GENWiki

Premier IT Outsourcing and Support Services within the UK

User Tools

Site Tools


archive:computers:begunix
                                UNIX for Beginning Users
                          Developed by:
                                 User Liaison Section, D-7131
                                 Denver Office
         
                          [Name and Phone number deleted at authors
                           Request]
                          Revision Date:  September 16, 1991

I. INTRODUCTION

A. Audience

This course is for individuals who will be using the UNIX operating system on a Reclamation computer platform. It is assumed that the student has a general understanding of data processing concepts.

B. Course Objectives

Upon successful completion of this course the student will be able to:

     1.     Demonstrate a knowledge of basic UNIX ideas.
     2.     Recognize the different types of files and the file
            structure.
     3.     Log in and out of UNIX using an interactive terminal.
     4.     Change the password and be aware of other
            responsibilities of owning an account.
     5.     Demonstrate a knowledge of where to get help.
     6.     Use the appropriate UNIX commands to display/print  
            files, copy/move files, change file access permissions,
            create/delete directories, and change the current
            working directory.
     7.     Transfer a file to another computer platform using File
            Transfer Protocol (FTP).  Use FTP commands to do the
            following:  initialize FTP, establish connection, local
            computer commands, remote computer commands, close
            connection, exit FTP, help command, and special
            functions.
     8.     Use an editor to create files, input text,
            insert/replace text, copy/move text, and exit/save
            changes.
     9.     Use the mail utility to send/receive/delete messages
     10.    Use basic Annex commands to reestablish connection to a
            disconnected process.

C. Course Handout Conventions

There are several conventions used in this handout for consistency and easier interpretation:

     1.     Samples of actual terminal sessions are single-lined
            boxed.
     2.     User entries are shown in bold print and are
            underlined.
            QUIT
     3.     All keyboard functions in the text will be bold.  
            (Ret)                       Backspace
            Tab                         Ctrl-F6
            Print (Shift-F7)            Go to DOS (1)
            NOTE:         (Ret) indicates the Return or Enter key
                          located above the right Shift key.
     4.     Examples of user entries not showing the computer's
            response are in dotted-lined boxes.                     
            
     5.     Command formats are double-lined boxed.
     6.     Three dots either in vertical or horizontal alignment
            mean continuation or that data is missing from the
            diagram.

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ ³ ³ ³ ³ Multimax, Nanobus, and UMAX are trademarks of ³ ³ Encore Computer Corporation ³ ³ ³ ³ ³ ³ Annex is a trademark of XYLOGICS, Inc ³ ³ ³ ³ ³ ³ UNIX and Teletype are registered trademarks of ³ ³ AT&T Bell Laboratories ³ ³ ³ ³ ³ ³ Ethernet is a trademark of Xerox Corporation ³ ³ ³ ³ ³ ³ ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

1. BASIC UNIX IDEAS

The UNIX operating system is a set of programs that act as a link between the computer and the user. The programs that allocate the system resources and coordinate all the details of the computer's internals is called the operating system or kernel.

Users communicate with the kernel through a program known as the shell. The shell is a command line interpreter; it translates commands entered by the user and converts them into a language that is understood by the kernel.

Here is a basic block diagram of a UNIX system.

                  Spread Sheet  Compilers  
                  Calculators       ³
                       ³            ³
                       V            V      
               ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
               ³          The Shell            ³   Mail and
               ³   ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿    ³<- Message
  Inventory    ³   ³  UNIX system kernel  ³    ³   Facilities
  Control  --->³   ³   ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿   ³    ³
  Systems      ³   ³   ³              ³   ³    ³<- Interpreters 
               ³   ³   ³   Hardware   ³   ³    ³
  Formatters ->³   ³   ³              ³   ³    ³<- DBMS
               ³   ³   ³              ³   ³    ³
  Calendar     ³   ³   ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ   ³    ³   Word
  Systems ---->³   ³                      ³    ³<- Processors
               ³   ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ    ³
  Editors ---->³                               ³<- FTP
               ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

The designers of UNIX used the following Maxims while writing the new operating system.

     1.     Make each program do one thing well.  These simple
            programs would be called "tools."
     2.     Expect the output of every program to be the input to
            another program.
     3.     Don't stop building new "tools" to do a job.  The
            library of tools should keep increasing.

1.1 The UNIX System

The main concept that unites all versions of UNIX is the following four basics:

Kernel

The kernel is the heart of the operating system. It schedules tasks and manages data storage. The user rarely interfaces with the kernel directly. This is the memory resident portion of the operating system.

Shell

The shell is the utility that processes your requests. When you type in a command at your terminal, the shell interprets the command and calls the program that you want. The shell will support multiple users, multiple tasks, and multiple interfaces to itself. The shell uses standard syntax for all commands. There are two popular shells currently available, the BourneShell (standard System V UNIX) and the CShell (BSD UNIX). Because separate users can use different shells at the same time, the system can appear different to different users. There is another shell known as the KornShell (named after its designer), which is popular with programmers. This ability to provide a customized user interface is one of the most powerful features of UNIX.

Commands and Utilities

Separate utilities can be easily combined to customize function and output. They are flexible, adaptable, portable, and modular. They use pipes and filters. There are over 200 standard commands plus numerous others provided through 3rd party software.

Files and Directories

The directory system supports a multilevel hierarchy. Files and directories have access protection. Files and directories are accessed through pathnames. Files support multiple name links. Removable filesystems are also supported. 1.2 File Structure

All data in UNIX is organized into files. All files are organized into directories. These directories are organized into a tree-like structure called the filesystem. The following diagram describes the top level organization of the UNIX filesystem:

                            /
                          (root)                       
                            ³                       
 ÚÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÂÄÄÁÄÄÄÄÂÄÄÄÄÄÄÂÄÄÄÄÄÄ¿        
 ³       ³       ³       ³       ³      ³      ³     

bin dev etc lib tmp usr users

These directories, in turn, are also organized hierarchically.

For example:

                            /
                            ³                 
      ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
      ³                  ³                       ³
     dev                etc                     usr             
      ³                  ³                       ³
  ÚÄÄÄÁÄÄ¿           ÚÄÄÄÁÄÄ¿        ÚÄÄÄÄÄÄÄÄÂÄÄÁÄÄÄÄÄÄÄÄÄÄÄ¿
  ³      ³           ³      ³        ³        ³              ³
dsk     rmt       init.d  rc0.d    mail      adm          spool
                                              ³             
                                          ÚÄÄÄÁÄÄÄ¿            
                                          ³       ³         
                                        acct     sa

In this example, dev, etc, usr, and adm are directories. Directories contain other files or directories. Plain files contain text or binary data and contain no information about other files or directories. Users can make use of this same structure to organize their files.

For example:

                       / 
                       ³
      ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
      ³                ³             ³        
     bin             users          dev
                       ³
         ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿         
         ³                             ³      
      bsmith                         sjones          
         ³                             ³      
   ÚÄÄÄÄÄÁÄÄÄÄ¿             ÚÄÄÄÄÄÄÄÄÄÄÁÄÄÄÂÄÄÄÄÄÄÄÄÄÄ¿ 
   ³          ³             ³              ³          ³
 memos      progs        physics          chem     history
   ³          ³             ³              ³          ³  
ÚÄÄÁÄÄ¿    ÚÄÄÁÄÄÄ¿      ÚÄÄÁÄÄÄ¿       ÚÄÄÁÄÄ¿      ÚÁÄÄ¿
³     ³    ³      ³      ³      ³       ³     ³      ³   ³

mfg eng c f77 mods calcs forms notes loc anc

Every file has a name. A filename is composed of one to fourteen characters. Although you can use almost any character in a filename, you will avoid confusion if you choose characters from the following list.

     1.     upper case letters [A-Z]
     2.     lower case letters [a-z]
     3.     numbers [0-9]
     4.     underscore [_]
     5.     period [.]
     6.     comma [,]      

The only exception is the root directory, which always uses the symbol /. No other directory or file can use this symbol.

Like children of one parent, no two files in the same directory can have the same name. Files in different directories, like children of different parents, can have the same name.

The filenames you choose should mean something. Too often, a directory is filled with important files with names like foobar, wombat, and junk. A meaningless name won't help you recall the contents of a file. Use filenames that are descriptive of the contents. 1.3 UNIX System Files

In order for you to have a basic understanding of the contents of some of the system directories, here is a partial list of those directories and what files they contain:

/bin This is where the executable files are located.

                   They are available to all user.

/dev These are device drivers.

/etc Supervisor directory commands, configuration

                   files, disk configuration files, reboot files,
                   valid user lists, groups, ethernet, hosts, where
                   to send critical messages.

/lib compiler libraries

/tmp scratch processes, editors, compilers, and

                   databases

/bsd Berkeley commands

/mnt empty, used for disks

/stand boot information

/lost+found orphans go here (look here after system crash)

/unix* executable, bootable kernel

This is not an exhaustive list of directories that contain system information but it is intended to remove some of the mystery behind these directories and the types of files they contain. 1.4 Command Line Syntax

Users enter commands at the shell prompt. The default BourneShell prompt is the dollar sign ($). In general, the shell expects to see the following syntax:

ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º Command Format: command options arguments º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ

Command - This is the UNIX command. Sometimes the command

                   is representative of the function.  For example,
                   the command to list the contents of a directory is
                   ls.  The first and third letters of the word
                   "list" are used.  Unfortunately, this is not
                   always the case.

Options - These are also known as flags. The common form

                   is:
                                           -A
                   where A is the abbreviation of the optional
                   function of the command.  For example, the command
                   ls lists the contents of a directory, while the
                   command ls -l provides a long listing and ls -C
                   provides output in columns.  Several options can
                   be combined following one '-'; for example -CF, or
                   they can be entered separately as -C -F.

Arguments - These can be file names, user names, or qualifiers

                   to the command or one of its options.

Example:

……………………………………………………….. . $ls -CF sjones . ………………………………………………………..

The UNIX command is ls list contents of directory the dash (-) indicates the options.

   C  =     Multiple-column output with entries sorted down the
            columns
   F  =     Put a slash (/) after each filename if that file is a
            directory and put an asterisk (*) after each filename
            that is executable.

sjones = name of the directory to list (it can be a

        relative or absolute pathname)

Example:

……………………………………………………….. . $diff memo1 memo2 . ………………………………………………………..

diff - differential file comparator command

memo1 - filename argument

memo2 - filename argument

This command will tell what lines must be changed in two files to bring them into agreement. Here is another example that doesn't fit the general syntax for UNIX commands.

Example:

……………………………………………………….. . $find . -atime +7 -print . ………………………………………………………..

find - find files

. - the current working directory

-atime - True if the file has been accessed in n days (n is

                   the +7)

-print - always true; causes the current path name to be

                   printed

So, this command will give a listing of all files in your current working directory that have been accessed in the past seven days.

Some commands have several options and/or arguments; while others, like passwd and mail, are interactive and will prompt the user for additional input. 1.5 Correcting Mistakes

Because the shell and most other utilities do not interpret the command line (or other text) until you press the (Ret) key, you can correct typing mistakes before you press (Ret). There are two ways to correct typing mistakes. You can erase one character at a time, or you can back up to the beginning of the command line in one step. After you press (Ret), it is too late to make a correction.

1.5.1 Erasing Characters

When entering characters from the keyboard, you can backspace up to and over a mistake by pressing the erase key (#) one time for each character you wish to delete. The # will appear on the screen, and the character preceding it will be discounted.

Example:

……………………………………………………….. . $ls phajne#y . ………………………………………………………..

In this example, the e will be ignored and ls phajny is sent to the Multimax. Multiple typos can be erased; simply press one # for each character to be erased. The erase key will back up as many characters as you wish, but it will not back up past the beginning of the line.

1.5.2 Deleting an Entire Line

You can delete an entire line you are entering any time before you press (Ret) by pressing the kill key (@). When you press the @ (kill key), the cursor moves down to the next line and all the way to the left. The shell doesn't give you another prompt, but it is as though the cursor is following a prompt. The operating system does not remove the line with the mistake but instead ignores it. Now enter the command (or text) again from the start. 1.5.3 Aborting Program Execution

Sometimes you may want to terminate a running program. UNIX might be performing a listing that is too long to display on your screen or for some other reason you want to terminate execution. To terminate program execution press the Delete key. The operating system sends a terminal interrupt signal to the shell. When the shell receives this signal, it displays a prompt and waits for another command.

1.5.4 Controlling Output to the Screen

There are several ways to control the flow of characters to the screen as a result of executing a command. Such as:

Ctrl-S - This keyboard function command will suspend

                          the flow of characters to the screen as the
                          result of executing a command.  The screen
                          will not continue until the keyboard function
                          to resume output is given.

Ctrl-Q - This keyboard function command will resume

                          the output to the screen.

Hold Screen - If your terminal has this key (i.e. VT200),

                          you can press it once to stop output to the
                          screen.  To resume output to the screen,
                          press the key again.

Denver BOR MULTIMAX

Each BOR Multimax 310 has four 15 Megahertz National Semiconductor 32-bit processors with 64 kilobytes of cache memory rated at 2 million instructions per second (MIPS) for a total of 8 MIPS. The main memory consists of 32 megabytes (million bytes). There can be a maximum of 14 disk drives. Each drive has a capacity of 600 megabytes for a total capacity of 8.4 gigabytes (a gigabyte is one thousand million bytes)

Connection to the Multimax is accomplished through one of several methods. Access is made through TCP/IP based Annex terminal servers. The two Annex II servers have 32 ports each and the Annex I has 16 ports. The Annex II servers will allow up to 64 users access to the two Multimax computers. The Annex I is used for access to the on-line printers. CDCnet and TELNET are other ways to gain access to the Multimaxes.

Printouts are handled on a 600-line-per-minute line printer and a 10-page-per-minute laser printer. Each Multimax has a hardcopy terminal and a CRT to serve as an operator console. There are two tape drives capable of 1600 or 6250 bits per inch (bpi) on each system. There is also a cassette tape drive.

Software available are FORTRAN, COBOL, C, and UNISOL (an accounting package). The database management system is INGRES by Relational Technology, Inc. PROCOMM+ will be the communication interface with IBM PC's and compatibles. The operating system for the Multimax is UMAX V. UMAX V is the name for the Encore implementation of UNIX System V. 1.6 Logging on the Annex

This sample session shows how the login process is displayed on the terminal screen and is uniform for all users. To bring the standard menu onto the screen, press the Space Bar. If you are using a PC, first start PROCOMM+. Then when you are in the Terminal-Mode Screen, press the Space Bar; and the MICOM menu will appear.

NOTE: Login procedures from the regions are included in the

            back of this manual

Sample Session:

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ WELCOME TO THE B.O.R. NETWORK P/S:B ³ ³ SYSTEMS PRESENTLY AVAILABLE ARE: ³ ³ ³ ³ SYSTEM NAME ³ ³ ³ ³ VAX 8300'S VAX ³ ³ CYBER/CDCNET F.E. CDC ³ ³ ENCORE/UNIX MAX ³ ³ OUT DIAL OD ³ ³ ³ ³ TO SELECT A SYSTEM, ENTER THE SYSTEM ³ ³ NAME AND CARRIAGE RETURN AT NEXT ³ ³ PROMPT. ³ ³ ³ ³ CHANNEL 08/061. ENTER RESOURCE MAX ³ ³ ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

MAX is the resource name you must enter to be connected to the Annex, which is the Multimax front end processor. Some MICOM menus might not have the MAX selection; in this case, enter MAX to select the Annex. This is the same as if the menu showed the option. After entering MAX you will see something similar to the following:

Sample Session:

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ CONNECTED TO 06/011 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

This indicates that you are connected to the port selector. Wait two seconds, press (Ret) twice, and the annex prompt will appear after a warning message.

Sample Session:

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ ³ ³ Annex Command Line Interpreter * Copyright 1988 Xylogics, Inc. ³ ³ ³ ³ *WARNING*Unauthorized access to U.S. Government computers ³ ³ is punishable by fine and/or imprisonment. *WARNING* ³ ³ annex: ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ 1.7 Logging on the Multimax

To establish a connection between the Annex and the Multimax enter the following command at the Annex prompt:

ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º Command Format: rlogin <host> º º º º host - name of the Multimax º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ

The Denver Multimaxes have been assigned the names domax0 and domax1. The names stand for the Denver Office Multimax System 0 and 1. The domax0 is used for production of Bureau-wide applications. The domax1 is used for training and application development and it is the one to use for exercises associated with this course.

To enter domax1 type:

Sample Session:

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ annex:rlogin domax1 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

                            or

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ annex:r domax1 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

NOTE: Abbreviations are allowed for the Annex commands, the

            only requirement is to type in enough characters to
            make it unique.

When the Annex has opened communications with the selected host, the following prompt will appear:

Sample Session:

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ login: ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ To connect with the host, enter your login name at the prompt. Your login name is assigned to you by the system administrator and typically will be your first initial and last name, all one word with no spaces. Only 8 characters are allowed for the username so extra letters will be truncated.

Sample Session:

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ login:rharding ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

Once the login name has been accepted, the next prompt will be for the password. The following prompt will appear on the screen.

Sample Session:

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ Password: ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

Enter your password. For security reasons, the host will not display your password as you type it.

Sample Session:

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ Password: secret ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

Once you have entered the correct password. The login procedure will continue and the following will appear on the monitor screen.

Sample Session:

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ UNIX System V Release ax.2.2o ns32332 ³ ³ domax1 ³ ³ Copyright © 1984 AT&T ³ ³ All Rights Reserved ³ ³ *WARNING*Unauthorized access to/use of this U.S. Government ³ ³ computer is punishable by fine and/or imprisonment. *WARNING*³ ³ $ ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

At this point you are successfully signed on to the Multimax. The dollar sign ($) is the default prompt for the BourneShell.

1.8 Logging Off the Multimax

At the shell prompt $, you can logout of the Multimax using one of the following methods:

     1.     Enter the keyboard function command Ctrl-D.
     2.     Type the UNIX command exit.

Once you have entered the command to logout the following will appear on the screen:

Sample Session:

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ $exit ³ ³ CLI: Connection closed. ³ ³ annex: ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

Once you are back at the Annex prompt, you can establish another connection or logout of the Annex. 1.9 Logging Off the Annex

When the Annex prompt (annex:) appears, you can enter the command to logout of the Annex. The command to logout of the Annex is as follows:

ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º Command Format: hangup º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ

There is a 60 minute inactivity timeout programmed into the Annex; however, it is a waste of resources if you don't enter hangup. When you are finished with your session, be sure to enter hangup at the annex: prompt.

If you don't type anything for 60 minutes, the Annex will log you out of the system and display the following message:

Sample Session:

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ * Annex Port Reset Due to Inactivity Timeout * ³ ³ ³ ³ Annex Command Line Interpreter ³ ³ DISCONNECTED ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

When the hangup command has been entered, the following will appear on the screen:

Sample Session:

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ annex: hangup ³ ³ ³ ³ Resetting line and disconnecting. ³ ³ ³ ³ ³ ³ Annex Command Line Interpreter * Copyright 1988 Xylogics ³ ³ annex: ³ ³ DISCONNECTED ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

1.10 Changing the Password

The following command will change the password.

ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º Command Format: passwd º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ

You will be prompted to enter the existing password (this question is skipped if you don't have a password). Next you will be prompted to enter the new password. You will then be asked to enter the new password again. This will verify that you have not made a typographical error. If the two entries are the same, the password will be changed. The new password must meet the following criteria:

     NOTE: Some of these items are configurable by the system
     administrator and these reflect the settings for the Denver
     Multimax only.
     1.     Each password must have at least six characters.  Only
            the first eight characters are significant.
     2.     Each password must contain at least two alphabetic
            characters and at least one numeric or special
            character.  Alphabetic characters can be upper or lower
            case.
     3.     Each password must differ from the login name and
            any reverse or circular shift of that login name. 
            For comparison purposes, an upper case letter and
            its corresponding lower case letter are
            equivalent.
     4.     A new password must differ from the old by at
            least three characters.  For comparison purposes,
            an upper case letter and its corresponding lower
            case character are equivalent.

Passwords on the Multimax have a thirteen-week expiration period. At the end of the thirteen weeks, you will be required to change your password. Once you have changed the password, you cannot change it again for two weeks. This prevents you from immediately changing back to the old password and eliminates a possible security violation. If you try to change the password before two weeks have passed since the last change, a warning message will be displayed.

Sample Session:

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ $passwd ³ ³ Changing password for teacher ³ ³ Old password: secret ³ ³ Sorry: < 2 weeks since the last change ³ ³ $ ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

NOTE: This is about as friendly as UMAX will ever get.

Try to choose a password that is not easy for someone else to guess. The increasing number of computer crimes involving thefts all point to a need for protecting the system from unauthorized access. Do not use words like your birthdate, telephone number, spouse's name, child's name, etc. for passwords. Although you may think passwords are an unnecessary nuisance, they are an important way to strengthen the security of the computer system.

1.11 On-line Manual

The major source of on-line help is in the form of documentation known as the on-line manual pages. The pages are divided into eight sections. Section 1 contains entries for UMAX user commands; the other sections describe administrative tools, library functions, games, and internal system structure and calls.

