash Mailbox and leave it in the other Mailbox).
The following JMAP methods are supported.
Jenkins & Newman Standards Track [Page 13] RFC 8621 JMAP Mail August 2019
2.1. Mailbox/get
This is a standard "/get" method as described in [RFC8620], Section 5.1. The "ids" argument may be "null" to fetch all at once.
2.2. Mailbox/changes
This is a standard "/changes" method as described in [RFC8620], Section 5.2 but with one extra argument to the response:
o updatedProperties: "String[]|null"
If only the "totalEmails", "unreadEmails", "totalThreads", and/or
"unreadThreads" Mailbox properties have changed since the old
state, this will be the list of properties that may have changed.
If the server is unable to tell if only counts have changed, it
MUST just be null.
Since counts frequently change but other properties are generally only changed rarely, the server can help the client optimise data transfer by keeping track of changes to Email/Thread counts separate from other state changes. The "updatedProperties" array may be used directly via a back-reference in a subsequent "Mailbox/get" call in the same request, so only these properties are returned if nothing else has changed.
2.3. Mailbox/query
This is a standard "/query" method as described in [RFC8620], Section 5.5 but with the following additional request argument:
o sortAsTree: "Boolean" (default: false)
If true, when sorting the query results and comparing Mailboxes A
and B:
- If A is an ancestor of B, it always comes first regardless of
the sort comparators. Similarly, if A is descendant of B, then
B always comes first.
- Otherwise, if A and B do not share a "parentId", find the
nearest ancestors of each that do have the same "parentId" and
compare the sort properties on those Mailboxes instead.
The result of this is that the Mailboxes are sorted as a tree
according to the parentId properties, with each set of children
with a common parent sorted according to the standard sort
comparators.
Jenkins & Newman Standards Track [Page 14] RFC 8621 JMAP Mail August 2019
o filterAsTree: "Boolean" (default: false)
If true, a Mailbox is only included in the query if all its
ancestors are also included in the query according to the filter.
A *FilterCondition* object has the following properties, any of which may be omitted:
o parentId: "Id|null"
The Mailbox "parentId" property must match the given value
exactly.
o name: "String"
The Mailbox "name" property contains the given string.
o role: "String|null"
The Mailbox "role" property must match the given value exactly.
o hasAnyRole: "Boolean"
If true, a Mailbox matches if it has any non-null value for its
"role" property.
o isSubscribed: "Boolean"
The "isSubscribed" property of the Mailbox must be identical to
the value given to match the condition.
A Mailbox object matches the FilterCondition if and only if all of the given conditions match. If zero properties are specified, it is automatically true for all objects.
The following Mailbox properties MUST be supported for sorting:
o "sortOrder"
o "name"
2.4. Mailbox/queryChanges
This is a standard "/queryChanges" method as described in [RFC8620], Section 5.6.
Jenkins & Newman Standards Track [Page 15] RFC 8621 JMAP Mail August 2019
2.5. Mailbox/set
This is a standard "/set" method as described in [RFC8620], Section 5.3 but with the following additional request argument:
o onDestroyRemoveEmails: "Boolean" (default: false)
If false, any attempt to destroy a Mailbox that still has Emails
in it will be rejected with a "mailboxHasEmail" SetError. If
true, any Emails that were in the Mailbox will be removed from it,
and if in no other Mailboxes, they will be destroyed when the
Mailbox is destroyed.
The following extra SetError types are defined:
For "destroy":
o "mailboxHasChild": The Mailbox still has at least one child
Mailbox. The client MUST remove these before it can delete the
parent Mailbox.
o "mailboxHasEmail": The Mailbox has at least one Email assigned to
it, and the "onDestroyRemoveEmails" argument was false.
Jenkins & Newman Standards Track [Page 16] RFC 8621 JMAP Mail August 2019
2.6. Example
Fetching all Mailboxes in an account:
[[ "Mailbox/get", {
"accountId": "u33084183",
"ids": null
}, "0" ]]
And the response:
[[ "Mailbox/get", {
"accountId": "u33084183",
"state": "78540",
"list": [{
"id": "MB23cfa8094c0f41e6",
"name": "Inbox",
"parentId": null,
"role": "inbox",
"sortOrder": 10,
"totalEmails": 16307,
"unreadEmails": 13905,
"totalThreads": 5833,
"unreadThreads": 5128,
"myRights": {
"mayAddItems": true,
"mayRename": false,
"maySubmit": true,
"mayDelete": false,
"maySetKeywords": true,
"mayRemoveItems": true,
"mayCreateChild": true,
"maySetSeen": true,
"mayReadItems": true
},
"isSubscribed": true
}, {
"id": "MB674cc24095db49ce",
"name": "Important mail",
...
}, ... ],
"notFound": []
}, "0" ]]
Jenkins & Newman Standards Track [Page 17] RFC 8621 JMAP Mail August 2019
Now suppose an Email is marked read, and we get a push update that the Mailbox state has changed. You might fetch the updates like this:
[[ "Mailbox/changes", {
"accountId": "u33084183",
"sinceState": "78540"
}, "0" ],
[ "Mailbox/get", {
"accountId": "u33084183",
"#ids": {
"resultOf": "0",
"name": "Mailbox/changes",
"path": "/created"
}
}, "1" ],
[ "Mailbox/get", {
"accountId": "u33084183",
"#ids": {
"resultOf": "0",
"name": "Mailbox/changes",
"path": "/updated"
},
"#properties": {
"resultOf": "0",
"name": "Mailbox/changes",
"path": "/updatedProperties"
}
}, "2" ]]
Jenkins & Newman Standards Track [Page 18] RFC 8621 JMAP Mail August 2019
This fetches the list of ids for created/updated/destroyed Mailboxes, then using back-references, it fetches the data for just the created/ updated Mailboxes in the same request. The response may look something like this:
[[ "Mailbox/changes", {
"accountId": "u33084183",
"oldState": "78541",
"newState": "78542",
"hasMoreChanges": false,
"updatedProperties": [
"totalEmails", "unreadEmails",
"totalThreads", "unreadThreads"
],
"created": [],
"updated": ["MB23cfa8094c0f41e6"],
"destroyed": []
}, "0" ],
[ "Mailbox/get", {
"accountId": "u33084183",
"state": "78542",
"list": [],
"notFound": []
}, "1" ],
[ "Mailbox/get", {
"accountId": "u33084183",
"state": "78542",
"list": [{
"id": "MB23cfa8094c0f41e6",
"totalEmails": 16307,
"unreadEmails": 13903,
"totalThreads": 5833,
"unreadThreads": 5127
}],
"notFound": []
}, "2" ]]
Jenkins & Newman Standards Track [Page 19] RFC 8621 JMAP Mail August 2019
Here's an example where we try to rename one Mailbox and destroy another:
[[ "Mailbox/set", {
"accountId": "u33084183",
"ifInState": "78542",
"update": {
"MB674cc24095db49ce": {
"name": "Maybe important mail"
}
},
"destroy": [ "MB23cfa8094c0f41e6" ]
}, "0" ]]
Suppose the rename succeeds, but we don't have permission to destroy the Mailbox we tried to destroy; we might get back:
[[ "Mailbox/set", {
"accountId": "u33084183",
"oldState": "78542",
"newState": "78549",
"updated": {
"MB674cc24095db49ce": null
},
"notDestroyed": {
"MB23cfa8094c0f41e6": {
"type": "forbidden"
}
}
}, "0" ]]
3. Threads
Replies are grouped together with the original message to form a Thread. In JMAP, a Thread is simply a flat list of Emails, ordered by date. Every Email MUST belong to a Thread, even if it is the only Email in the Thread.
The exact algorithm for determining whether two Emails belong to the same Thread is not mandated in this spec to allow for compatibility with different existing systems. For new implementations, it is suggested that two messages belong in the same Thread if both of the following conditions apply:
1. An identical message id [RFC5322] appears in both messages in any
of the Message-Id, In-Reply-To, and References header fields.
Jenkins & Newman Standards Track [Page 20] RFC 8621 JMAP Mail August 2019
2. After stripping automatically added prefixes such as "Fwd:",
"Re:", "[List-Tag]", etc., and ignoring white space, the subjects
are the same. This avoids the situation where a person replies
to an old message as a convenient way of finding the right
recipient to send to but changes the subject and starts a new
conversation.
If messages are delivered out of order for some reason, a user may have two Emails in the same Thread but without headers that associate them with each other. The arrival of a third Email may provide the missing references to join them all together into a single Thread. Since the "threadId" of an Email is immutable, if the server wishes to merge the Threads, it MUST handle this by deleting and reinserting (with a new Email id) the Emails that change "threadId".
A *Thread* object has the following properties:
o id: "Id" (immutable; server-set)
The id of the Thread.
o emailIds: "Id[]" (server-set)
The ids of the Emails in the Thread, sorted by the "receivedAt"
date of the Email, oldest first. If two Emails have an identical
date, the sort is server dependent but MUST be stable (sorting by
id is recommended).
The following JMAP methods are supported.
Jenkins & Newman Standards Track [Page 21] RFC 8621 JMAP Mail August 2019
3.1. Thread/get
This is a standard "/get" method as described in [RFC8620], Section 5.1.
3.1.1. Example
Request:
[[ "Thread/get", {
"accountId": "acme",
"ids": ["f123u4", "f41u44"]
}, "#1" ]]
with response:
[[ "Thread/get", {
"accountId": "acme",
"state": "f6a7e214",
"list": [
{
"id": "f123u4",
"emailIds": [ "eaa623", "f782cbb"]
},
{
"id": "f41u44",
"emailIds": [ "82cf7bb" ]
}
],
"notFound": []
}, "#1" ]]
3.2. Thread/changes
This is a standard "/changes" method as described in [RFC8620], Section 5.2.
4. Emails
An *Email* object is a representation of a message [RFC5322], which allows clients to avoid the complexities of MIME parsing, transfer encoding, and character encoding.
Jenkins & Newman Standards Track [Page 22] RFC 8621 JMAP Mail August 2019
4.1. Properties of the Email Object
Broadly, a message consists of two parts: a list of header fields and then a body. The Email data type provides a way to access the full structure or to use simplified properties and avoid some complexity if this is sufficient for the client application.
While raw headers can be fetched and set, the vast majority of clients should use an appropriate parsed form for each of the header fields it wants to process, as this allows it to avoid the complexities of various encodings that are required in a valid message per RFC 5322.
The body of a message is normally a MIME-encoded set of documents in a tree structure. This may be arbitrarily nested, but the majority of email clients present a flat model of a message body (normally plaintext or HTML) with a set of attachments. Flattening the MIME structure to form this model can be difficult and causes inconsistency between clients. Therefore, in addition to the "bodyStructure" property, which gives the full tree, the Email object contains 3 alternate properties with flat lists of body parts:
o "textBody"/"htmlBody": These provide a list of parts that should
be rendered sequentially as the "body" of the message. This is a
list rather than a single part as messages may have headers and/or
footers appended/prepended as separate parts when they are
transmitted, and some clients send text and images intended to be
displayed inline in the body (or even videos and sound clips) as
multiple parts rather than a single HTML part with referenced
images.
Because MIME allows for multiple representations of the same data
(using "multipart/alternative"), there is a "textBody" property
(which prefers a plaintext representation) and an "htmlBody"
property (which prefers an HTML representation) to accommodate the
two most common client requirements. The same part may appear in
both lists where there is no alternative between the two.
o "attachments": This provides a list of parts that should be
presented as "attachments" to the message. Some images may be
solely there for embedding within an HTML body part; clients may
wish to not present these as attachments in the user interface if
they are displaying the HTML with the embedded images directly.
Some parts may also be in htmlBody/textBody; again, clients may
wish to not present these as attachments in the user interface if
rendered as part of the body.
Jenkins & Newman Standards Track [Page 23] RFC 8621 JMAP Mail August 2019
The "bodyValues" property allows for clients to fetch the value of text parts directly without having to do a second request for the blob and to have the server handle decoding the charset into unicode. This data is in a separate property rather than on the EmailBodyPart object to avoid duplication of large amounts of data, as the same part may be included twice if the client fetches more than one of bodyStructure, textBody, and htmlBody.
In the following subsections, the common notational convention for wildcards has been adopted for content types, so "foo/*" means any content type that starts with "foo/".
Due to the number of properties involved, the set of Email properties is specified over the following four subsections. This is purely for readability; all properties are top-level peers.
4.1.1. Metadata
These properties represent metadata about the message in the mail store and are not derived from parsing the message itself.
o id: "Id" (immutable; server-set)
The id of the Email object. Note that this is the JMAP object id,
NOT the Message-ID header field value of the message [RFC5322].
o blobId: "Id" (immutable; server-set)
The id representing the raw octets of the message [RFC5322] for
this Email. This may be used to download the raw original message
or to attach it directly to another Email, etc.
o threadId: "Id" (immutable; server-set)
The id of the Thread to which this Email belongs.
o mailboxIds: "Id[Boolean]"
The set of Mailbox ids this Email belongs to. An Email in the
mail store MUST belong to one or more Mailboxes at all times
(until it is destroyed). The set is represented as an object,
with each key being a Mailbox id. The value for each key in the
object MUST be true.
Jenkins & Newman Standards Track [Page 24] RFC 8621 JMAP Mail August 2019
o keywords: "String[Boolean]" (default: {})
A set of keywords that apply to the Email. The set is represented
as an object, with the keys being the keywords. The value for
each key in the object MUST be true.
Keywords are shared with IMAP. The six system keywords from IMAP
get special treatment. The following four keywords have their
first character changed from "\" in IMAP to "$" in JMAP and have
particular semantic meaning:
- "$draft": The Email is a draft the user is composing.
- "$seen": The Email has been read.
- "$flagged": The Email has been flagged for urgent/special
attention.
- "$answered": The Email has been replied to.
The IMAP "\Recent" keyword is not exposed via JMAP. The IMAP
"\Deleted" keyword is also not present: IMAP uses a delete+expunge
model, which JMAP does not. Any message with the "\Deleted"
keyword MUST NOT be visible via JMAP (and so are not counted in
the "totalEmails", "unreadEmails", "totalThreads", and
"unreadThreads" Mailbox properties).
Users may add arbitrary keywords to an Email. For compatibility
with IMAP, a keyword is a case-insensitive string of 1-255
characters in the ASCII subset %x21-%x7e (excludes control chars
and space), and it MUST NOT include any of these characters:
( ) { ] % * " \
Because JSON is case sensitive, servers MUST return keywords in
lowercase.
The IANA "IMAP and JMAP Keywords" registry at
<https://www.iana.org/assignments/imap-jmap-keywords/> as
established in [RFC5788] assigns semantic meaning to some other
keywords in common use. New keywords may be established here in
the future. In particular, note:
- "$forwarded": The Email has been forwarded.
- "$phishing": The Email is highly likely to be phishing.
Clients SHOULD warn users to take care when viewing this Email
and disable links and attachments.
Jenkins & Newman Standards Track [Page 25] RFC 8621 JMAP Mail August 2019
- "$junk": The Email is definitely spam. Clients SHOULD set this
flag when users report spam to help train automated spam-
detection systems.
- "$notjunk": The Email is definitely not spam. Clients SHOULD
set this flag when users indicate an Email is legitimate, to
help train automated spam-detection systems.
o size: "UnsignedInt" (immutable; server-set)
The size, in octets, of the raw data for the message [RFC5322] (as
referenced by the "blobId", i.e., the number of octets in the file
the user would download).
o receivedAt: "UTCDate" (immutable; default: time of creation on
server)
The date the Email was received by the message store. This is the
"internal date" in IMAP [RFC3501].
4.1.2. Header Fields Parsed Forms
Header field properties are derived from the message header fields [RFC5322] [RFC6532]. All header fields may be fetched in a raw form. Some header fields may also be fetched in a parsed form. The structured form that may be fetched depends on the header. The forms are defined in the subsections that follow.
