use in language tags and the
creation of user-defined extensions for private interchange.
Status of Th... meaning
/ "zh-guoyu" ; is defined by their registration
/ "zh-hakka"... e quotes ('Hant').
o "Code" refers to values defined in external standards (and that
are used as... tags and MUST NOT be interspersed with subtags
defined elsewhere in this document. These sequences are
G modules. Recommendations and
procedures are defined, which are intended to increase
interoperabili... requests, as
indicated by the specific content defined in the YANG module.
Many YANG constructs are defined as optional to use, such as the
"description" ... higher level of compliance than the minimum level defined
in the YANG specification [RFC7950].
In ad
ogy
Abstract
The Domain Name System (DNS) is defined in literally dozens of
different RFCs. The te... changed in the
decades since the DNS was first defined. This document gives current
definitions for ... y This Document
Appendix B. Definitions First Defined in This Document
Acknowledgements
Index
... he DNS".) The protocol and message format are
defined in [RFC1034] and [RFC1035]. These RFCs defined s
list" format. Appendix
B discusses previously defined attributes that do not follow the
guidelines.
... llocated by
IANA and that follow the format defined in Section 5 of RFC 2865
[RFC2865].
Ven... ntents of the Vendor-Specific Attribute (VSA), as defined in
[RFC2865], Section 5.26. These attribut... ed
on the attribute encodings and data formats defined in RFC 2865
[RFC2865], RFC 2866 [RFC2866], and
Elements in the registry under Expert Review (as defined
in [RFC5226]).
1.2. Overview of Relevant IPF... Capitalized terms used in this document that are defined in the
Terminology section of [RFC7011] are to be interpreted as defined
there.
An "application", as used in this d... n, the IPFIX applicability
statement [RFC5472] defined the initial applications of IPFIX, and
Packet
ing their design. A number of rules have
been defined in [RFC6733] that place constraints on when an ex... o Clarify the Diameter extensibility rules as defined in the
Diameter base protocol.
o Discu... minology
This document reuses the terminology defined in [RFC6733].
Additionally, the following term... and requires a new Diameter application to be
defined, as stated in Section 1.3.4 of [RFC6733]. The ne
"MUST", "MUST
NOT", "SHALL", or "SHALL NOT" as defined in RFC 2119 [RFC2119]) of
existing BCPs or Int... D NOT", "RECOMMENDED", or "NOT RECOMMENDED" as
defined in RFC 2119) of existing BCPs or Internet Standar... ptions (in the sense
of "MAY" or "OPTIONAL" as defined in RFC 2119) in cases where there
is a consens... any
of the three types of information modules defined in Section 3 of RFC
2578 [RFC2578].
Heard
trade-off between the adoptability of previously defined
option formats and the advantages that new or ... data field. The appropriate
option format is defined as follows:
0 1 ... .
It should be noted that the IAPREFIX option defined by [RFC3633] uses
a full-length 16-octet prefi... multiple URIs is available. An
option must be defined to use either the single URI format above or
t
his or her code to
be deployed in environments defined in Section 5. In fact, this
document calls fo... d terms in this document are used in the
sense defined in [RFC4949].
The key words "MUST", "MUST NOT... thod for preventing downgrade
attacks has been defined recently in [RFC7507].)
3.2. Strict TLS
The... ST implement the renegotiation_info extension, as defined
in [RFC5746].
The most secure option for c
e64 and quoted-printable
transfer encodings defined in [RFC2045].
o Image, audio, video, and eve... MIME entities.
o Transport encodings can be defined as a means of representing
existing encodin... Nevertheless, the
following procedure has been defined in order to provide a means of
defining additi... e degree of functionality overlap with previously defined transfer
encodings is acceptable, but any new
August 2003
1.1. SNMPv1
SNMPv1 is defined by these documents:
- STD 15, RFC 1157 [RFC1... 1212, and RFC 1215.
1.2. SNMPv2
SNMPv2 is defined by these documents:
- STD 58, RFC 2578 which... document as SNMPv2c.
1.3. SNMPv3
SNMPv3 is defined by these documents:
- STD 62, RFC 3411 which... ts
is nearly a proper superset of the approach defined in the SMIv1.
For example, both approaches use
f Expert Review
and IESG Approval as those are defined in [RFC8126], where IESG
Approval is required ... bination of Expert Review and IESG
Approval as defined in [RFC8126]. IESG Approval is required only
sed by these guidelines if
it were being newly defined. This document does not address the use
of pr... .
Several additional facilities have also been defined that layer on
the base specification. Althoug... new tags (and thus new protocol elements) can be defined
without requiring changes to XML itself.
... them. Typically, ABNF definitions tend to
be defined in terms of octets or characters in ASCII.
Da
on process and authority for media features is
defined with the intent of sharing this vocabulary betwee... communicating parties. In addition, a URI tree is defined to enable
sharing of media feature definitions... on process and authority for media features is
defined with the intent of sharing this vocabulary betwee... communicating parties. In addition, a URI tree is defined to enable
sharing of media feature definitions
. . . . . . . . . . . . . . . 4
3.3. Well Defined . . . . . . . . . . . . . . . . . . . . . . 5
... r (URI) protocol element and generic
syntax is defined by [RFC3986]. Each URI begins with a scheme name,
as defined by Section 3.1 of RFC 3986, that refers to a spec... istration.
1.1. URIs and IRIs
As originally defined, URIs only allowed a limited repertoire of
cha