ion over which data is transferred, in a
specified mode and type. The data transferred may be a part... DTP or its designate should "listen" on
the specified data port, and the server initiate the data
... nnection and data transfer in accordance with the specified
parameters. It should be noted that the da... r-FTP process must ensure a
"listen" on the specified data port. It should also be noted that
th
led a connection.
Each connection is uniquely specified by a pair of sockets
identifying its two side... orks connected together.
A connection is fully specified by the pair of sockets at the ends. A
local so... rt name with a given process.)
A connection is specified in the OPEN call by the local port and
foreign ... In the first case, the local request has fully
specified the foreign socket. In this case, the match must
col service
interfaces and mechanisms are specified using an abstract state
machine model.
... n [3]. Later, IP and TCP
were separated and specified as two distinct protocols in [4] and
[5]. ... plementation dependent and therefore not
specified.
A given IP implementation may have slightl... vide at
least the interaction primitives specified below to guarantee
that all IP implementatio
led a connection.
Each connection is uniquely specified by a pair of sockets
identifying its two side... orks connected together.
A connection is fully specified by the pair of sockets at the ends,
since the s... rt name with a given process.)
A connection is specified in the OPEN call by the local port and
foreign ... In the first case, the local request has fully
specified the foreign socket. In this case, the match must
an integer result. This equals 'true' if the page specified
is a process page, else it equals 'false' and th... VALUE INTEGER page, access );
If the page specified is a process page then the ACF of that page
is c... LOCATION INTEGER pct, pdr );
If the page specified is a process page then pct and pdr are set to
the... system options and various
buffer addresses, are specified in the configuration file, EMMSYS.SML .
2.1.7i
led a connection.
Each connection is uniquely specified by a pair of sockets
identifying its two side... orks connected together.
A connection is fully specified by the pair of sockets at the ends,
since the s... rt name with a given process.)
A connection is specified in the OPEN call by the local port and
foreign ... In the first case, the local request has fully
specified the foreign socket. In this case, the match must
each process, a set of basic attributes is specified including a
name, an initial program entr... s signalled by the clock manager
after a specified time period has elapsed. Both the event ID and
the data word of the event message are specified by the process
that sets the alarm. An... tprio
Function: get primary I/O devices of specified process
Usage: getprio (pid, priop)
attributes are groups of data fields which, if specified,
cause the protocol mechanisms referred to above to be invoked.
If an attribute is not specified, default processing mechanisms
will be invoked an... on to a remote network. The
gateway(s) to the specified network is (are) responsible for
accepting the ... tion and a
Source Network field.
If not specified the datagram is not routed outside the
local ne
lding time choice consists of either twice the specified
delay class or two minutes. The reliability c... indication, the message will be
stored on the specified category queue until the host indicates
it is wi... eclared down if it has not been heard from in
a specified time, currently about thirty seconds. The host w... e waiting queue (ARN). If ARN is longer than a specified
threshold, sending of control messages will tak
AC is not of concern to ST itself and is not
specified in this document. Higher level protocols such as... t be achieved with the entire
set of targets specified by TBM. Some may be unreachable for any
of ...
messages contains several fields. Some are specified by the
originator of the CONNECT. Others ar... ity used in traffic control
computations, is specified by means of three parameters; a stream
inter
ssing modules
according to formats and procedures specified in this document. The
message processing modules... re several aspects to a distributed service to be specified.
First, there is the service to be provided; th... rovides is to accept
messages conforming to a specified format, to attempt to deliver
those messages,... re encoded in a highly
structured and rigidly specified format.
2.4. Mechanisms
MPMs are processes w
n needed to forward a piece of
information to its specified address.
The routing action may only require... t
which each intermediate routing decision is specified:
a. The source may specificy all of the interme... nt'
of the routing decisions -- when are they specified, and how frequently
they may be changed:
a.... a piece of information to the resource originally
specified, an error recovery procedure can systematically t
ssing modules
according to formats and procedures specified in this document. The
message processing modules... re several aspects to a distributed service to be specified.
First there is the service to be provided, tha... rovides is to accept
messages conforming to a specified format and to attempt to deliver
those messag... re encoded in a highly
structured and rigidly specified format.
2.4. Mechanisms
MPMs are processes w
for example,
there may be no process bound to the specified address on the
remote system, and it may not oper... NR flow
control packets are accepted, but have no specified effect on the
using layer. The machine apparentl... 5
layer up to the user.
2h The expedited data is specified to be "unsynchronized with
respect to data in the... .g. transport
and network address fields are both specified as adr_type).
3g Sections 5.2.3, 5.2.7, and 5.2.
RFC-733 model messages are sent by a user to a
specified recipent in the format <user>@<host>, where <host... ith
their transport and message headers, onto a specified mail
file. Case (3) is implemented by the MTPSRV... eractive dialog and then edits
the text as specified by the user. Note that, as
illustrated in ... MTP user program. This program first searches
a specified mail file and constructs a data structure