4.1.2.1. Raw
Type: "String"
The raw octets of the header field value from the first octet following the header field name terminating colon, up to but excluding the header field terminating CRLF. Any standards-compliant message MUST be either ASCII (RFC 5322) or UTF-8 (RFC 6532); however, other encodings exist in the wild. A server SHOULD replace any octet or octet run with the high bit set that violates UTF-8 syntax with the unicode replacement character (U+FFFD). Any NUL octet MUST be dropped.
This form will typically have a leading space, as most generated messages insert a space after the colon that terminates the header field name.
Jenkins & Newman Standards Track [Page 26] RFC 8621 JMAP Mail August 2019
4.1.2.2. Text
Type: "String"
The header field value with:
1. White space unfolded (as defined in [RFC5322], Section 2.2.3).
2. The terminating CRLF at the end of the value removed.
3. Any SP characters at the beginning of the value removed.
4. Any syntactically correct encoded sections [RFC2047] with a known
character set decoded. Any NUL octets or control characters
encoded per [RFC2047] are dropped from the decoded value. Any
text that looks like syntax per [RFC2047] but violates placement
or white space rules per [RFC2047] MUST NOT be decoded.
5. The resulting unicode converted to Normalization Form C (NFC)
form.
If any decodings fail, the parser SHOULD insert a unicode replacement character (U+FFFD) and attempt to continue as much as possible.
To prevent obviously nonsense behaviour, which can lead to interoperability issues, this form may only be fetched or set for the following header fields:
o Subject
o Comments
o Keywords
o List-Id
o Any header field not defined in [RFC5322] or [RFC2369]
4.1.2.3. Addresses
Type: "EmailAddress[]"
The header field is parsed as an "address-list" value, as specified in [RFC5322], Section 3.4, into the "EmailAddress[]" type. There is an EmailAddress item for each "mailbox" parsed from the "address- list". Group and comment information is discarded.
Jenkins & Newman Standards Track [Page 27] RFC 8621 JMAP Mail August 2019
An *EmailAddress* object has the following properties:
o name: "String|null"
The "display-name" of the "mailbox" [RFC5322]. If this is a
"quoted-string":
1. The surrounding DQUOTE characters are removed.
2. Any "quoted-pair" is decoded.
3. White space is unfolded, and then any leading and trailing
white space is removed.
If there is no "display-name" but there is a "comment" immediately
following the "addr-spec", the value of this SHOULD be used
instead. Otherwise, this property is null.
o email: "String"
The "addr-spec" of the "mailbox" [RFC5322].
Any syntactically correct encoded sections [RFC2047] with a known encoding MUST be decoded, following the same rules as for the Text form (see Section 4.1.2.2).
Parsing SHOULD be best effort in the face of invalid structure to accommodate invalid messages and semi-complete drafts. EmailAddress objects MAY have an "email" property that does not conform to the "addr-spec" form (for example, may not contain an @ symbol).
For example, the following "address-list" string:
" James Smythe" <james@example.com>, Friends:
jane@example.com, =?UTF-8?Q?John_Sm=C3=AEth?=
<john@example.com>;
would be parsed as:
[
{ "name": "James Smythe", "email": "james@example.com" },
{ "name": null, "email": "jane@example.com" },
{ "name": "John Smith", "email": "john@example.com" }
]
Jenkins & Newman Standards Track [Page 28] RFC 8621 JMAP Mail August 2019
To prevent obviously nonsense behaviour, which can lead to interoperability issues, this form may only be fetched or set for the following header fields:
o From
o Sender
o Reply-To
o To
o Cc
o Bcc
o Resent-From
o Resent-Sender
o Resent-Reply-To
o Resent-To
o Resent-Cc
o Resent-Bcc
o Any header field not defined in [RFC5322] or [RFC2369]
4.1.2.4. GroupedAddresses
Type: "EmailAddressGroup[]"
This is similar to the Addresses form but preserves group information. The header field is parsed as an "address-list" value, as specified in [RFC5322], Section 3.4, into the "GroupedAddresses[]" type. Consecutive "mailbox" values that are not part of a group are still collected under an EmailAddressGroup object to provide a uniform type.
Jenkins & Newman Standards Track [Page 29] RFC 8621 JMAP Mail August 2019
An *EmailAddressGroup* object has the following properties:
o name: "String|null"
The "display-name" of the "group" [RFC5322], or null if the
addresses are not part of a group. If this is a "quoted-string",
it is processed the same as the "name" in the EmailAddress type.
o addresses: "EmailAddress[]"
The "mailbox" values that belong to this group, represented as
EmailAddress objects.
Any syntactically correct encoded sections [RFC2047] with a known encoding MUST be decoded, following the same rules as for the Text form (see Section 4.1.2.2).
Parsing SHOULD be best effort in the face of invalid structure to accommodate invalid messages and semi-complete drafts.
For example, the following "address-list" string:
" James Smythe" <james@example.com>, Friends:
jane@example.com, =?UTF-8?Q?John_Sm=C3=AEth?=
<john@example.com>;
would be parsed as:
[
{ "name": null, "addresses": [
{ "name": "James Smythe", "email": "james@example.com" }
]},
{ "name": "Friends", "addresses": [
{ "name": null, "email": "jane@example.com" },
{ "name": "John Smith", "email": "john@example.com" }
]}
]
To prevent obviously nonsense behaviour, which can lead to interoperability issues, this form may only be fetched or set for the same header fields as the Addresses form (see Section 4.1.2.3).
Jenkins & Newman Standards Track [Page 30] RFC 8621 JMAP Mail August 2019
4.1.2.5. MessageIds
Type: "String[]|null"
The header field is parsed as a list of "msg-id" values, as specified
in [RFC5322], Section 3.6.4, into the "String[]" type. Comments and/
or folding white space (CFWS) and surrounding angle brackets ("<>")
are removed. If parsing fails, the value is null.
To prevent obviously nonsense behaviour, which can lead to interoperability issues, this form may only be fetched or set for the following header fields:
o Message-ID
o In-Reply-To
o References
o Resent-Message-ID
o Any header field not defined in [RFC5322] or [RFC2369]
4.1.2.6. Date
Type: "Date|null"
The header field is parsed as a "date-time" value, as specified in [RFC5322], Section 3.3, into the "Date" type. If parsing fails, the value is null.
To prevent obviously nonsense behaviour, which can lead to interoperability issues, this form may only be fetched or set for the following header fields:
o Date
o Resent-Date
o Any header field not defined in [RFC5322] or [RFC2369]
Jenkins & Newman Standards Track [Page 31] RFC 8621 JMAP Mail August 2019
4.1.2.7. URLs
Type: "String[]|null"
The header field is parsed as a list of URLs, as described in [RFC2369], into the "String[]" type. Values do not include the surrounding angle brackets or any comments in the header field with the URLs. If parsing fails, the value is null.
To prevent obviously nonsense behaviour, which can lead to interoperability issues, this form may only be fetched or set for the following header fields:
o List-Help
o List-Unsubscribe
o List-Subscribe
o List-Post
o List-Owner
o List-Archive
o Any header field not defined in [RFC5322] or [RFC2369]
4.1.3. Header Fields Properties
The following low-level Email property is specified for complete access to the header data of the message:
o headers: "EmailHeader[]" (immutable)
This is a list of all header fields [RFC5322], in the same order
they appear in the message. An *EmailHeader* object has the
following properties:
- name: "String"
The header "field name" as defined in [RFC5322], with the same
capitalization that it has in the message.
- value: "String"
The header "field value" as defined in [RFC5322], in Raw form.
Jenkins & Newman Standards Track [Page 32] RFC 8621 JMAP Mail August 2019
In addition, the client may request/send properties representing individual header fields of the form:
header:{header-field-name}
Where "{header-field-name}" means any series of one or more printable
ASCII characters (i.e., characters that have values between 33 and
126, inclusive), except for colon (:). The property may also have
the following suffixes:
o :as{header-form}
This means the value is in a parsed form, where "{header-form}" is
one of the parsed-form names specified above. If not given, the
value is in Raw form.
o :all
This means the value is an array, with the items corresponding to
each instance of the header field, in the order they appear in the
message. If this suffix is not used, the result is the value of
the *last* instance of the header field (i.e., identical to the
last item in the array if :all is used), or null if none.
If both suffixes are used, they MUST be specified in the order above. Header field names are matched case insensitively. The value is typed according to the requested form or to an array of that type if :all is used. If no header fields exist in the message with the requested name, the value is null if fetching a single instance or an empty array if requesting :all.
As a simple example, if the client requests a property called "header:subject", this means find the *last* header field in the message named "subject" (matched case insensitively) and return the value in Raw form, or null if no header field of this name is found.
For a more complex example, consider the client requesting a property called "header:Resent-To:asAddresses:all". This means:
1. Find *all* header fields named Resent-To (matched case
insensitively).
2. For each instance, parse the header field value in the Addresses
form.
3. The result is of type "EmailAddress[][]" -- each item in the
array corresponds to the parsed value (which is itself an array)
of the Resent-To header field instance.
Jenkins & Newman Standards Track [Page 33] RFC 8621 JMAP Mail August 2019
The following convenience properties are also specified for the Email object:
o messageId: "String[]|null" (immutable)
The value is identical to the value of "header:Message-
ID:asMessageIds". For messages conforming to RFC 5322, this will
be an array with a single entry.
o inReplyTo: "String[]|null" (immutable)
The value is identical to the value of "header:In-Reply-
To:asMessageIds".
o references: "String[]|null" (immutable)
The value is identical to the value of
"header:References:asMessageIds".
o sender: "EmailAddress[]|null" (immutable)
The value is identical to the value of
"header:Sender:asAddresses".
o from: "EmailAddress[]|null" (immutable)
The value is identical to the value of "header:From:asAddresses".
o to: "EmailAddress[]|null" (immutable)
The value is identical to the value of "header:To:asAddresses".
o cc: "EmailAddress[]|null" (immutable)
The value is identical to the value of "header:Cc:asAddresses".
o bcc: "EmailAddress[]|null" (immutable)
The value is identical to the value of "header:Bcc:asAddresses".
o replyTo: "EmailAddress[]|null" (immutable)
The value is identical to the value of "header:Reply-
To:asAddresses".
o subject: "String|null" (immutable)
The value is identical to the value of "header:Subject:asText".
Jenkins & Newman Standards Track [Page 34] RFC 8621 JMAP Mail August 2019
o sentAt: "Date|null" (immutable; default on creation: current
server time)
The value is identical to the value of "header:Date:asDate".
4.1.4. Body Parts
These properties are derived from the message body [RFC5322] and its MIME entities [RFC2045].
An *EmailBodyPart* object has the following properties:
o partId: "String|null"
Identifies this part uniquely within the Email. This is scoped to
the "emailId" and has no meaning outside of the JMAP Email object
representation. This is null if, and only if, the part is of type
"multipart/*".
o blobId: "Id|null"
The id representing the raw octets of the contents of the part,
after decoding any known Content-Transfer-Encoding (as defined in
[RFC2045]), or null if, and only if, the part is of type
"multipart/*". Note that two parts may be transfer-encoded
differently but have the same blob id if their decoded octets are
identical and the server is using a secure hash of the data for
the blob id. If the transfer encoding is unknown, it is treated
as though it had no transfer encoding.
o size: "UnsignedInt"
The size, in octets, of the raw data after content transfer
decoding (as referenced by the "blobId", i.e., the number of
octets in the file the user would download).
o headers: "EmailHeader[]"
This is a list of all header fields in the part, in the order they
appear in the message. The values are in Raw form.
o name: "String|null"
This is the decoded "filename" parameter of the Content-
Disposition header field per [RFC2231], or (for compatibility with
existing systems) if not present, then it's the decoded "name"
parameter of the Content-Type header field per [RFC2047].
Jenkins & Newman Standards Track [Page 35] RFC 8621 JMAP Mail August 2019
o type: "String"
The value of the Content-Type header field of the part, if
present; otherwise, the implicit type as per the MIME standard
("text/plain" or "message/rfc822" if inside a "multipart/digest").
CFWS is removed and any parameters are stripped.
o charset: "String|null"
The value of the charset parameter of the Content-Type header
field, if present, or null if the header field is present but not
of type "text/*". If there is no Content-Type header field, or it
exists and is of type "text/*" but has no charset parameter, this
is the implicit charset as per the MIME standard: "us-ascii".
o disposition: "String|null"
The value of the Content-Disposition header field of the part, if
present; otherwise, it's null. CFWS is removed and any parameters
are stripped.
o cid: "String|null"
The value of the Content-Id header field of the part, if present;
otherwise, it's null. CFWS and surrounding angle brackets ("<>")
are removed. This may be used to reference the content from
within a "text/html" body part [HTML] using the "cid:" protocol,
as defined in [RFC2392].
o language: "String[]|null"
The list of language tags, as defined in [RFC3282], in the
Content-Language header field of the part, if present.
o location: "String|null"
The URI, as defined in [RFC2557], in the Content-Location header
field of the part, if present.
o subParts: "EmailBodyPart[]|null"
If the type is "multipart/*", this contains the body parts of each
child.
In addition, the client may request/send EmailBodyPart properties representing individual header fields, following the same syntax and semantics as for the Email object, e.g., "header:Content-Type".
Jenkins & Newman Standards Track [Page 36] RFC 8621 JMAP Mail August 2019
The following Email properties are specified for access to the body data of the message:
o bodyStructure: "EmailBodyPart" (immutable)
This is the full MIME structure of the message body, without
recursing into "message/rfc822" or "message/global" parts. Note
that EmailBodyParts may have subParts if they are of type
"multipart/*".
o bodyValues: "String[EmailBodyValue]" (immutable)
This is a map of "partId" to an EmailBodyValue object for none,
some, or all "text/*" parts. Which parts are included and whether
the value is truncated is determined by various arguments to
"Email/get" and "Email/parse". An *EmailBodyValue* object has the
following properties:
- value: "String"
The value of the body part after decoding Content-Transfer-
Encoding and the Content-Type charset, if both known to the
server, and with any CRLF replaced with a single LF. The
server MAY use heuristics to determine the charset to use for
decoding if the charset is unknown, no charset is given, or it
believes the charset given is incorrect. Decoding is best
effort; the server SHOULD insert the unicode replacement
character (U+FFFD) and continue when a malformed section is
encountered.
Note that due to the charset decoding and line ending
normalisation, the length of this string will probably not be
exactly the same as the "size" property on the corresponding
EmailBodyPart.
- isEncodingProblem: "Boolean" (default: false)
This is true if malformed sections were found while decoding
the charset, the charset was unknown, or the content-transfer-
encoding was unknown.
- isTruncated: "Boolean" (default: false)
This is true if the "value" has been truncated.
See the Security Considerations section for issues related to
truncation and heuristic determination of the content-type and
charset.
Jenkins & Newman Standards Track [Page 37] RFC 8621 JMAP Mail August 2019
o textBody: "EmailBodyPart[]" (immutable)
A list of "text/plain", "text/html", "image/*", "audio/*", and/or
"video/*" parts to display (sequentially) as the message body,
with a preference for "text/plain" when alternative versions are
available.
o htmlBody: "EmailBodyPart[]" (immutable)
A list of "text/plain", "text/html", "image/*", "audio/*", and/or
"video/*" parts to display (sequentially) as the message body,
with a preference for "text/html" when alternative versions are
available.
o attachments: "EmailBodyPart[]" (immutable)
A list, traversing depth-first, of all parts in "bodyStructure"
that satisfy either of the following conditions:
- not of type "multipart/*" and not included in "textBody" or
"htmlBody"
- of type "image/*", "audio/*", or "video/*" and not in both
"textBody" and "htmlBody"
None of these parts include subParts, including "message/*" types.
Attached messages may be fetched using the "Email/parse" method
and the "blobId".
Note that a "text/html" body part [HTML] may reference image parts
in attachments by using "cid:" links to reference the Content-Id,
as defined in [RFC2392], or by referencing the Content-Location.
o hasAttachment: "Boolean" (immutable; server-set)
This is true if there are one or more parts in the message that a
client UI should offer as downloadable. A server SHOULD set
hasAttachment to true if the "attachments" list contains at least
one item that does not have "Content-Disposition: inline". The
server MAY ignore parts in this list that are processed
automatically in some way or are referenced as embedded images in
one of the "text/html" parts of the message.
