ument. In this document, "IESG Ratification",
specified in Section 5.1, refers to a combination of Expert... are documentation code points under the IANA OUI specified
below.
1.4. CFM Code Points
IEEE Std 802... s (SAIs). An SAI is assigned by a
protocol specified in an IEEE 802 standard, for example,
[IEEE... SAI quadrant and assigned by a protocol
specified in an IEEE 802 standard, the SLAP is optional. L
Administration of names: Administration is specified by
delegation (see the definition of "de... ed - The name server refuses to
perform the specified operation for policy reasons. For example,
... e and restarts the
query at the domain name specified in the data field of the CNAME
record." (Q... ion RRset's RDATA contains the name servers
specified at the referred-to zone cut. In normal DNS opera
Es via "Ethernet ring protection switching" as
specified in [G.8032], and their ACs to PE1 and PE2 are rep... PN MAC/IP advertisement
route that are used as specified in [RFC7432] and used in this
document as a C-... te will be accepted and reflected by
any RR as specified in [RFC7432], since no new attributes or values
... h notification messages MUST observe the behavior specified in
[RFC7623].
5. Conclusions
The I-SID-b
where.
Busy hour: A one-hour period within a specified interval of time
(typically 24 hours) in wh... g: A class of routing protocols that takes
specified traffic attributes, network constraints, and poli... ticular service according to the parameters
specified in a Service Level Agreement. "Quality" is
... he details of how the network carries packets are specified in the
policies of the network administrators
related information along with the topology
is specified in [RFC9085] for the MPLS data plane instantiatio... rtised
(Section 3.2) using the Node MSD TLV specified in [RFC8814].
* Algorithm support for SRv6 is advertised via the SR-Algorithm TLV
specified in [RFC9085].
The SRv6 information pertaining... rtised (Section 4.3) using
the Link MSD TLV specified in [RFC8814].
The SRv6 information pertaining
tions.
6.1. Errors
The high-level functions specified in Section 4 are all fallible.
The explicit er... r generating the server signing key pair is
as specified in FIPS 186-5 [DSS].
A server signing key MUS... Functions
This document uses PSS encoding as specified in [RFC8017] for a
number of reasons. First, ... uantum Readiness
The blind signature protocol specified in this document is not post-
quantum ready, s
Extended-LSA Sub-TLVs"
registry [RFC8362], as specified in Section 14.
5. Advertisement of Application-... y any application, subject to the
restrictions specified in Section 5. If support for a new
applicatio... readvertised with an explicit set of applications specified
before a new application is introduced.
12.3.... ronger
authentication mechanisms such as those specified in [RFC5709],
[RFC7474], [RFC4552], or [RFC716
addresses that are derived from an L2 address are specified
in [RFC4944], but there are implications fo... A generic header compression technique
is specified in [RFC7400]. For 6LoWPAN networks where RPL is ... sages
rather than the hop-by-hop fragmentation specified in [RFC4944].
Mesh-under routing in Thread is
credentials for this purpose are the certificates specified
in [RFC8226] using the TNAuthList. This docum... y to demonstrate authority
for the identifiers specified by the new order (in this case, the
TNAuthList... e extension
string value as the identifier specified in the original
challenge.
7. Verify
There
is no change to all the other procedures specified in [RFC5880], such
as, but not limited to, the... NEXT_HOP is not reachable using the procedures
specified in this document.
1.1. Requirements Language
... e side starts sending the BFD Control packets, as specified
in [RFC5880]. The passive side does not send ... odule Security Considerations
The YANG module specified in this document defines a schema for data
tha
Header (NSH) must
follow the updated behavior specified in Section 3.
2. Terminology
The key words ... OAM
| data (including the order) SHOULD be specified in the relevant
| OAM or Context Header sp
y of the authentication method MUST be
clearly specified. That is, authors MUST document the assumptions
... services are expected to provide MUST be clearly specified. In
addition, the resultant properties of the combined system need to be
specified.
Note: In general, the IESG will not approve ... ecific requirements (e.g., uniqueness
during a specified period of time) that must be satisfied such that