IBM representatives by Digital,
irregardless, IBM found itself left with Microsoft's offering of "Microso... system to an extensive quality-assurance program, found well over
300 bugs, and decided to rewrite the pr... as essentially free) and
many software developers found it easier to port existing CP/M software to DOS
t...
in the DOS environment. If COMMAND.COM cannot be found, the system will halt.
NOTE: DOS 3.3 checks for
nia at Berkeley, California. Most of the features found in
the BourneShell are also found in the other shells; there are
differences, however. The CShell and K... current working directory. If the program is not found,
the search continues in the /bin and then the /u... ntain executable programs. If the
program is not found in one of these directories, the BourneShell
repo
describe the C programming language, as commonly
found with compilers for the IBM PC, to enable a comput... standard facilities provided by Turbo C should be found in later releases
of Microsoft C.
Differences ... and
branches program execution to the first match found. The general form of
switch is;
switch (ex... ogram;
printf("\n%s\n",(result == 0) ? "Not found" : "Located okay");
Here it passes either "Not f
current working directory. If the program is not
found, the search continues in the /bin and then the /u... ntain executable
programs. If the program is not found in one of these
directories, the BourneShell reports that the program can't be
found (or executed).
The PATH variable lists the pathn... ³
³ a.out not found ³
³
251/11 cards in IBM XT's and XT clones. User has found that
after signing on the System 38, the sys...
ERROR 30 S/3X FILE(S) NOT FOUND
Remove any periods found in file names before attempting to transfer on
the AS/400. It should be... s necessary to
make sure that KERNEL.EXE (found on disk 1 of the emulation software)
is a
d connection. It lists the error messages found in
________
derrno.h, the decimal value for each ... _
disconnection. It lists the error messages found in derrno.h, the
decimal value for each message, ... o such
link found at remote.
42 ECOMPLETE ... 2. No default access control information found in the local
node's node database f
ed with the Hi Res mode on a 25MHz 386 tonight. I found much of the
jitter in values disappeared when I ... yond the 4/21 for constants N & D
which Greg Alt found. It was actually most stable a little below that
... ed with the Hi Res mode on a 25MHz 386 tonight. I found much of the
> jitter in values disappeared when ... ith polynomial prediction on my mouse driver, and found the first
order prediction was ok, but higher o
initialization
bit 2 = 1 CMOS RAM time found invalid
bit 1 = 1 adapters do not match... hecksum over 10-2D
30 LSB of extended memory found above 1Mb at POST
31 MSB of extended memory found above 1Mb at POST
32 date century in BCD
3... error
bit 5 reserved
bit 4 = 1 ID found
= 0 ID not found
bit 3 reserved
in 80386/80387 systems is very similar to the one
found in 286/287 systems. However, to prevent corruptio... n as "self-modifying code"). If no coprocessor is found the interrupts
point to the emulation package, wh... s, EM87 and
Franke387 V2.4, already mentioned. He found Franke387 to be the best in terms
of reliability,...
commercial system test programs. However, I found it to fail the
Whetstone and Linpack benchma
nd shell for an O/S.
Sure there was a manual. I found two files. The one you probably
want is INFO;DDT... s redefined in the same symbol block that
it was found in. This permits some obscure hackery, but
norm... the search, leaving "."
set to the last location found.
<loc>$,<n>$E
searches for such locations after... loc1> to <loc2>. When such
a location <locx> is found, "<locx> / <contents-of-locx>" is
typed, and "
cache memory is not present.
If cache memory is found present then with cache on test 32kb of memory.
... type set in CMOS is different from what BIOS has found
out.
action: Register "CMOS display type mismat... here is a segment
where address line error is not found. That will be the bottom of the
conventional memo... here is a segment where address line error is not
found. That will be the bottom of extended memory.
Now
ADDRESS OF FCB
ON RETURN:
REG AL = 00 = FILE FOUND
FF = FILE NOT FOUND
-----------------------------------------------------------
INT 21 - CLOSE DISK ... wildcard chars
ON RETURN:
REG AL = 00 = FILE FOUND
FF = FILE NOT FOUND
NOTE - If file found, FCB is created at DTA address
and set up to OPEN or DE
ther thing however.
The SYSTEM.TPU file (found in TURBO.TPL) is extraordinary in that
... Header in which the name of this unit is found.
UGHsh contains an LL (WORD) which po... iption
of this subfield is found in a later section
(4.4.... procedure and increments by 4. I have found nothing in the SYSTEM
with source and symbols loaded. DEBUG can be
found on the PCDOS or MSDOS system diskette. If you do ... dow, and the command window. If S-ICE.DAT was not found then
you will have a small window in the cen... ecified. The address of
each occurrence found in the range is displayed.
Example :
... d value are displayed. If the symbol name was not found then
nothing is displayed.
T
t.
The latest version of this file can always be found on Aardvark BBS
(New York, NY) at (212) 496-8324 ... with an USR HST DS/v.32bis modem. It
can also be found in the Lunatic Fringe BBS (Plano, TX) at (214) 42... d goodbye files, the filename to the news file is found in the CON-
TROL.DAT file. It can be in any... 2 mail reader by Sparkware.
The filename is found on line 8 of the CONTROL.DAT file.
[3.7] New up