To gain access to the on-line manual pages enter the following command:

ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º Command Format: man <command> º º º º command - the UNIX command you want information about º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ

NOTE: The name 'man' stands for manual.

Example:

……………………………………………………….. . $man ls . ………………………………………………………..

This command will display the on-line manual pages for the ls command.

The on-line manual pages entry begins with the command name and a one line summary followed by a synopsis of the command line syntax. Optional flags and arguments are enclosed by square brackets []. A detailed description of the command and all of its options and arguments follow the synopsis. The description can include helpful examples. At the conclusion of the entry, related files and commands are listed.

NOTE: Most on-line manual pages will fill more than one

            screen.  Be sure to control the output to your screen.

1.12 who and finger Commands

Once you have logged onto the Multimax, you can find out who is logged on the system with the following commands:

ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍË º Command Format: who [options] º º º º options - see man pages for a complete list º º º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ

The default output (no options) of the who command lists the user's login name, terminal line, and the time that the user logged in.

Sample Session:

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ $who ³ ³ jwheeler ttyp0 Aug 15 10:26 ³ ³ mvlsdba rt02190 Aug 15 09:25 ³ ³ teacher rt020b0 Aug 15 11:07 ³ ³ eholderf rt021c0 Aug 15 11:03 ³ ³ dbowman rt01150 Aug 15 08:58 ³ ³ $ ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

Options will display other information about the users that are currently logged onto the system. Some items available are the amount of time that has elapsed since activity occurred on that line, the process identifier (PID) of the login process, comments, and exit information. A UNIX command that provides a little more information about users that are logged in the system is the finger command.

ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º Command Format: finger [options] [user1] º º º º options - see on line manual for complete list º º º º user1 - login name º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ

The finger command with no options will list the login name, full name, terminal name, write status (an asterisk (*) before the terminal name indicates that write permission is denied), idle time, login time, office location, and phone number (if known) for each user that is currently logged in the system.

Sample Session:

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ $finger ³ ³ Login Name TTY Idle When Office ³ ³ Jwheeler Jim Wheeler ttyp0 16 Wed 10:26 MP ³ ³ mvlsdba Motor Veh Lic rt02190 16 Wed 09:25 d7160 ³ ³ teacher Teacher Acct *rt020b0 Wed 11:07 ³ ³ eholderf Eileen Holder rt021c0 1 Wed 11:03 ³ ³ dbowman Dale Bowman rt01150 Wed 08:58 ³ ³ $ ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ Workshop 1

This workshop will reinforce your understanding of the ideas presented in Chapter 1. Each student is to complete the entire workshop.

DESK EXERCISES

1. What two organizations first developed UNIX?

2. In what high level programming language is UNIX written?

3. What are some characteristics of UNIX?

4. What is Encore Computer Corporations implementation of UNIX

     called?

5. What part of UNIX controls the details of the computer's

     internal operations?

6. What part of UNIX allows the user to communicate with the

     computer? 
                                Continue on the next page

7. What is the name of the tree-like structure under which all

     data is stored?

8. What is the name of the highest level directory?

9. What symbol represents the highest level directory?

10. What is the general syntax of a UNIX command?

11. What is the most common form for listing options on a

     command line? 

12. What character would you use to erase a character on the

     command line?

13. What character terminates the execution of a command?

14. What is the default BourneShell prompt?

15. How can you control the flow of output to your monitor

     screen?

1. What annex command is entered to make a connection to the

     Multimax?

2. What is the UNIX command to change the password?

3. How long is your password valid?

4. How long do you have to wait before changing your password

     again?  Why?

5. What UNIX command is used to logout of the Multimax?

6. What is the command to logout of the annex?

COMPUTER EXERCISES

7. Login to the Multimax

     a.     What did you notice when you entered the password?
     b.     Can you see the password as you enter it?
     c.     What happens if you make a mistake while entering the
            password?

8. What do you see once you have logged in? Write it here.

9. Enter the command which displays the man pages for the man

     command.  (Don't forget to control output to the screen.) 
     The first section is titled "NAME," what are the titles of
     the other sections?

10. What are the options for the man command?

11. Enter the command to find out who (hint) is logged into the

     system.

12. What command will give you more information about the

     current users?  Try it.

13. Logout of the Multimax and the Annex.

2. FILES

In UNIX, all data is organized in files. An ordinary file is a memo, source code program or shell script. A shell script or program source code can be viewed or edited from your terminal. Other files contain binary data, like programs for the kernel; these files cannot be viewed or edited on the terminal.

Peripheral devices such as disks, tape drives, printers, and terminals are also assigned file names. Device files are considered to be special files. They have 'special' characteristics. Although input and output can be redirected to and from a special file, do not attempt to display the contents of a special file on your terminal. 3.1 File Access Modes

File access modes are the protections that can be assigned to files. This protection can protect your files from unauthorized reading or writing. You can even protect your files from yourself (you can prevent accidental deletion).

There are three access modes for files:

     r (read) read, examine, copy data in a file
     w (write) modify, delete a file
     x (execute) use the file as a command

Users with access to a file fall into one of three groups:

     u (user) the file's owner 
     g (group) users in the same group
     o (other) everybody else

The first output field of the ls -l command is a ten character field. Characters two through ten describe the file access modes. A typical access mode listing looks like:

                          rwxr-xr-x

Of the nine columns, the first three describe modes for the file's owner, the next three for his group, and the last three for everyone else. Within each group of three, the first column describes read access mode, the second write, and the third execute. A letter in a column indicates access granted, a dash (-) indicates access denied.

Using the previous example, the user has r (read), w (write), and x (execute) permissions. Members of the user's logical group can read ® or execute (x). Everyone else has read ® and execute (x) permissions, too. The effect of these permissions is that the file's owner is the only one who can modify the file; but everyone can examine, copy, or execute the file. To change access modes on a file or directory, use the chmod command.

ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º Command Format: chmod <access> <file1[filen]> º º º º access - access permissions º º file1[filen] - one or more files to change permissions º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ

Access can be expressed in either of two forms:

  1. with letters: [ugo] [+-=] [rwx]
  1. with numbers: [0-7] [0-7] [0-7]

Let's look at the method of changing the file permissions with letters. The letters u, g, and o represent user, group, and others, respectively. The + (plus) sign means to add the permission and the - (minus) sign means to remove the permission. The = (equal) sign means to set the permissions as shown. Of course, r,w, and x are read, write, and execute.

If, for illustration purposes, we created a file named file1 that had the following permissions:

                   rw-rwxrwx

and you want to give yourself (user) execute permission and take away others' (others' here means group and everyone else) write permissions.

Sample Session:

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ $chmod u+x,g-w,o-w file1 ³ ³ $ ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

Now if we use the ls -la command, and look at the file permissions for file1, they will look like this:

                   rwxr-xr-x

If you want to set several protections at once use the equal sign. The following example will set the permissions for the user to read and execute.

Sample session:

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ $chmod u=rx file1 ³ ³ $ ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

The second method of changing the permissions is to use the octal digits (0-7). The octal digits 0 through 7 are represented in binary in the following manner.

            Octal                Binary    Corresponds to permissions
             0                   000                  ---
             1                   001                  --x
             2                   010                  -w-
             3                   011                  -wx
             4                   100                  r--
             5                   101                  r-x
             6                   110                  rw-
             7                   111                  rwx

Notice that every time a one digit (1) occurs in the binary number the corresponding permissions are also set. Every time a zero (0) occurs, the corresponding permission is denied. So to change the file permissions in the previous example, this is the command to enter:

Sample Session:

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ $chmod 755 file1 ³ ³ $ ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

The first octal digit assigns user permissions of read, write and execute. The second digit assigns the group permission to read and execute. The last digit sets the others permission to read and execute too. 3.2 Listing Contents of Directories

The ls command is used to display file names and their characteristics. Since file names are stored in directories, ls actually reads directory files. Executing ls with no flags or arguments simply lists the names of the files that exist in your current working directory. The initialization files will not be listed.

ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º Command Format: ls [options] [dir1[dirn]] º º º º options - see man pages for a complete list º º º º dir1[dirn] - one or more directory names º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ

The -a flag will cause the hidden (initialization) and all other filenames to be displayed.

The -C flag causes the output to be changed from single-column to multi-column display.

The -F flag adds a character to the end of each displayed filename:

     /      indicates a directory
     *      indicates the file is executable.
 blank      indicates a plain or ordinary file

The -l flag causes detailed information to be printed for files in the directory. This information includes:

     file type (directory, block special, character special,
              fifo special, symbolic link, or ordinary file)
     access modes
     number of links
     ownership  
   group affiliation
     size in bytes
     date and time of last modification
     filename

Without a filename argument, ls displays information about the current working directory. The output is automatically sorted alphabetically by default.

Example:

……………………………………………………….. . $ls . ………………………………………………………..

The following example provides a long listing of the current working directory.

Example:

……………………………………………………….. . $ls -l . ………………………………………………………..

This example shows the ls command with no arguments so it uses the default, the current working directory. The argument could be a relative or absolute directory name.

Sample session:

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ $ls -la ³ ³ total 975 ³ ³ drwxrwxr-x 4 teacher class 2048 Jul 16 17.56 . ³ ³ drwxr-xr-x 60 root 1536 Jul 13 14:18 .. ³ ³ -rwx—— 1 teacher class 4210 May 1 08:27 .profile ³ ³ -rwxr-xr-x 1 teacher class 1948 May 12 13:42 memo ³ ³ $ ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

3.3 File Classifications

The file command will classify files according to their contents.

ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º Command Format: file [options] <file1[filen]> º º º º file1[filen] - one or more filenames to analyze º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ

A few of the classifications that the file command displays are shown below. The results of using the file command are not always correct.

     English text
     ascii text
     c program text
     cannot stat
     commands text
     data
     directory
     empty
     executable

Sample Session:

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ $file speople ³ ³ speople: commands text ³ ³ $file test ³ ³ test: directory ³ ³ $file mail ³ ³ mail: data ³ ³ $ ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

By convention, files beginning with a dot (.) are called initialization files or 'hidden files'. These files describe your environment to the shell. They are sometimes called 'dot files'.

By convention, files that end with:

            
              .c   are C source code programs
              .f   are Fortran source code programs
              .o   are object programs
              .a   are archive files

3.4 Displaying Files

The cat command displays the contents of a file. The command cat is an abbreviation for catenate. This command will read each file in sequence and write it to the monitor screen.

ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º Command Format: cat [options] [file1[filen]] º º º º options - see man pages for a complete list º º º º file1[filen] - one or more file names º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ

If no filename is given, or the argument - is encountered, cat reads from standard input.

Sample session:

……………………………………………………….. . $cat . ………………………………………………………..

This is the simpliest example but not very exciting. The cat command will get its input from the keyboard. Everything that is typed will be displayed on the monitor.

If an argument is given to the cat command that file will be displayed on the monitor.

Sample session:

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ $cat main.c ³ ³ main () ³ ³ { ³ ³ printf ("hello from main!\n\n"); ³ ³ printf ("calling function1!\n\n"); ³ ³ funct1(); ³ ³ printf ("back from function1!\n\n"); ³ ³ printf ("calling function2!\n\n"); ³ ³ funct2(); ³ ³ printf ("that's it!\n\n"); ³ ³ } ³ ³ $ ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ Several files can be displayed on the monitor one after the other by separating the filenames with a space.

Sample session:

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ $cat main.c main.f ³ ³ main () ³ ³ { ³ ³ printf ("hello from main!\n\n"); ³ ³ printf ("calling function1!\n\n"); ³ ³ funct1(); ³ ³ printf ("back from function1!\n\n"); ³ ³ printf ("calling function2!\n\n"); ³ ³ funct2(); ³ ³ printf ("that's it!\n\n"); ³ ³ } ³ ³ program calling ³ ³ write(6,100) ³ ³ 100 format('Hello from main!',/) ³ ³ write(6,110) ³ ³ 110 format(' Calling subroutine1!',/) ³ ³ call sub1 ³ ³ write(6,120) ³ ³ 120 format(t15' Back from subroutine1!',/) ³ ³ write(6,130) ³ ³ 130 format(' Calling subroutine2!',/) ³ ³ call sub2 ³ ³ write(6,140) ³ ³ 140 format(t15' Back from subroutine2!',/) ³ ³ write(6,150) ³ ³ 150 format(' Thats all, folks!') ³ ³ end ³ ³ $ ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

If the file contains more lines than can be displayed on the screen the display will continue to scroll until the last line has been displayed then the prompt will be redisplayed. This can be a problem if you intend to read the text. Be prepared to stop the screen so it can be read. The pg command displays the contents of a file one screen at a time. It allows the user to perform string searches and to scroll backwards.

ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º Command Format: pg [options] [file1[filen]] º º º º options - see man pages for a complete list º º º º file1[filen] - one or more files to paginate º º º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ

Sample session:

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ ³ ³ $pg memo ³ ³ What's Happening ³ ³ by Pam Hajny ³ ³ Denver Office ³ ³ ³ ³ With IRM Training: ³ ³ ³ . A Reclamation-wide workshop was held in early October to . . . . .

³ three groups; CYBER, VAX, and other (PC/LAN, scientific, ³ ³ : ³ ³ ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

Twenty three lines of the file will appear and the : (colon) prompt will appear on the last line. To have the next twenty three line of the file appear, simply press (Ret). If you don't want to see anymore of the file, enter a q (for quit) and the shell prompt will be redisplayed. The following UNIX command is useful for viewing the end of a file without having to display the entire file.

ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º Command Format: tail [options] [file1] º º º º options - see man pages for a complete list º º º º file1 - the file to display, if none is given use º º standard input º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ

The tail command displays the last 10 lines of file by default. The tail command accepts a -N flag to display the last N lines.

Sample Session:

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ $tail memo ³ ³ data communication between the ASC IBM and other Reclamation computers. ³ ³ Asynchronous communication can be accomplished with the same terminals ³ ³ we use for other computer tasks, over the same lines and through the MICOM ³ ³ port selectors. Currently, host-to-host communications is accomplished ³ ³ over a line between the IBM and the CYBERs. The software that supports ³ ³ this communication is called NJEF. Although the capability has been there ³ ³ for some time, we have recently been working with ASC personnel to ³ ³ improve its reliability and accessibility. For CYBER users, there is ³ ³ an NJEF Users' Guide available which can be requested through the Hotline ³ ³ (303) 236-4567. ³ ³ $ ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ 3.5 Removing Files

The rm command will remove the entries for one or more files from a directory. If an entry was the last link to the file, the file will be destroyed. Removal of a file requires write permission to the directory itself, but neither read nor write permission to the file itself. The format for the rm command is:

ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º Command Format: rm [options] <file1[filen]> º º º º options - see man pages for a complete list º º º º file1[filen] - one or more files to remove º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ

Sample session:

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ $ls ³ ³ memo ³ ³ tdata ³ ³ subdir ³ ³ $rm memo ³ ³ $ls ³ ³ tdata ³ ³ subdir ³ ³ $ ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

The file memo has been deleted from the current working directory. Multiple files can be deleted by separating the filenames with a space.

Sample session:

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ $ls ³ ³ memo ³ ³ tdata ³ ³ subdir ³ ³ $rm memo tdata ³ ³ $ls ³ ³ subdir ³ ³ $ ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ 3.6 Printing Files

The lp command routes a file to a printer.

ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º Command Format: lp [-d<dest>] [-n<number>] [file1[filen]] º º º º dest - destination (default set by administrator) º º º º number - number of copies (default is 1) º º º º file1[filen] - one or more files to be printed º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ

If no file name is mentioned the standard input is assumed. The filename dash (-) stands for standard input and may be supplied in conjunction with named files. The order in which the filenames appear is the order in which they will be printed.

The printers in Denver have the following destination names:

     Mannesman 910 laser printer - mtlzr
     Mannesman 600 line printer  - mt_600  (Denver default)

If no specific printer is given the default printer will be selected. The following example will print one copy (default) of the file called test_285 to the line printer (default).

Sample session:

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ $lp test_285 ³ ³ request id is mt_600-1271 (1 file) ³ ³ $ ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

It is possible to specify the printer as shown in the following example. In this case, we specified the default printer.

Sample Session:

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ $lp -dmt_600 test_286 ³ ³ request id is mt_600-1272 (1 file) ³ ³ $ ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

To print two copies of a file called test_287 on the laser printer in Building 53 in Denver, enter the following command:

Sample Session:

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ $lp -dmtlzr -n2 test_287 ³ ³ request id is mtlzr-1273 (1 file) ³ ³ $ ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ 3.7 Print Status

The lpstat command will print information about the current status of the printer system.

ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º Command Format: lpstat [options] º º º º options - see man pages for a complete list º º º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ

If no options are given, the lpstat command will print the status of all requests made to lp by the user.

Sample Session:

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ $lpstat ³ ³ mtlzr-1274 teacher 22560 Jul 16 09:05 on mtlzr ³ ³ $ ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

The first field is the remote id of the print job. The username is next and the size (in bytes) of the print file. The date and time are next and finally the name of the printer.

One of the options available is -t. This option will print all of the printer status information.

Sample Session:

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ $lpstat -t ³ ³ scheduler is running ³ ³ system default destination: mt_600 ³ ³ device for mt_600: /dev/rlp000 ³ ³ device for mtlzr: /dev/rt0002 ³ ³ mt_600 accepting requests since Sep 19 16:09 ³ ³ mtlzr accepting requests since Sep 19 16:43 ³ ³ printer mt_600 is idle. enabled since Jul 3 16:52 ³ ³ printer mtlzr is idle. enabled since Jul 3 16:51 ³ ³ $ ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

This is an example of the kinds of information available from the lpstat command. 3.8 Canceling Print Jobs

The cancel command will cancel printer requests made by the lp command. The command line arguments can be either request id's (these are returned by the lp command) or the printer name. If you specify the request id, the cancel command will stop the job even if it is currently printing. If you specify the printer name, the job currently being printed will be canceled. In either case, the cancellation of a request that is currently printing will free the printer to print the next request.

ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º Command Format: cancel <[ids] [printer]> º º º º ids - request ids (returned by lp command) º º º º printer - printer name º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ

Sample Session:

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ $lp -dmt_600 contest ³ ³ request id is mt_600-1280 (1 file) ³ ³ $cancel mt_600-1280 ³ ³ request "mt_600-1280" canceled ³ ³ $ ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ 3.9 Copying Files

A user may make a copy of a file if he has read access to that file. The cp command can be used to copy the contents of one file to another.

ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º Command Format: cp <file1[filen]> <target> º º º º file1[filen] - one or more source files º º º º target - file or dirname º º º º file1 and target cannot be the same and º º if the target is a file its' contents are º º destroyed. º º º º If target is a directory, then the contents º º of the source file(s) is copied to that º º directory. º º º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ

Sample Session:

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ $cp contest memo ³ ³ $ ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

This will cause a copy of the file contest to be made into a file named memo. If memo doesn't exist, it will be created. If it already exists, it will be written over. The cp command is nondestructive; that means that the source file will remain intact.

The cp command can also be used to copy several files into another directory.

Sample Session:

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ $cp file1 file2 /user0/teacher ³ ³ $ ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

A copy of file1 and file2 has been sent to the directory (in this case, the target directory) /user0/teacher. The user of cp will own the newly copied files. 3.10 Moving Files

A user may move a file only if he has write access to that file. The mv (move) command can be used to rename one file.

ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º Command Format: mv <file1[filen]> <target> º º º º file1[filen] - one or more source files º º º º target - file or dirname º º º º file1 and target cannot be the same and º º if the target is a file its' contents are º º destroyed. º º º º If target is a directory, then the contents º º of the source file(s) are moved to that º º directory. º º º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ

Sample Session:

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ $mv contest memo ³ ³ $ ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

This will have the effect of changing the name of the file contest into memo. The permissions on the file will remain the same. The move command is destructive. That means the source file no longer exists.

The mv command can also be use to move files from one directory to another.

Sample Session:

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ $mv file1 file2 /user0/teacher ³ ³ $ ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

The files, file1 and file2, have been sent to the directory /user0/teacher. They have been "moved" and no longer reside in the current directory. The owner remains the same when a file is moved. Workshop 3

This workshop will reinforce your understanding of the topics presented in this chapter. Login to the Multimax using the username and password given to you by the instructor. Each student should complete the entire workshop. You might need to work in a team on the computer exercises.

DESK EXERCISES

1. List four types of files.

2. What does the file command do?

3. The ls command will display the contents of the current

     working directory.  What does the -F option do?

4. What command is used to display the contents of an ordinary

     file?

5. What command would you use to append one file to the end of

     another?

6. What is the lp command?

                                Continue on the next page

7. How can you find out the status of your print job?

8. What command would you enter to cancel a print job called

     mt_600-1131?