The server MAY set hasAttachment based on implementation-defined
or site-configurable heuristics.
Jenkins & Newman Standards Track [Page 38] RFC 8621 JMAP Mail August 2019
o preview: "String" (immutable; server-set)
A plaintext fragment of the message body. This is intended to be
shown as a preview line when listing messages in the mail store
and may be truncated when shown. The server may choose which part
of the message to include in the preview; skipping quoted sections
and salutations and collapsing white space can result in a more
useful preview.
This MUST NOT be more than 256 characters in length.
As this is derived from the message content by the server, and the
algorithm for doing so could change over time, fetching this for
an Email a second time MAY return a different result. However,
the previous value is not considered incorrect, and the change
SHOULD NOT cause the Email object to be considered as changed by
the server.
The exact algorithm for decomposing bodyStructure into textBody,
htmlBody, and attachments part lists is not mandated, as this is a
quality-of-service implementation issue and likely to require
workarounds for malformed content discovered over time. However, the
following algorithm (expressed here in JavaScript) is suggested as a
starting point, based on real-world experience:
function isInlineMediaType ( type ) {
return type.startsWith( 'image/' ) ||
type.startsWith( 'audio/' ) ||
type.startsWith( 'video/' );
}
function parseStructure ( parts, multipartType, inAlternative,
htmlBody, textBody, attachments ) {
// For multipartType == alternative
let textLength = textBody ? textBody.length : -1;
let htmlLength = htmlBody ? htmlBody.length : -1;
for ( let i = 0; i < parts.length; i += 1 ) {
let part = parts[i];
let isMultipart = part.type.startsWith( 'multipart/' );
// Is this a body part rather than an attachment
let isInline = part.disposition != "attachment" &&
// Must be one of the allowed body types
( part.type == "text/plain" ||
part.type == "text/html" ||
isInlineMediaType( part.type ) ) &&
Jenkins & Newman Standards Track [Page 39] RFC 8621 JMAP Mail August 2019
// If multipart/related, only the first part can be inline
// If a text part with a filename, and not the first item
// in the multipart, assume it is an attachment
( i === 0 ||
( multipartType != "related" &&
( isInlineMediaType( part.type ) || !part.name ) ) );
if ( isMultipart ) {
let subMultiType = part.type.split( '/' )[1];
parseStructure( part.subParts, subMultiType,
inAlternative || ( subMultiType == 'alternative' ),
htmlBody, textBody, attachments );
} else if ( isInline ) {
if ( multipartType == 'alternative' ) {
switch ( part.type ) {
case 'text/plain':
textBody.push( part );
break;
case 'text/html':
htmlBody.push( part );
break;
default:
attachments.push( part );
break;
}
continue;
} else if ( inAlternative ) {
if ( part.type == 'text/plain' ) {
htmlBody = null;
}
if ( part.type == 'text/html' ) {
textBody = null;
}
}
if ( textBody ) {
textBody.push( part );
}
if ( htmlBody ) {
htmlBody.push( part );
}
if ( ( !textBody || !htmlBody ) &&
isInlineMediaType( part.type ) ) {
attachments.push( part );
}
} else {
attachments.push( part );
}
}
Jenkins & Newman Standards Track [Page 40] RFC 8621 JMAP Mail August 2019
if ( multipartType == 'alternative' && textBody && htmlBody ) {
// Found HTML part only
if ( textLength == textBody.length &&
htmlLength != htmlBody.length ) {
for ( let i = htmlLength; i < htmlBody.length; i += 1 ) {
textBody.push( htmlBody[i] );
}
}
// Found plaintext part only
if ( htmlLength == htmlBody.length &&
textLength != textBody.length ) {
for ( let i = textLength; i < textBody.length; i += 1 ) {
htmlBody.push( textBody[i] );
}
}
}
}
// Usage: let htmlBody = []; let textBody = []; let attachments = [];
parseStructure( [ bodyStructure ], 'mixed', false,
htmlBody, textBody, attachments );
For instance, consider a message with both text and HTML versions that has gone through a list software manager that attaches a header and footer. It might have a MIME structure something like:
multipart/mixed
text/plain, content-disposition=inline - A
multipart/mixed
multipart/alternative
multipart/mixed
text/plain, content-disposition=inline - B
image/jpeg, content-disposition=inline - C
text/plain, content-disposition=inline - D
multipart/related
text/html - E
image/jpeg - F
image/jpeg, content-disposition=attachment - G
application/x-excel - H
message/rfc822 - J
text/plain, content-disposition=inline - K
Jenkins & Newman Standards Track [Page 41] RFC 8621 JMAP Mail August 2019
In this case, the above algorithm would decompose this to:
textBody => [ A, B, C, D, K ]
htmlBody => [ A, E, K ]
attachments => [ C, F, G, H, J ]
4.2. Email/get
This is a standard "/get" method as described in [RFC8620], Section 5.1 with the following additional request arguments:
o bodyProperties: "String[]"
A list of properties to fetch for each EmailBodyPart returned. If
omitted, this defaults to:
[ "partId", "blobId", "size", "name", "type", "charset",
"disposition", "cid", "language", "location" ]
o fetchTextBodyValues: "Boolean" (default: false)
If true, the "bodyValues" property includes any "text/*" part in
the "textBody" property.
o fetchHTMLBodyValues: "Boolean" (default: false)
If true, the "bodyValues" property includes any "text/*" part in
the "htmlBody" property.
o fetchAllBodyValues: "Boolean" (default: false)
If true, the "bodyValues" property includes any "text/*" part in
the "bodyStructure" property.
o maxBodyValueBytes: "UnsignedInt" (default: 0)
If greater than zero, the "value" property of any EmailBodyValue
object returned in "bodyValues" MUST be truncated if necessary so
it does not exceed this number of octets in size. If 0 (the
default), no truncation occurs.
The server MUST ensure the truncation results in valid UTF-8 and
does not occur mid-codepoint. If the part is of type "text/html",
the server SHOULD NOT truncate inside an HTML tag, e.g., in the
middle of "<a href="https://example.com">". There is no
requirement for the truncated form to be a balanced tree or valid
HTML (indeed, the original source may well be neither of these
things).
Jenkins & Newman Standards Track [Page 42] RFC 8621 JMAP Mail August 2019
If the standard "properties" argument is omitted or null, the following default MUST be used instead of "all" properties:
[ "id", "blobId", "threadId", "mailboxIds", "keywords", "size", "receivedAt", "messageId", "inReplyTo", "references", "sender", "from", "to", "cc", "bcc", "replyTo", "subject", "sentAt", "hasAttachment", "preview", "bodyValues", "textBody", "htmlBody", "attachments" ]
The following properties are expected to be fast to fetch in a quality implementation:
o id
o blobId
o threadId
o mailboxIds
o keywords
o size
o receivedAt
o messageId
o inReplyTo
o sender
o from
o to
o cc
o bcc
o replyTo
o subject
o sentAt
o hasAttachment
o preview
Jenkins & Newman Standards Track [Page 43] RFC 8621 JMAP Mail August 2019
Clients SHOULD take care when fetching any other properties, as there may be significantly longer latency in fetching and returning the data.
As specified above, parsed forms of headers may only be used on appropriate header fields. Attempting to fetch a form that is forbidden (e.g., "header:From:asDate") MUST result in the method call being rejected with an "invalidArguments" error.
Where a specific header field is requested as a property, the capitalization of the property name in the response MUST be identical to that used in the request.
4.2.1. Example
Request:
[[ "Email/get", {
"ids": [ "f123u456", "f123u457" ],
"properties": [ "threadId", "mailboxIds", "from", "subject",
"receivedAt", "header:List-POST:asURLs",
"htmlBody", "bodyValues" ],
"bodyProperties": [ "partId", "blobId", "size", "type" ],
"fetchHTMLBodyValues": true,
"maxBodyValueBytes": 256
}, "#1" ]]
and response:
[[ "Email/get", {
"accountId": "abc",
"state": "41234123231",
"list": [
{
"id": "f123u457",
"threadId": "ef1314a",
"mailboxIds": { "f123": true },
"from": [{ "name": "Joe Bloggs", "email": "joe@example.com" }],
"subject": "Dinner on Thursday?",
"receivedAt": "2013-10-13T14:12:00Z",
"header:List-POST:asURLs": [
"mailto:partytime@lists.example.com"
],
"htmlBody": [{
"partId": "1",
"blobId": "B841623871",
"size": 283331,
"type": "text/html"
Jenkins & Newman Standards Track [Page 44] RFC 8621 JMAP Mail August 2019
}, {
"partId": "2",
"blobId": "B319437193",
"size": 10343,
"type": "text/plain"
}],
"bodyValues": {
"1": {
"isEncodingProblem": false,
"isTruncated": true,
"value": "<html><body><p>Hello ..."
},
"2": {
"isEncodingProblem": false,
"isTruncated": false,
"value": "-- Sent by your friendly mailing list ..."
}
}
}
],
"notFound": [ "f123u456" ]
}, "#1" ]]
4.3. Email/changes
This is a standard "/changes" method as described in [RFC8620], Section 5.2. If generating intermediate states for a large set of changes, it is recommended that newer changes be returned first, as these are generally of more interest to users.
4.4. Email/query
This is a standard "/query" method as described in [RFC8620], Section 5.5 but with the following additional request arguments:
o collapseThreads: "Boolean" (default: false)
If true, Emails in the same Thread as a previous Email in the list
(given the filter and sort order) will be removed from the list.
This means only one Email at most will be included in the list for
any given Thread.
In quality implementations, the query "total" property is expected to be fast to calculate when the filter consists solely of a single "inMailbox" property, as it is the same as the totalEmails or totalThreads properties (depending on whether collapseThreads is true) of the associated Mailbox object.
Jenkins & Newman Standards Track [Page 45] RFC 8621 JMAP Mail August 2019
4.4.1. Filtering
A *FilterCondition* object has the following properties, any of which may be omitted:
o inMailbox: "Id"
A Mailbox id. An Email must be in this Mailbox to match the
condition.
o inMailboxOtherThan: "Id[]"
A list of Mailbox ids. An Email must be in at least one Mailbox
not in this list to match the condition. This is to allow
messages solely in trash/spam to be easily excluded from a search.
o before: "UTCDate"
The "receivedAt" date-time of the Email must be before this date-
time to match the condition.
o after: "UTCDate"
The "receivedAt" date-time of the Email must be the same or after
this date-time to match the condition.
o minSize: "UnsignedInt"
The "size" property of the Email must be equal to or greater than
this number to match the condition.
o maxSize: "UnsignedInt"
The "size" property of the Email must be less than this number to
match the condition.
o allInThreadHaveKeyword: "String"
All Emails (including this one) in the same Thread as this Email
must have the given keyword to match the condition.
o someInThreadHaveKeyword: "String"
At least one Email (possibly this one) in the same Thread as this
Email must have the given keyword to match the condition.
Jenkins & Newman Standards Track [Page 46] RFC 8621 JMAP Mail August 2019
o noneInThreadHaveKeyword: "String"
All Emails (including this one) in the same Thread as this Email
must *not* have the given keyword to match the condition.
o hasKeyword: "String"
This Email must have the given keyword to match the condition.
o notKeyword: "String"
This Email must not have the given keyword to match the condition.
o hasAttachment: "Boolean"
The "hasAttachment" property of the Email must be identical to the
value given to match the condition.
o text: "String"
Looks for the text in Emails. The server MUST look up text in the
From, To, Cc, Bcc, and Subject header fields of the message and
SHOULD look inside any "text/*" or other body parts that may be
converted to text by the server. The server MAY extend the search
to any additional textual property.
o from: "String"
Looks for the text in the From header field of the message.
o to: "String"
Looks for the text in the To header field of the message.
o cc: "String"
Looks for the text in the Cc header field of the message.
o bcc: "String"
Looks for the text in the Bcc header field of the message.
o subject: "String"
Looks for the text in the Subject header field of the message.
Jenkins & Newman Standards Track [Page 47] RFC 8621 JMAP Mail August 2019
o body: "String"
Looks for the text in one of the body parts of the message. The
server MAY exclude MIME body parts with content media types other
than "text/*" and "message/*" from consideration in search
matching. Care should be taken to match based on the text content
actually presented to an end user by viewers for that media type
or otherwise identified as appropriate for search indexing.
Matching document metadata uninteresting to an end user (e.g.,
markup tag and attribute names) is undesirable.
o header: "String[]"
The array MUST contain either one or two elements. The first
element is the name of the header field to match against. The
second (optional) element is the text to look for in the header
field value. If not supplied, the message matches simply if it
has a header field of the given name.
If zero properties are specified on the FilterCondition, the condition MUST always evaluate to true. If multiple properties are specified, ALL must apply for the condition to be true (it is equivalent to splitting the object into one-property conditions and making them all the child of an AND filter operator).
The exact semantics for matching "String" fields is *deliberately not defined* to allow for flexibility in indexing implementation, subject to the following:
o Any syntactically correct encoded sections [RFC2047] of header
fields with a known encoding SHOULD be decoded before attempting
to match text.
o When searching inside a "text/html" body part, any text considered
markup rather than content SHOULD be ignored, including HTML tags
and most attributes, anything inside the "<head>" tag, Cascading
Style Sheets (CSS), and JavaScript. Attribute content intended
for presentation to the user such as "alt" and "title" SHOULD be
considered in the search.
o Text SHOULD be matched in a case-insensitive manner.
o Text contained in either (but matched) single (') or double (")
quotes SHOULD be treated as a *phrase search*; that is, a match is
required for that exact word or sequence of words, excluding the
surrounding quotation marks.
Jenkins & Newman Standards Track [Page 48] RFC 8621 JMAP Mail August 2019
Within a phrase, to match one of the following characters you MUST
escape it by prefixing it with a backslash (\):
' " \
o Outside of a phrase, white space SHOULD be treated as dividing
separate tokens that may be searched for separately but MUST all
be present for the Email to match the filter.
o Tokens (not part of a phrase) MAY be matched on a whole-word basis
using stemming (for example, a text search for "bus" would match
"buses" but not "business").
4.4.2. Sorting
The following value for the "property" field on the Comparator object MUST be supported for sorting:
o "receivedAt" - The "receivedAt" date as returned in the Email
object.
The following values for the "property" field on the Comparator object SHOULD be supported for sorting. When specifying a "hasKeyword", "allInThreadHaveKeyword", or "someInThreadHaveKeyword" sort, the Comparator object MUST also have a "keyword" property.
o "size" - The "size" as returned in the Email object.
o "from" - This is taken to be either the "name" property or if
null/empty, the "email" property of the *first* EmailAddress
object in the Email's "from" property. If still none, consider
the value to be the empty string.
o "to" - This is taken to be either the "name" property or if null/
empty, the "email" property of the *first* EmailAddress object in
the Email's "to" property. If still none, consider the value to
be the empty string.
o "subject" - This is taken to be the base subject of the message,
as defined in Section 2.1 of [RFC5256].
o "sentAt" - The "sentAt" property on the Email object.
o "hasKeyword" - This value MUST be considered true if the Email has
the keyword given as an additional "keyword" property on the
Comparator object, or false otherwise.
Jenkins & Newman Standards Track [Page 49] RFC 8621 JMAP Mail August 2019
o "allInThreadHaveKeyword" - This value MUST be considered true for
the Email if *all* of the Emails in the same Thread have the
keyword given as an additional "keyword" property on the
Comparator object.
o "someInThreadHaveKeyword" - This value MUST be considered true for
the Email if *any* of the Emails in the same Thread have the
keyword given as an additional "keyword" property on the
Comparator object.
The server MAY support sorting based on other properties as well. A
client can discover which properties are supported by inspecting the
account's "capabilities" object (see Section 1.3).
