.......................12
4.1. PIM Protocol State ........................................13
4.1.1. General-Purpose State ..............................14
4.1.2. (*,G) State ........................................15
4.1.3. (S,G) State ........................................17
otocol Standards" (STD 1) for the standardization state
and status of this protocol. Distribution of... rsion 2 of the OSPF protocol. OSPF is a
link-state routing protocol. It is designed to be run inter... ............ 8
1.3 Brief history of link-state routing technology ........ 11
1.4 Organ... .......................... 12
2 The link-state database: organization and calculations 13
2
on in reset handling
while in the SYN-RECEIVED state. The TCP header control bits from
RFC 793 hav... erminology Overview
3.3.1. Key Connection State Variables
3.3.2. State Machine Overview
3.4. Sequence Numbers
3.4.1. Initial Seque... ry of terms in Section 4.
3.3.1. Key Connection State Variables
Before we can discuss the operation
otocol Standards" (STD 1) for the standardization state
and status of this protocol. Distribution of ... ton ...................... 11
4.1 State Transition Table .......................... 12
... s which are specified in the following simplified state diagram:
+------+ +-----------+ ... This exchange is complete,
and the LCP Opened state entered, once a Configure-Ack packet
(describe
ntended to reflect a past,
current, or desired state of a given resource, in a format that can
be r... a transferable representation
of the resource state, rather than transferring the resource itself.
... t ("take the place of") the current
or desired state of that thing in our communications. When a
r... provide both a representation of
the resource state and processing instructions that help guide the
otocol Standards" (STD 1) for the standardization state
and status of this protocol. Distribution of ... otocol Standards" (STD 1) for the standardization state
and status of this protocol. Distribution of ... defines MIB module objects to maintain session
state information, then the Transport Model MUST define...
A Transport Model session is associated with state information that
is maintained for its lifetim
........ 86
4.2.2.8 TCP Connection State Diagram ................. 86
4.2.2.... ks.
(b) Gateways don't keep connection state information.
To improve robustness... rvening gateways and networks.
All state information required for end-to-end flow control
... (BBN), Frank Wancho (USA), Arun
Welch (Ohio State), Bill Westfield (Cisco), and Rayan Zachariassen
otocol Standards" (STD 1) for the standardization state
and status of this protocol. Distribution of ... .................... 3
4. The AUTHORIZATION State ..................................... 4
... ...................... 5
5. The TRANSACTION State ....................................... 5
... ........................... 9
6. The UPDATE State ............................................ 10
otocol Standards" (STD 1) for the standardization state
and status of this protocol. Distribution of ... .......................... 37
4.5.1. Release State Reference Information ..................... 37
... IN stateReference -- reference to state information
) -... IN stateReference -- reference to state information
-
icial Protocol Standards" for the standardization state and status
of this protocol. Distribution of ... regardless of
their current state) present on this system."
::= { int... DESCRIPTION
"The desired state of the interface. The
testing(3) state indicates that no operational
ping Requests ......................26
2.4. State Synchronization and Connection Timeouts ............ se
services are provided by maintaining shared state between the source
and the sink of an IP datagram. This state defines, among other
things, the specific serv... ographic algorithms.
Establishing this shared state in a manual fashion does not scale
well. Ther
For each of these links the sender keeps a set of state variables,
including a copy of the source-address... sender sets the
destination-address field to this state variable and the
source-address field to its own ... ical clock and the "Timestamp" field
from another state variable. It finally copies the "Delay" and
"Off... checksum fails. If valid, it initializes a link state variable
to show that the link is up. Each time
otocol Standards" (STD 1) for the standardization state
and status of this protocol. Distribution of ... Wire Format .............................6
4. State Table .............................................. eter. Failure to remove
information about the state of defunct keys from the database will
not adv... ses except for validating the
revocation.
4. State Table
The most important thing to understand
and Replies ...................... 37
4.4. State Diagrams ........................................... transaction is starting and to reset all its state tables and
buffers, including any recipi... der-SMTP and the receiver-SMTP are in the initial state,
that is, there is no transaction in progress and all state
tables and buffers are cleared.