t
00h get current set
01h scancode set 1 (except Type 2 ctrlr)
02h scancode set 2 (default)
... he 8042 places the real values
of port 2 except for bits 4 and 5 wich are given
a new de... for PIC 1
00A1 r/w PIC 2 same as 0021 for PIC 1 except for OCW1:
bit 7 = 0 reserved
bit 6 = 0 en... same as 03D5
03D8 r/w CGA mode control register (except PCjr)
bit 7-6 not used
bit 5 = 1 bli
is available only
on 80286 and higher machines. Except for a small portion (the High
Memory Area), exten... ified frequency
modulation omits all clock pulses except those between pairs of zero
bits. See also FM, R
modems. These modems have many similar features
except for the signaling they use to connect with remote... your situation, you can skip this
entire section except for DIP Switches, just before Installing the Mode... sing COM1 for a device, you can skip this section except
for DIP Switches, just before Installing the Mod... bination (AT
or at--not At).
3. All commands except A/, A> and +++ are preceded by the AT (attention)
. If you want, however, you can take these wires (except _KBReset)
and hook them up to a 5 pin DIN and at... te ones.
They should be the same in every respect except color. There is, however,
another alternative. Yo
en you may have to use it as an
SB, not SBP. All EXCEPT the Value Edition have the ASP socket and
"Wavebl... rd. Similar to the
SCC-1B (perhaps more voices), except not requiring a slot. Similar to the
SCD-10, plu
the system. This probably would not be a problem except maybe on a
hot day.
Rob KB7RXX @ VE7KIT
Msg #2... t. Also,
you're getting just as much dust, etc., except it's building up inside
the power supply, where y