metimes called
a "request/response pair". The first two exchanges of messages
establishing an IKE ... four messages) to establish the IKE SA and the
first Child SA. In exceptional cases, there may be mor... e request (or abandon
the connection).
The first exchange of an IKE session, IKE_SA_INIT, negotiat... the two identities, and sets up an SA
for the first (and often only) AH or ESP Child SA (unless there
ce. To identify the description
of device-X's first network interface, four pieces of information are... re, Inc.
postal: 2141 North First Street
San Jose, Ca... the same ID value.
1) The very first bit is used to indicate how the
... s a length of 12 octets.
The first four octets are set to the binary
ter string
MUST be in "reading order" with the first character in the value
(according to reading order) being the first character in the
encoding. A character string... An octet string MUST be in "Model order" with the first octet in the
value (according to the Model order) being the first octet in the
encoding. Every integer in this
rated by a
"." (period or decimal point). The first digit (major version)
indicates the messaging ... ction 7.8) can occur at any time, not just in the first message on
a connection. Many implementations... both with the field name "Example-Field".
The first field line has a field line value of "Foo, Bar", ... er fields that contain additional control data
first, such as Host on requests and Date on responses,
be an integral multiple of 8 octets,
but the first must be). Call the number of 8 octet blocks in the
first portion NFB (for Number of Fragment Blocks). The first
portion of the data is placed in the first new internet datagram,
and the total length field is
OS NAMES 25
14.1 FIRST LEVEL ENCODING ... mplemented in many different ways. One of the
first implementations was for personal computers runnin... he Domain Name System
in a number of ways.
First, the NetBIOS names are encoded in a form acceptab... used.
There are two levels of encoding. The first level maps a NetBIOS
name into a domain system
order, that is, most
significant byte (octet) first. This byte order is commonly known as
big-end... ixed-point number with
the integer part in the first 32 bits and the fractional part in the
last 32... +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
The first twelve octets are present in every RTP packet, wh... fication is two (2). (The value 1 is used by the first
draft version of RTP and the value 0 is use
ment is a specification of the Open Shortest Path First
(OSPF) TCP/IP internet routing protocol. OSP... f two modes over non-broadcast networks.
The first mode, called non-broadcast multi-access or NBMA,
... gy that have influenced
the OSPF protocol.
The first link-state routing protocol was developed for use... .
1.4. Organization of this document
The first three sections of this specification give a gener
eporting, congestion reporting, and
first-hop gateway redirection.
IGMP is a... Failure to follow this recommendation causes the first
packet of every exchange to be l... transport layer;
(2) selects the correct first hop on the connected network (a
proces... iginating host
would be the first hop in the route.
(d) Record Route
that definition MUST specify the contents of the first 16
bits in such a way that multiple differe... vely for dynamic assignment. Applications SHOULD first use
values in this range for dynamic payload t... D that unassigned
payload type numbers be used first. However, the statically assigned
payload typ... nal comfort-
noise packets during silence, the first packet of a talkspurt, that
is, the first pack
the procedures used in SMTP in several parts.
First comes the basic mail procedure defined as a mail ... tor confirms
the transaction.
The first step in the procedure is the MAIL command. The
... g list of hosts and
source mailbox. The first host in the <reverse-path> should be
the... hosts and the
destination mailbox. The first host in the <forward-path>
should be the
sequence of Next Header values in a packet, the first one that is not
an extension header [IANA-EH] ... the IPv6 header invokes the module to process the first
extension header, or the upper-layer header if... tion
Encapsulating Security Payload
The first four are specified in this document; the last two...
note 1: for options to be processed by the first destination that
appears in the IPv
tic Encoding Considerations
4.2.3. Length-First Map Key Ordering
5. Creating CBOR-Based Proto... ork byte order
(that is, most significant byte first, also known as "big-endian").
This specificat... in the "0x" or
"0b" notation; these values are first interpreted as numbers as in C
and are then in... s) followed
by the 18 remaining items. The first item is the first key, the
second item is t
Number: 32 bits
The sequence number of the first data octet in this segment (except
when the ... is
the initial sequence number (ISN) and the first data octet is
ISN+1.
Acknowledgment Numb... eme of octets within a segment is as follows: the first data octet
immediately following the header is... ected by the receiving TCP peer)
SEG.SEQ = first sequence number of a segment
SEG.LEN = the
cuments
relating to FTP. These include the first proposed file transfer
mechanisms in 1971 t... ction.
This can be achieved in two ways: first, the user-PI or the
server-PI may implem... 5
File Transfer Protocol
argue for the first approach. In practice, FTP relies on very
little of the Telnet Protocol, so the first approach does not
necessarily involve a