9. What command will copy the contents of one file to another?

10. What does mv do?

11. What do the following file protections indicate?

            rwx------
            rwxr-xr-x
  1. ——–
            rwxr--r--
                                Continue on the next page

COMPUTER EXERCISES

12. Log into the Multimax.

13. Execute the file command on the files listed below. Record

     the output in the space provided.
     a.     .profile
     b.     /bin/vax
     c.     /dev/console

14. Which of the above files is readable?

15. Enter the command to display the contents of the current

     working directory.  Hint: ls
     a.     How many files are listed?
     b.     Type ls -a
     c.     How many entries are listed?
                                Continue on the next page
     d.     Which entries were not listed in your original output
            of ls?

16. How does the output of ls -a and ls -Ac differ?

     Try it.

17. How many fields are displayed for each entry when you

     execute ls -l? What are the fields?

18. What are the current permissions on .profile?

19. Change permissions on .profile so that no one (including

     you) has any access to the file.  
     (Hint: Use the chmod command)

20. Without changing the permissions, list the contents of the

     file named .profile to the screen.
     What happened?  Why?
                                Continue on the next page

21. Change the permissions on .profile to

            u - read, write, execute
            g - read
            o - read             

22. Type cat .profile. What happened? Do you know why?

23. Enter pg memo. What does this command do?

24. Send one copy of the file called memo to the laser printer.

25. Logout of the Multimax and the Annex.

                                          NOTES

ÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜ 4. DIRECTORIES

A directory is a file whose sole job is to store file names and related information. All files, whether ordinary, special, or directory, are contained in directories.

The directory in which you find yourself when you first login is called your home directory. You will be doing much of your work in your home directory and subdirectories that you'll be creating to organize your files.

4.1 Absolute/Relative Pathnames

As we saw earlier, directories are arranged in a hierarchy with root (/) at the top. The position of any file within the hierarchy is described by its pathname. Elements of a pathname are separated by a /. A pathname is absolute if it is described in relation to root, so absolute pathnames always begin with a /. These are some example of absolute filenames.

            /etc/passwd
            /users/sjones/chem/notes
            /dev/rdsk/Os3

A pathname can also be relative to your current working directory. Relative pathnames never begin with /. Relative to user sjones' home directory, some pathnames might look like this:

                                                               
            chem/notes
            personal/res

To determine where you are within the filesystem hierarchy at any time, enter the command to print the current working directory.

ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º Command Format: pwd º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ

Sample Session:

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ $pwd ³ ³ /user0/teacher ³ ³ $ ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

Notice that this is an absolute pathname. This is the pathname of the current working directory. 4.2 Creating Directories

Directories are created by the following command:

ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º Command Format: mkdir [options] <dirname> º º º º options - see man pages for a complete list º º º º dirname - name of the new directory (absolute or º º relative pathname). º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ

If the option to change permission mode is not given, the directory will have default permissions set to read,write,execute for the user and read and execute for group and others. The files . (dot) and .. (dot dot) are created automatically. In order to create a sub-directory, you must have write permission on the parent directory. The owner id and the group id are set to the real users id and group id, respectively.

4.3 Removing Directories

Directories can be deleted using the rmdir command.

ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º Command Format: rmdir [options] <dirname> º º º º options - see man pages for a complete list º º º º dirname - the directory to remove, it must be empty. º º º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ

Sample Session:

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ $pwd ³ ³ /user0/teacher ³ ³ $ls -la ³ ³ total 5 ³ ³ drwxr-xr-x 2 teacher class 512 Jul 18 08:12 . ³ ³ drwxrwxr-x 5 root root 2048 Jul 1 13:14 .. ³ ³ $rmdir teacher ³ ³ rmdir:teacher:Directory does not exist ³ ³ $ ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

Normally, directories are deleted using the rmdir command. Before the directory can be removed, it must be empty; that is, it must not contain any files. Notice that in the above example two files are present, . (dot) and .. (dot). Remember, these refer to the current working directory and its parent. They cannot be removed. Sample Session:

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ $rmdir . ³ ³ rmdir: .: Can't remove current directory or .. ³ ³ $ ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

For the purposes of deleting a directory, the directory is empty if it contains only two files, namely . (dot) and .. (dot dot). 4.4 Changing Directories

To "move around" in the filesystem, use the cd (change directory) command.

ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º Command Format: cd [dirname] º º º º dirname - If not specified, the value of the $HOME º º shell variable will be used as the new º º current working directory. º º º º If the directory given is an absolute pathname º º that directory is the new current working º º directory. A relative pathname can also be º º given. º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ

Sample Session:

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ $cd /user0/teacher ³ ³ $pwd ³ ³ /user0/teacher ³ ³ $ ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

The current working directory is now /user0/teacher.

Sample Session:

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ $cd memos ³ ³ $pwd ³ ³ /user0/teacher/memos ³ ³ $ ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

This command will look for a subdirectory called memos under the current working directory. If it is found, it will become the new working directory; otherwise, an error will occur.

Error messages beginning with "cannot access file…" often indicate that the pathname is incorrect or misspelled. 4.5 Renaming Directories

The mv (move) command can also be used to rename a directory.

ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º Command Format: mv <dirname> <target> º º º º dirname - name of the source directory º º target - target directory name º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ

Sample Session:

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ $mv users newusers ³ ³ $ ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

This will have the effect of changing the name of the directory users into newusers. The permissions on the directory will remain the same.

NOTE: All files and subdirectories in the directory newusers

            now have new absolute pathnames. 

4.6 The directories . (dot) and .. (dot dot)

The filename . (dot) represents the current working directory; and the filename .. (dot dot) represent the directory one level above the current working directory, often referred to as the parent directory. If we enter the command to show a listing of the current working directories files and use the -a option to list all the files and the -l option provides the long listing, this is the result.

Sample Session:

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ $ls -la ³ ³ total 975 ³ ³ drwxrwxr-x 4 teacher class 2048 Jul 16 17.56 . ³ ³ drwxr-xr-x 60 root 1536 Jul 13 14:18 .. ³ ³ ———- 1 teacher class 4210 May 1 08:27 .profile ³ ³ -rwxr-xr-x 1 teacher class 1948 May 12 13:42 memo ³ ³ $ ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

The ls -la command displays access modes, number of links, the owner, the group, size, etc. of files in a directory; but also displays the characteristics of the current working directory and its parent. The first entry is the entry for the current directory. The owner is teacher and the group is class. The second entry is the parent directory. It is one level up from the current working directory. It is owned by the root directory.

Instead of asking for information on all of the files in a directory, you can request just the information on the current working directory.

Sample Session:

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ $ls -ld ³ ³ drwxrwxr-x 4 teacher class 2048 Jul 16 17:56 . ³ ³ $ ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

The response from the command simply shows the long information for the current working directory . (dot). Information can also be obtained for the parent of the current working directory by using its name as an argument.

Sample Session:

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ $ls -ld .. ³ ³ drwxr-xr-x 60 root root 1536 Jul 13 14:18 .. ³ ³ $ ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

Here's the long list of the current working directories parent. (.. is the shorthand representation of the current working directories parent)

Both of the directory names . (dot) and .. (dot dot) can be used as arguments to commands. To change the parent of the current working directory into the current working directory, the command is:

Sample Session:

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ $pwd ³ ³ /user0/teacher ³ ³ $cd .. ³ ³ $pwd ³ ³ /user0 ³ ³ $ ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

The current working directory is the former parent.

This is all very interesting but what good is it? You can specify the current working directory or its parent without typing the entire absolute pathname. It can also be handy when giving arguments to UNIX commands.

Why are the pathnames sjones/chem and ./sjones/chem equivalent? 4.7 Directory Access Modes

Directory access modes are listed and organized in the same manner as any other file. There are a few differences that need to be mentioned.

4.7.1 Read

Access to a directory means that the user can read the contents. The user can look at the filenames inside the directory.

4.7.2 Write

Access means that the user can add or delete files to the contents of the directory.

4.7.3 Execute

Executing a directory doesn't really make a lot of sense so think of this as a traverse permission. This access allows the user to reference the directory name in a command. The reference is not necessarily explicit, since the shell deduces the absolute pathname of a command from the user's environment. For example, the shell knows that the full pathname of the ls command is /bin/ls. A user must have execute access to the bin directory in order to execute ls.

If traverse permissions are denied, others cannot change to it or through it. Another user can't do a cd to the protected directory or any subdirectory beneath it.

                                                                 IN CLASS QUIZ
                                                                  ÚÄÄÄÄÄÄÄÄ¿
                                                                  ³ /      ³  
                                                                  ÀÄÄÄÄÂÄÄÄÙ                                                                       
                                                                       ³ 
                          ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
                          ³              ³              ³                          ³              ³              ³
                     ÚÄÄÄÄÁÄÄÄÄÄ¿   ÚÄÄÄÄÁÄÄÄÄ¿    ÚÄÄÄÄÁÄÄÄÄ¿                ÚÄÄÄÄÁÄÄÄÄ¿    ÚÄÄÄÄÁÄÄÄÄ¿    ÚÄÄÄÄÁÄÄÄÄ¿  
                     ³   bin    ³   ³   tmp   ³    ³   etc   ³                ³   mnt   ³    ³   lib   ³    ³   dev   ³  
                     ÀÄÄÄÄÄÄÄÄÄÄÙ   ÀÄÄÄÄÄÄÄÄÄÙ    ÀÄÄÄÄÄÄÄÄÄÙ                ÀÄÄÄÄÂÄÄÄÄÙ    ÀÄÄÄÄÄÄÄÄÄÙ    ÀÄÄÄÄÄÄÄÄÄÙ  
                                                                                   ³          
                 ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
                 ³                                      ³                                  ³                                  ³
           ÚÄÄÄÄÄÁÄÄÄÄÄ¿                           ÚÄÄÄÄÁÄÄÄÄ¿                        ÚÄÄÄÄÁÄÄÄÄ¿                        ÚÄÄÄÄÁÄÄÄÄ¿
           ³   Uni1    ³                           ³  Uni2   ³                        ³  Uni3   ³                        ³  Uni4   ³
           ÀÄÄÄÄÄÂÄÄÄÄÄÙ                           ÀÄÄÄÄÂÄÄÄÄÙ                        ÀÄÄÄÄÂÄÄÄÄÙ                        ÀÄÄÄÄÂÄÄÄÄÙ  

{1} ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄ¿ ÚÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄ¿ ÚÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄ¿ ÚÄÄÄÄÄÄÁÄÄÄÄÄ¿ ÚÄÄÄÄÁÄÄÄÄÄ¿ ÚÄÄÄÄÄÁÄÄÄÄÄ¿ ÚÄÄÄÄÁÄÄÄÄ¿ ÚÄÄÄÄÄÁÄÄÄÄÄ¿ ÚÄÄÄÄÄÁÄÄÄÄÄ¿ ÚÄÄÄÄÁÄÄÄÄ¿ ÚÄÄÄÄÁÄÄÄÄ¿ ÚÄÄÄÄÁÄÄÄÄ¿ ÚÄÄÄÄÁÄÄÄÄ¿ ÚÄÄÄÄÁÄÄÄÄ¿ ³ filea ³ ³ fileb ³ ³ Dira ³ ³ filea ³ ³ Filea ³ ³ file1 ³ ³ File2 ³ ³ file3 ³{5} ³ Dir1 ³ ³ Dir2 ³ ÀÄÄÄÄÄÄÄÄÄÄÙ ÀÄÄÄÄÄÄÄÄÄÄÄÙ ÀÄÄÄÄÂÄÄÄÄÙ ÀÄÄÄÄÄÄÄÄÄÄÄÙ ÀÄÄÄÄÄÂÄÄÄÄÄÙ ÀÄÄÄÄÄÄÄÄÄÙ ÀÄÄÄÄÂÄÄÄÄÙ ÀÄÄÄÄÄÄÄÄÄÙ ÀÄÄÄÄÄÂÄÄÄÙ ÀÄÄÄÄÂÄÄÄÄÙ

                              ³                                  ³                         ³                            ³           ³ 
   ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄ´                                  ³                         ³               ÚÄÄÄÄÄÄÄÄÄÄÄÄ´           ³

ÚÄÄÄÄÁÄÄÄÄÄ¿ ÚÄÄÄÄÄÁÄÄÄÄÄ¿ ÚÄÄÄÄÁÄÄÄÄ¿ ÚÄÄÄÄÄÁÄÄÄÄÄ¿ ÚÄÄÄÄÁÄÄÄÄ¿ ÚÄÄÄÄÁÄÄÄÄ¿ ÚÄÄÄÄÁÄÄÄÄ¿ ÚÄÄÄÄÁÄÄÄÄ¿ ³ filea ³ ³ Dirb ³ ³ fileb ³ {2} {3} ³ filea ³ ³ Filea ³ {6}³ File1a ³ ³ file1b ³ ³ Dir2a ³ ÀÄÄÄÄÄÄÄÄÄÄÙ ÀÄÄÄÄÄÄÄÄÄÄÄÙ ÀÄÄÄÄÄÄÄÄÄÙ ÀÄÄÄÄÄÄÄÄÄÄÄÙ ÀÄÄÄÄÂÄÄÄÄÙ ÀÄÄÄÄÄÄÄÄÄÙ ÀÄÄÄÄÄÄÄÄÄÙ ÀÄÄÄÄÂÄÄÄÄÙ

                                                                                           ³                                        ³

Write the complete pathname for the 5. ÚÄÄÄÄÁÄÄÄÄ¿ ÚÄÄÄÄÄÄÁÄÄÄÄÄÄ¿ {7} files numbered above. {4} ³ filea ³ ÚÄÄÄÄÁÄÄÄÄ¿ ÚÄÄÄÄÁÄÄÄÄ¿

                                      6.  ________________________________            ÀÄÄÄÄÄÄÄÄÄÙ                       ³ File2aa ³   ³ file2ab ³

1. _ 8. You are in /mnt/Uni1 and want #1. ÀÄÄÄÄÄÄÄÄÄÙ ÀÄÄÄÄÄÄÄÄÄÙ 7. 2. _ 3. _ Write the minimum pathname needed for 9. You are in /mnt/Uni3/File2 and want #4

                                      each of the following:                        

4. _ 4.7.4 Typical Root Directory

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ $ ls -FC / ³ ³ ³ ³ ³ ³ Student/ bin/ lib/ stand/ u2/ user2/ ³ ³ ³ ³ Students/ bad/ lisp/ tmp/ unix* usr/ ³ ³ ³ ³ Support/ dev/ lost+found/ tmp.sh unix.bak* usr2/ ³ ³ ³ ³ etc/ mnt/ tmp1/ unix.test* usr3/ a.out* ³ ³ ³ ³ foo rel_notes tmp2/ user0/ install/ shlib/ ³ ³ ³ ³ u1/ user1/ ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

                                          NOTES

ÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜ Workshop 4

This workshop will reinforce your understanding of the topics presented in this chapter. Login to the Multimax using the username and password from the previous workshop. All students should complete the entire workshop. You may need to work in a team on the computer exercises.

DESK EXERCISES

1. What is a directory?

2. What is an absolute path name?

3. What is a relative path name?

4. What command will create a directory?

5. What command will remove a directory?

6. What command is used to change from one directory to

     another?

7. How would you change the name of a directory?

                                Continue on the next page

8. What do the files . (dot) and .. (dot dot) represent?

9. What does execute permission on a directory mean?

COMPUTER EXERCISES

10. Login to the Multimax.

11. What is the absolute pathname of your current working

     directory? Hint: pwd

12. Type cd etc

     What message do you get? Can you explain why?

13. Type cd /etc

     What is your current working directory?  Why did this
     happen?

14. Enter the command that will return you to your home

     directory.
                                Continue on the next page

15. Enter the command that will change to your current working

     directories parent.

16. List the contents of your current working directory

17. List the permissions, ownership, size, etc. of your current

     directories parent.

18. Enter the command to change to your home directory. Create

     a new subdirectory with a name of your choice.

19. Change the current working directory to the subdirectory you

     just created.

20. Rename the subdirectory to Student. Is this the same

     subdirectory as everyone else in the class?  Why?

21. Change to your home directory and delete the subdirectory

     Student.

22. Logout of the Multimax and the Annex.

                                          NOTES

ÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜ 5. COMMUNICATION UTILITIES

This chapter will deal with the utilities that allow one user to communicate with another. Some of these utilities require the other user to be logged in and others do not.

The mail utility can be used to send messages to one or more users. It is not necessary for the user that is receiving the message to be logged in. The mail utility delivers the message to a file belonging to the recipient. The user will be notified that a mail message exists. Messages can be saved or deleted and a reply sent.

The talk utility is an interactive session that allows each user to send message simultaneously to each other. Both users must be currently logged in for this utility to work.

The write utility is a one-way communication. It allows you to send a message to another user. The user must be logged in and no reply is possible.

5.1 Sending Electronic Mail

The basic command line format for sending mail is:

ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º Command Format: mailx [options] [user1[usern]] º º º º options - see man pages for a complete list º º º º user1[usern] - one or more users to get the mail º º message º º º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ

The username is the name assigned by the system administrator to a user on the UNIX system (for example, rharding). The username can also include a system name if the recipient is on another UNIX system that can communicate with the sender's (for example, sys2!rharding). Let's assume that the recipient is on the local UNIX system.

Sample Session:

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ $mailx rharding(Ret) ³ ³ Subject: ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

Now enter the subject of your message followed by a (Ret). The cursor will appear on the next line. Simply start typing the message. There is no limit to the length of a message. When you have finished, send it by typing Ctrl-D on a new line.

Sample Session:

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ $mailx rharding(Ret) ³ ³ Subject: Work schedule(Ret) ³ ³ Please check the bulletin board(Ret) ³ ³ for the new work schedule.(Ret) ³ ³ Ctrl-D ³ ³ $ ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

The shell prompt on the last line indicates that the message has been queued (placed in a waiting line) and will be sent. 5.2 Reading Mail

To read your mail enter:

Example:

……………………………………………………….. . $mailx . ………………………………………………………..

Executing this command places you in the command mode of mailx. If there are no mail messages waiting to be read, you will see the following message on the screen:

Sample Session:

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ $mailx ³ ³ No mail for teacher ³ ³ $ ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

Of course, your username will appear instead of 'teacher'.

When a mail message appears in the recipient's mailbox, the following message will appear on the screen.

Example:

……………………………………………………….. . you have mail . ………………………………………………………..

This notice will appear when you login to the system or upon return to the shell from another procedure. When you have been notified of mail waiting to be read, enter the command to enter mail. The screen will look something like this:

Sample Session:

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ $mailx ³ ³ ³ ³ mailx version 3.1 Type ? for help. ³ ³ "/usr/mail/teacher": 3 messages 3 new ³ ³ >N 1 bhood Fri Jul 13 13:01 21/324 Review session³ ³ N 2 class2 Fri Jul 13 14:53 15/211 Meeting notice³ ³ N 3 phajny Fri Jul 13 16:53 11/272 Reorganization³ ³ ? ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

This first line indicates the version of mailx that is being used. In this case, version 3.1. There is a reminder that help is available by typing the ?. The second line shows the path name of the file used as input (usually the same as the username) and a count of the total number of messages and their status. The messages are numbered in sequence with the latest one received on the bottom of the list. To the left of the sequence numbers, there may be a status indicator; N for new, U for unread. The > symbol points to the current message. The other fields in the header line show the login of the sender, day, date, and time it was delivered. The next field has the number of lines and characters in the message. The last field is the subject of the message; it might be blank.

To read the mail messages you can do any of the following steps:

(Ret) - This will cause the current message to

                                 be displayed.  The current message is
                                 the once indicated by the > sign.

p (Ret) - This is equivalent to pressing the (Ret)

                                 key with no argument.  The current
                                 message will be displayed.

p 2 (Ret) - You can press p (for print) or t (for

                                 type) followed by the message number(s).

p teacher (Ret) - This will print all messages from user

                                 teacher.

5.3 Saving Mail

All messages that are not specifically deleted are saved when quitting mailx. Messages that have been saved are placed in a file in the home directory called mbox. The mbox file is the default. It is possible to save them in a file of the users choice. Messages that have not been read are held in the mailbox. The command to save messages comes in two forms.

ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º Command Format: S [msglist] º º º º msglist = º º º º n message number n the current message º º º º ^ the first undeleted message º º º º $ the last message º º º º * all messages º º º º n-m an inclusive range of message numbers º º º º user all messages from user º º º º /string All messages with string in the subject line º º (case is ignored) º º º º :c all messages of type c where c is: º º º º d - deleted messages º º n - new messages º º o - old messages º º r - read messages º º u - unread messages º º º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ Messages specified by the msglist argument are saved in a file in the current directory named for the author of the first message in the list. If the username 'teacher' sent the message and you entered:

Sample Session:

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ ? S * ³ ³ "teacher" [New file] 11/268 ³ ³ ? ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

The mail message has been saved into a file in your current directory called 'teacher'. If you want to save the file in another filename, you can do that with the second method of saving mail. Basically, it works the same as S; but it allows you to save the mail to a file you specify.

ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º Command Format: s [msglist] [file1] º º º º msglist - same arguments as before º º º º file1 - filename which will receive the saved mail º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ 5.4 Deleting Mail

To delete a message, enter a d at the command mode prompt followed by a msglist argument. An msglist argument can be any one the following:

     n             message number n the current message
     ^             the first undeleted message
     $             the last message
  • all messages
     n-m           an inclusive range of message numbers
     user          all messages from user
     /string       All messages with string in the subject line (case
                   is ignored)

:c all messages of type c where c is:

                          d - deleted messages
                          n - new messages
                          o - old messages
                          r - read messages
                          u - unread messages

For example, suppose you wanted to delete all of your mail messages. Enter the following command at the command mode prompt. The command mode prompt for mailx is the question mark (?).

Sample Session:

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ $mailx ³ ³ ³ ³ mailx version 3.1 Type ? for help. ³ ³ "/usr/mail/teacher": 3 messages 3 new ³ ³ >N 1 bhood Fri Jul 13 13:01 21/324 Review session ³ ³ N 2 class2 Fri Jul 13 14:53 15/211 Meeting notice ³ ³ N 3 phajny Fri Jul 13 16:53 11/272 Reorganization ³ ³ ? d * ³ ³ ? q ³ ³ $ ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

All of the messages have now been deleted. The messages are not actually deleted until the mailbox is exited. Until that happens the u (for undelete) command is available. Once the quit command (q) is entered, however, the deleted messages are gone. 5.5 Undeliverable Mail

If there has been an error in the recipient's username, the mail command will not be able to deliver the message. For example, let's say you misspelled the username. It will return the mail in a message that includes the system name and username of the sender and recipient. It also includes a message stating the reason for the failure.

The sender of the message would get a message from mailx indicating that an error had occurred.

Sample Session:

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ $mailx ³ ³ ³ ³ mailx version 3.1 Type ? for help. ³ ³ "/usr/mail/teacher": 1 message 1 new ³ ³ >N 1 teacher Fri Jul 13 13:45 25/655 Returned mail:User unkno³ ³ ? ³ ³ Message 1: ³ ³ From teacher Fri Jul 13 13:45:57 1990 ³ ³ Received: by domax1.UUCP (5.51/) ³ ³ id AA01997; Fri, 13 Jul 90 13:45:54 mdt ³ ³ Date: Fri, 13 Jul 90 13:45:54 mdt ³ ³ From: Mail Delivery Subsystem <MAILER-DAEMON> ³ ³ Subject: Returned mail: User unknown ³ ³ Message-Id: 9007131945.AA01997@domax1.UUCP ³ ³ To: teacher ³ ³ Status: R ³ ³ ³ ³ —– Transcript of session follows —– ³ ³ 550 snoopy… User unknown: No such file or directory ³ ³ ³ ³ —– Unsent message follows —– ³ ³ Received: by domax1.UUCP (5.51/) ³ ³ id AA01995; Fri, 13 Jul 90 13:45:54 mdt ³ ³ Date: Fri, 13 Jul 90 13:45:54 mdt ³ ³ From: Teacher Account D-7130 <teacher> ³ ³ Message-Id: 9007131945.AA01995@domax1.UUCP ³ ³ To: snoopy ³ ³ Subject: Meeting notice ³ ³ ³ ³ Meeting will be held at Charlie Brown's house. ³ ³ July 13, 1990 ³ ³ 7:30 p.m. ³ ³ ³ ³ ? ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

The ? is the mailx command mode prompt. Mailx is asking for input.

A list of commands available can be shown by entering a ?.

Sample Session:

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ ? ? ³ ³ mailx commands ³ ³ type [msglist] print messages ³ ³ next goto and type next message ³ ³ edit [msglist] edit messages ³ ³ from [msglist] give header lines of messages ³ ³ delete [msglist] delete messages ³ ³ undelete [msglist] restore deleted messages ³ ³ save [msglist] file append messages to file ³ ³ reply [message] reply to message, including all recipients ³ ³ Reply [msglist] reply to the authors of the messages ³ ³ preserve [msglist] preserve messages in mailbox ³ ³ mail user mail to specific user ³ ³ quit quit, preserving unread messages ³ ³ xit quit, preserving all messages ³ ³ header print page of active message headers ³ ³ ! shell escape ³ ³ cd [directory] chdir to directory or home if none given ³ ³ list list all commands (no explanations) ³ ³ top [msglist] print top 5 lines of messages ³ ³ z [-] display next [last] page of 10 headers ³ ³ ³ ³ [msglist] is optional and specifies messages by number, author, ³ ³ or type. ³ ³ The default is the current message. ³ ³ ? ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

This is a partial list of mailx commands available to you. We will not discuss all of them. If you are interested in the other features, you can use the on-line manual pages to find out how to use them. 5.6 Talk Utility

Talk is a visual communication program which copies lines from one terminal to that of another user. This is similar to the phone utility on VMS. Once communication is established between two users, they can both type simultaneously with their output appearing in separate windows.

ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º Command Format: talk <user1> [ttyname] º º º º user1 - If you are talking to someone on the same machine, º º then this is just the person's username. If º º you want to talk to a user on another host, then º º user1 is of the form: º º º º host!user or º º host.user or º º host:user or º º user@host º º º º user@host being preferred º º º º ttyname - If the person you want to talk to is logged on º º more than once, you can use the ttyname argument º º to indicate the terminal name. º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ

For illustration, let's assume we want to talk with the user student on the same machine. The command is:

Example originator:

……………………………………………………….. . $talk student . ………………………………………………………..

Example recipient:

……………………………………………………….. . Message from Talk_Daemon@domax1 at 17:36 … . . talk: connection requested by teacher@domax1. . . talk: respond with: talk teacher@domax1 . ……………………………………………………….. When the recipient has typed in talk teacher@domax1, the following message will appear on the originators screen:

Sample Session originator:

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ Connection established. ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

The screen will be divided in half by a row of dash characters. The originator will type a message on the top half, and the same message will appear on the lower half of the screen on the recipient's screen.

Likewise, everything the recipient types on the top of his screen the same message will appear on the bottom of the originators screen. Once this communication is established, the parties may type simultaneously with their output appearing in different windows. While in talk, Ctrl-L will cause the screen to be reprinted, and the erase and kill characters work as you would expect.

Sample Session originator:

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ Hi Snoopy, ³ ³ Charlie Brown suggests we meet at noon today. ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³————————————————————– ³ ³ OK, but the billiard championship is in my house at 1 P.M. ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ Sample session recipient:

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ OK, but the billiard championship is in my house at 1 P.M. ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³————————————————————– ³ ³ Hi Snoopy, ³ ³ Charlie Brown suggests we meet at noon today. ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

When the communication is finished, the interrupt character will cause the talk utility to exit.

Example:

……………………………………………………….. . [Connection closing. Exiting] . ……………………………………………………….. 5.7 Talk Permission Denied

If you don't wish to have your work interrupted by a request to establish a talk connection, you can deny messages.

ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º Command Format: mesg [-[n][y]] º º º º n - no, forbids messages via write by revoking non-user º º write permission on the user's terminal. º º º º y - yes, reinstates permission º º º º º º mesg with no arguments will report the current state º º without changing it. º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ

Sample Session:

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ $mesg ³ ³ is y ³ ³ $mesg -n ³ ³ $mesg ³ ³ is n ³ ³ $mesg -y ³ ³ $mesg ³ ³ is y ³ ³ $ ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

The default permission is enabled. Some UNIX commands, however, disallow messages in order to prevent messy output. 5.8 Write Utility

This command will write a message to the screen of another user.

ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º Command Format: write <user1> [ttyname] º º º º user1 - username of the user º º º º ttyname - which terminal to send (i.e. tty00) º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ

Sample Session originator:

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ $write lucy ³ ³ Hello Lucy, ³ ³ What's the latest from the Psychology Department? ³ ³ (interrupt character) ³ ³ $ ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

Sample Session recipient:

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ $ ³ ³ ³ ³ Message from teacher on domax1 (rt021d0) [ Thu Jul 19 13:43:12 ] .. ³ ³ Hello Lucy, ³ ³ What's the latest from the Psychology Department? ³ ³ <EOT> ³ ³ ³ ³ $ ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

Here's a suggestion for using write to communicate a little easier.

When the user first 'writes' to another user, wait for the recipient to 'write' back before starting to send. Both users should agree on a signal to indicate to the other person that they can reply. How about 'o' for over. The signal 'oo' could be used for "over and out," which would mean that the communication is finished.

                                          NOTES

ÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜ Workshop 5

This workshop will reinforce your understanding of the topics covered in this chapter. Login to the Multimax with the username and password given to you by the instructor. Each student is to complete the entire workshop. Computer exercises might need to be worked as a team.

DESK EXERCISES

1. What is the command to send an electronic mail message to

     another user on the Multimax?

2. Once you have entered the mail utility what command can you

     enter to get help?

3. What does the command d 5-9 accomplish?

4. What is the command to exit the mail utility and return to

     the UNIX system prompt?

5. What is the mailx command mode prompt?

6. How would you create a "talk" session to user Student2 on

     the host domax0?

7. What time does the billiard championship start?

                                Continue on the next page

8. What UNIX command will prevent interruption of your work by

     someone wishing to "talk"?

9. Regarding "write", does the recipient need to be logged in?

     Regarding "talk", does the recipient need to be logged in?
                                Continue on the next page

COMPUTER EXERCISES

10. Login to the Multimax.

11. Send a mail message to another student in the class.

     How can you find out who is logged in?  (who?)
     Does the recipient need to be logged in?

12. Send a mail message to username lucy. (lucy does not exist)

     What happened?  Why?

13. Read your mail and save one message to the current working

     directory. 
     Delete all other mail messages.
                                Continue on the next page

14. Establish a talk connection with another student.

15. What UNIX command do you enter to deny permission for a talk

     connection?  Try it!

16. Send a message to another student using the write command.

     How is this different from "talk?" 

17. Logout of the Multimax and the Annex.

6. SHELL BASICS

There have been several shells written for UNIX. They have different features and each is in use through out the world. The BourneShell is the accepted standard for System V UNIX. Another shell is called the Cshell, named for "C" which is the high-level programming language. Another shell is the KornShell; it is named after the person who developed it, David Korn. It has more features than the BourneShell and is of special interest to programmers.

The purpose of this chapter is to give you some idea as to the functions available through the shells and their general function. Details of shell programming are discussed in another class, "UNIX Bourne Shell Programming".

UMAX makes full use of the ASCII character set. Unlike operating system command languages like VMS or NOS, UNIX is case sensitive. In addition, several characters have special meanings to the shell. We have already seen that a slash (/) by itself indicates the root directory and is used with directory, subdirectory, and filenames to indicate an absolute or relative pathname.

Other special characters that have meaning to the shell include:

            `    '    $    {    }    ||    &&    ;

Input to a command is usually taken from your keyboard, and the output of a command is normally displayed on your monitor screen. Keyboard input is referred to as "standard input" or "stdin," and screen output as "standard output" or "stdout." 6.1 Input Redirection

It is possible to instruct UNIX to get data from a file rather than from the keyboard. This is called input redirection. To indicate that input to a command is to come from a file rather than the keyboard, use the input redirection character (<).

ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º Command Format: command < input-file1 º º º º command - a command º º º º input-file1 - input file that supplies input º º to the command º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ

A Memory Trick: The less-than symbol looks like a funnel. If

                          you pour liquid into the wide end, it flows
                          to the narrow end.  The input-file "pours"
                          its contents into the command.

Sample Session:

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ $mailx phajny < report ³ ³ $ ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

The file named report will be sent to the login name phajny. Mail normally expects the input to come from standard input, the keyboard. The input redirection symbol causes the input to mail to come from the file called report. 6.2 Output Redirection

It is also possible to instruct UNIX to send data to a file rather than sending it to the default monitor screen. This is called output redirection. To indicate that the output from a command is to go into a file rather than be displayed on the monitor screen, use the output redirection character >.

ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º Command Format: command > output-file1 º º º º command - a command º º º º output-file1 - output file that will receive the output º º from the command º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ

The memory trick still works; only now the funnel points toward the file that will receive the output.

Sample Session:

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ $ls -l > listing ³ ³ $ ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

The output of the ls command will not be displayed on the screen, instead it will be in the file named listing. If the file does not exist, the shell will create it. If it already exists, it will be overwritten.

WARNING: The shell will NOT issue a warning about overwriting

            the original file.

It is possible to use the cat command to create a file and input text into that file using output redirection. The following example shows how this can be done.

Sample session:

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ $cat > file1 ³ ³ This is a line of text. ³ ³ This is another line of text. ³ ³ (Ctrl-D) ³ ³ $cat file1 ³ ³ This is a line of text. ³ ³ This is another line of text. ³ ³ $ ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ 6.3 Output Redirection with Append

The following shell command will also redirect the output to a file but instead of overwriting the existing file, it will append the output to the end of output-file.

ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º Command Format: command » output-file1 º º º º command - a command º º º º output-file1 - receives the output from command º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ

Believe it or not, the memory trick still works; only in this case, one funnel feeds onto another. So the output is fed onto the end of output-file. Okay, it's a little far fetched; but it can help you remember. Try it.

Sample Session:

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ $ls -l subdir » listing ³ ³ $ ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

This will append the output of the ls command to the file listing without destroying any existing data. If the file does not exist, the shell will create it.

Again, it's possible to append text to the end of an existing file using the cat command. Note the following example.

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ $cat » file1 ³ ³ This is a third line of text. ³ ³ This is a fourth line of text. ³ ³ (Ctrl-D) ³ ³ $cat file1 ³ ³ This is a line of text. ³ ³ This is another line of text. ³ ³ This is a third line of text. ³ ³ This is a fourth line of text. ³ ³ $ ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

If the file does not exist it will be created and the text added.

6.4 Input and Output Redirection

Input and output redirection can occur on the same command line.

ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º Command Format: command < input-file1 > output-file1 º º º º command - A command º º input-file1 - supplies input to command º º output-file1 - receives the output from command º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ

Sample Session:

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ $cat command_file ³ ³ p ³ ³ $mailx < command_file > result_file ³ ³ ³ ³ $cat result_file ³ ³ mailx version 3.1 Type ? for help. ³ ³ "/usr/mail/teacher": 1 message 1 new ³ ³ >N 1 teacher Mon Dec 31 10:16 57/3171 ³ ³ Message 1: ³ ³ From teacher Mon Dec 31 10:16:30 1990 ³ ³ Received: by domax1.UUCP (5.51/) ³ ³ id AA18976; Mon, 31 Dec 90 10:16:28 mst ³ ³ Date: Mon, 31 Dec 90 10:16:28 mst ³ ³ From: Teacher Account D-7130 <teacher> ³ ³ Message-Id: 9012311716.AA18976@domax1.UUCP ³ ³ To: teacher ³ ³ Status: R ³ ³ ³ ³ What's Happening ³ ³ by Pam Hajny ³ ³ Denver Office ³ ³ ³ ³ With IRM Training: ³ ³ ³ ³ A Reclamation-wide workshop was held in early October to discuss information ³ ³ resources management training. Trainers from each region and the Denver Offic³ ³ shared training techniques, ideas and course materials. We met one afternoon ³ ³ with the personnel training officers to discuss broad IRM training needs and ³ . . . . . .

6.5 Pipes

The output of a command can be used as the input to a second command by using the "pipe" symbol (|) without using any temporary files. On some terminals the pipe symbol is a vertical bar and on others it is a broken vertical bar. Both will work exactly the same. The following command format shows how to use the pipe symbol:

ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º Command Format: command1 | command2 º º º º command1 - a command º º º º command2 - a second command º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ

Example:

……………………………………………………….. . $man acct | pg . ………………………………………………………..

The output from the command man are processed by the pg command before appearing on your screen. Normally the output from the man command will appear on the monitor line after line until the end is reached. In this case, the output is "piped" to the pg command; and the screen will stop scrolling after 23 lines so you can read them. 6.6 Wildcards

Wildcards are special characters that cause the shell to search over a range of possible values.

? represents any one character, while

* stands for any number of characters including none.

Example:

                                         jo?eph

This indicates that the third letter of the string "jo eph" could be any single character. Any character could be substituted for the ? character, including numeric and special characters.

To limit the range of possible values, enclose the possibilities in brackets [ ].

Example:

                                       jo[a-z]eph

This example limits the range of characters to the set lowercase a through lowercase z. Uppercase characters, numeric, or special characters would not make a match. Notice that only one charater will make a match.

Using a comma as a separator between choices we can further restrict the range.

Example:

                                      jo[s,m,5]eph

The only set of characters that will make a match are lowercase s, lowercase m, and the number 5. No other character will make a match.

The string jos* causes the shell to look for every string that begins with the letters "jos," regardless of their length while [i-k]*h finds every string that begins with "i", "j", or "k" and ends with an "h".

Wildcards are extremely useful in wide variety of applications. For example, if you want to use the man pages, but do not know the exact command names on the subject of system accounting, try

Sample Session:

……………………………………………………….. . $man acc* . ………………………………………………………..

All of the commands that begin with the letters acc followed by any string (including none) will be passed to the man command as arguments.

If you wanted to get a listing of all the files in your current working directory that ended in .c (these are the C source code programs). You could enter the following command:

Sample Session:

……………………………………………………….. . $ls *.c . ……………………………………………………….. In order for the shell to stop interpretation of a special character (i.e., use it as a normal character), it must be preceded by a backslash (\) or enclosed in single quotes.

Example:

                                         jo\?eph
                                           or
                                        'jo?eph'

Both of these examples represent the string jo?eph. The shell will not interpret the question mark character as a wildcard metacharacter.

6.7 Reestablishing a Background Job

Processes in UNIX can run in the foreground or the background. Foreground processes are interactive; the input is read from the keyboard or standard in, and the out goes to the monitor screen or standard out. Background jobs run with no interaction with an interactive terminal. Your current interactive process can be suspended by typing the break character at the shell prompt.

Sample Session:

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ $ <break> ³ ³ annex: ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

The jobs command displays information on all current jobs (sessions). The most recent job is marked with a plus sign (+), and the next previous is marked with a dash or minus sign (-). A job begins when you execute a command to connect to a host (or another Annex). A job ends when you logout from the host or terminate the job at the Annex with the kill or hangup command.

The number of possible jobs allowed per user is determined by the network administrator. The number of jobs can range from 1 to 16 with a default of 3. The Annex command to display the information about the current job(s) is:

ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º Command Format: jobs º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ

If there are no jobs, the annex: prompt will be displayed. If there are some 'suspended' jobs the following will appear:

Sample Session:

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ annex: jobs ³ ³ +1 rlogin domax1 ³ ³ -2 rlogin domax1 ³ ³ annex: ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

This shows that there are two jobs in suspension. Both of these sessions did a remote login to domax1. This is just for illustration. The fg (foreground) command returns to a suspended job. The command displays the job number and the Annex command that created it. When no arguments are provided, fg will return to the most recent job. With a numeric argument, fg returns the specified job.

To connect with a suspended job (session) enter the following Annex command:

ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º Command Format: fg [n] º º º º (none) - most recent job (+) to foreground º º n - job "n" to foreground º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ

Sample Session:

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ annex: jobs ³ ³ +1 rlogin domax1 ³ ³ -2 rlogin domax1 ³ ³ annex:fg 1 ³ ³ 1 rlogin domax1 ³ ³ (Ret) ³ ³ $ ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

                                          NOTES

ÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜ Workshop 6

This workshop will reinforce your understanding of the topics covered in this chapter. Login to the Multimax with the username and password given to you by the instructor. Each student is to complete the entire workshop. Computer exercises might need to be worked as a team.

DESK EXERCISES

1. What is the meaning of the term "case sensitive?"

2. What is a wildcard?

3. How does the shell interpret the following wildcards?

     a.     ?
     b.     [0-9]
     c.     *

4. How does the shell interpret the following strings?

     a.     M[i,r]*
     b.     b?ll
     c.     me??[1,2]
     d.     '*special*'
     e.     anyone\?
                                Continue on the next page

5. What is "standard input?"

6. What symbol causes a command to take its input from a file?

7. What is "standard output?"

8. What symbol causes the output of a command to be redirected

     to a file?

9. What symbol causes the output of a command to be redirected

     to the input of another command?

10. What symbol is used to indicate input is to be from a file

     instead of the keyboard?

11. How can the output from a command be saved in an ordinary

     file?
                                Continue on the next page

12. What is a pipe? No, it's not something you smoke.

COMPUTER EXERCISES

13. Login to the Multimax

14. How many different on-line manual entries are displayed by

     executing the command man ca*?

15. Execute man ls | pg. What is the purpose of the |

     character?

16. Save the on-line manual pages on the cat command in a file

     called mp0. (hint: output redirection)

17. Save the on-line manual pages on the assist command in a

     file called mp1. (no hint this time)

18. Type cp mp0 man

     Does file mp0 still exist after this command is executed? 
     Why?
                                Continue on the next page

19. Type mv mp1 assist

     Does file mp1 still exist after this command is executed?
     Why?

20. Type cp mp3 man

     What error message do you get?