Example sort:
[{
"property": "someInThreadHaveKeyword",
"keyword": "$flagged",
"isAscending": false
}, {
"property": "subject",
"collation": "i;ascii-casemap"
}, {
"property": "receivedAt",
"isAscending": false
}]
This would sort Emails in flagged Threads first (the Thread is considered flagged if any Email within it is flagged), in subject order second, and then from newest first for messages with the same subject. If two Emails have identical values for all three properties, then the order is server dependent but must be stable.
4.4.3. Thread Collapsing
When "collapseThreads" is true, then after filtering and sorting the Email list, the list is further winnowed by removing any Emails for a Thread id that has already been seen (when passing through the list sequentially). A Thread will therefore only appear *once* in the result, at the position of the first Email in the list that belongs to the Thread (given the current sort/filter).
Jenkins & Newman Standards Track [Page 50] RFC 8621 JMAP Mail August 2019
4.5. Email/queryChanges
This is a standard "/queryChanges" method as described in [RFC8620], Section 5.6 with the following additional request argument:
o collapseThreads: "Boolean" (default: false)
The "collapseThreads" argument that was used with "Email/query".
4.6. Email/set
This is a standard "/set" method as described in [RFC8620], Section 5.3. The "Email/set" method encompasses:
o Creating a draft
o Changing the keywords of an Email (e.g., unread/flagged status)
o Adding/removing an Email to/from Mailboxes (moving a message)
o Deleting Emails
The format of the "keywords"/"mailboxIds" properties means that when updating an Email, you can either replace the entire set of keywords/ Mailboxes (by setting the full value of the property) or add/remove individual ones using the JMAP patch syntax (see [RFC8620], Section 5.3 for the specification and Section 5.7 for an example).
Due to the format of the Email object, when creating an Email, there are a number of ways to specify the same information. To ensure that the message [RFC5322] to create is unambiguous, the following constraints apply to Email objects submitted for creation:
o The "headers" property MUST NOT be given on either the top-level
Email or an EmailBodyPart -- the client must set each header field
as an individual property.
o There MUST NOT be two properties that represent the same header
field (e.g., "header:from" and "from") within the Email or
particular EmailBodyPart.
o Header fields MUST NOT be specified in parsed forms that are
forbidden for that particular field.
o Header fields beginning with "Content-" MUST NOT be specified on
the Email object, only on EmailBodyPart objects.
Jenkins & Newman Standards Track [Page 51] RFC 8621 JMAP Mail August 2019
o If a "bodyStructure" property is given, there MUST NOT be
"textBody", "htmlBody", or "attachments" properties.
o If given, the "bodyStructure" EmailBodyPart MUST NOT contain a
property representing a header field that is already defined on
the top-level Email object.
o If given, textBody MUST contain exactly one body part and it MUST
be of type "text/plain".
o If given, htmlBody MUST contain exactly one body part and it MUST
be of type "text/html".
o Within an EmailBodyPart:
- The client may specify a partId OR a blobId, but not both. If
a partId is given, this partId MUST be present in the
"bodyValues" property.
- The "charset" property MUST be omitted if a partId is given
(the part's content is included in bodyValues, and the server
may choose any appropriate encoding).
- The "size" property MUST be omitted if a partId is given. If a
blobId is given, it may be included but is ignored by the
server (the size is actually calculated from the blob content
itself).
- A Content-Transfer-Encoding header field MUST NOT be given.
o Within an EmailBodyValue object, isEncodingProblem and isTruncated
MUST be either false or omitted.
Creation attempts that violate any of this SHOULD be rejected with an "invalidProperties" error; however, a server MAY choose to modify the Email (e.g., choose between conflicting headers, use a different content-encoding, etc.) to comply with its requirements instead.
The server MAY also choose to set additional headers. If not included, the server MUST generate and set a Message-ID header field in conformance with [RFC5322], Section 3.6.4 and a Date header field in conformance with Section 3.6.1.
The final message generated may be invalid per RFC 5322. For example, if it is a half-finished draft, the To header field may have a value that does not conform to the required syntax for this header. The message will be checked for strict conformance when submitted for sending (see the EmailSubmission object description).
Jenkins & Newman Standards Track [Page 52] RFC 8621 JMAP Mail August 2019
Destroying an Email removes it from all Mailboxes to which it belonged. To just delete an Email to trash, simply change the "mailboxIds" property, so it is now in the Mailbox with a "role" property equal to "trash", and remove all other Mailbox ids.
When emptying the trash, clients SHOULD NOT destroy Emails that are also in a Mailbox other than trash. For those Emails, they SHOULD just remove the trash Mailbox from the Email.
For successfully created Email objects, the "created" response contains the "id", "blobId", "threadId", and "size" properties of the object.
The following extra SetError types are defined:
For "create":
o "blobNotFound": At least one blob id given for an EmailBodyPart
doesn't exist. An extra "notFound" property of type "Id[]" MUST
be included in the SetError object containing every "blobId"
referenced by an EmailBodyPart that could not be found on the
server.
For "create" and "update":
o "tooManyKeywords": The change to the Email's keywords would exceed
a server-defined maximum.
o "tooManyMailboxes": The change to the set of Mailboxes that this
Email is in would exceed a server-defined maximum.
4.7. Email/copy
This is a standard "/copy" method as described in [RFC8620], Section 5.4, except only the "mailboxIds", "keywords", and "receivedAt" properties may be set during the copy. This method cannot modify the message represented by the Email.
The server MAY forbid two Email objects with identical message content [RFC5322], or even just with the same Message-ID [RFC5322], to coexist within an account; if the target account already has the Email, the copy will be rejected with a standard "alreadyExists" error.
For successfully copied Email objects, the "created" response contains the "id", "blobId", "threadId", and "size" properties of the new object.
Jenkins & Newman Standards Track [Page 53] RFC 8621 JMAP Mail August 2019
4.8. Email/import
The "Email/import" method adds messages [RFC5322] to the set of Emails in an account. The server MUST support messages with Email Address Internationalization (EAI) headers [RFC6532]. The messages must first be uploaded as blobs using the standard upload mechanism. The method takes the following arguments:
o accountId: "Id"
The id of the account to use.
o ifInState: "String|null"
This is a state string as returned by the "Email/get" method. If
supplied, the string must match the current state of the account
referenced by the accountId; otherwise, the method will be aborted
and a "stateMismatch" error returned. If null, any changes will
be applied to the current state.
o emails: "Id[EmailImport]"
A map of creation id (client specified) to EmailImport objects.
An *EmailImport* object has the following properties:
o blobId: "Id"
The id of the blob containing the raw message [RFC5322].
o mailboxIds: "Id[Boolean]"
The ids of the Mailboxes to assign this Email to. At least one
Mailbox MUST be given.
o keywords: "String[Boolean]" (default: {})
The keywords to apply to the Email.
o receivedAt: "UTCDate" (default: time of most recent Received
header, or time of import on server if none)
The "receivedAt" date to set on the Email.
Each Email to import is considered an atomic unit that may succeed or fail individually. Importing successfully creates a new Email object from the data referenced by the blobId and applies the given Mailboxes, keywords, and receivedAt date.
Jenkins & Newman Standards Track [Page 54] RFC 8621 JMAP Mail August 2019
The server MAY forbid two Email objects with the same exact content [RFC5322], or even just with the same Message-ID [RFC5322], to coexist within an account. In this case, it MUST reject attempts to import an Email considered to be a duplicate with an "alreadyExists" SetError. An "existingId" property of type "Id" MUST be included on the SetError object with the id of the existing Email. If duplicates are allowed, the newly created Email object MUST have a separate id and independent mutable properties to the existing object.
If the "blobId", "mailboxIds", or "keywords" properties are invalid (e.g., missing, wrong type, id not found), the server MUST reject the import with an "invalidProperties" SetError.
If the Email cannot be imported because it would take the account over quota, the import should be rejected with an "overQuota" SetError.
If the blob referenced is not a valid message [RFC5322], the server MAY modify the message to fix errors (such as removing NUL octets or fixing invalid headers). If it does this, the "blobId" on the response MUST represent the new representation and therefore be different to the "blobId" on the EmailImport object. Alternatively, the server MAY reject the import with an "invalidEmail" SetError.
The response has the following arguments:
o accountId: "Id"
The id of the account used for this call.
o oldState: "String|null"
The state string that would have been returned by "Email/get" on
this account before making the requested changes, or null if the
server doesn't know what the previous state string was.
o newState: "String"
The state string that will now be returned by "Email/get" on this
account.
o created: "Id[Email]|null"
A map of the creation id to an object containing the "id",
"blobId", "threadId", and "size" properties for each successfully
imported Email, or null if none.
Jenkins & Newman Standards Track [Page 55] RFC 8621 JMAP Mail August 2019
o notCreated: "Id[SetError]|null"
A map of the creation id to a SetError object for each Email that
failed to be created, or null if all successful. The possible
errors are defined above.
The following additional errors may be returned instead of the "Email/import" response:
"stateMismatch": An "ifInState" argument was supplied, and it does not match the current state.
4.9. Email/parse
This method allows you to parse blobs as messages [RFC5322] to get Email objects. The server MUST support messages with EAI headers [RFC6532]. This can be used to parse and display attached messages without having to import them as top-level Email objects in the mail store in their own right.
The following metadata properties on the Email objects will be null if requested:
o id
o mailboxIds
o keywords
o receivedAt
The "threadId" property of the Email MAY be present if the server can calculate which Thread the Email would be assigned to were it to be imported. Otherwise, this too is null if fetched.
The "Email/parse" method takes the following arguments:
o accountId: "Id"
The id of the account to use.
o blobIds: "Id[]"
The ids of the blobs to parse.
Jenkins & Newman Standards Track [Page 56] RFC 8621 JMAP Mail August 2019
o properties: "String[]"
If supplied, only the properties listed in the array are returned
for each Email object. If omitted, defaults to:
[ "messageId", "inReplyTo", "references", "sender", "from", "to",
"cc", "bcc", "replyTo", "subject", "sentAt", "hasAttachment",
"preview", "bodyValues", "textBody", "htmlBody", "attachments" ]
o bodyProperties: "String[]"
A list of properties to fetch for each EmailBodyPart returned. If
omitted, defaults to the same value as the "Email/get"
"bodyProperties" default argument.
o fetchTextBodyValues: "Boolean" (default: false)
If true, the "bodyValues" property includes any "text/*" part in
the "textBody" property.
o fetchHTMLBodyValues: "Boolean" (default: false)
If true, the "bodyValues" property includes any "text/*" part in
the "htmlBody" property.
o fetchAllBodyValues: "Boolean" (default: false)
If true, the "bodyValues" property includes any "text/*" part in
the "bodyStructure" property.
o maxBodyValueBytes: "UnsignedInt" (default: 0)
If greater than zero, the "value" property of any EmailBodyValue
object returned in "bodyValues" MUST be truncated if necessary so
it does not exceed this number of octets in size. If 0 (the
default), no truncation occurs.
The server MUST ensure the truncation results in valid UTF-8 and
does not occur mid-codepoint. If the part is of type "text/html",
the server SHOULD NOT truncate inside an HTML tag, e.g., in the
middle of "<a href="https://example.com">". There is no
requirement for the truncated form to be a balanced tree or valid
HTML (indeed, the original source may well be neither of these
things).
Jenkins & Newman Standards Track [Page 57] RFC 8621 JMAP Mail August 2019
The response has the following arguments:
o accountId: "Id"
The id of the account used for the call.
o parsed: "Id[Email]|null"
A map of blob id to parsed Email representation for each
successfully parsed blob, or null if none.
o notParsable: "Id[]|null"
A list of ids given that corresponded to blobs that could not be
parsed as Emails, or null if none.
o notFound: "Id[]|null"
A list of blob ids given that could not be found, or null if none.
As specified above, parsed forms of headers may only be used on appropriate header fields. Attempting to fetch a form that is forbidden (e.g., "header:From:asDate") MUST result in the method call being rejected with an "invalidArguments" error.
Where a specific header field is requested as a property, the capitalization of the property name in the response MUST be identical to that used in the request.
4.10. Examples
A client logs in for the first time. It first fetches the set of Mailboxes. Now it will display the inbox to the user, which we will presume has Mailbox id "fb666a55". The inbox may be (very!) large, but the user's screen is only so big, so the client can just load the Threads it needs to fill the screen and then load in more only when the user scrolls. The client sends this request:
[[ "Email/query",{
"accountId": "ue150411c",
"filter": {
"inMailbox": "fb666a55"
},
"sort": [{
"isAscending": false,
"property": "receivedAt"
}],
"collapseThreads": true,
Jenkins & Newman Standards Track [Page 58] RFC 8621 JMAP Mail August 2019
"position": 0,
"limit": 30,
"calculateTotal": true
}, "0" ],
[ "Email/get", {
"accountId": "ue150411c",
"#ids": {
"resultOf": "0",
"name": "Email/query",
"path": "/ids"
},
"properties": [
"threadId"
]
}, "1" ],
[ "Thread/get", {
"accountId": "ue150411c",
"#ids": {
"resultOf": "1",
"name": "Email/get",
"path": "/list/*/threadId"
}
}, "2" ],
[ "Email/get", {
"accountId": "ue150411c",
"#ids": {
"resultOf": "2",
"name": "Thread/get",
"path": "/list/*/emailIds"
},
"properties": [
"threadId",
"mailboxIds",
"keywords",
"hasAttachment",
"from",
"subject",
"receivedAt",
"size",
"preview"
]
}, "3" ]]
Jenkins & Newman Standards Track [Page 59] RFC 8621 JMAP Mail August 2019
Let's break down the 4 method calls to see what they're doing:
"0": This asks the server for the ids of the first 30 Email objects in the inbox, sorted newest first, ignoring Emails from the same Thread as a newer Email in the Mailbox (i.e., it is the first 30 unique Threads).
"1": Now we use a back-reference to fetch the Thread ids for each of these Email ids.
"2": Another back-reference fetches the Thread object for each of these Thread ids.
"3": Finally, we fetch the information we need to display the Mailbox listing (but no more!) for every Email in each of these 30 Threads. The client may aggregate this data for display, for example, by showing the Thread as "flagged" if any of the Emails in it has the "$flagged" keyword.
The response from the server may look something like this:
[[ "Email/query", {
"accountId": "ue150411c",
"queryState": "09aa9a075588-780599:0",
"canCalculateChanges": true,
"position": 0,
"total": 115,
"ids": [ "Ma783e5cdf5f2deffbc97930a",
"M9bd17497e2a99cb345fc1d0a", ... ]
}, "0" ],
[ "Email/get", {
"accountId": "ue150411c",
"state": "780599",
"list": [{
"id": "Ma783e5cdf5f2deffbc97930a",
"threadId": "T36703c2cfe9bd5ed"
}, {
"id": "M9bd17497e2a99cb345fc1d0a",
"threadId": "T0a22ad76e9c097a1"
}, ... ],
"notFound": []
}, "1" ],
[ "Thread/get", {
"accountId": "ue150411c",
"state": "22a8728b",
"list": [{
"id": "T36703c2cfe9bd5ed",
"emailIds": [ "Ma783e5cdf5f2deffbc97930a" ]
Jenkins & Newman Standards Track [Page 60] RFC 8621 JMAP Mail August 2019
}, {
"id": "T0a22ad76e9c097a1",
"emailIds": [ "M3b568670a63e5d100f518fa5",
"M9bd17497e2a99cb345fc1d0a" ]
}, ... ],
"notFound": []
}, "2" ],
[ "Email/get", {
"accountId": "ue150411c",
"state": "780599",
"list": [{
"id": "Ma783e5cdf5f2deffbc97930a",
"threadId": "T36703c2cfe9bd5ed",
"mailboxIds": {
"fb666a55": true
},
"keywords": {
"$seen": true,
"$flagged": true
},
"hasAttachment": true,
"from": [{
"email": "jdoe@example.com",
"name": "Jane Doe"
}],
"subject": "The Big Reveal",
"receivedAt": "2018-06-27T00:20:35Z",
"size": 175047,
"preview": "As you may be aware, we are required to prepare a
presentation where we wow a panel of 5 random members of the
public, on or before 30 June each year. We have drafted..."
},
...
