=DWARF
$04=GNOME
$05=HOBBIT
ANY OTHER VALUE WILL GIVE YOU
"NORACE".
CHANGE IF YOU WISH.
5) ... KE YOUR
CHAR 0 YEARS OLD BY ENTERING $00 FOR
THIS VALUE.
7) AT THE 32ND BYTE AFTER THE NAME
YOU WILL FI... $01=GOOD
$02=NEUTRAL
$03=EVIL
ANY OTHER VALUE WILL GIVE YOU "NO
ALIGNMENT". CHANGE IF YOU WISH.
that because he owns a USR HST
modem it's resale value is great enough to allow him to upgrade (buy
sell... and Hayes, the USR modems have a VERY high
resale value. It is more practical in most instances, even wh... ually you do very well on this, cheaper yes! But value: NO! Remember
the 9600V, remember the Hayes 9600... ied that you have a modem that has genuine resale
value, and is compatible with 100% of the existing mode
The printer slot # is stored at $CE. The 2nd slot value is stored
at $CF.
5. You can use the page zer... etween $80 and $8F.
4. The graphics density value is stored at location $4B. A zero
indicates si
! MAX Files Values
$AAB1 ! Max files Default Value
$AA68 ! Drive - Number EX: POKE 43624,DR D... 8 is returned then APPLESOFT is in ROM. Any other value means
APPLESOFT is in RAM or not availabl
nly with a variable: X% = PEEK (2048) assigns the value located at 2048 to the integer variable X%.
POKE makes a program write a value to a memory location. The format of the statement is POKE <memory location>,<value> where <memory location> is a positive integer from 0 to 65535 and <value> is a positive integer from 0 to 255. Programmers
MAX Files Values
$AAB1 ! Max files Default Value
$AA68 ! Drive - Number EX: POKE 43624,DR ... 8 is returned then APPLESOFT is in ROM. Any other value
means APPLESOFT is in RAM or not
1) CAN POKE AT 1024-2039 THE ASCII VALUE OF A DIGIT AND PUT THAT DIGIT
ON THE CRT. (HEX AT $400). 102... HE BEGINNIG ADDRESS OF FP PROGRAMS.
PEEK (104) IF VALUE = 8 THEN APPLESOFT IN ROM, IF NOT 8, THEN
AP... BOARD. IF >127 THEN KEY WAS HIT.
PEEK (-18070) IF VALUE IS 150 THEN IN DOS 3.3
PEEK (43616) + (43617) : 2... COMPARE AND LIST DIFFERENCES)
CALL -550 PRINT HEX VALUE OF ACCUMULATOR
CALL -657 ALLOWS A LINE OF INPUT (
MAX Files Values
$AAB1 ! Max files Default Value
$AA68 ! Drive - Number EX: POKE 43624,DR ... 8 is returned then APPLESOFT is in ROM. Any other value means
APPLESOFT is in RAM or not a
THIS COMMAND MEANS LOAD THE ACCUMULATOR WITH THE VALUE OF THE BYTE
THAT IS AT HEXIDECIMAL ADDRESS $C000.... CUMULATOR IS POSITIVE AFTER BEING LOADED WITH
THE VALUE OF THE BYTE THAT IS IN $C000.
THIS CAUSES ... WHAT
HAPPENED. PRESSING A KEY SETS CLOCKS THE "D" VALUE OF A D- FLIP FLOP
INTO THE "Q" OUTPUT. SINCE "D" ... UMBER $00.
THE SECOND LINE: STA $0400 STORE THE VALUE IN THE ACCUMULATOR IN
MEMORY LOCATION $0400.
TH
next 8 locations
and their values.
To change the value of a specific
location, we must type the lo... , with out the '$', as above) a
':' and then the value we want to
change it to. For example, suppose we
wanted to change the value in location
$300 to a $A9, we would type the ...
than to type each location, a colon and
then the value. you can just type the
first location, then fol
ng mode,
the arguement is subtracted from the
value currently held in accumulator,
and the result ... log to digital converter)
command adds the value in the
accumulator to the arguement plu