21. Logout of the Multimax and the Annex. 7. UMAX FILE TRANSFER PROTOCOL (FTP)

File Transfer Protocol (FTP) is a utility which can transfer files to and from TCP/IP networked computers. TCP/IP stands for Transmission Control Protocol/Internet Protocol and consists of a suite of defacto standard protocols for networking computers. FTP is one protocol in that suite. (Other significant protocols within TCP/IP are TELNET, Simple Mail Transfer Protocol (SMTP), and Network File Systems (NFS).) The Client portion of UNIX FTP lets users on the Multimax access file systems on a remote computer. The Server portion of UNIX FTP lets users on remote computers access Multimax files. For Reclamation, these remote computers would be VAXes, CYBERs, IBMs, and Sun workstations.

Using FTP, you can access directories and files on a remote computer and perform common operations, such as list and change working directories, transfer files, create directories, delete working directories, delete files and directories, and rename files and directories. Once you have entered the FTP utility, you make a connection to the desired remote computer and then work with the remote computer's files using FTP commands. The connection to the remote computer's FTP remains in effect until terminated by the user. Multimax FTP supports both local help for FTP commands and remote help, which displays FTP elements available on the remote computer.

Throughout this chapter, the term "local computer" will refer to the Multimax. The term "remote computer" will refer to the CYBER mainframe or the VAX minicomputer. Please be aware that these procedures will work for any computer connected to the Ethernet that has an FTP server installed. The messages that appear may be different, but the process will be the same. 7.1 Initializing FTP on UMAX

FTP can be invoked on the Multimax using the following syntax:

ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º º º Command Format: ftp [options] [host] º º º º options - see man pages for a complete list º º º º host - the name of the remote computer º º º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ

NOTE: UNIX is case sensitive. The commands and options must

            be entered as shown.  

7.2 Establishing Connection with the Remote Computer

There are two ways to make a connection with the remote computer.

7.2.1 Calling FTP with no hostname

The first way is to invoke FTP using no options, simply enter the ftp command at the shell prompt. UMAX will respond with the ftp prompt: ftp>

Sample Session:

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ $ftp ³ ³ ftp> ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

FTP commands can now be entered. The utility has its own set of commands, and we will discuss about 12 of them in this chapter. A complete list of the FTP commands can be obtained by entering help at the FTP prompt.

The command to establish a connection with remote computer is:

ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º º º Command Format: open <host> [port] º º º º host - hostname, this host must have an FTP server. º º º º port - port number (optional) º º º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ

This command will establish a connection to the remote computer's FTP server. The hostname for the VAX is ERC830. The following FTP command will establish a connection with the VAX (ERC830):

VAX Sample Session:

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ ftp>open erc830 ³ ³ Connected to erc830. ³ ³ 220 erc830 Wollongong FTP Server (Version 5.0) at Mon Dec 4 ³ ³ Name (ERC830:rharding): ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ The cursor will stop after the colon. FTP is waiting for you to enter the login name to use when signing on to the remote computer. FTP tries to help you out by giving you a default login name. In the above example, the default login name is rharding. To select the default name, press (Ret). You can enter any login name you want and then press (Ret). After you have selected the login name, either by choosing the default or entering a new name, you will be asked for the password.

VAX Sample Session:

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ 331 Password required for rharding. ³ ³ Password: ³ ³ 230 User logged in, default directory D_1131:[RHARDING] ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

Enter the password required for the login name that you specified. Echoing is disabled and the password you enter will not be displayed on the screen. If you entered the correct password, message number 230 will show you are logged in and the default directory on the remote system. You are now logged into the remote computer system and can proceed to transfer files.

CYBER Sample Session:

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ $ftp ³ ³ ftp>open cy2 ³ ³ Connected to cy2. ³ ³ 220 SERVICE READY FOR NEW USER. ³ ³ Name (cy2:rharding): class8 ³ ³ 331 USER NAME OKAY, NEED PASSWORD. ³ ³ Password: secret ³ ³ 230 USER LOGGED IN, PROCEED. ³ ³ ftp> ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

This example for the CYBER is similar to the VAX example. Notice that there a few differences. The login name was changed from rharding and the username class8 was entered instead. 7.2.2 Calling FTP with a hostname

The second method of signing on to the remote computer is to specify the name of the remote computer on the call to ftp.

VAX Sample Session:

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ $ftp erc830 ³ ³ 220 erc830 Wollongong FTP Server (Version 5.0) at Fri Dec ³ ³ Name (ERC830:rharding): ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ You can now enter the username for the remote system, and you will then be prompted for the password. The effect of specifying the hostname on the ftp command line is to do an "automatic" open command.

NOTE: The messages are slightly different from the VAX login.

            The login for the CYBER works in a similar manner.

7.3 Local Computer Commands

From the FTP prompt, you can issue commands to the local computer to display files or show the contents of a directory. The commands you enter are FTP commands; and although they might resemble UNIX commands, they are NOT UNIX commands.

The FTP command to transfer file(s) from the remote computer to the local computer is as follows:

ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º º º Command Format: get <remote-file> [local-file] º º º º remote-file - the filename on the remote computer º º º º local-file - the filename on the local computer º º º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ

This FTP command will retrieve the remote-file and store it on the Multimax. If the local-file name is not specified, the name of the file on the Multimax will be the same as it was on the remote computer. The current settings for type, form, mode, and structure will be used during the file transfer.

VAX Sample Session:

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ ftp>get overview.dat ³ ³ 200 PORT Command OK. ³ ³ 125 File transfer started correctly ³ ³ 226 File transfer completed ok ³ ³ local: overview.dat remote: overview.dat ³ ³ 884 bytes received in 0.04 seconds (22 Kbytes/s) ³ ³ ftp> ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

Messages 200, 125, and 226 let you know that the file transferred properly. The next line shows the local-filename, in this case we didn't specify the local-filename, so the remote-filename and the local-filename are the same. The next line shows the number of bytes transferred and the amount of time it took to transfer the file. CYBER Sample Session:

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ ftp>get prolog8 ³ ³ 220 COMMAND OKAY. ³ ³ 150 FILE STATUS OKAY; ABOUT TO OPEN DATA CONNECTION. ³ ³ 226 CLOSING DATA CONNECTION. ³ ³ local: prolog8 remote: prolog8 ³ ³ 41 bytes received in 0.8 seconds (0.05 Kbytes/s) ³ ³ ftp> ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ 7.3.1 Changing the Local Directory

The directory on the local computer can be changed to any directory you desire. This is called the working directory. This is the directory where files that are transferred from the remote computer will be stored.

The syntax of the command to change local working directory is as follows:

ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º º º Command Format: lcd [dirname] º º º º dirname - the name of the new local working directory º º º º if directory is omitted, the home directory is assumed º º º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ

Sample Session:

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ ftp>lcd /user0/student0 ³ ³ Local directory now /user0/student0 ³ ³ ftp> ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

Absolute or relative pathnames can be specified for directory. 7.3.2 Listing the Contents

Any UNIX command can be entered from the FTP utility. You must preface the command with the FTP command that invokes the interactive shell.

The syntax to invoke the interactive shell is as follows:

ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º º º Command Format: ! [command [arguments]] º º º º command - any valid UNIX command, if omitted the º º interactive shell is invoked º º º º arguments - if supplied are arguments to the UNIX command º º º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ

If arguments are provided, the first argument is considered to be the UNIX command and the remaining arguments are considered to be arguments to that command.

Example:

……………………………………………………….. . ftp>!ls -la . ………………………………………………………..

This command will display the contents of the local working directory. The l option specifies the 'long' listing, and the a option requests all files including the initialization files. 7.4 Remote Computer Commands

From the FTP prompt, you can issue commands to the remote computer to display files or show the contents of the remote directory. Recall that the commands you enter are FTP commands; and although they look like UNIX commands, they are not.

Transferring file(s) from the Multimax to the remote computer is accomplished with the following command:

ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º º º Command Format: put <local-file> [remote-file] º º º º local-file - the filename on the local computer º º º º remote-file - the filename on the remote computer º º º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ

This FTP command will retrieve the local-file, transfer it to the remote computer, and store it in the remote directory. If the remote-file is not specified, the name of the file on the remote computer will be the same as it was on the Multimax. The current settings for type, form, mode, and structure will be used during the file transfer.

VAX sample sessions:

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ ftp>put memo ³ ³ 200 PORT Command OK. ³ ³ 125 File transfer started correctly ³ ³ 226 File transfer completed ok ³ ³ local: memo remote: memo ³ ³ 2299 bytes sent in 0.08 seconds (28 Kbytes/s) ³ ³ ftp> ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

Messages 200, 125, and 226 let you know that the file transferred properly. The next line shows the local-filename. In this case, we didn't specify the local-filename, so the local-filename and the remote-filename are the same. The next line shows the number of bytes sent and the amount of time for the transfer. CYBER Sample Session:

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ ftp>put memo ³ ³ 200 COMMAND OKAY. ³ ³ 150 FILE STATUS OKAY; ABOUT TO OPEN DATA CONNECTION. ³ ³ 226 CLOSING DATA CONNECTION. ³ ³ local:memo remote:memo ³ ³ 2299 bytes sent in 0.08 seconds (28 Kbytes/s) ³ ³ ftp> ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ 7.4.1 Changing the Remote Directory

The directory on the remote computer can be changed to any directory you want. This is called the remote working directory. This is the directory where files that are sent from the Multimax will be stored.

The syntax for the command to change remote working directory is as follows:

ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º º º Command Format: cd <remote-dirname> º º º º remote-dirname - the name of the new remote working º º directory º º º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ

VAX Sample Session:

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ ftp>cd d_1131:[gholdaway] ³ ³ 200 Working directory changed to D_1131:[GHOLDAWAY] ³ ³ ftp> ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

You must specify a valid directory on the remote computer.

CYBER Example:

……………………………………………………….. . 502 COMMAND NOT IMPLEMENTED. . ………………………………………………………..

The reason this command is not implemented on the CYBER is because NOS does not support the idea of directories. 7.4.2 Listing the Contents

ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º º º Command Format: ls [remote-dirname] [local-file] º º º º remote-dirname - working directory on remote computer º º º º local-file - local file where the remote-directory º º contents will be written. If omitted, º º the output is sent to the screen. º º º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ

VAX Sample Session:

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ ftp>ls ³ ³ 200 PORT Command OK. ³ ³ 125 File transfer started correctly ³ ³ login.com;13 ³ ³ jeff.;1 ³ ³ test.com;1 ³ ³ 226 File transfer completed ok ³ ³ 228 bytes received in 0.06 seconds (0.34 Kbytes/s) ³ ³ ftp> ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

Since no remote directory was specified, the contents of the current working directory is transferred and no local file was specified, so the output is displayed on the screen.

CYBER Sample Session:

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ ftp>ls ³ ³ 200 COMMAND OKAY. ³ ³ 150 FILE STATUS OKAY; ABOUT TO OPEN DATA CONNECTION. ³ ³ PROLOG8 ³ ³ FSEP1A ³ ³ FSEP1 ³ ³ FSEP2 ³ ³ 226 CLOSING DATA CONNECTION. ³ ³ 52 bytes received in 1 seconds (0.05 Kbytes/s) ³ ³ ftp> ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ 7.5 Closing the Connection

The current FTP session with the remote server can be terminated without leaving FTP. When the current session is terminated a session to another remote FTP server can be initiated.

ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º Command Format: close º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ

This command will terminate the current FTP session with the remote server and return to the FTP command interpreter.

VAX Sample Session:

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ ftp>close ³ ³ 221 Goodbye. ³ ³ ftp> ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

CYBER Sample Session:

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ ftp>close ³ ³ 221 SERVICE CLOSING CONTROL CONNECTION. LOGGED OUT. ³ ³ ftp> ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ 7.6 Exiting FTP

When you have finished using FTP, the following command will terminate FTP and return control to the shell.

ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º Command Format: quit º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ

This command will terminate the current FTP session and exit FTP.

VAX Sample Session:

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ ftp>quit ³ ³ 221 Goodbye. ³ ³ $ ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

CYBER Sample Session:

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ ftp>quit ³ ³ 221 SERVICE CLOSING CONTROL CONNECTION. LOGGED OUT. ³ ³ $ ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ 7.7 Special FTP Commands

This section will discuss some FTP commands that are useful in using FTP. They include an on-line help, status, and the ! character.

The help command will display all of the FTP commands on the screen.

ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º º º Command Format: help [command] º º º º command - an FTP command º º º º if omitted, prints a list of all known commands º º º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ

Sample Session:

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ ftp>help get ³ ³ get receive file ³ ³ ftp> ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

There is a synonym for the help command. It works in the same way as the help command.

ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º Command Format: ? [command] º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ

Sample Session:

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ ftp>? put ³ ³ put send one file ³ ³ ftp> ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ FTP status can be displayed on the screen by entering the following command:

ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º Command Format: status º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ

Sample Session:

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ ftp>status ³ ³ Connected to ERC830. ³ ³ No proxy connection. ³ ³ Mode: stream; Type: ascii; Form: non-print; Structure: file ³ ³ Verbose: on; Bell: off; Prompting: on; Globbing: on ³ ³ Store unique: off; Receive unique: off ³ ³ Case: off; CR stripping: on ³ ³ Ntrans: off ³ ³ Nmap: off ³ ³ Hash mark printing: off; Use of PORT cmds: on ³ ³ ftp> ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

These are the default settings. The meaning of these settings and how to change them are found in the supplemental material at the end of this manual.

There are a few "bugs" in FTP.

Correct execution of many FTP commands depends upon the remote server. The VAX server is supplied by The Wollongong Group, Inc. If you encounter problems transferring files to/from the Multimax, please bring them to the attention of the User Support Branch or call the Hotline (FTS 776-4688 or 6-HOTT). 7.8 Introducing UMAX TELNET

TELNET protocol will allow communication with another host. The TELNET protocol can be invoked from either the Annex prompt or from the shell prompt while you are logged into the Multimax. If you invoke TELNET while logged into the Multimax, that session will continue to be charged at the appropriate rate. The new session to another host will also charge the account. This means you are paying connect charges on both systems.

The syntax to invoke TELNET is as follows:

ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º º º Command Format: telnet [host [port]] º º º º host - the host name º º º º port - the port number, if not given, use default º º º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ

Sample Session:

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ $telnet ³ ³ telnet> ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

The telnet> prompt indicates that telnet commands can now be entered. If no parameters are given, telnet enters the command mode.

In order to create a connection to another host from command mode, use the open command.

ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º Command format: open <host> [port] º º º º host - host name º º º º port - port number, optional º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ Sample session:

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ telnet>open erc830 ³ ³ Trying… ³ ³ Connected to erc830. ³ ³ Escape character is '^]'. ³ ³ ³ ³ (Warning message from VAX) ³ ³ ³ ³ Username: ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

If you enter the host name on the same command line as telnet, the open command will be done for you.

Sample Session:

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ $telnet erc830 ³ ³ Trying… ³ ³ Connected to erc830. ³ ³ Escape character is '^]'. ³ ³ ³ ³ ( Warning message from VAX) ³ ³ ³ ³ Username: ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

When you logout of the destination host, you will be automatically brought back to the originating host.

Sample Session:

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ $lo ³ ³ Connection closed by foreign host .L-1990 15:57:42.19 ³ ³ $ ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ The first $ prompt is the VMS prompt. The lo command logs you out of the VAX. Notice that we get the connection closed message, and the next $ prompt is back to the Multimax. The connection that was created was closed. There is a TELNET command to close the connection as well.

ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º Command Format: close º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ

This TELNET command will close the connection and return to the TELNET command mode.

To exit TELNET, enter the following command at the telnet> prompt.

ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º Command Format: quit º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ

This command will close any open TELNET session and exit TELNET. An end-of-file (in command mode) will also close a session and exit.

The current status of TELNET can be shown by entering the following command:

ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º Command Format: status º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ

Sample Session:

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ telnet>status ³ ³ Connected to erc830. ³ ³ Operating in character-at-a-time mode. ³ ³ Escape character is '^]'. ³ ³ ³ ³ telnet> ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ A listing of TELNET commands can be displayed by entering the following command at the TELNET command mode prompt telnet>:

ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º Command Format: help º º º º ? º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ

Sample Session:

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ telnet>help ³ ³ Commands may be abbreviated. Commands are: ³ ³ ³ ³ close close current connection ³ ³ display display operating parameters ³ ³ mode try to enter line-by-line or char-at-a-time mode ³ ³ open connect to a site ³ ³ quit exit telnet ³ ³ send transmit special characters ('send ?' for more) ³ ³ set set operating parameters ('set ?' for more) ³ ³ status print status information ³ ³ toggle toggle operating parameters ('toggle ?' for more) ³ ³ z suspend telnet ³ ³ ? print help information ³ ³ telnet> ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ Workshop 7

This workshop will reinforce your understanding of the topics covered in this chapter. Login to the Multimax with the username and password given to you by the instructor. Each student is to complete the entire workshop. Computer exercises might need to be worked as a team.

COMPUTER EXERCISES

1. Log into the Multimax.

Questions 2 through 11 have to do with a connection between the local computer (Multimax) and the remote computer (VAX).

2. Initialize FTP on the Multimax and create a connection to

     the VAX.  (Hint: open)
     What is the remote computer default username? 
     How can you enter a different username? 

3. What files are on the remote computer's directory?

     (Hint: If you can't remember the FTP command, how can you                           
     find out?)

4. What is the default type? (Hint: status)

                                Continue on the next page

5. Transfer the file "memo" from the Multimax to the VAX.

     Change the name of the file on the VAX to "memo.doc". 

6. Transfer the file "DATA.MAY" from the VAX to the Multimax.

     Keep the same filename on both platforms.

7. Without entering it, what FTP command would you enter to

     change the remote computer working directory to
     D_1131:[STUDENT]? 

8. Enter the FTP command to list the contents of the local

     computer working directory. What files are present?

9. Enter the FTP command to list the contents of the remote

     computer working directory. What files are present?

10. Without entering the command, how would you change the

     remote working directory to D_1131:[STUDENT1]?

11. What changes would you have to make in order to

     transfer a binary file from the Multimax to the VAX?
                                Continue on the next page
                                       ** NOTE **

Questions 12 through 20 have to do with a connection between the local computer (Multimax) and the remote computer (CYBER).

12. Close the connection with the VAX and then open a connection

     to the CYBER.

13. What files are on the remote computer's directory?

14. What is the default type? (Hint: status)

15. Transfer the file "memo" from the Multimax to the CYBER.

     Change the name on the CYBER to a filename of your choice.

16. Transfer the file "MAYDATA" from the CYBER to the Multimax.

     Keep the same filename on both platforms.

17. Without entering it, what FTP command would you enter to

     change the remote computer working directory?

18. Enter the FTP command to list the contents of the local

     computer working directory.
                                Continue on the next page

19. Enter the FTP command to list the contents of the remote

     computer working directory.

20. Close the connection with the CYBER and exit FTP.

                                Continue on the next page
                                       ** NOTE **

The following questions have to do with your understanding of the Telnet communications protocol.

21. Enter the command to invoke the Telnet protocol.

22. Open a connection to the VAX.

23. Enter a valid username and password.

24. Are you logged into the VAX or the Multimax?

25. Enter the command to exit the VAX. (Hint: logoff)

26. Are you logged into the VAX or the Multimax?

27. Are you confused? Logout of the Multimax and the Annex.

                                          NOTES

ÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜ 8. INTRODUCTION TO vi

The vi editor was developed at the University of California, Berkeley. It was originally included as part of BSD UNIX. It became an official part of AT&T UNIX with the release of System V. Before vi was invented, the standard UNIX editor was ed. The ed editor was line oriented and made it difficult to see the context of the file being edited.

The next progression was an editor called ex. The ex editor had some distinct advantages over ed. It allowed you to display an entire screen of text instead of just one line at a time. While in the ex editor, you could give the command vi (for visual mode). Users used the visual mode so much that developers of ex made it possible to use the display editing feature without having to enter ex and then vi. They called the new facility simply vi.

The vi editor does its work in a work buffer. When you start vi, it copies the disk file into the work buffer. During the editing session, changes are made to this copy. The contents of the disk file are not changed until you write the contents of the work buffer to the disk file.

The command to enter the vi editor is:

ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º Command Format: vi <file1> º º º º file1 - the filename to edit º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ

Your screen is cleared, then the first lines of the file are displayed, and the cursor is positioned at the top of the screen. The bottom line of your screen is reserved for certain command mode activities and for error and status messages and does not contain any of the file's text. If the file already exists, the bottom line lists the filename in quotes and the number of lines and characters it contains. If the file is new, "New file" is displayed next to the filename. If the file does not fill an entire screen, a tilde (~) character appears in the leftmost column of any blank lines.

By default, you are always in command mode at the start of a vi session. The most common command mode activities are:

     cursor positioning
     entering text mode
     moving, copying, and deleting text
     storing changes
     quitting

Whenever you wish to return to command mode, or are unsure of what mode you are in, press the Esc key.

Esc can be entered any number of times without harm. The Esc key on the VT terminals is the Ctrl-3 combination. On the PC, it is the key marked Esc. 8.1 vi: Cursor Positioning

Below is a list of cursor positioning commands. Characters are not echoed on your screen when one of these commands is executed. The cursor simply moves to the desired location. If a command is not accepted, the cursor remains where it is. The current line is defined as the line on which the cursor currently resides. The letter N is a repeat factor.