],
"notFound": []
}, "3" ]]
Jenkins & Newman Standards Track [Page 61] RFC 8621 JMAP Mail August 2019
Now, on another device, the user marks the first Email as unread, sending this API request:
[[ "Email/set", {
"accountId": "ue150411c",
"update": {
"Ma783e5cdf5f2deffbc97930a": {
"keywords/$seen": null
}
}
}, "0" ]]
The server applies this and sends the success response:
[[ "Email/set", {
"accountId": "ue150411c",
"oldState": "780605",
"newState": "780606",
"updated": {
"Ma783e5cdf5f2deffbc97930a": null
},
...
}, "0" ]]
The user also deletes a few Emails, and then a new message arrives.
Jenkins & Newman Standards Track [Page 62] RFC 8621 JMAP Mail August 2019
Back on our original machine, we receive a push update that the state string for Email is now "780800". As this does not match the client's current state, it issues a request for the changes:
[[ "Email/changes", {
"accountId": "ue150411c",
"sinceState": "780605",
"maxChanges": 50
}, "3" ],
[ "Email/queryChanges", {
"accountId": "ue150411c",
"filter": {
"inMailbox": "fb666a55"
},
"sort": [{
"property": "receivedAt",
"isAscending": false
}],
"collapseThreads": true,
"sinceQueryState": "09aa9a075588-780599:0",
"upToId": "Mc2781d5e856a908d8a35a564",
"maxChanges": 25,
"calculateTotal": true
}, "11" ]]
The response:
[[ "Email/changes", {
"accountId": "ue150411c",
"oldState": "780605",
"newState": "780800",
"hasMoreChanges": false,
"created": [ "Me8de6c9f6de198239b982ea2" ],
"updated": [ "Ma783e5cdf5f2deffbc97930a" ],
"destroyed": [ "M9bd17497e2a99cb345fc1d0a", ... ]
}, "3" ],
[ "Email/queryChanges", {
"accountId": "ue150411c",
"oldQueryState": "09aa9a075588-780599:0",
"newQueryState": "e35e9facf117-780615:0",
"added": [{
"id": "Me8de6c9f6de198239b982ea2",
"index": 0
}],
"removed": [ "M9bd17497e2a99cb345fc1d0a" ],
"total": 115
}, "11" ]]
Jenkins & Newman Standards Track [Page 63] RFC 8621 JMAP Mail August 2019
The client can update its local cache of the query results by removing "M9bd17497e2a99cb345fc1d0a" and then splicing in "Me8de6c9f6de198239b982ea2" at position 0. As it does not have the data for this new Email, it will then fetch it (it also could have done this in the same request using back-references).
It knows something has changed about "Ma783e5cdf5f2deffbc97930a", so it will refetch the Mailbox ids and keywords (the only mutable properties) for this Email too.
The user starts composing a new Email. The email is plaintext and the client knows the email in English so adds this metadata to the body part. The user saves a draft while the composition is still in progress. The client sends:
[[ "Email/set", {
"accountId": "ue150411c",
"create": {
"k192": {
"mailboxIds": {
"2ea1ca41b38e": true
},
"keywords": {
"$seen": true,
"$draft": true
},
"from": [{
"name": "Joe Bloggs",
"email": "joe@example.com"
}],
"subject": "World domination",
"receivedAt": "2018-07-10T01:03:11Z",
"sentAt": "2018-07-10T11:03:11+10:00",
"bodyStructure": {
"type": "text/plain",
"partId": "bd48",
"header:Content-Language": "en"
},
"bodyValues": {
"bd48": {
"value": "I have the most brilliant plan. Let me tell
you all about it. What we do is, we",
"isTruncated": false
}
}
}
}
}, "0" ]]
Jenkins & Newman Standards Track [Page 64] RFC 8621 JMAP Mail August 2019
The server creates the message and sends the success response:
[[ "Email/set", {
"accountId": "ue150411c",
"oldState": "780823",
"newState": "780839",
"created": {
"k192": {
"id": "Mf40b5f831efa7233b9eb1c7f",
"blobId": "Gf40b5f831efa7233b9eb1c7f8f97d84eeeee64f7",
"threadId": "Td957e72e89f516dc",
"size": 359
}
},
...
}, "0" ]]
The message created on the server looks something like this:
Message-Id: <bbce0ae9-58be-4b24-ac82-deb840d58016@sloti7d1t02> User-Agent: Cyrus-JMAP/3.1.6-736-gdfb8e44 Mime-Version: 1.0 Date: Tue, 10 Jul 2018 11:03:11 +1000 From: "Joe Bloggs" joe@example.com Subject: World domination Content-Language: en Content-Type: text/plain
I have the most brilliant plan. Let me tell you all about it. What we do is, we
The user adds a recipient and converts the message to HTML so they can add formatting, then saves an updated draft:
Jenkins & Newman Standards Track [Page 66] RFC 8621 JMAP Mail August 2019
The server creates the new draft, deletes the old one, and sends the success response:
[[ "Email/set", {
"accountId": "ue150411c",
"oldState": "780839",
"newState": "780842",
"created": {
"k1546": {
"id": "Md45b47b4877521042cec0938",
"blobId": "Ge8de6c9f6de198239b982ea214e0f3a704e4af74",
"threadId": "Td957e72e89f516dc",
"size": 11721
}
},
"destroyed": [ "Mf40b5f831efa7233b9eb1c7f" ],
...
}, "0" ]]
The client moves this draft to a different account. The only way to do this is via the "Email/copy" method. It MUST set a new "mailboxIds" property, since the current value will not be valid Mailbox ids in the destination account:
[[ "Email/copy", {
"fromAccountId": "ue150411c",
"accountId": "u6c6c41ac",
"create": {
"k45": {
"id": "Md45b47b4877521042cec0938",
"mailboxIds": {
"75a4c956": true
}
}
},
"onSuccessDestroyOriginal": true
}, "0" ]]
Jenkins & Newman Standards Track [Page 67] RFC 8621 JMAP Mail August 2019
The server successfully copies the Email and deletes the original. Due to the implicit call to "Email/set", there are two responses to the single method call, both with the same method call id:
[[ "Email/copy", {
"fromAccountId": "ue150411c",
"accountId": "u6c6c41ac",
"oldState": "7ee7e9263a6d",
"newState": "5a0d2447ed26",
"created": {
"k45": {
"id": "M138f9954a5cd2423daeafa55",
"blobId": "G6b9fb047cba722c48c611e79233d057c6b0b74e8",
"threadId": "T2f242ea424a4079a",
"size": 11721
}
},
"notCreated": null
}, "0" ],
[ "Email/set", {
"accountId": "ue150411c",
"oldState": "780842",
"newState": "780871",
"destroyed": [ "Md45b47b4877521042cec0938" ],
...
}, "0" ]]
5. Search Snippets
When doing a search on a "String" property, the client may wish to show the relevant section of the body that matches the search as a preview and to highlight any matching terms in both this and the subject of the Email. Search snippets represent this data.
A *SearchSnippet* object has the following properties:
o emailId: "Id"
The Email id the snippet applies to.
Jenkins & Newman Standards Track [Page 68] RFC 8621 JMAP Mail August 2019
o subject: "String|null"
If text from the filter matches the subject, this is the subject
of the Email with the following transformations:
1. Any instance of the following three characters MUST be
replaced by an appropriate HTML entity: & (ampersand), <
(less-than sign), and > (greater-than sign) [HTML]. Other
characters MAY also be replaced with an HTML entity form.
2. The matching words/phrases from the filter are wrapped in HTML
"<mark></mark>" tags.
If the subject does not match text from the filter, this property
is null.
o preview: "String|null"
If text from the filter matches the plaintext or HTML body, this
is the relevant section of the body (converted to plaintext if
originally HTML), with the same transformations as the "subject"
property. It MUST NOT be bigger than 255 octets in size. If the
body does not contain a match for the text from the filter, this
property is null.
What is a relevant section of the body for preview is server defined. If the server is unable to determine search snippets, it MUST return null for both the "subject" and "preview" properties.
Note that unlike most data types, a SearchSnippet DOES NOT have a property called "id".
The following JMAP method is supported.
5.1. SearchSnippet/get
To fetch search snippets, make a call to "SearchSnippet/get". It takes the following arguments:
o accountId: "Id"
The id of the account to use.
o filter: "FilterOperator|FilterCondition|null"
The same filter as passed to "Email/query"; see the description of
this method in Section 4.4 for details.
Jenkins & Newman Standards Track [Page 69] RFC 8621 JMAP Mail August 2019
o emailIds: "Id[]"
The ids of the Emails to fetch snippets for.
The response has the following arguments:
o accountId: "Id"
The id of the account used for the call.
o list: "SearchSnippet[]"
An array of SearchSnippet objects for the requested Email ids.
This may not be in the same order as the ids that were in the
request.
o notFound: "Id[]|null"
An array of Email ids requested that could not be found, or null
if all ids were found.
As the search snippets are derived from the message content and the algorithm for doing so could change over time, fetching the same snippets a second time MAY return a different result. However, the previous value is not considered incorrect, so there is no state string or update mechanism needed.
The following additional errors may be returned instead of the "SearchSnippet/get" response:
"requestTooLarge": The number of "emailIds" requested by the client exceeds the maximum number the server is willing to process in a single method call.
"unsupportedFilter": The server is unable to process the given "filter" for any reason.
Jenkins & Newman Standards Track [Page 70] RFC 8621 JMAP Mail August 2019
5.2. Example
Here, we did an "Email/query" to search for any Email in the account containing the word "foo"; now, we are fetching the search snippets for some of the ids that were returned in the results:
[[ "SearchSnippet/get", {
"accountId": "ue150411c",
"filter": {
"text": "foo"
},
"emailIds": [
"M44200ec123de277c0c1ce69c",
"M7bcbcb0b58d7729686e83d99",
"M28d12783a0969584b6deaac0",
...
]
}, "0" ]]
Example response:
[[ "SearchSnippet/get", {
"accountId": "ue150411c",
"list": [{
"emailId": "M44200ec123de277c0c1ce69c",
"subject": null,
"preview": null
}, {
"emailId": "M7bcbcb0b58d7729686e83d99",
"subject": "The <mark>Foo</mark>sball competition",
"preview": "...year the <mark>foo</mark>sball competition will
be held in the Stadium de ..."
}, {
"emailId": "M28d12783a0969584b6deaac0",
"subject": null,
"preview": "...the <mark>Foo</mark>/bar method results often
returns <1 widget rather than the complete..."
},
...
],
"notFound": null
}, "0" ]]
Jenkins & Newman Standards Track [Page 71] RFC 8621 JMAP Mail August 2019
6. Identities
An *Identity* object stores information about an email address or domain the user may send from. It has the following properties:
o id: "Id" (immutable; server-set)
The id of the Identity.
o name: "String" (default: "")
The "From" name the client SHOULD use when creating a new Email
from this Identity.
o email: "String" (immutable)
The "From" email address the client MUST use when creating a new
Email from this Identity. If the "mailbox" part of the address
(the section before the "@") is the single character "*" (e.g.,
"*@example.com"), the client may use any valid address ending in
that domain (e.g., "foo@example.com").
o replyTo: "EmailAddress[]|null" (default: null)
The Reply-To value the client SHOULD set when creating a new Email
from this Identity.
o bcc: "EmailAddress[]|null" (default: null)
The Bcc value the client SHOULD set when creating a new Email from
this Identity.
o textSignature: "String" (default: "")
A signature the client SHOULD insert into new plaintext messages
that will be sent from this Identity. Clients MAY ignore this
and/or combine this with a client-specific signature preference.
o htmlSignature: "String" (default: "")
A signature the client SHOULD insert into new HTML messages that
will be sent from this Identity. This text MUST be an HTML
snippet to be inserted into the "<body></body>" section of the
HTML. Clients MAY ignore this and/or combine this with a client-
specific signature preference.
Jenkins & Newman Standards Track [Page 72] RFC 8621 JMAP Mail August 2019
o mayDelete: "Boolean" (server-set)
Is the user allowed to delete this Identity? Servers may wish to
set this to false for the user's username or other default
address. Attempts to destroy an Identity with "mayDelete: false"
will be rejected with a standard "forbidden" SetError.
See the "Addresses" header form description in the Email object (Section 4.1.2.3) for the definition of EmailAddress.
Multiple identities with the same email address MAY exist, to allow for different settings the user wants to pick between (for example, with different names/signatures).
The following JMAP methods are supported.
6.1. Identity/get
This is a standard "/get" method as described in [RFC8620], Section 5.1. The "ids" argument may be null to fetch all at once.
6.2. Identity/changes
This is a standard "/changes" method as described in [RFC8620], Section 5.2.
6.3. Identity/set
This is a standard "/set" method as described in [RFC8620], Section 5.3. The following extra SetError types are defined:
For "create":
o "forbiddenFrom": The user is not allowed to send from the address
given as the "email" property of the Identity.
6.4. Example
Request:
[ "Identity/get", {
"accountId": "acme"
}, "0" ]
Jenkins & Newman Standards Track [Page 73] RFC 8621 JMAP Mail August 2019
with response:
[ "Identity/get", {
"accountId": "acme",
"state": "99401312ae-11-333",
"list": [
{
"id": "XD-3301-222-11_22AAz",
"name": "Joe Bloggs",
"email": "joe@example.com",
"replyTo": null,
"bcc": [{
"name": null,
"email": "joe+archive@example.com"
}],
"textSignature": "-- \nJoe Bloggs\nMaster of Email",
"htmlSignature": "<div><b>Joe Bloggs</b></div>
<div>Master of Email</div>",
"mayDelete": false
},
{
"id": "XD-9911312-11_22AAz",
"name": "Joe B",
"email": "*@example.com",
"replyTo": null,
"bcc": null,
"textSignature": "",
"htmlSignature": "",
"mayDelete": true
}
],
"notFound": []
}, "0" ]
7. Email Submission
An *EmailSubmission* object represents the submission of an Email for delivery to one or more recipients. It has the following properties:
o id: "Id" (immutable; server-set)
The id of the EmailSubmission.
o identityId: "Id" (immutable)
The id of the Identity to associate with this submission.
Jenkins & Newman Standards Track [Page 74] RFC 8621 JMAP Mail August 2019
o emailId: "Id" (immutable)
The id of the Email to send. The Email being sent does not have
to be a draft, for example, when "redirecting" an existing Email
to a different address.
o threadId: "Id" (immutable; server-set)
The Thread id of the Email to send. This is set by the server to
the "threadId" property of the Email referenced by the "emailId".
o envelope: "Envelope|null" (immutable)
Information for use when sending via SMTP. An *Envelope* object
has the following properties:
- mailFrom: "Address"
The email address to use as the return address in the SMTP
submission, plus any parameters to pass with the MAIL FROM
address. The JMAP server MAY allow the address to be the empty
string.
When a JMAP server performs an SMTP message submission, it MAY
use the same id string for the ENVID parameter [RFC3461] and
the EmailSubmission object id. Servers that do this MAY
replace a client-provided value for ENVID with a server-
provided value.
- rcptTo: "Address[]"
The email addresses to send the message to, and any RCPT TO
parameters to pass with the recipient.
An *Address* object has the following properties:
- email: "String"
The email address being represented by the object. This is a
"Mailbox" as used in the Reverse-path or Forward-path of the
MAIL FROM or RCPT TO command in [RFC5321].
- parameters: "Object|null"
Any parameters to send with the email address (either mail-
parameter or rcpt-parameter as appropriate, as specified in
[RFC5321]). If supplied, each key in the object is a parameter
name, and the value is either the parameter value (type
Jenkins & Newman Standards Track [Page 75] RFC 8621 JMAP Mail August 2019
"String") or null if the parameter does not take a value. For
both name and value, any xtext or unitext encodings are removed
(see [RFC3461] and [RFC6533]) and JSON string encoding is
applied.
If the "envelope" property is null or omitted on creation, the
server MUST generate this from the referenced Email as follows:
- "mailFrom": The email address in the Sender header field, if
present; otherwise, it's the email address in the From header
field, if present. In either case, no parameters are added.
