~~~~~~~~~~~~~~~~
*S*> CIRCUT Display Status Report
*S*> CIRCUT nnn OFF Turn off circut 'nnn' and print Status report
*S*> CIRCUT nnn OFF N Turn off circut '... n,mmm ON Turn circuts 'nnn' to 'mmm' on and prnt status report
*S*> CIRCUT nnn,mmm,ON N Turn on 'nnn' ... tem Output data will contain the values
of the 19 status regiters as follows:
0 1 2 3
ount byte 0, then byte 1.
0008 r DMA channel 0-3 status register
bit 7 = 1 channel 3 request
bit 6... ffer (ISA, EISA)
should only be read from after status port bit0 = 1
should only be written to if status port bit1 = 0
keyboard commands (data also goes to ... m)
E9 sngl get mouse information
read two status bytes:
byte 0
bit 7 unused
bit 6
tion
0-7 Reserved
8 S - Status bit:
if S=1 then FP device is... SMIE=1) THEN
{
SAVE STATUS OF EXECUTION TO SMRAM;
ENTER SMM;
... =0 Disable soft SMI
SMMS is <SMM status bit> (DR6.bit12)
=1 SMM was entered
=0 SMM status cleared
Flags Affected: None
CPU mode: RM?, PM0
without the need to constantly poll the request's status.
See also Callout.
Callout
A call made by the o... xecuted, its parameters, and space for a returned status
and data values. See INT 2Fh Function 0802h.
DG... lock used to pass requests to NetBIOS and
receive status information from the NetBIOS handler.
Network Re
anel Indicators on the Modem
The modem has twelve status lights, or LEDs. See Appendix B for descriptions... information.
Equalization Long/Short:
Status of S15 bit 0; long if bit 0=0, short
if... Not used
I10 View Dial Security Account status. For security administrators
only, unl... 53.2=0.
Figure 6.4--Sample Dial Security Account Status Screen
ati10
USRobotics Courier Dual Standard V.