N+ move down N lines from current line. The cursor can be

            anyplace on the current line.  When complete, the
            cursor will be located at the first character on the
            line N lines down from the current line.

N- move up N lines from current line. The cursor can be

            anyplace on the current line.  When complete, the
            cursor will be located on the first character on the
            line located N lines up from the current line.

(Ret) The cursor can be located anyplace on the current line.

            The will be on the first character of the next line.

$ The cursor will move to the end of the current line

NG This command will move the cursor to line N. Default

            is to move to the last line.

Ctrl-D move down 1/2 screen (11 lines)

Ctrl-U move up 1/2 screen (11 lines)

NOTE: Words are delimited by spaces (ie., a word

            begins and ends with a space).

Nw The cursor will be on the first character of the word

            located N words from the current word.  The current
            word is the word where the cursor is located.  The
            default is to skip to the beginning of the next word.

Nb The cursor will be on the first character of the word

            located N words back from the current word.  The
            default is to skip back to the beginning of the
            previous word.

e The cursor will skip to the end of the current word. The following keys are also defined for moving around the screen:

h back one space

j down one line

k up one line

l forward one space

The arrow keys will also work.

CAUTION NOTE: If you hold the arrow key down to move quickly to

                   another area of the text, a line might be inserted
                   into your file.

8.2 vi: Text Mode

Several commands in command mode allow you to enter text. Once the command is entered, all other characters that you type are inserted in your text until you press the Esc key.

To add text, use:

I enter text mode, additional text appears at the beginning of

     the current line.

i enter text mode, additional text appears before the current

     cursor position.

A enter text mode, additional text appears at the end of the

     current line.

a enter text mode, additional text appears after the current

     position.

O enter text mode, open a line above the current line.

o enter text mode, open a line below the current line.

To replace text, use:

R replace characters until Esc

r replace one character at current cursor position, then

     return to command mode

To substitute text, use:

Ns substitute character for the current N characters until

     Esc.  Default is to substitute for the current
     character until Esc.

8.3 vi: Deleting Text

vi commands for deleting text take effect relative to the cursor's current position. Text deletion commands are not echoed on your screen.

Ndd delete N lines starting at the current line. The

     default is to delete the current line.

Ndw delete N words starting with the current word. The

     default is to delete the current word.

Nx delete N characters starting at the current cursor

     position.  The default is to delete one character.

D delete remainder of line 8.4 vi: Copying Text

Copying text is performed using one of the "yank and put" command pairs. The most straight forward command sequence for copying is:

     1.     Yank a word, line, or number of lines.  A copy of the
            yanked text is stored invisibly.  The original text is 
            not disturbed.
     2.     Move the cursor to the desired location.
     3.     Put the yanked copy into place.
     4.     Move the cursor to the next block of text you want to                         
            copy, then go to step 1.

Here are some yank and put commands:

NY yank N lines. Default is to yank one line.

Nyw yank N words. Default is to yank one word.

P put yanked lines above current cursor position

                                           or 
     put yanked words before current cursor position

p put yanked lines below current cursor position

                                           or
     put yanked words after current cursor position

8.5 vi: Moving Text

Moving text from one area to another can be accomplished in several different ways. You can use whichever method is the easiest for you to remember.

     1.     Yank, put, and delete:
            a.     Yank the desired text.
            b.     Move the cursor to the new location and then "put"
                   the "yanked" text into its new location.
            c.     Move the cursor back to the original text and      
                   delete it.
                                           or
     2.     Delete and put:
            a.     Delete the desired text 
            b.     Move the cursor to the new location
            c.     Use a put command to add the text.

NOTE: The delete command stores an invisible copy

            of the deleted text in a buffer.  This is
            done so the undo command is capable of
            restoring the previous command.  That's why
            it is possible to move that deleted text to
            another area.

8.6 vi: Restoring the Last Change

The Undo command will reverse the last command you just entered. It will restore text that you have changed or deleted by mistake. The undo command will undo only the most recently changed text.

ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º Command Format: u º º º º u - undo the last change º º º º U - restore the current line to the way it was before you º º started changing it, even if several changes were made º º º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ

If you delete a line and then change a word, undo will restore the changed word but will not restore the line. 8.7 vi: Recovering Text After a Crash

You can often recover text that would have been lost because of a system crash. When the system has been brought back up enter the following command to see if the system saved a copy of your work buffer:

Example:

……………………………………………………….. . $vi -r filename . ………………………………………………………..

If your work buffer was saved, you will be editing a recent copy of the work buffer. Use the w command to write the edited version to the disk file.

The -r option will recover the version of filename that was in the buffer when the crash occurred. If no buffer was saved, the editor will assume you are going to edit a new empty file called filename. 8.8 vi: Saving Text and Quitting

Commands to save (write) text and to quit are entered from the Last Line Mode. The Last Line Mode is entered by entering a colon (:) character from the command mode.

To save changes without exiting vi, enter:

Example:

……………………………………………………….. . :w . ………………………………………………………..

This command is displayed on the status line as it is typed in. The commands are executed by pressing the Enter key. The file's name and number of lines and characters are displayed on the status line. With no option, the work buffer will be written back to the original disk file. If, for some reason, you don't have write permission to the working directory, you can copy the work buffer to another file by specifying the complete pathname of a temporary file.

Example:

……………………………………………………….. . :w /user0/rharding/temp . ………………………………………………………..

Now you can exit vi and not lose any of your work. The editing session is saved in the file /user/rharding/temp.

To exit vi without saving any of the changes since the last :w (or to discard all changes if no :w), enter:

Example:

……………………………………………………….. . :q! . ………………………………………………………..

The exclamation mark (!) (in slang, it's a bang) indicates to quit the current editing session, regardless. If you just enter q alone, the editor will warn you that existing changes were not saved. It is difficult to get out of this mode. Use the exclamation mark to indicate do the exit no matter what and not save the changes since the last w command. To save and quit, enter:

Example:

……………………………………………………….. . :wq . ………………………………………………………..

The w command will write the work buffer to the disk file. The q command will exit the editor. The shell prompt ($) will be displayed after the file has been saved and the editor exited. 8.9 Other vi Commands

To save the file you are editing under a different name, use:

Example:

……………………………………………………….. . :w newfile . ………………………………………………………..

To copy in the contents of another file, position the cursor on the last line you want to be above the new text, then execute:

Example:

……………………………………………………….. . :r filename . ………………………………………………………..

The contents of filename will appear on your screen below the last cursor position. The existing text will be moved down.

To include the output of a shell command (i.e., date) in the file you are editing, position the cursor as described above, then enter:

Example:

……………………………………………………….. . :r !shell-cmd . ………………………………………………………..

To execute a shell command without including its output in your file, enter:

Example:

……………………………………………………….. . :!shell-cmd . ………………………………………………………..

This feature enables you to check man pages or the contents of other files without exiting vi.

                                          NOTES

ÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜ Workshop 8

This workshop will reinforce your understanding of the topics covered in this chapter. Login to the Multimax with the username and password given to you by the instructor. Each student is to complete the entire workshop. Computer exercises might need to be worked as a team.

1. Login to the Multimax.

2. Edit the file rocket.sh .

   (Hint: vi rocket.sh)

3. Position the cursor at the beginning of line 10.

4. Move the cursor up five lines.

5. Move the cursor to the end of the current line.

     What vi command did you use?

6. Move the cursor to the first line of the file.

     What vi command did you use?

7. Move to the end of the file and insert a new line after it

     that contains the following text:
     fi

8. Remove all the blank lines from this file.

                                Continue on the next page

9. Locate the word grop and change it to grep .

10. Add the following text after the last line of the file.

     rm ./temp$$

11. Now execute the script by typing rocket.sh

     (Hint: What are the permissions on this file?)
     If you did the editing correctly fireworks should appear. If 
     not, compare your script to /user0/teacher/rocket.sh
     To stop the fireworks enter the interrupt character (CTRL-C)

12. Create a file with a name of your own choice. Insert the

     output from the UNIX command ls -la .                   Save your change and
     exit vi.

13. Edit the file you just created. Go to the end of the file

     and without leaving vi, display a listing of the directory 
     /user0/teacher. How do you return to the editing session?
     Did the listing get inserted into your editing session?

13. What is the option to recover your changes after a system

     crash?

14. Logout of the Multimax and the Annex. 9. GETTING HELP

9.1 Assist

The assist command is a menu driven utility that can provide information on the following topics:

     1.     Information on a variety of UNIX topics
     2.     Tutorials
     3.     The ability to construct and execute command lines
     4.     A "pop up" menu for advanced users

Assist is set up so you do not have to know the exact command name in order to get information or use the command. To execute assist enter:

ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º Command Format: assist [name] º º assist [-s] º º assist [-c name] º º º º name - invoke an assist-supported UNIX system or º º walkthru for name. º º º º -s - reinvoke the assist setup module to check or º º modify the terminal variable. º º º º -c name - invoke the version of name that is in the º º current directory. º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ Sample session:

……………………………………………………….. . $assist . ………………………………………………………..

The first time assist is executed, assist will automatically check your terminal capabilities and then runs a brief tutorial. You can run the tutorial again by entering:

Sample session:

……………………………………………………….. . $assist -s . ………………………………………………………..

This command will also allow you to recheck your terminal setup.

The following is a list of useful assist commands:

     Ctrl-A               -      assist help
     Ctrl-O               -      help with current menu
     Ctrl-Y               -      help with current menu item
     Ctrl-T               -      call top level menu
     Ctrl-F               -      call "pop up" menu
     Ctrl-R               -      go back to previous menu
     (Ret),Ctrl-N         -      move cursor to next menu item
     Ctrl-P               -      return cursor to previous item
     
     Ctrl-G               -      select (execute) current menu item
     Ctrl-V               -      clear help message or prompt
     
     Ctrl-D               -      exit

Assist contains information on many, but not all, of the UMAX commands. In addition, not all options and possibilities for each command are covered. For complete information about a UMAX command, please use the on-line manual pages. 9.2 UNIX Primer Plus

This manual is intended to be the reference manual for UNIX. It has several handy features. The inside of the front cover has a listing of UNIX command and the page number on which a description of the command and its options can be found. In addition, there are some quick reference sheets that can be removed from the book and used at your terminal. The book is well written, humorous, and contains a lot of information about UNIX. There might be subtle differences between generic UNIX and UMAX.

Another manual that is a good reference for UNIX is "A Practical Guide to UNIX System V" by Mark G. Sobell.

9.3 TAB (Technical Assistance Bulletin)

The TAB is published monthly and contains current articles and helpful hints for the Multimax minicomputers and UNIX in general. To be added to the mailing list to receive a FREE subscription, contact Gloria Armstrong (FTS) 776-4433 or (303) 236-4433.

9.4 Local Support

If you have a local technical person that is available, try them. Some regional offices have a hotline that you can call for assistance.

9.5 CCS Hotline

The is a technical Hotline service available in the Denver office. This service is available to the entire Bureau. This is the fastest way to get your questions answered. The Hotline number is (FTS) 776-HOTT (4688) or Commercial (303) 236-HOTT (4688). 9.6 CBT (DOS based training for UNIX)

There is a Computer Based Training course available on a PC in the Denver training room. It runs under DOS and doesn't need to be connected to a UNIX machine. It is easy to use and has lessons for the beginning and advanced UNIX user, as well as courses in C programming and UNIX system administration. It can also give you instruction about a particular command or topic that interests you. Workshop 9

Lucky you! No workshop

Please complete the…

                                    Summary Workshop 
                                           and
                                    Course Evaluation
                                          NOTES

ÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜ APPENDIX A: DENVER OFFICE LOGIN SEQUENCE

     PRESS Space Bar
                                                               

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ WELCOME TO THE B.O.R. NETWORK P/S:B ³ ³ SYSTEMS PRESENTLY AVAILABLE ARE: ³ ³ ³ ³ SYSTEM NAME ³ ³ ³ ³ VAX 8300'S VAX ³ ³ CYBER/CDCNET F.E. CDC ³ ³ ENCORE/UNIX MAX ³ ³ OUT DIAL OD ³ ³ ³ ³ TO SELECT A SYSTEM, ENTER THE SYSTEM ³ ³ NAME AND CARRIAGE RETURN AT NEXT ³ ³ PROMPT. ³ ³ ³ ³ CHANNEL 04/010. ENTER RESOURCE MAX ³ ³ CONNECTED TO 04/052 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

     Wait 2 seconds then PRESS (Ret) TWICE

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ ³ ³ Annex Command Line Interpreter * Copyright 1988 Xylogics, Inc. ³ ³ ³ ³ *WARNING*Unauthorized access to U.S. Government computers ³ ³ is punishable by fine and/or imprisonment. *WARNING* ³ ³ annex: c domax1 ³ ³ login: your username(Ret) ³ ³ Password: your password(Ret) ³ ³ UNIX System V Release ax.2.2o ns32332 ³ ³ domax1 ³ ³ Copyright © 1984 AT&T ³ ³ All Rights Reserved ³ ³ *WARNING*Unauthorized access to/use of this U.S. Government ³ ³ computer is punishable by fine and/or imprisonment. *WARNING*³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

                                          NOTES

ÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜ APPENDIX B: GREAT PLAINS LOGIN SEQUENCE

     PRESS (Ret)

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ WARNING WARNING WARNING WARNING WARNING ³ ³ PUBLIC LAW 99-474 PROHIBITS UNAUTHORIZED USE OF THIS U.S. GOVERNMENT ³ ³ COMPUTER SYSTEM AND/OR SOFTWARE. PUNISHMENT INCLUDES FINES AND UP TO ³ ³ 10 YEARS IN PRISON. REPORT VIOLATIONS TO THE SYSTEM SECURITY OFFICER. ³ ³ WARNING WARNING WARNING WARNING WARNING ³ ³ ³ ³ ³ ³ ENTER RESOURCE A - BIL640, B - BIL751, OA - BIL630, DEN - DENVER CYBERS ³ ³ FOR STATUS OF COMPUTER SYSTEMS CALL (406) 657-6828 OR FTS 585-6828 ³ ³ FOR EMERGENCY AND AFTER HOURS CALL (406) 255-6932 ³ ³ ³ ³ CHANNEL 02/035. ENTER RESOURCE DEN(Ret) ³ ³ CONNECTED TO 02/079 ³ ³ ³ ³ WELCOME TO THE B.O.R. NETWORK P/S:B ³ ³ SYSTEMS PRESENTLY AVAILABLE ARE: ³ ³ ³ ³ SYSTEM NAME ³ ³ ³ ³ VAX 8300'S VAX ³ ³ CYBER/CDCNET F.E. CDC ³ ³ CENTER ASC ³ ³ ENCORE/UNIX MAX ³ ³ TO SELECT A SYSTEM, ENTER THE SYSTEM ³ ³ CARRIAGE RETURN AT NEXT ³ ³ PROMPT. ³ ³ ³ ³ CHANNEL 02/079. ENTER RESOURCE MAX(Ret) ³ ³ CONNECTED TO 06/025 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

     PRESS (RET) TWICE

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ ³ ³ Annex Command Line Interpreter * Copyright 1988 Xylogics, Inc. ³ ³ ³ ³ *WARNING*Unauthorized access to U.S. Government computers ³ ³ is punishable by fine and/or imprisonment. *WARNING* ³ ³ annex: c domax1 ³ ³ login: your username(Ret) ³ ³ Password: your password(Ret) ³ ³ UNIX System V Release ax.2.2o ns32332 ³ ³ domax1 ³ ³ Copyright © 1984 AT&T ³ ³ All Rights Reserved ³ ³ *WARNING*Unauthorized access to/use of this U.S. Government ³ ³ computer is punishable by fine and/or imprisonment. *WARNING*³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

APPENDIX C: LOWER COLORADO LOGIN SEQUENCE

The following operating procedures show how a user gets to Denver using the Local Area Network (LAN) in Boulder City, starting with the PC prompt: M:\USERNAME>

     ENTER PCPLUS(Ret)

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ | ³ ³ COMMUNICATION SERVICES | PROCOMM PLUS ADD SERVICES MENU ³ ³ ON NETWORK | ³ ³ | ³ ³ GENERAL SPECIFIC SERVER| UP/DOWN ARROW ..Highlight Services ³ ³| ³ ³ MICOM * * | ENTER ….Connect Highlighted Services³ ³ VAX_19.2 * * | ³ ³ MI24 * * | PgPd …..Scroll Up One Page ³ ³ ADMICOM * * | ³ ³ | PgPn …..Scroll Down One Page ³ ³ | ³ ³ | Home …..First Service ³ ³ | ³ ³ | End ……Last Service ³ ³ | ³ ³ | Alt-E ….Expand/Contract Services ³ ³ | ³ ³ | Alt-M ….Manual Connect ³ ³ | ³ ³ | Alt-X ….Exit PROCOMM PLUS ³ ³ | ³ ³ | Alt-Z ….Help ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

     SELECT MICOM.  PRESS (Ret) SEVERAL TIMES 

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ THIS IS THE LOWER COLORADO REGIONAL OFFICE INSTANET 6600 ³ ³ RESOURCES AVAILABLE ³ ³ BLD460 ³ ³ BLD732 ³ ³ BLDT50 ³ ³ DEN (1200BPS) ³ ³ DEN2 (2400BPS) ³ ³ OUTDIAL (1200 BPS) ³ ³ TELEBIT (1400 BPS OUTDIAL) ³ ³ VAX (19.2 lines only) ³ ³ CHANNEL 02/008. ENTER RESOURCE ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

     ENTER DEN(Ret)

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ You are accessing the Denver MICOM through the Boulder City ³ ³ MICOM. Please remember to hit the break key three times ³ ³ after logging off. The first DISCONNECTED comes from. The ³ ³ second DISCONNECTED comes from Boulder City. This will assure³ ³ that other users can connect when you are finished. ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

     PRESS (Ret) SEVERAL TIMES 
                                                               

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ SYSTEM NAME ³ ³ ³ ³ VAX 8300'S VAX ³ ³ CYBER/CDCNET F.E. CDC ³ ³ ASC/CORP. CENTER ASC ³ ³ ENCORE/UNIX MAX ³ ³ ³ ³ TO SELECT A SYSTEM, ENTER THE SYSTEM ³ ³ NAME AND CARRIAGE RETURN AT NEXT ³ ³ PROMPT. ³ ³ ³ ³ CHANNEL 02/079. ENTER RESOURCE MAX(Ret) ³ ³ CONNECTED TO 06/025 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

     PRESS (Ret) TWICE

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ ³ ³ Annex Command Line Interpreter * Copyright 1988 Xylogics, Inc. ³ ³ ³ ³ *WARNING*Unauthorized access to U.S. Government computers ³ ³ is punishable by fine and/or imprisonment. *WARNING* ³ ³ annex: c domax1 ³ ³ login: your username(Ret) ³ ³ Password: your password(Ret) ³ ³ UNIX System V Release ax.2.2o ns32332 ³ ³ domax1 ³ ³ Copyright © 1984 AT&T ³ ³ All Rights Reserved ³ ³ *WARNING*Unauthorized access to/use of this U.S. Government ³ ³ computer is punishable by fine and/or imprisonment. *WARNING*³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

APPENDIX D: MID-PACIFIC LOGIN SEQUENCE

NETWORK LOGIN PROCEDURE

     TYPE PCOMN(Ret)

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ ³ ÚÄÄÄÄÄÄÄ´ Sacramento Connect Menu ÃÄÄÄÄÄÄÄÄÄ¿ ³ ³ ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ 1) Connect to the Sacramento VAX 8300 (USR) ³ ³ ³ ³ ³ ³ ³ ³ 2) Connect to the Sacramento VAX 780 (CVOCO) ³ ³ ³ ³ ³ ³ ³ ³ 3) Connect to the Sacramento ENCORE ³ ³ ³ ³ ³ ³ ³ ³ 4) Connect to the Sacramento (TCP/IP) NETWORK ³ ³ ³ ³ ³ ³ ³ ³ 5) Manual Setup/Connections ³ ³ ³ ³ ³ ³ ³ ³ D) Connect to the DENVER Computers ³ ³ ³ ³ ³ ³ ³ ³ E) EXIT to DOS ³ ³ ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

     PRESS D(Ret)

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ ³ ÚÄÄÄÄÄÄÄ´ Denver Connect Menu ÃÄÄÄÄÄÄÄÄÄ¿ ³ ³ ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ 1) Connect to the Denver VAX 8300 (USR) ³ ³ ³ ³ ³ ³ ³ ³ 2) Connect to the Denver CYBER AA & EE ³ ³ ³ ³ ³ ³ ³ ³ 3) Connect to the Denver ENCORE ³ ³ ³ ³ ³ ³ ³ ³ 4) Connect to the Denver IBM (FFS) ³ ³ ³ ³ ³ ³ ³ ³ 5) Connect to Sacramento Computers ³ ³ ³ ³ ³ ³ ³ ³ E) EXIT to DOS ³ ³ ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

     PRESS 3(Ret)