If multiple addresses are present in one of these header
fields, or there is more than one Sender/From header field, the
server SHOULD reject the EmailSubmission as invalid; otherwise,
it MUST take the first address in the last Sender/From header
field.
If the address found from this is not allowed by the Identity
associated with this submission, the "email" property from the
Identity MUST be used instead.
- "rcptTo": The deduplicated set of email addresses from the To,
Cc, and Bcc header fields, if present, with no parameters for
any of them.
o sendAt: "UTCDate" (immutable; server-set)
The date the submission was/will be released for delivery. If the
client successfully used FUTURERELEASE [RFC4865] with the
submission, this MUST be the time when the server will release the
message; otherwise, it MUST be the time the EmailSubmission was
created.
o undoStatus: "String"
This represents whether the submission may be canceled. This is
server set on create and MUST be one of the following values:
- "pending": It may be possible to cancel this submission.
- "final": The message has been relayed to at least one recipient
in a manner that cannot be recalled. It is no longer possible
to cancel this submission.
- "canceled": The submission was canceled and will not be
delivered to any recipient.
Jenkins & Newman Standards Track [Page 76] RFC 8621 JMAP Mail August 2019
On systems that do not support unsending, the value of this
property will always be "final". On systems that do support
canceling submission, it will start as "pending" and MAY
transition to "final" when the server knows it definitely cannot
recall the message, but it MAY just remain "pending". If in
pending state, a client can attempt to cancel the submission by
setting this property to "canceled"; if the update succeeds, the
submission was successfully canceled, and the message has not been
delivered to any of the original recipients.
o deliveryStatus: "String[DeliveryStatus]|null" (server-set)
This represents the delivery status for each of the submission's
recipients, if known. This property MAY not be supported by all
servers, in which case it will remain null. Servers that support
it SHOULD update the EmailSubmission object each time the status
of any of the recipients changes, even if some recipients are
still being retried.
This value is a map from the email address of each recipient to a
DeliveryStatus object.
A *DeliveryStatus* object has the following properties:
- smtpReply: "String"
The SMTP reply string returned for this recipient when the
server last tried to relay the message, or in a later Delivery
Status Notification (DSN, as defined in [RFC3464]) response for
the message. This SHOULD be the response to the RCPT TO stage,
unless this was accepted and the message as a whole was
rejected at the end of the DATA stage, in which case the DATA
stage reply SHOULD be used instead.
Multi-line SMTP responses should be concatenated to a single
string as follows:
+ The hyphen following the SMTP code on all but the last line
is replaced with a space.
+ Any prefix in common with the first line is stripped from
lines after the first.
+ CRLF is replaced by a space.
Jenkins & Newman Standards Track [Page 77] RFC 8621 JMAP Mail August 2019
For example:
550-5.7.1 Our system has detected that this message is
550 5.7.1 likely spam.
would become:
550 5.7.1 Our system has detected that this message is likely spam.
For messages relayed via an alternative to SMTP, the server MAY
generate a synthetic string representing the status instead.
If it does this, the string MUST be of the following form:
+ A 3-digit SMTP reply code, as defined in [RFC5321],
Section 4.2.3.
+ Then a single space character.
+ Then an SMTP Enhanced Mail System Status Code as defined in
[RFC3463], with a registry defined in [RFC5248].
+ Then a single space character.
+ Then an implementation-specific information string with a
human-readable explanation of the response.
- delivered: "String"
Represents whether the message has been successfully delivered
to the recipient. This MUST be one of the following values:
+ "queued": The message is in a local mail queue and the
status will change once it exits the local mail queues. The
"smtpReply" property may still change.
+ "yes": The message was successfully delivered to the mail
store of the recipient. The "smtpReply" property is final.
+ "no": Delivery to the recipient permanently failed. The
"smtpReply" property is final.
+ "unknown": The final delivery status is unknown, (e.g., it
was relayed to an external machine and no further
information is available). The "smtpReply" property may
still change if a DSN arrives.
Jenkins & Newman Standards Track [Page 78] RFC 8621 JMAP Mail August 2019
Note that successful relaying to an external SMTP server SHOULD
NOT be taken as an indication that the message has successfully
reached the final mail store. In this case though, the server
may receive a DSN response, if requested.
If a DSN is received for the recipient with Action equal to
"delivered", as per [RFC3464], Section 2.3.3, then the
"delivered" property SHOULD be set to "yes"; if the Action
equals "failed", the property SHOULD be set to "no". Receipt
of any other DSN SHOULD NOT affect this property.
The server MAY also set this property based on other feedback
channels.
- displayed: "String"
Represents whether the message has been displayed to the
recipient. This MUST be one of the following values:
+ "unknown": The display status is unknown. This is the
initial value.
+ "yes": The recipient's system claims the message content has
been displayed to the recipient. Note that there is no
guarantee that the recipient has noticed, read, or
understood the content.
If a Message Disposition Notification (MDN) is received for
this recipient with Disposition-Type (as per [RFC8098],
Section 3.2.6.2) equal to "displayed", this property SHOULD be
set to "yes".
The server MAY also set this property based on other feedback
channels.
o dsnBlobIds: "Id[]" (server-set)
A list of blob ids for DSNs [RFC3464] received for this
submission, in order of receipt, oldest first. The blob is the
whole MIME message (with a top-level content-type of "multipart/
report"), as received.
o mdnBlobIds: "Id[]" (server-set)
A list of blob ids for MDNs [RFC8098] received for this
submission, in order of receipt, oldest first. The blob is the
whole MIME message (with a top-level content-type of "multipart/
report"), as received.
Jenkins & Newman Standards Track [Page 79] RFC 8621 JMAP Mail August 2019
JMAP servers MAY choose not to expose DSN and MDN responses as Email objects if they correlate to an EmailSubmission object. It SHOULD only do this if it exposes them in the "dsnBlobIds" and "mdnblobIds" fields instead, and it expects the user to be using clients capable of fetching and displaying delivery status via the EmailSubmission object.
For efficiency, a server MAY destroy EmailSubmission objects at any time after the message is successfully sent or after it has finished retrying to send the message. For very basic SMTP proxies, this MAY be immediately after creation, as it has no way to assign a real id and return the information again if fetched later.
The following JMAP methods are supported.
7.1. EmailSubmission/get
This is a standard "/get" method as described in [RFC8620], Section 5.1.
7.2. EmailSubmission/changes
This is a standard "/changes" method as described in [RFC8620], Section 5.2.
7.3. EmailSubmission/query
This is a standard "/query" method as described in [RFC8620], Section 5.5.
A *FilterCondition* object has the following properties, any of which may be omitted:
o identityIds: "Id[]"
The EmailSubmission "identityId" property must be in this list to
match the condition.
o emailIds: "Id[]"
The EmailSubmission "emailId" property must be in this list to
match the condition.
o threadIds: "Id[]"
The EmailSubmission "threadId" property must be in this list to
match the condition.
Jenkins & Newman Standards Track [Page 80] RFC 8621 JMAP Mail August 2019
o undoStatus: "String"
The EmailSubmission "undoStatus" property must be identical to the
value given to match the condition.
o before: "UTCDate"
The "sendAt" property of the EmailSubmission object must be before
this date-time to match the condition.
o after: "UTCDate"
The "sendAt" property of the EmailSubmission object must be the
same as or after this date-time to match the condition.
An EmailSubmission object matches the FilterCondition if and only if all of the given conditions match. If zero properties are specified, it is automatically true for all objects.
The following EmailSubmission properties MUST be supported for sorting:
o "emailId"
o "threadId"
o "sentAt"
7.4. EmailSubmission/queryChanges
This is a standard "/queryChanges" method as described in [RFC8620], Section 5.6.
7.5. EmailSubmission/set
This is a standard "/set" method as described in [RFC8620], Section 5.3 with the following two additional request arguments:
o onSuccessUpdateEmail: "Id[PatchObject]|null"
A map of EmailSubmission id to an object containing properties to
update on the Email object referenced by the EmailSubmission if
the create/update/destroy succeeds. (For references to
EmailSubmissions created in the same "/set" invocation, this is
equivalent to a creation-reference, so the id will be the creation
id prefixed with a "#".)
Jenkins & Newman Standards Track [Page 81] RFC 8621 JMAP Mail August 2019
o onSuccessDestroyEmail: "Id[]|null"
A list of EmailSubmission ids for which the Email with the
corresponding "emailId" should be destroyed if the create/update/
destroy succeeds. (For references to EmailSubmission creations,
this is equivalent to a creation-reference, so the id will be the
creation id prefixed with a "#".)
After all create/update/destroy items in the "EmailSubmission/set" invocation have been processed, a single implicit "Email/set" call MUST be made to perform any changes requested in these two arguments. The response to this MUST be returned after the "EmailSubmission/set" response.
An Email is sent by creating an EmailSubmission object. When processing each create, the server must check that the message is valid, and the user has sufficient authorisation to send it. If the creation succeeds, the message will be sent to the recipients given in the envelope "rcptTo" parameter. The server MUST remove any Bcc header field present on the message during delivery. The server MAY add or remove other header fields from the submitted message or make further alterations in accordance with the server's policy during delivery.
If the referenced Email is destroyed at any point after the EmailSubmission object is created, this MUST NOT change the behaviour of the submission (i.e., it does not cancel a future send). The "emailId" and "threadId" properties of the EmailSubmission object remain, but trying to fetch them (with a standard "Email/get" call) will return a "notFound" error if the corresponding objects have been destroyed.
Similarly, destroying an EmailSubmission object MUST NOT affect the deliveries it represents. It purely removes the record of the submission. The server MAY automatically destroy EmailSubmission objects after some time or in response to other triggers, and MAY forbid the client from manually destroying EmailSubmission objects.
If the message to be sent is larger than the server supports sending, a standard "tooLarge" SetError MUST be returned. A "maxSize" "UnsignedInt" property MUST be present on the SetError specifying the maximum size of a message that may be sent, in octets.
If the Email or Identity id given cannot be found, the submission creation is rejected with a standard "invalidProperties" SetError.
Jenkins & Newman Standards Track [Page 82] RFC 8621 JMAP Mail August 2019
The following extra SetError types are defined:
For "create":
o "invalidEmail" - The Email to be sent is invalid in some way. The
SetError SHOULD contain a property called "properties" of type
"String[]" that lists *all* the properties of the Email that were
invalid.
o "tooManyRecipients" - The envelope (supplied or generated) has
more recipients than the server allows. A "maxRecipients"
"UnsignedInt" property MUST also be present on the SetError
specifying the maximum number of allowed recipients.
o "noRecipients" - The envelope (supplied or generated) does not
have any rcptTo email addresses.
o "invalidRecipients" - The "rcptTo" property of the envelope
(supplied or generated) contains at least one rcptTo value, which
is not a valid email address for sending to. An
"invalidRecipients" "String[]" property MUST also be present on
the SetError, which is a list of the invalid addresses.
o "forbiddenMailFrom" - The server does not permit the user to send
a message with the envelope From address [RFC5321].
o "forbiddenFrom" - The server does not permit the user to send a
message with the From header field [RFC5322] of the message to be
sent.
o "forbiddenToSend" - The user does not have permission to send at
all right now for some reason. A "description" "String" property
MAY be present on the SetError object to display to the user why
they are not permitted.
For "update":
o "cannotUnsend" - The client attempted to update the "undoStatus"
of a valid EmailSubmission object from "pending" to "canceled",
but the message cannot be unsent.
Jenkins & Newman Standards Track [Page 83] RFC 8621 JMAP Mail August 2019
7.5.1. Example
The following example presumes a draft of the Email to be sent has already been saved, and its Email id is "M7f6ed5bcfd7e2604d1753f6c". This call then sends the Email immediately, and if successful, removes the "$draft" flag and moves it from the drafts folder (which has Mailbox id "7cb4e8ee-df87-4757-b9c4-2ea1ca41b38e") to the sent folder (which we presume has Mailbox id "73dbcb4b-bffc-48bd-8c2a- a2e91ca672f6").
[[ "EmailSubmission/set", {
"accountId": "ue411d190",
"create": {
"k1490": {
"identityId": "I64588216",
"emailId": "M7f6ed5bcfd7e2604d1753f6c",
"envelope": {
"mailFrom": {
"email": "john@example.com",
"parameters": null
},
"rcptTo": [{
"email": "jane@example.com",
"parameters": null
},
...
]
}
}
},
"onSuccessUpdateEmail": {
"#k1490": {
"mailboxIds/7cb4e8ee-df87-4757-b9c4-2ea1ca41b38e": null,
"mailboxIds/73dbcb4b-bffc-48bd-8c2a-a2e91ca672f6": true,
"keywords/$draft": null
}
}
}, "0" ]]
Jenkins & Newman Standards Track [Page 84] RFC 8621 JMAP Mail August 2019
A successful response might look like this. Note that there are two responses due to the implicit "Email/set" call, but both have the same method call id as they are due to the same call in the request:
[[ "EmailSubmission/set", {
"accountId": "ue411d190",
"oldState": "012421s6-8nrq-4ps4-n0p4-9330r951ns21",
"newState": "355421f6-8aed-4cf4-a0c4-7377e951af36",
"created": {
"k1490": {
"id": "ES-3bab7f9a-623e-4acf-99a5-2e67facb02a0"
}
}
}, "0" ],
[ "Email/set", {
"accountId": "ue411d190",
"oldState": "778193",
"newState": "778197",
"updated": {
"M7f6ed5bcfd7e2604d1753f6c": null
}
}, "0" ]]
Suppose instead an admin has removed sending rights for the user, so the submission is rejected with a "forbiddenToSend" error. The description argument of the error is intended for display to the user, so it should be localised appropriately. Let's suppose the request was sent with an Accept-Language header like this:
Accept-Language: de;q=0.9,en;q=0.8
Jenkins & Newman Standards Track [Page 85] RFC 8621 JMAP Mail August 2019
The server should attempt to choose the best localisation from those
it has available based on the Accept-Language header, as described in
[RFC8620], Section 3.8. If the server has English, French, and
German translations, it would choose German as the preferred language
and return a response like this:
8. Vacation Response
A vacation response sends an automatic reply when a message is delivered to the mail store, informing the original sender that their message may not be read for some time.
Automated message sending can produce undesirable behaviour. To avoid this, implementors MUST follow the recommendations set forth in [RFC3834].
The *VacationResponse* object represents the state of vacation- response-related settings for an account. It has the following properties:
o id: "Id" (immutable; server-set)
The id of the object. There is only ever one VacationResponse
object, and its id is "singleton".
o isEnabled: "Boolean"
Should a vacation response be sent if a message arrives between
the "fromDate" and "toDate"?
Jenkins & Newman Standards Track [Page 86] RFC 8621 JMAP Mail August 2019
o fromDate: "UTCDate|null"
If "isEnabled" is true, messages that arrive on or after this
date-time (but before the "toDate" if defined) should receive the
user's vacation response. If null, the vacation response is
effective immediately.
o toDate: "UTCDate|null"
If "isEnabled" is true, messages that arrive before this date-time
(but on or after the "fromDate" if defined) should receive the
user's vacation response. If null, the vacation response is
effective indefinitely.
o subject: "String|null"
The subject that will be used by the message sent in response to
messages when the vacation response is enabled. If null, an
appropriate subject SHOULD be set by the server.
o textBody: "String|null"
The plaintext body to send in response to messages when the
vacation response is enabled. If this is null, the server SHOULD
generate a plaintext body part from the "htmlBody" when sending
vacation responses but MAY choose to send the response as HTML
only. If both "textBody" and "htmlBody" are null, an appropriate
default body SHOULD be generated for responses by the server.
o htmlBody: "String|null"
The HTML body to send in response to messages when the vacation
response is enabled. If this is null, the server MAY choose to
generate an HTML body part from the "textBody" when sending
vacation responses or MAY choose to send the response as plaintext
only.
The following JMAP methods are supported.
8.1. VacationResponse/get
This is a standard "/get" method as described in [RFC8620], Section 5.1.
There MUST only be exactly one VacationResponse object in an account. It MUST have the id "singleton".
