ere.) The beginning of a set of Qfacts records is defined by the
tag
<records>
The end of a Qfacts file is defined in SGML style by the tag
</o>
or by the en
S
API
(Application Program[ming] Interface) The defined set of calls
which a program may make to interact... ause the
inputs and outputs of the calls are well-defined, a program using the
API can continue using the i... ssing
video modes of higher resolution than those defined by IBM.
VGA
(Video Graphics Array) The video ad
are
not using.
The ASCII characters may be user-defined. See Registers S22 and S23 in
Appendix B. That... d always
be under error control. The operations defined in an error control
protocol include the followi... ollowing command example substitutes several user-defined defaults
for factory settings. The modem also s... 200 bps. The ITU-T-specified RDL signals
are defined only for connections at 2400 or 1200 bps.
3. Dis
th "active
low reset" and "inverse convention" as defined in this standard. The
following description may a... re rounded with a radius of 3.18 mm. It has eight
defined contact areas (C1 - C8 in the diagram below), eac... C8 17.87 19.87 26.85 28.55
Older card systems (defined in a French AFNOR standard) had these
contacts lo... e just
connected together in the adapter, so that defined levels are available
on them because some softwar
required property "SHDR" holds an SScoreHeader as defined in these
C declarations and following documentat... d set all "pad" fields to 0. MakeID is
a C macro defined in the main IFF document and in the source file
... red
by current programs. [See More SEvents To Be Defined, below.]
The field volume gives an overall nomin... format is extensible since new event types can be defined in
the future. The "note" and "rest" events are
l in 1986,
when the ANSI-committee X3T9.2 defined the SCSI-1 spec as
document X3.131-1986.
... adapters.
1.1. SCSI-1
SCSI-1 defined a universal 8 bit I/O-Bus that allows connection
... et.
- 16Bit- and 32Bit-Wide SCSI became a defined option.
- SCSI bus parity changed from "o... ame mandatory
- Command Queueing became a defined option. For a device with
command queue
or.row = cursor.col = 1; /* globals defined in vt100.h */
t->origin = t->addlf = t->keymod...
1,2, or 3 means that the touch sensitive area defined will
generate transmit that particul
e RAM disk is created iff the size field has been defined. Since
* sptalloc only allocates pages, make ... (dev)
dev_t dev;
{
/* Has a RAM disk been defined? */
if (rd_cfg.size == 0)
{
/* Just
ay also appear. The only formatting
property yet defined is "FONS", a font specifier. A FORM FTXT with
no... ORM FTXT uses the core of the 8-bit character set defined by the
ISO/ANSI standards cited at the start of ... the single following G0 character
into yet-to-be-defined graphic sets G2 and G3, respectively. These
sequ... optional property "FONS" holds a FontSpecifier as defined in the
C declaration below. It assignes a font t
e Intel
processor family, expanded memory is only defined in the architecture of the
IBM-PC standard.
*Ext...
XMS is an eXtended Memory Specification standard defined jointly by
Microsoft, Intel, Lotus and AST (not t... angably in any of these
frames.
30 functions are defined using int 67H, to allocate, map, swap etc these
p