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ hosts ³ ³ Host Name System Status Load Factor Inet Addr ³ ³ ==================================================================== ³ ³ domax0 up 0.46 137.77.1.2 ³ ³ domax1 up 1.23 137.77.1.3 ³ ³ dosun0 up 1.28 137.77.1.5 ³ ³ erc830 up 0.36 137.77.1.4 ³ ³ annex: c domax0 ³ ³ login: your username(Ret) ³ ³ Password: your password(Ret) ³ ³ UNIX System V Release ax.2.2j ns32332 ³ ³ domax0 ³ ³ Copyright © 1984 AT&T ³ ³ All Rights Reserved ³ ³ *WARNING*Unauthorized access to/use of this U.S. Government ³ ³ computer is punishable by fine and/or imprisonment. *WARNING*³ ³ ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

DEDICATED LINE LOGIN

     TYPE PCOM(Ret)
     PRESS (Ret)

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ NAME OF RESOURCE: DEN(Ret) ³ ³ ³ ³ SYSTEM NAME ³ ³ ³ ³ VAX 8300'S VAX ³ ³ CYBER/CDCNET F.E. CDC ³ ³ ASC/CORP. CENTER ASC ³ ³ ENCORE/UNIX MAX ³ ³ ³ ³ TO SELECT A SYSTEM, ENTER THE SYSTEM ³ ³ NAME AND CARRIAGE RETURN AT NEXT ³ ³ PROMPT. ³ ³ ³ ³ CHANNEL 02/079. ENTER RESOURCE MAX(Ret) ³ ³ CONNECTED TO 06/025 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

     PRESS (Ret) TWICE

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ ³ ³ Annex Command Line Interpreter * Copyright 1988 Xylogics, Inc. ³ ³ ³ ³ *WARNING*Unauthorized access to U.S. Government computers ³ ³ is punishable by fine and/or imprisonment. *WARNING* ³ ³ annex: c domax1 ³ ³ login: your username(Ret) ³ ³ Password: your password(Ret) ³ ³ UNIX System V Release ax.2.2o ns32332 ³ ³ domax1 ³ ³ Copyright © 1984 AT&T ³ ³ All Rights Reserved ³ ³ *WARNING*Unauthorized access to/use of this U.S. Government ³ ³ computer is punishable by fine and/or imprisonment. *WARNING*³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

                                          NOTES

ÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜ APPENDIX E: PACIFIC NORTHWEST LOGIN SEQUENCE

     PRESS (Ret) OR Space Bar

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ * NOTICE * ³ ³ USE OF GOVERNMENT COMPUTER RESOURCES AND DATA IS RESTRICTED TO OFFICIAL ³ ³ GOVERNMENT BUSINESS. FAILURE TO COMPLY COULD RESULT IN DISCIPLINARY ³ ³ ACTION OR PROSECUTION UNDER FEDERAL LAW. REPORT UNAUTHORIZED USE OR ³ ³ ACCESS TO THE ADP SECURITY OFFICER AT (208)334-1746 OR (FTS)554-1746. ³ ³ ³ ³ C = CYBER ³ ³ H = HYDROMET ³ ³ P = OUT DIAL ³ ³ V = VAX BOISE ³ ³ Y = YAKIMA VAX ³ ³ ³ ³ CHANNEL 02/014. ENTER RESOURCE: C(Ret) ³ ³ CONNECTED TO CHANNEL 03/094 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

PRESS (Ret) TWO OR THREE TIMES

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ SYSTEM NAME ³ ³ ³ ³ VAX 8300'S VAX ³ ³ CYBER/CDCNET F.E. CDC ³ ³ ASC/CORP. CENTER ASC ³ ³ ENCORE/UNIX MAX ³ ³ ³ ³ TO SELECT A SYSTEM, ENTER THE SYSTEM ³ ³ NAME AND CARRIAGE RETURN AT NEXT ³ ³ PROMPT. ³ ³ ³ ³ CHANNEL 02/079. ENTER RESOURCE MAX(Ret) ³ ³ CONNECTED TO 06/025 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

     PRESS (Ret) TWICE

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ ³ ³ Annex Command Line Interpreter * Copyright 1988 Xylogics, Inc. ³ ³ ³ ³ *WARNING*Unauthorized access to U.S. Government computers ³ ³ is punishable by fine and/or imprisonment. *WARNING* ³ ³ annex: c domax1 ³ ³ login: your username(Ret) ³ ³ Password: your password(Ret) ³ ³ UNIX System V Release ax.2.2o ns32332 ³ ³ domax1 ³ ³ Copyright © 1984 AT&T ³ ³ All Rights Reserved ³ ³ *WARNING*Unauthorized access to/use of this U.S. Government ³ ³ computer is punishable by fine and/or imprisonment. *WARNING*³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

APPENDIX F: UPPER COLORADO LOGIN SEQUENCE

     PRESS (Ret)

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ Server> C MICOM2400(Ret) ³ ³ Server -010- Session 1 connected. ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

     PRESS (Ret)

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ SLC PORT SELECTOR ³ ³ CHANNEL 01/091. ENTER HOST: DEN(Ret) ³ ³ CONNECTED TO 01/014. ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

     PRESS (Ret) TWO OR THREE TIMES
                                                               

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ SYSTEM NAME ³ ³ ³ ³ VAX 8300'S VAX ³ ³ CYBER/CDCNET F.E. CDC ³ ³ ASC/CORP. CENTER ASC ³ ³ ENCORE/UNIX MAX ³ ³ ³ ³ TO SELECT A SYSTEM, ENTER THE SYSTEM ³ ³ NAME AND CARRIAGE RETURN AT NEXT ³ ³ PROMPT. ³ ³ ³ ³ CHANNEL 02/079. ENTER RESOURCE MAX(Ret) ³ ³ CONNECTED TO 06/025 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

     PRESS (Ret) TWICE

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ ³ ³ Annex Command Line Interpreter * Copyright 1988 Xylogics, Inc. ³ ³ ³ ³ *WARNING*Unauthorized access to U.S. Government computers ³ ³ is punishable by fine and/or imprisonment. *WARNING* ³ ³ annex: c domax1 ³ ³ login: your username(Ret) ³ ³ Password: your password(Ret) ³ ³ UNIX System V Release ax.2.2o ns32332 ³ ³ domax1 ³ ³ Copyright © 1984 AT&T ³ ³ All Rights Reserved ³ ³ *WARNING*Unauthorized access to/use of this U.S. Government ³ ³ computer is punishable by fine and/or imprisonment. *WARNING*³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

APPENDIX G: WASHINGTON OFFICE LOGIN SEQUENCE

     PRESS Space Bar ONCE OR TWICE 

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ CONNECTED TO 01/044 ³ ³ WELCOME TO THE B.O.R. NETWORK P/S:C ³ ³ SYSTEMS PRESENTLY AVAILABLE ARE: ³ ³ ³ ³ SYSTEM NAME ³ ³ ³ ³ CYBER SYSTEMS ³ ³ (AA OR EE) ³ ³ VAX CLUSTER DEN ³ ³ ³ ³ OUT-DIAL MODEM OD ³ ³ ³ ³ TO SELECT A SYSTEM,ENTER THE SYSTEM ³ ³ NAME AND CARRIAGE-RETURN AT NEXT ³ ³ PROMPT. ³ ³ ³ ³ CHANNEL 02/026. ENTER RESOURCE DEN(Ret) ³ ³ CONNECTED TO 01/051 ³ ³ ³ ³ SYSTEM NAME ³ ³ ³ ³ VAX 8300'S VAX ³ ³ CYBER/CDCNET F.E. CDC ³ ³ ASC/CORP. CENTER ASC ³ ³ ENCORE/UNIX MAX ³ ³ ³ ³ TO SELECT A SYSTEM, ENTER THE SYSTEM ³ ³ NAME AND CARRIAGE RETURN AT NEXT ³ ³ PROMPT. ³ ³ ³ ³ CHANNEL 02/079. ENTER RESOURCE MAX(Ret) ³ ³ CONNECTED TO 06/025 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

     PRESS (Ret) TWICE

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ ³ ³ Annex Command Line Interpreter * Copyright 1988 Xylogics, Inc. ³ ³ ³ ³ *WARNING*Unauthorized access to U.S. Government computers ³ ³ is punishable by fine and/or imprisonment. *WARNING* ³ ³ annex: c domax1 ³ ³ login: your username(Ret) ³ ³ Password: your password(Ret) ³ ³ UNIX System V Release ax.2.2o ns32332 ³ ³ domax1 ³ ³ Copyright © 1984 AT&T ³ ³ All Rights Reserved ³ ³ *WARNING*Unauthorized access to/use of this U.S. Government ³ ³ computer is punishable by fine and/or imprisonment. *WARNING*³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

APPENDIX H: UNIX COMMANDS QUICK REFERENCE

a > b put the output of command a into

                                        file b

a » b append the output of command a onto

                                        file b

a < b take the input of command a from

                                        file b

a | c pipe the output of command a to the

                                        input of command c

a & run command a in the background

assist call up the assist menu for

                                        information on UMAX commands

at time < script run script at time

at -l list your at jobs waiting to be

                                        executed

at -r xx remove at job xx

awk '/str1/,/str2/' file display all lines between those

                                        containing str1 and str2

awk '{print $n,$m}' file display fields n and m of file

call host connect to a Multimax from an Annex

cat file display file on the screen

cat file1 » file2 append file1 onto file2

cd return to your home directory

cd dir work in directory dir

chmod perms file change permissions on file to perms

cp file1 file2 copy file1 to file2

cp f1 f2 f3 dir copy files f1, f2, and f3 into

                                        directory dir

csh the C shell

cu options host dial up a remote host

cut -fx file display field x of file

cut -da -fx file use a as a field separator

diff file 1 file 2 display differences between file1

                                        and file2

echo string display string on the terminal

file file1 describe file1's type (data, text,

                                        binary, etc)

finger user display information on user

ftp interactive remote file transfer

grep string file search for string in file

grep -c string file display only the number of

                                        occurrences of string

grep -l string files list file names that contain string

kill %x kill background job x

ksh the KornShell

lp -ddest file Print file on the printer dest

ls list the files in the current

                                        working directory

ls dir list the files in directory dir

ls -a include files that begin with a

                                        . (period)

ls -l long listing including permissions,

                                        size and ownership

ls -C list in columns

ls -ld display detailed information on a

                                        directory, not its contents

mailx read mail via interactive mail

                                        program

mailx user send mail to user

man command display the man pages for command

mkdir dir create directory dir

mv file1 file2 move file1 to file2

mv f1 f2 f3 dir move files f1, f2, and f3 into

                                        directory dir

nsh host commands execute commands on a remote host

passwd change your password

pg file display file on screen at a time

ps display process status of your

                                        current session

ps -u user display process for user

pwd print (current) working directory

rcp host1:file host2:file copy files from one host to another

rlogin host login to a remote host

rm file remove file

rm -rdir remove directory dir and contents

rmdir dir remove directory dir

ruptime display status of hosts on the

                                        network

rwho display information on network

                                        users

sed -e "action" file use stream editor on file

sh Bourne shell

shl the Shell Layer Manager

sort file perform an alphabetic sort based on

                                        the first field of file

sort -n file perform a numeric sort based on the

                                        first field of file

sort +x file sort on field x+1

sort -ta file use a as a field separator

spell file check file for correct spelling

stty display current stty settings

stty intr set interrupt character to

stty kill set kill character to

talk talk with user on your terminal

talk file display the last 10 lines of file

telenet host connect to a remote host

telenet annex connect to an Annex for use of an

                                        outbound port

tr a b file in file, change every a to b

vi file edit file with a full screen editor

wc file list the number of lines, words and

                                        characters in file

write user send a message to user's terminal

uucp file hostpath remote copy APPENDIX I: vi COMMANDS QUICK REFERENCE

Special Commands

Esc return to command mode u undo last command . repeat last insert, delete or put command

Saving Text and Quitting

:w write (save) text :w newfile save text to file newfile :x,yw newfile save lines x to y into newfile :q! quit without saving changes :wq save text and quit

Cursor Positioning

N move to line N N+ down N lines N- up N lines

k up one line j down one line

$ end of line Nw N words ahead Nb back N words w word ahead b back one word e end of word h backspace l forward one space arrow keys space left or right, go up or down one line

Searches

/pattern search forward for pattern ?pattern search backward for pattern ? or / repeat the last search

Deleting Text

Ndd delete N lines dd delete current line D delete remainder of line Ndw delete N words dw delete current word Nx delete N characters x delete one character

Copying Text

NY yank N lines Y yank one line Nyw yank N words yw yank one word

P put yanked lines above current cursor position, or

                   put yanked words before current cursor position

p put yanked lines below current cursor position, or

                   put yanked words after current cursor position

Entering Text Mode

I enter text mode, additional text appears at the

                   beginning of the current line

i enter text mode, additional text appears before

                   the current cursor position

A enter text mode, additional text appears at the

                   end of the current line

a enter text mode, additional text appears after the

                   current cursor position.

O enter text mode, open a line above the current

                   line

o enter text mode, open a line below the current

                   line

Replacing and Substituting Text

r replace one character at current cursor position,

                   then return to command mode

R replace characters until Esc

s substitute characters for the current character

                   until Esc

Ns substitute characters for the current N characters

                   until Esc

Reading in Text

:r filename append the contents of filename below the current

                   cursor position

:r !shell-cmd append the output of shell-cmd below the current

                   cursor position

Global Operations

:x,ys/old/new/g

                   on lines x through y, change old to new

:x,yg/pattern/d

                   delete any line from x toy that has the string
                   pattern 
                                          NOTES

ÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜ APPENDIX J: vi COMMANDS REFERENCE

NAME

   vi - screen-oriented (visual) display editor based on ex

SYNOPSIS

   vi [ -t tag ] [ -r file ] [ -L ] [ -wn ] [ -R ] [ -x ] [ -C
   ] [ -ccommand ] file ...
   view [ -t tag ] [ -r file ] [ -L ] [ -wn ] [ -R ] [ -x ] [
   -C ] [ -ccommand ] file ...
   vedit [ -t tag ] [ -r file ] [ -L ] [ -wn ] [ -R ] [ -x ] [
   -C ] [ -ccommand ] file ...

DESCRIPTION

   vi (visual) is a display-oriented text editor based on an
   underlying line editor ex(1).  It is possible to use the
   command mode of ex from within vi and vice-versa. The visual
   commands are described on this manual page; how to set
   options (like automatically numbering lines and
   automatically starting a new output line after a carriage
   return) and all ex(1) line editor commands are described on
   the ex(1) manual page.
   When using vi, changes made to the file are reflected in
   what is displayed on the terminal screen.  The position of
   the cursor on the screen indicates the position within the
   file.

INVOCATION

   The following invocation options are interpreted by vi:
  1. t tag Edit the file containing the tag and position the

cursor at its definition. The file (tags)

           containing the tag is found in the current directory
           or in /usr/lib/tags.  Below is an example of a tags
           file:
                  line /tmp/vi.file   /line/
                  this /tmp/vi.file   /this/
           Using "vi -t line", the edited file will be
           "/tmp/vi.file". The file will be searched for the
           first occurrence of "line", and the cursor will be
           placed at "line".
  1. r file Edit file after an editor or system crash.

(Recovers the version of file that was in the buffer

           when the crash occurred.)
  1. L List the name of all files saved as the result of an

editor or system crash.

  1. wn Set the default window size to n. This is useful

when using the editor over a slow speed line.

  1. R Readonly mode; the readonly flag is set, preventing

accidental overwriting of the file.

  1. x Encryption option; when used, vi simulates the X

command of ex(1) and prompts the user for a key.

           This key is used to encrypt and decrypt text using
           the algorithm of crypt(1).  The X command makes an
           educated guess to determine whether or not text read
           in is encrypted.  The temporary buffer file is
           encrypted also, using a transformed version of the
           key typed in for the -x option.  See crypt(1).
           Also, see the WARNING section at the end of this
           manual page.
  1. C Encryption option, same as the -x option, except

that vi simulates the C command of ex(1). The C

           command is like the X command of ex(1), except that
           all text read in is assumed to have been encrypted.
  1. c command Begin editing by executing the specified

editor command (usually a search or positioning

           command).
   The file argument indicates one or more files to be edited.
   The view invocation is the same as vi except that the
   readonly flag is set.
   The vedit invocation is intended for beginners.  It is the
   same as vi except that the report flag is set to 1, the
   showmode and novice flags are set, and magic is turned off.
   These defaults make it easier to learn vi.

VI MODES

   Command  Normal and initial mode.  Other modes return to
   command mode upon completion.  ESC (escape) is used
   to cancel a partial command.
   Input    Entered by setting the following options: a i A I o
            O c s R.  Arbitrary text may then be entered.
            Input mode is normally terminated with ESC
            character, or abnormally with interrupt.
   Last line
            Reading input for : / ? or !; terminate with  CR to
            execute, interrupt to cancel.

COMMAND SUMMARY

   In the descriptions, CR stands for carriage return and ESC
   stands for the escape key.
 Sample Commands
   <- | | ->           arrow keys move the cursor
   h j k l             same as arrow keys
   itextESC            insert text
   cwnewESC            change word to new
   easESC              pluralize word (end of word; append s;
                       escape from input state)
   x                   delete a character
   dw                  delete a word
   dd                  delete a line
   3dd                 delete 3 lines
   u                   undo previous change
   ZZ                  exit vi, saving changes
   :q!CR               quit, discarding changes
   /textCR             search for text
   U D                 scroll up or down
   :ex cmdCR           any ex or ed command
 Counts Before vi Commands
   Numbers may be typed as a prefix to some commands.  They are
   interpreted in one of these ways:
   line/column number  z G |
   scroll amount       D U
   repeat effect       most of the rest
 Interrupting, Canceling
   ESC                 end insert or incomplete cmd
   DEL                 (delete or rubout) interrupts
   L                   reprint screen if DEL scrambles it
   R                   reprint screen if L is -> key
 File Manipulation
   ZZ                  if file is modified, write and exit;
                       otherwise, exit
   :wCR                write back changes
   :w!CR               forced write, if permission originally
                       not valid
   :qCR                quit
   :q!CR               quit, discard changes
   :e nameCR           edit file name
   :e!CR               reedit, discard changes
   :e + nameCR         edit, starting at end
   :e +n filename CR   edit starting at line n
   :e #CR              edit alternate file
   :e! #CR             edit alternate file, discard changes
   :w nameCR           write file name
   :w! nameCR          overwrite file name
   :shCR               run shell, then return
   :!cmdCR             run cmd, then return
   :nCR                edit next file in arglist
   :n argsCR           specify new arglist
   G                   show current file and line
   :ta tagCR           to tag file entry tag
   In general, any ex or ed command (such as substitute or
   global) may be typed, preceded by a colon and followed by a
   CR.
 Positioning Within File
   F                   forward screen
   B                   backward screen
   D                   scroll down half screen
   U                   scroll up half screen
   Ng                  go to the beginning of the specified
                       line (end default), where n is a line
                       number
   /pat                next line matching pat
   ?pat                prev line matching pat
   n                   repeat last / or ? command
   N                   reverse last / or ? command
   /pat/+n             nth line after pat
   ?pat?-n             nth line before pat
   ]]                  next section/function
   [[                  previous section/function
   (                   beginning of sentence
   )                   end of sentence
   {                   beginning of paragraph
   }                   end of paragraph
   %                   find matching ( ) { or }
 Adjusting The Screen
   L                   clear and redraw
   zCR                 clear and redraw window if ^L is -> key
   ZCR                 redraw screen with current line at top
                       of window
   z-CR                redraw screen with current line at
                       bottom of window
   z.CR                redraw screen with current line at
                       center of window
   /pat/z-CR           move pat line to bottom of window
   zn.CR               use n line window
   E                   scroll window down 1 line
   Y                   scroll window up 1 line
 Marking and Returning
   ``                  move cursor to previous context
   ''                  move cursor to first non-white space in
                       line
   mx                  mark current position with the ACSII
                       lower-case letter x
   `x                  move cursor to mark x
   'x                  move cursor to first non-white space in
                       line marked by x
 Line Positioning
   H                   top line on screen
   L                   last line on screen
   M                   middle line on screen
   +                   next line, at first non-white
   -                   previous line, at first non-white
   CR                  return, same as +
   | or j              next line, same column
   | or k              previous line, same column
 Character Positioning
   first non-white-space character
   0                   beginning of line
   $                   end of line
   l or ->             forward
   h or <-             backwards
   H                   same as <- (backspace)
   space               same as -> (space bar)
   fx                  find next x
   Fx                  find previous x
   tx                  move to character prior to next x
   Tx                  move to character following previous x
   ;                   repeat last f F
   ,                   repeat last t T
   n|                  to specified column
   %                   find matching () { or }
 Words, Sentences, Paragraphs
   w                   forward a word
   b                   back a word
   e                   end of word
   )                   to next sentence
   }                   to next paragraph
   (                   back a sentence
   {                   back a paragraph
   W                   forward a blank-delimited word
   B                   back a blank-delimited word
   E                   to end of a blank-delimited word
 Corrections During Insert
   H                   erase last character (backspace)
   W                   erase last word
   erase               erase, same as H
   kill                kill, erase this line of input
   \                   quotes H, erase and kill characters
   ESC                 ends insertion, back to command mode
   DEL                 interrupt, terminates insert mode
   D                   backtab one character; reset left margin
                       of autoindent
   |D                  caret () followed by control-d (D);
                       backtab to beginning of line; do not
                       reset left margin of autoindent
   0D                  backtab to beginning of line; reset left
                       margin of autoindent
   V                   quote non-printable character
 Insert and Replace
   a                   append after cursor
   A                   append at end of line
   i                   insert before cursor
   I                   insert before first non-blank
   o                   open line below
   O                   open above
   rx                  replace single char with x
   RtextESC            replace characters
 Operators
   Operators are followed by a cursor motion, and affect all
   text that would have been moved over.  For example, since w
   moves over a word, dw deletes the word.  Double the
   operator, e.g., dd to affect whole lines.
   d                   delete
   c                   change
   y                   yank lines to buffer
   <                   left shift
   >                   right shift
   !                   filter through command
 Miscellaneous Operations
   C                   change rest of line (c$)
   D                   delete rest of line (d$)
   s                   substitute chars (cl)
   S                   substitute lines (cc)
   J                   join lines
   x                   delete characters (dl)
   X                   ... before cursor (dh)
   Y                   yank lines (yy)
 Yank and Put
   Put inserts the text most recently deleted or yanked;
   however, if a buffer is named (using the ASCII lower-case
   letters a - z), the text in that buffer is put instead.
   3yy                 yank 3 lines
   3yl                 yank 3 characters
   p                   put back text after cursor
   P                   put back text before cursor
   "xp                 put from buffer x
   "xY ("xyy)          yank to buffer x
   "xD ("xdd)          delete into buffer x
 Undo, Redo, Retrieve
   u                   undo last change
   U                   restore current line
   .                   repeat last change
   "dp                 retrieve d'th last delete

AUTHOR

   vi and ex were developed by The University of California,
   Berkeley California, Computer Science Division, Department
   of Electrical Engineering and Computer Science.