Jenkins & Newman Standards Track [Page 87] RFC 8621 JMAP Mail August 2019
8.2. VacationResponse/set
This is a standard "/set" method as described in [RFC8620], Section 5.3.
9. Security Considerations
All security considerations of JMAP [RFC8620] apply to this specification. Additional considerations specific to the data types and functionality introduced by this document are described in the following subsections.
9.1. EmailBodyPart Value
Service providers typically perform security filtering on incoming messages, and it's important that the detection of content-type and charset for the security filter aligns with the heuristics performed by JMAP servers. Servers that apply heuristics to determine the content-type or charset for an EmailBodyValue SHOULD document the heuristics and provide a mechanism to turn them off in the event they are misaligned with the security filter used at a particular mail host.
Automatic conversion of charsets that allow hidden channels for ASCII text, such as UTF-7, have been problematic for security filters in the past, so server implementations can mitigate this risk by having such conversions off-by-default and/or separately configurable.
To allow the client to restrict the volume of data it can receive in response to a request, a maximum length may be requested for the data returned for a textual body part. However, truncating the data may change the semantic meaning, for example, truncating a URL changes its location. Servers that scan for links to malicious sites should take care to either ensure truncation is not at a semantically significant point or rescan the truncated value for malicious content before returning it.
9.2. HTML Email Display
HTML message bodies provide richer formatting for messages but present a number of security challenges, especially when embedded in a webmail context in combination with interface HTML. Clients that render HTML messages should carefully consider the potential risks, including:
Jenkins & Newman Standards Track [Page 88] RFC 8621 JMAP Mail August 2019
o Embedded JavaScript can rewrite the message to change its content
on subsequent opening, allowing users to be mislead. In webmail
systems, if run in the same origin as the interface, it can access
and exfiltrate all private data accessible to the user, including
all other messages and potentially contacts, calendar events,
settings, and credentials. It can also rewrite the interface to
undetectably phish passwords. A compromise is likely to be
persistent, not just for the duration of page load, due to
exfiltration of session credentials or installation of a service
worker that can intercept all subsequent network requests
(however, this would only be possible if blob downloads are also
available on the same origin, and the service worker script is
attached to the message).
o HTML documents may load content directly from the Internet rather
than just referencing attached resources. For example, you may
have an "<img>" tag with an external "src" attribute. This may
leak to the sender when a message is opened, as well as the IP
address of the recipient. Cookies may also be sent and set by the
server, allowing tracking between different messages and even
website visits and advertising profiles.
o In webmail systems, CSS can break the layout or create phishing
vulnerabilities. For example, the use of "position:fixed" can
allow a message to draw content outside of its normal bounds,
potentially clickjacking a real interface element.
o If in a webmail context and not inside a separate frame, any
styles defined in CSS rules will apply to interface elements as
well if the selector matches, allowing the interface to be
modified. Similarly, any interface styles that match elements in
the message will alter their appearance, potentially breaking the
layout of the message.
o The link text in HTML has no necessary correlation with the actual
target of the link, which can be used to make phishing attacks
more convincing.
o Links opened from a message or embedded external content may leak
private info in the Referer header sent by default in most
systems.
o Forms can be used to mimic login boxes, providing a potent
phishing vector if allowed to submit directly from the message
display.
Jenkins & Newman Standards Track [Page 89] RFC 8621 JMAP Mail August 2019
There are a number of ways clients can mitigate these issues, and a defence-in-depth approach that uses a combination of techniques will provide the strongest security.
o HTML can be filtered before rendering, stripping potentially
malicious content. Sanitising HTML correctly is tricky, and
implementors are strongly recommended to use a well-tested library
with a carefully vetted whitelist-only approach. New features
with unexpected security characteristics may be added to HTML
rendering engines in the future; a blacklist approach is likely to
result in security issues.
Subtle differences in parsing of HTML can introduce security
flaws: to filter with 100% accuracy, you need to use the same
parser that the HTML rendering engine will use.
o Encapsulating the message in an "<iframe sandbox>", as defined in
[HTML], Section 4.7.6, can help mitigate a number of risks. This
will:
- Disable JavaScript.
- Disable form submission.
- Prevent drawing outside of its bounds or conflicts between
message CSS and interface CSS.
- Establish a unique anonymous origin, separate to the containing
origin.
o A strong Content Security Policy (see <https://www.w3.org/TR/
CSP3/>) can, among other things, block JavaScript and the loading
of external content should it manage to evade the filter.
o The leakage of information in the Referer header can be mitigated
with the use of a referrer policy (see <https://www.w3.org/TR/
referrer-policy/>).
o A "crossorigin=anonymous" attribute on tags that load remote
content can prevent cookies from being sent.
o If adding "target=_blank" to open links in new tabs, also add
"rel=noopener" to ensure the page that opens cannot change the URL
in the original tab to redirect the user to a phishing site.
As highly complex software components, HTML rendering engines increase the attack surface of a client considerably, especially when being used to process untrusted, potentially malicious content.
Jenkins & Newman Standards Track [Page 90] RFC 8621 JMAP Mail August 2019
Serious bugs have been found in image decoders, JavaScript engines, and HTML parsers in the past, which could lead to full system compromise. Clients using an engine should ensure they get the latest version and continue to incorporate any security patches released by the vendor.
9.3. Multiple Part Display
Messages may consist of multiple parts to be displayed sequentially as a body. Clients MUST render each part in isolation and MUST NOT concatenate the raw text values to render. Doing so may change the overall semantics of the message. If the client or server is decrypting a Pretty Good Privacy (PGP) or S/MIME encrypted part, concatenating with other parts may leak the decrypted text to an attacker, as described in [EFAIL].
9.4. Email Submission
SMTP submission servers [RFC6409] use a number of mechanisms to mitigate damage caused by compromised user accounts and end-user systems including rate limiting, anti-virus/anti-spam milters (mail filters), and other technologies. The technologies work better when they have more information about the client connection. If JMAP email submission is implemented as a proxy to an SMTP submission server, it is useful to communicate this information from the JMAP proxy to the submission server. The de facto XCLIENT extension to SMTP [XCLIENT] can be used to do this, but use of an authenticated channel is recommended to limit use of that extension to explicitly authorised proxies.
JMAP servers that proxy to an SMTP submission server SHOULD allow use of the submissions port [RFC8314]. Implementation of a mechanism similar to SMTP XCLIENT is strongly encouraged. While Simple Authentication and Security Layer (SASL) PLAIN over TLS [RFC4616] is presently the mandatory-to-implement mechanism for interoperability with SMTP submission servers [RFC4954], a JMAP submission proxy SHOULD implement and prefer a stronger mechanism for this use case such as TLS client certificate authentication with SASL EXTERNAL ([RFC4422], Appendix A) or Salted Challenge Response Authentication Mechanism (SCRAM) [RFC7677].
In the event the JMAP server directly relays mail to SMTP servers in other administrative domains, implementation of the de facto [milter] protocol is strongly encouraged to integrate with third-party products that address security issues including anti-virus/anti-spam, reputation protection, compliance archiving, and data loss prevention. Proxying to a local SMTP submission server may be a simpler way to provide such security services.
Jenkins & Newman Standards Track [Page 91] RFC 8621 JMAP Mail August 2019
9.5. Partial Account Access
A user may only have permission to access a subset of the data that exists in an account. To avoid leaking unauthorised information, in such a situation, the server MUST treat any data the user does not have permission to access the same as if it did not exist.
For example, suppose user A has an account with two Mailboxes, inbox and sent, but only shares the inbox with user B. In this case, when user B fetches Mailboxes for this account, the server MUST behave as though the sent Mailbox did not exist. Similarly, when querying or fetching Email objects, it MUST treat any messages that just belong to the sent Mailbox as though they did not exist. Fetching Thread objects MUST only return ids for Email objects the user has permission to access; if none, the Thread again MUST be treated the same as if it did not exist.
If the server forbids a single account from having two identical messages, or two messages with the same Message-Id header field, a user with write access can use the error returned by trying to create/import such a message to detect whether it already exists in an inaccessible portion of the account.
9.6. Permission to Send from an Address
In recent years, the email ecosystem has moved towards associating
trust with the From address in the message [RFC5322], particularly
with schemes such as Domain-based Message Authentication, Reporting,
and Conformance (DMARC) [RFC7489].
The set of Identity objects (see Section 6) in an account lets the client know which email addresses the user has permission to send from. Each email submission is associated with an Identity, and servers SHOULD reject submissions where the From header field of the message does not correspond to the associated Identity.
The server MAY allow an exception to send an exact copy of an existing message received into the mail store to another address (otherwise known as "redirecting" or "bouncing"), although it is RECOMMENDED the server limit this to destinations the user has verified they also control.
If the user attempts to create a new Identity object, the server MUST reject it with the appropriate error if the user does not have permission to use that email address to send from.
Jenkins & Newman Standards Track [Page 92] RFC 8621 JMAP Mail August 2019
The SMTP MAIL FROM address [RFC5321] is often confused with the From message header field [RFC5322]. The user generally only ever sees the address in the message header field, and this is the primary one to enforce. However, the server MUST also enforce appropriate restrictions on the MAIL FROM address [RFC5321] to stop the user from flooding a third-party address with bounces and non-delivery notices.
The JMAP submission model provides separate errors for impermissible addresses in either context.
10. IANA Considerations
10.1. JMAP Capability Registration for "mail"
IANA has registered the "mail" JMAP Capability as follows:
Capability Name: urn:ietf:params:jmap:mail
Specification document: this document
Intended use: common
Change Controller: IETF
Security and privacy considerations: this document, Section 9
10.2. JMAP Capability Registration for "submission"
IANA has registered the "submission" JMAP Capability as follows:
Capability Name: urn:ietf:params:jmap:submission
Specification document: this document
Intended use: common
Change Controller: IETF
Security and privacy considerations: this document, Section 9
Jenkins & Newman Standards Track [Page 93] RFC 8621 JMAP Mail August 2019
10.3. JMAP Capability Registration for "vacationresponse"
IANA has registered the "vacationresponse" JMAP Capability as follows:
Capability Name: urn:ietf:params:jmap:vacationresponse
Specification document: this document
Intended use: common
Change Controller: IETF
Security and privacy considerations: this document, Section 9
10.4. IMAP and JMAP Keywords Registry
This document makes two changes to the IMAP keywords registry as defined in [RFC5788].
First, the name of the registry is changed to the "IMAP and JMAP Keywords" registry.
Second, a scope column is added to the template and registry indicating whether a keyword applies to "IMAP-only", "JMAP-only", "both", or "reserved". All keywords already in the IMAP keyword registry have been marked with a scope of "both". The "reserved" status can be used to prevent future registration of a name that would be confusing if registered. Registration of keywords with scope "reserved" omit most fields in the registration template (see registration of "$recent" below for an example); such registrations are intended to be infrequent.
IMAP clients MAY silently ignore any keywords marked "JMAP-only" or "reserved" in the event they appear in protocol. JMAP clients MAY silently ignore any keywords marked "IMAP-only" or "reserved" in the event they appear in protocol.
New "JMAP-only" keywords are registered in the following subsections. These keywords correspond to IMAP system keywords and are thus not appropriate for use in IMAP. These keywords cannot be subsequently registered for use in IMAP except via standards action.
Jenkins & Newman Standards Track [Page 94] RFC 8621 JMAP Mail August 2019
10.4.1. Registration of JMAP Keyword "$draft"
This registers the "JMAP-only" keyword "$draft" in the "IMAP and JMAP Keywords" registry.
Keyword name: $draft
Scope: JMAP-only
Purpose (description): This is set when the user wants to treat the message as a draft the user is composing. This is the JMAP equivalent of the IMAP \Draft flag.
Private or Shared on a server: BOTH
Is it an advisory keyword or may it cause an automatic action: Automatic. If the account has an IMAP mailbox marked with the \Drafts special use attribute [RFC6154], setting this flag MAY cause the message to appear in that mailbox automatically. Certain JMAP computed values such as "unreadEmails" will change as a result of changing this flag. In addition, mail clients will typically present draft messages in a composer window rather than a viewer window.
When/by whom the keyword is set/cleared: This is typically set by a JMAP client when referring to a draft message. One model for draft Emails would result in clearing this flag in an "EmailSubmission/set" operation with an "onSuccessUpdateEmail" argument. In a mail store shared by JMAP and IMAP, this is also set and cleared as necessary so it matches the IMAP \Draft flag.
Related keywords: None
Related IMAP/JMAP Capabilities: SPECIAL-USE [RFC6154]
Security Considerations: A server implementing this keyword as a shared keyword may disclose that a user considers the message a draft message. This information would be exposed to other users with read permission for the Mailbox keywords.
Published specification: this document
Person & email address to contact for further information: JMAP mailing list <jmap@ietf.org>
Intended usage: COMMON
Owner/Change controller: IESG
Jenkins & Newman Standards Track [Page 95] RFC 8621 JMAP Mail August 2019
10.4.2. Registration of JMAP Keyword "$seen"
This registers the "JMAP-only" keyword "$seen" in the "IMAP and JMAP Keywords" registry.
Keyword name: $seen
Scope: JMAP-only
Purpose (description): This is set when the user wants to treat the message as read. This is the JMAP equivalent of the IMAP \Seen flag.
Private or Shared on a server: BOTH
Is it an advisory keyword or may it cause an automatic action: Advisory. However, certain JMAP computed values such as "unreadEmails" will change as a result of changing this flag.
When/by whom the keyword is set/cleared: This is set by a JMAP client when it presents the message content to the user; clients often offer an option to clear this flag. In a mail store shared by JMAP and IMAP, this is also set and cleared as necessary so it matches the IMAP \Seen flag.
Related keywords: None
Related IMAP/JMAP Capabilities: None
Security Considerations: A server implementing this keyword as a shared keyword may disclose that a user considers the message to have been read. This information would be exposed to other users with read permission for the Mailbox keywords.
Published specification: this document
Person & email address to contact for further information: JMAP mailing list <jmap@ietf.org>
Intended usage: COMMON
Owner/Change controller: IESG
Jenkins & Newman Standards Track [Page 96] RFC 8621 JMAP Mail August 2019
10.4.3. Registration of JMAP Keyword "$flagged"
This registers the "JMAP-only" keyword "$flagged" in the "IMAP and JMAP Keywords" registry.
Keyword name: $flagged
Scope: JMAP-only
Purpose (description): This is set when the user wants to treat the message as flagged for urgent/special attention. This is the JMAP equivalent of the IMAP \Flagged flag.
Private or Shared on a server: BOTH
Is it an advisory keyword or may it cause an automatic action: Automatic. If the account has an IMAP mailbox marked with the \Flagged special use attribute [RFC6154], setting this flag MAY cause the message to appear in that mailbox automatically.
When/by whom the keyword is set/cleared: JMAP clients typically allow a user to set/clear this flag as desired. In a mail store shared by JMAP and IMAP, this is also set and cleared as necessary so it matches the IMAP \Flagged flag.
Related keywords: None
Related IMAP/JMAP Capabilities: SPECIAL-USE [RFC6154]
Security Considerations: A server implementing this keyword as a shared keyword may disclose that a user considers the message as flagged for urgent/special attention. This information would be exposed to other users with read permission for the Mailbox keywords.
Published specification: this document
Person & email address to contact for further information: JMAP mailing list <jmap@ietf.org>
Intended usage: COMMON
Owner/Change controller: IESG
Jenkins & Newman Standards Track [Page 97] RFC 8621 JMAP Mail August 2019
10.4.4. Registration of JMAP Keyword "$answered"
This registers the "JMAP-only" keyword "$answered" in the "IMAP and JMAP Keywords" registry.
Keyword name: $answered
Scope: JMAP-only
Purpose (description): This is set when the message has been answered.
Private or Shared on a server: BOTH
Is it an advisory keyword or may it cause an automatic action: Advisory.
When/by whom the keyword is set/cleared: JMAP clients typically set this when submitting a reply or answer to the message. It may be set by the "EmailSubmission/set" operation with an "onSuccessUpdateEmail" argument. In a mail store shared by JMAP and IMAP, this is also set and cleared as necessary so it matches the IMAP \Answered flag.
Related keywords: None
Related IMAP/JMAP Capabilities: None
Security Considerations: A server implementing this keyword as a shared keyword may disclose that a user has replied to a message. This information would be exposed to other users with read permission for the Mailbox keywords.
Published specification: this document
Person & email address to contact for further information: JMAP mailing list <jmap@ietf.org>
Intended usage: COMMON
Owner/Change controller: IESG
Jenkins & Newman Standards Track [Page 98] RFC 8621 JMAP Mail August 2019
10.4.5. Registration of "$recent" Keyword
This registers the keyword "$recent" in the "IMAP and JMAP Keywords" registry.
Keyword name: $recent
Scope: reserved
Purpose (description): This keyword is not used to avoid confusion with the IMAP \Recent system flag.
Published specification: this document
Person & email address to contact for further information: JMAP mailing list <jmap@ietf.org>
Owner/Change controller: IESG
10.5. IMAP Mailbox Name Attributes Registry
10.5.1. Registration of "inbox" Role
This registers the "JMAP-only" "inbox" attribute in the "IMAP Mailbox Name Attributes" registry, as established in [RFC8457].
Attribute Name: Inbox
Description: New mail is delivered here by default.
Reference: This document, Section 10.5.1
Usage Notes: JMAP only
Jenkins & Newman Standards Track [Page 99] RFC 8621 JMAP Mail August 2019
10.6. JMAP Error Codes Registry
The following subsections register several new error codes in the "JMAP Error Codes" registry, as defined in [RFC8620].
10.6.1. mailboxHasChild
JMAP Error Code: mailboxHasChild
Intended use: common
Change controller: IETF
Reference: This document, Section 2.5
Description: The Mailbox still has at least one child Mailbox. The client MUST remove these before it can delete the parent Mailbox.
10.6.2. mailboxHasEmail
JMAP Error Code: mailboxHasEmail
Intended use: common
Change controller: IETF
Reference: This document, Section 2.5
Description: The Mailbox has at least one message assigned to it, and the onDestroyRemoveEmails argument was false.
10.6.3. blobNotFound
JMAP Error Code: blobNotFound
Intended use: common
Change controller: IETF
Reference: This document, Section 4.6
Description: At least one blob id referenced in the object doesn't exist.
Jenkins & Newman Standards Track [Page 100] RFC 8621 JMAP Mail August 2019
10.6.4. tooManyKeywords
JMAP Error Code: tooManyKeywords
Intended use: common
Change controller: IETF
Reference: This document, Section 4.6
Description: The change to the Email's keywords would exceed a server-defined maximum.
10.6.5. tooManyMailboxes
JMAP Error Code: tooManyMailboxes
Intended use: common
Change controller: IETF
Reference: This document, Section 4.6
Description: The change to the set of Mailboxes that this Email is in would exceed a server-defined maximum.
10.6.6. invalidEmail
JMAP Error Code: invalidEmail
Intended use: common
Change controller: IETF
Reference: This document, Section 7.5
Description: The Email to be sent is invalid in some way.
Jenkins & Newman Standards Track [Page 101] RFC 8621 JMAP Mail August 2019
10.6.7. tooManyRecipients
JMAP Error Code: tooManyRecipients
Intended use: common
Change controller: IETF
Reference: This document, Section 7.5
Description: The envelope [RFC5321] (supplied or generated) has more recipients than the server allows.
10.6.8. noRecipients
JMAP Error Code: noRecipients
Intended use: common
Change controller: IETF
Reference: This document, Section 7.5
Description: The envelope [RFC5321] (supplied or generated) does not have any rcptTo email addresses.
10.6.9. invalidRecipients
JMAP Error Code: invalidRecipients
Intended use: common
Change controller: IETF
Reference: This document, Section 7.5
Description: The rcptTo property of the envelope [RFC5321] (supplied or generated) contains at least one rcptTo value that is not a valid email address for sending to.
Jenkins & Newman Standards Track [Page 102] RFC 8621 JMAP Mail August 2019
10.6.10. forbiddenMailFrom
JMAP Error Code: forbiddenMailFrom
Intended use: common
Change controller: IETF
Reference: This document, Section 7.5
Description: The server does not permit the user to send a message with this envelope From address [RFC5321].
10.6.11. forbiddenFrom
JMAP Error Code: forbiddenFrom
Intended use: common
Change controller: IETF
Reference: This document, Sections 6.3 and 7.5
Description: The server does not permit the user to send a message with the From header field [RFC5322] of the message to be sent.
10.6.12. forbiddenToSend
JMAP Error Code: forbiddenToSend
Intended use: common
Change controller: IETF
Reference: This document, Section 7.5
Description: The user does not have permission to send at all right now.
Jenkins & Newman Standards Track [Page 103] RFC 8621 JMAP Mail August 2019
11. References
11.1. Normative References
[HTML] Faulkner, S., Eicholz, A., Leithead, T., Danilo, A., and
S. Moon, "HTML 5.2", World Wide Web Consortium
Recommendation REC-html52-20171214, December 2017,
<https://www.w3.org/TR/html52/>.
[RFC1870] Klensin, J., Freed, N., and K. Moore, "SMTP Service
Extension for Message Size Declaration", STD 10, RFC 1870,
DOI 10.17487/RFC1870, November 1995,
<https://www.rfc-editor.org/info/rfc1870>.
[RFC2045] Freed, N. and N. Borenstein, "Multipurpose Internet Mail
Extensions (MIME) Part One: Format of Internet Message
Bodies", RFC 2045, DOI 10.17487/RFC2045, November 1996,
<https://www.rfc-editor.org/info/rfc2045>.
[RFC2047] Moore, K., "MIME (Multipurpose Internet Mail Extensions)
Part Three: Message Header Extensions for Non-ASCII Text",
RFC 2047, DOI 10.17487/RFC2047, November 1996,
<https://www.rfc-editor.org/info/rfc2047>.
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119,
DOI 10.17487/RFC2119, March 1997,
<https://www.rfc-editor.org/info/rfc2119>.
[RFC2231] Freed, N. and K. Moore, "MIME Parameter Value and Encoded
Word Extensions: Character Sets, Languages, and
Continuations", RFC 2231, DOI 10.17487/RFC2231, November
1997, <https://www.rfc-editor.org/info/rfc2231>.
[RFC2369] Neufeld, G. and J. Baer, "The Use of URLs as Meta-Syntax
for Core Mail List Commands and their Transport through
Message Header Fields", RFC 2369, DOI 10.17487/RFC2369,
July 1998, <https://www.rfc-editor.org/info/rfc2369>.
[RFC2392] Levinson, E., "Content-ID and Message-ID Uniform Resource
Locators", RFC 2392, DOI 10.17487/RFC2392, August 1998,
<https://www.rfc-editor.org/info/rfc2392>.
[RFC2557] Palme, J., Hopmann, A., and N. Shelness, "MIME
Encapsulation of Aggregate Documents, such as HTML
(MHTML)", RFC 2557, DOI 10.17487/RFC2557, March 1999,
<https://www.rfc-editor.org/info/rfc2557>.
Jenkins & Newman Standards Track [Page 104] RFC 8621 JMAP Mail August 2019
[RFC2852] Newman, D., "Deliver By SMTP Service Extension", RFC 2852,
DOI 10.17487/RFC2852, June 2000,
<https://www.rfc-editor.org/info/rfc2852>.
[RFC3282] Alvestrand, H., "Content Language Headers", RFC 3282,
DOI 10.17487/RFC3282, May 2002,
<https://www.rfc-editor.org/info/rfc3282>.
[RFC3461] Moore, K., "Simple Mail Transfer Protocol (SMTP) Service
Extension for Delivery Status Notifications (DSNs)",
RFC 3461, DOI 10.17487/RFC3461, January 2003,
<https://www.rfc-editor.org/info/rfc3461>.
[RFC3463] Vaudreuil, G., "Enhanced Mail System Status Codes",
RFC 3463, DOI 10.17487/RFC3463, January 2003,
<https://www.rfc-editor.org/info/rfc3463>.
[RFC3464] Moore, K. and G. Vaudreuil, "An Extensible Message Format
for Delivery Status Notifications", RFC 3464,
DOI 10.17487/RFC3464, January 2003,
<https://www.rfc-editor.org/info/rfc3464>.
[RFC3834] Moore, K., "Recommendations for Automatic Responses to
Electronic Mail", RFC 3834, DOI 10.17487/RFC3834, August
2004, <https://www.rfc-editor.org/info/rfc3834>.
[RFC4314] Melnikov, A., "IMAP4 Access Control List (ACL) Extension",
RFC 4314, DOI 10.17487/RFC4314, December 2005,
<https://www.rfc-editor.org/info/rfc4314>.
[RFC4422] Melnikov, A., Ed. and K. Zeilenga, Ed., "Simple
Authentication and Security Layer (SASL)", RFC 4422,
DOI 10.17487/RFC4422, June 2006,
<https://www.rfc-editor.org/info/rfc4422>.
[RFC4616] Zeilenga, K., Ed., "The PLAIN Simple Authentication and
Security Layer (SASL) Mechanism", RFC 4616,
DOI 10.17487/RFC4616, August 2006,
<https://www.rfc-editor.org/info/rfc4616>.
[RFC4865] White, G. and G. Vaudreuil, "SMTP Submission Service
Extension for Future Message Release", RFC 4865,
DOI 10.17487/RFC4865, May 2007,
<https://www.rfc-editor.org/info/rfc4865>.
Jenkins & Newman Standards Track [Page 105] RFC 8621 JMAP Mail August 2019
[RFC4954] Siemborski, R., Ed. and A. Melnikov, Ed., "SMTP Service
Extension for Authentication", RFC 4954,
DOI 10.17487/RFC4954, July 2007,
<https://www.rfc-editor.org/info/rfc4954>.
[RFC5198] Klensin, J. and M. Padlipsky, "Unicode Format for Network
Interchange", RFC 5198, DOI 10.17487/RFC5198, March 2008,
<https://www.rfc-editor.org/info/rfc5198>.
[RFC5248] Hansen, T. and J. Klensin, "A Registry for SMTP Enhanced
Mail System Status Codes", BCP 138, RFC 5248,
DOI 10.17487/RFC5248, June 2008,
<https://www.rfc-editor.org/info/rfc5248>.
[RFC5256] Crispin, M. and K. Murchison, "Internet Message Access
Protocol - SORT and THREAD Extensions", RFC 5256,
DOI 10.17487/RFC5256, June 2008,
<https://www.rfc-editor.org/info/rfc5256>.
[RFC5321] Klensin, J., "Simple Mail Transfer Protocol", RFC 5321,
DOI 10.17487/RFC5321, October 2008,
<https://www.rfc-editor.org/info/rfc5321>.
[RFC5322] Resnick, P., Ed., "Internet Message Format", RFC 5322,
DOI 10.17487/RFC5322, October 2008,
<https://www.rfc-editor.org/info/rfc5322>.
[RFC5788] Melnikov, A. and D. Cridland, "IMAP4 Keyword Registry",
RFC 5788, DOI 10.17487/RFC5788, March 2010,
<https://www.rfc-editor.org/info/rfc5788>.
[RFC6154] Leiba, B. and J. Nicolson, "IMAP LIST Extension for
Special-Use Mailboxes", RFC 6154, DOI 10.17487/RFC6154,
March 2011, <https://www.rfc-editor.org/info/rfc6154>.
[RFC6409] Gellens, R. and J. Klensin, "Message Submission for Mail",
STD 72, RFC 6409, DOI 10.17487/RFC6409, November 2011,
<https://www.rfc-editor.org/info/rfc6409>.
[RFC6532] Yang, A., Steele, S., and N. Freed, "Internationalized
Email Headers", RFC 6532, DOI 10.17487/RFC6532, February
2012, <https://www.rfc-editor.org/info/rfc6532>.
[RFC6533] Hansen, T., Ed., Newman, C., and A. Melnikov,
"Internationalized Delivery Status and Disposition
Notifications", RFC 6533, DOI 10.17487/RFC6533, February
2012, <https://www.rfc-editor.org/info/rfc6533>.
Jenkins & Newman Standards Track [Page 106] RFC 8621 JMAP Mail August 2019
[RFC6710] Melnikov, A. and K. Carlberg, "Simple Mail Transfer
Protocol Extension for Message Transfer Priorities",
RFC 6710, DOI 10.17487/RFC6710, August 2012,
<https://www.rfc-editor.org/info/rfc6710>.
[RFC7677] Hansen, T., "SCRAM-SHA-256 and SCRAM-SHA-256-PLUS Simple
Authentication and Security Layer (SASL) Mechanisms",
RFC 7677, DOI 10.17487/RFC7677, November 2015,
<https://www.rfc-editor.org/info/rfc7677>.
[RFC8098] Hansen, T., Ed. and A. Melnikov, Ed., "Message Disposition
Notification", STD 85, RFC 8098, DOI 10.17487/RFC8098,
February 2017, <https://www.rfc-editor.org/info/rfc8098>.
[RFC8174] Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC
2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174,
May 2017, <https://www.rfc-editor.org/info/rfc8174>.
[RFC8314] Moore, K. and C. Newman, "Cleartext Considered Obsolete:
Use of Transport Layer Security (TLS) for Email Submission
and Access", RFC 8314, DOI 10.17487/RFC8314, January 2018,
<https://www.rfc-editor.org/info/rfc8314>.
[RFC8457] Leiba, B., Ed., "IMAP "$Important" Keyword and
"\Important" Special-Use Attribute", RFC 8457,
DOI 10.17487/RFC8457, September 2018,
<https://www.rfc-editor.org/info/rfc8457>.
[RFC8474] Gondwana, B., Ed., "IMAP Extension for Object
Identifiers", RFC 8474, DOI 10.17487/RFC8474, September
2018, <https://www.rfc-editor.org/info/rfc8474>.
[RFC8620] Jenkins, N. and C. Newman, "The JSON Meta Application
Protocol", RFC 8620, DOI 10.17487/RFC8620, June 2019,
<https://www.rfc-editor.org/info/rfc8620>.
11.2. Informative References
[EFAIL] Poddebniak, D., Dresen, C., Mueller, J., Ising, F.,
Schinzel, S., Friedberger, S., Somorovsky, J., and J.
Schwenk, "Efail: Breaking S/MIME and OpenPGP Email
Encryption using Exfiltration Channels", August 2018,
<https://www.usenix.org/system/files/conference/
usenixsecurity18/sec18-poddebniak.pdf>.
[milter] Postfix, "Postfix before-queue Milter support", 2019,
<http://www.postfix.org/MILTER_README.html>.
Jenkins & Newman Standards Track [Page 107] RFC 8621 JMAP Mail August 2019
[RFC3501] Crispin, M., "INTERNET MESSAGE ACCESS PROTOCOL - VERSION
4rev1", RFC 3501, DOI 10.17487/RFC3501, March 2003,
<https://www.rfc-editor.org/info/rfc3501>.
[RFC7489] Kucherawy, M., Ed. and E. Zwicky, Ed., "Domain-based
Message Authentication, Reporting, and Conformance
(DMARC)", RFC 7489, DOI 10.17487/RFC7489, March 2015,
<https://www.rfc-editor.org/info/rfc7489>.
[XCLIENT] Postfix, "Postfix XCLIENT Howto", 2019,
<http://www.postfix.org/XCLIENT_README.html>.
Authors' Addresses
Neil Jenkins Fastmail PO Box 234, Collins St. West Melbourne, VIC 8007 Australia
Email: neilj@fastmailteam.com URI: https://www.fastmail.com
Chris Newman Oracle 440 E. Huntington Dr., Suite 400 Arcadia, CA 91006 United States of America
Email: chris.newman@oracle.com
Jenkins & Newman Standards Track [Page 108]
/home/gen.uk/domains/wiki.gen.uk/public_html/data/pages/rfc/rfc8621.txt · Last modified: 2019/08/08 23:06 by 127.0.0.1