FILES

   /tmp                     default directory where temporary
                            work files are placed; it can be
                            changed using the directory option
                            (see the ex(1) set command)
   /usr/lib/terminfo/?/*    compiled terminal description
                            database
   /usr/lib/.COREterm/?/*   subset of compiled terminal
                            description database, supplied on
                            hard disk

NOTES

   Two options, although they continue to be supported, have
   been replaced in the documentation by options that follow
   the Command Syntax Standard (see intro(1)).  A -r option
   that is not followed with an option-argument has been
   replaced by -L and +command has been replaced by -c command.

SEE ALSO

   ed(1), ex(1).
   "Screen Editor Tutorial (vi)" in the UMAX V User's Guide.

WARNING

   The encryption options are provided with the Security
   Administration Utilities package, which is available only in
   the United States.
   Tampering with entries in /usr/lib/.COREterm/?/* or
   /usr/lib/terminfo/?/* (for example, changing or removing an
   entry) can affect programs such as vi(1) that expect the
   entry to be present and correct.  In particular, removing
   the "dumb" terminal may cause unexpected problems.

BUGS

   Software tabs using T work only immediately after the
   autoindent.
   Left and right shifts on intelligent terminals do not make
   use of insert and delete character operations in the
   terminal.

APPENDIX K: ftp COMMANDS REFERENCE

NAME

   ftp - Internet file transfer program 

SYNOPSIS

   ftp [ -v ] [ -d ] [ -i ] [ -n ] [ -g ] [ host ]
                                                  

DESCRIPTION

   ftp is the user interface to the DARPA File Transfer
   Protocol. The program transfers files to and from a remote
   network site.                                             
                                                             
   The client host with which ftp is to communicate can be   
   specified on the command line. In this case, ftp immediately
   attempts to establish a connection to an FTP server on that 
   host; otherwise, ftp enters its command interpreter and     
   waits for instruction, displaying the prompt ftp>.          
                                                               
   ftp recognizes the following commands:                      
                                                               
   ! [ command [ args ] ]                                      
             Invoke an interactive shell on the local machine. 
             If there are arguments, the first is taken to be a
             command to execute directly, with the rest of the 
             arguments as its arguments.                       
                                                               
   $ macro-name [ args ]                                       
             Execute the macro-name that was defined with      
             the macdef command.  Arguments are passed to the  
             macro unglobbed.                                  
                                                               
   account [ passwd ]                                          
             Supply a supplemental password required by a      
             remote system for access to resources once a login
             has been successfully completed.  If no argument  
             is included, the user will be prompted for an     
             account password in a non-echoing input mode.     
                                                               
   append local-file [ remote-file ]                           
             Append a local file to a file on the remote       
             machine. If remote-file is left unspecified, the  
             local file name is used to name the remote file   
             after being altered by any ntrans or nmap setting.
             File transfer uses the current settings for type, 
             format, mode, and structure.                      
                                                               
   ascii     Set the file transfer type to network ASCII. This 
             is the default type.
   bell      Sound a bell after each file transfer command is  
             completed.                                        
                                                               
   binary    Set the file transfer type to support binary image
             transfer.                                         
                                                               
   bye       Terminate the FTP session with the remote server  
             and exit ftp.                                     
                                                               
   case      Toggle remote computer file name case mapping     
             during mget commands.  When case is on (default is
             off), remote computer file names with all letters 
             in upper case are written in the local directory  
             with the letters mapped to lower case.            
                                                               
   cd remote-directory                                         
             Change the working directory on the remote machine
             to remote-directory.                              
                                                               
   cdup      Change the remote machine working directory to the
             parent of the current remote machine working      
             directory.                                        
                                                               
   close     Terminate the FTP session with the remote server, 
             and return to the command interpreter.  Any       
             defined macros are erased.                        
                                                               
   cr        Toggle carriage return stripping during ASCII type
             file retrieval.  Records are denoted by a carriage
             return/linefeed sequence during ASCII type file   
             transfer.  When cr is on (the default), carriage  
             returns are stripped from this sequence to conform
             with the UNIX single linefeed record delimiter.   
             Records on non-UNIX remote systems may contain    
             single linefeeds; when an ASCII type transfer is  
             made, these linefeeds may be distinguished from a 
             record delimiter only when cr is off.             
                                                               
   delete remote-file                                          
             Delete the file remote-file on the remote machine.
                                                               
   debug [ debug-value ]                                       
             Toggle debugging mode. If an optional debug-value 
             is specified, it is used to set the debugging     
             level. When debugging is on, ftp prints each      
             command sent to the remote machine, preceded by   
             the string --> .                                  
   dir [ remote-directory ] [ local-file ]                     
             Print the contents of directory, remote-directory,
             and, optionally, place the output in local-file.  
             If no directory is specified, the current working 
             directory on the remote machine is used. If no    
             local file is specified, or local-file is -,      
             output comes to the terminal.                     
                                                               
   disconnect                                                  
             A synonym for close.                              
                                                               
   form format                                                 
             Set the file transfer form to format.  The default
             format is file.                                   
                                                               
   get remote-file [ local-file ]                           
             Retrieve the remote-file and store it on the local
             machine. If the local file name is not specified, 
             it is given the same name it has on the remote    
             machine, subject to alteration by the current     
             case, ntrans, and nmap settings. The current      
             settings for type, form, mode, and structure are  
             used while transferring the file.                 
                                                               
   glob      Toggle filename expansion for mdelete, mget and   
             mput.  If globbing is turned off with glob, the   
             file name arguments are taken literally and not   
             expanded.  Globbing for mput is done as in csh(1).
             For mdelete and mget, each remote file name is    
             expanded separately on the remote machine and the 
             lists are not merged.  Expansion of a directory   
             name is likely to be different from expansion of  
             the name of an ordinary file:  the exact result   
             depends on the foreign operating system and FTP   
             server, and can be previewed by doing             
             "mls remote-files -".  Note:  mget and mput are   
             not meant to transfer entire directory subtrees of
             files.  That can be done by transferring a tar(1) 
             archive of the subtree (in binary mode).          
                                                               
   hash      Toggle number-sign (#) printing for each data     
             block transferred. The size of a data block is    
             1024 bytes.                                       
                                                               
   help [ command ]                                            
             Print a description of command.  With no argument,
             ftp prints a list of the known commands.          
                                                               
   lcd [ directory ]                                           
             Change the working directory on the local machine.
             If no directory is specified, changes to the      
             user's home directory.                            
   ls [ remote-directory ] [ local-file ]                      
             Print an abbreviated listing of the contents of a 
             directory on the remote machine. If remote-       
             directory is left unspecified, the current working
             directory is used. If no local file is specified, 
             the output is sent to the terminal.               
                                                               
   macdef macro-name                                           
             Define a macro.  Subsequent lines are stored as   
             the macro macro-name; a null line (consecutive    
             newline characters in a file or carriage returns  
             from the terminal) terminates macro input mode.   
             There is a limit of 16 macros and 4096 total      
             characters in all defined macros.  Macros remain  
             defined until a close command is executed.  The   
             macro processor interprets "$" and "\" as special 
             characters.  A "$" followed by a number (or       
             numbers) is replaced by the corresponding argument
             on the macro invocation command line.  A "$"      
             followed by an "i" signals that macro processor   
             that the executing macro is to be looped. On the  
             first pass "$i" is replaced by the first argument 
             on the macro invocation command line, on the      
             second pass it is replaced by the second argument,
             and so on.  A "\" followed by any character is    
             replaced by that character.  Use the "\" to       
             prevent special treatment of the "$".             
                                                               
   mdelete [ remote-files ]                                    
             Delete the specified files on the remote machine. 
                                                               
   mdir remote-files local-file                             
             Like dir, except multiple remote files may be     
             specified.  If interactive prompting is on, ftp   
             will prompt the user to verify that the last      
             argument is indeed the target local file for      
             receiving mdir output.                            
                                                               
   mget remote-files                                           
             Expand the remote-files on the remote machine and 
             do a get for each file name thus produced.  See   
             glob for details on the filename expansion.       
             Resulting file names will then be processed       
             according to case, ntrans, and nmap settings.     
             Files are transferred into the local working      
             directory, which can be changed with              
             "lcd directory"; new local directories can be     
             created with "! mkdir directory".                 
                                                               
   mkdir directory-name                                        
             Make a directory on the remote machine.
   mls remote-files local-file                                 
             Like ls, except multiple remote files may be      
             specified.  If interactive prompting is on, ftp   
             will prompt the user to verify that the last      
             argument is indeed the target local file for      
             receiving mls output.                             
                                                               
   mode [ mode-name ]                                          
             Set the file transfer mode to mode-name.  The     
             default mode is stream.                           
                                                               
   mput local-files                                            
             Expand wild cards in the list of local files given
             as arguments and do a put for each file in the    
             resulting list.  See glob for details of filename 
             expansion.  Resulting file names will then be     
             processed according to ntrans and nmap settings.  
                                                               
   nmap [ inpattern outpattern ]                               
             Set or unset the filename mapping mechanism.  If  
             no arguments are specified, the filename mapping  
             mechanism is unset.  If arguments are specified,  
             remote filenames are mapped during mput commands  
             and put commands issued without a specified remote
             target filename.  If arguments are specified,    
             local filenames are mapped during mget commands  
             and get commands issued without a specified local
             target filename.  This command is useful when    
             connecting to a non-UNIX remote computer with    
             different file naming conventions or practices.  
             The mapping follows the pattern set by inpattern 
             and outpattern.  inpattern is a template for     
             incoming filenames (which may have already been  
             processed according to the ntrans and case       
             settings).  Variable templating is accomplished by
             including the sequences "$1", "$2", ..., "$9" in  
             inpattern.  Use "\" to prevent this special       
             treatment of the "$" character.  All other        
             characters are treated literally, and are used to 
             determine the nmap inpattern variable values.  For
             example, given inpattern $1.$2 and the remote file
             name mydata.data, $1 would have the value mydata, 
             and $2 would have the value data.  The outpattern 
             determines the resulting mapped filename.  The    
             sequences "$1", "$2", ..., "$9" are replaced by   
             any value resulting from the inpattern template.  
             The sequence "$0" is replaced by the original     
             filename.  Additionally, the sequence             
             "[seq1,seq2]" is replaced by seq1 if seq1 is not a
             null string; otherwise it is replaced by seq2.    
             For example, the command "nmap $1.$2.$3
             [$1,$2].[$2,file]" would yield the output filename
             myfile.data for input filenames myfile.data and   
             myfile.data.old, myfile.file for the input        
             filename myfile, and myfile.myfile for the input  
             filename .myfile.  Spaces may be included in      
             outpattern, as in the example:                    
                                                               
                  nmap $1 | sed "s/  *$//" > $1                
                                                               
             Use the "\" character to prevent special treatment
             of the "$", "[", "]", and "," characters.         
                                                               
   ntrans [ inchars [ outchars ] ]                             
             Set or unset the filename character translation   
             mechanism.  If no arguments are specified, the    
             filename character translation mechanism is unset.
             If arguments are specified, characters in remote  
             filenames are translated during mput commands and 
             put commands issued without a specified remote    
             target filename.  If arguments are specified,     
             characters in local filenames are translated      
             during mget commands and get commands issued      
             without a specified local target filename.  This  
             command is useful when connecting to a non-UNIX   
             remote computer with different file naming        
             conventions or practices.  Characters in a        
             filename matching a character in inchars are      
             replaced with the corresponding character in      
             outchars.  If the character's position in inchars 
             is longer than the length of outchars, the        
             character is deleted from the file name.          
                                                               
   open host [ port ]                                          
             Establish a connection to the specified host's FTP
             server. An optional port number can be supplied,  
             in which case, ftp attempts to contact an FTP     
             server at that port. If the auto-login option is  
             on (default), ftp also attempts to automatically  
             log the user in to the FTP server (see below).    
                                                               
   prompt    Toggle interactive prompting. Interactive         
             prompting occurs during multiple file transfers to
             allow the user to selectively retrieve or store   
             files. If prompting is turned off (default), any  
             mget or mput transfers all files and mdelete will 
             delete all files.
   proxy ftp-command                                           
             Execute an ftp command on a secondary control     
             connection.  This command allows simultaneous     
             connection to two remote FTP servers for          
             transferring files between the two servers.  The 
             first proxy command should be an open, to        
             establish the secondary control connection.  Enter
             the command "proxy ?" to see other ftp commands   
             executable on the secondary connection.  The      
             following commands behave differently when        
             prefaced by proxy:  open will not define new      
             macros during the auto-login process, close will  
             not erase existing macro definitions, get and mget
             transfer files from the host on the primary       
             control connection to the host on the secondary   
             control connection, and put, mput, and append     
             transfer files from the host on the secondary     
             control connection to the host on the primary     
             control connection.  Third party file transfers   
             depend upon support of the FTP protocol PASV      
             command by the server on the secondary control    
             connection.                                       
                                                               
   put local-file [ remote-file ]                              
             Store a local file on the remote machine. If      
             remote-file is left unspecified, the local file   
             name is used in naming the remote file, after     
             processing according to any ntrans or nmap        
             settings.  File transfer uses the current settings
             for type, format, mode, and structure.            
                                                               
   pwd       Print the name of the current working directory on
             the remote machine.                               
                                                               
   quit      A synonym for bye.                                
                                                               
   quote arg1 arg2 ...                                         
             The arguments specified are sent, verbatim, to the
             remote FTP server.                                
                                                               
   recv remote-file [ local-file ]                             
             A synonym for get.                                
                                                               
   remotehelp [ command-name ]                                 
             Request help from the remote FTP server. If a     
             command-name is specified, it is supplied to the  
             server as well.                                   
                                                               
   rename [ from ] [ to ]                                      
             Rename, on the remote machine, the file from to   
             the file to.
   reset     Clear reply queue.  This command re-synchronizes  
             command/reply sequencing with the remote FTP      
             server.  Resynchronization may be necessary       
             following a violation of the FTP protocol by the  
             remote server.                                    
                                                               
   rmdir directory-name                                        
             Delete a directory on the remote machine.         
                                                               
   runique   Toggle storing of files on the local system with  
             unique filenames.  If a file already exists with a
             name equal to the target local filename for a get 
             or mget command, a ".1" is appended to the name.  
             If the resulting name matches another existing    
             file, a ".2" is appended to the original name.  If
             this process continues up to ".99", an error      
             message is printed, and the transfer does not take
             place.  The generated unique filename will be     
             reported.  Note that runique will not affect local
             files generated from a shell command (see below). 
             The default value is off.                         
                                                               
   send local-file [ remote-file ]                             
             A synonym for put.                                
                                                               
   sendport  Toggle the use of PORT commands. By default, ftp  
             attempts to use a PORT command when establishing a
             connection for each data transfer. The use of PORT
             commands can prevent delays when performing       
             multiple file transfers.  If the PORT command     
             fails, ftp uses the default data port. When the   
             use of PORT commands is disabled, no attempt is   
             made to use them for each data transfer. This is  
             useful for certain FTP implementations that do    
             ignore PORT commands but wrongly indicate they    
             have been accepted.                               
                                                               
   status    Show the current status of ftp.                   
   struct [ struct-name ]                                      
             Set the file transfer structure to struct-name.   
             The default structure is stream.                  
                                                               
   sunique   Toggle storing of files on remote machine under   
             unique file names.  Remote FTP server must support
              the FTP protocol STOU command for successful    
             completion.  The remote server will report a     
             unique name.  Default value is off.              
                                                              
   tenex     Set the file transfer type to that needed to talk
             to TENEX machines.
   trace     Toggle packet tracing.                           
                                                              
   type [ type-name ]                                         
             Set the file transfer type to type-name.  If no  
             type-name is specified, the current type is      
             printed. The default type is network ascii.      
                                                              
   user user-name [ password ] [ account ]                    
             The user identifies him/herself to the remote FTP 
             server. If the password is not specified and the  
             server requires it, ftp prompts the user for it   
             (after disabling local echo).  If an account field
             is not specified, and the FTP server requires it, 
             the user is prompted for it. If an account field  
             is specified, an account command will be relayed  
             to the remote server after the login sequence is  
             completed if the remote server did not require it 
             for logging in.  Unless ftp is invoked with       
             "auto-login" disabled, this process is done       
             automatically on initial connection to the FTP    
             server.                                           
                                                               
   verbose   Toggle verbose mode. In verbose mode, all         
             responses from the FTP server are displayed to the
             user. In addition, if verbose is on, when a file  
             transfer completes, statistics regarding the      
             efficiency of the transfer are reported. By       
             default, verbose is on.                           
                                                               
   ? [ command ]                                               
             A synonym for help.                               
                                                               
   Command arguments that have embedded spaces can be quoted   
   with double quote (") marks.                                
                                                               

ABORTING A FILE TRANSFER

   To abort a file transfer, use the terminal interrupt key    
   (usually <ctrl>C).  Sending transfers will be immediately   
   halted.  Receiving transfers will be halted by sending a FTP
   protocol ABOR command to the remote server, and discarding  
   any further data received.  The speed at which this is      
   accomplished depends upon the remote server's support for   
   ABOR processing.  If the remote server does not support the 
   ABOR command, an ftp> prompt will not appear until the      
   remote server has completed sending the requested file.     
                                                               
   The terminal interrupt key sequence will be ignored when ftp
   has completed any local processing and is awaiting a reply  
   from the remote server.  A long delay in this mode may      
   result from the ABOR processing described above, or from    
   unexpected behavior by the remote server, including         
   violations of the FTP protocol.  If the delay results from  
   unexpected remote server behavior, the local ftp program    
   must be killed by hand.                                     
                                                               

FILE NAMING CONVENTIONS

   Files specified as arguments to ftp commands are processed  
   according to the following rules.                           
                                                               
   1.   If the file name is -, the standard input (for reading)
        or the standard output (for writing) is used.          
                                                               
   2.   If the first character of the file name is a bar |, the
        remainder of the argument is interpreted as a shell    
        command.  ftp then forks a shell, using popen(3S) with 
        the argument supplied, and reads (writes) from the     
        stdout (stdin).  If the shell command includes spaces, 
        the argument must be quoted; for example, "| ls -lt". A
        particularly useful example of this mechanism is       
        "dir | more".                                          
                                                               
   3.   Failing the above checks, if globbing is enabled, local
        file names are expanded according to the rules used in 
        the csh(1); see the glob command.  If the ftp command  
        expects a single local file (e.g., put), only the first
        filename generated by the globbing operation is used.  
                                                               
   4.   For mget commands and get commands with unspecified    
        local file names, the local filename is the remote     
        filename, which may be altered by a case, ntrans, or   
        nmap setting.  The resulting filename may then be      
        altered if runique is on.                              
                                                               
   5.   For mput commands and put commands with unspecified    
        remote file names, the remote filename is the local    
        filename, which may be altered by a ntrans or nmap     
        setting.  The resulting filename may then be altered by
        the remote server if sunique is on.                    
                                                               

FILE TRANSFER PARAMETERS

   The FTP specification identifies many parameters that can   
   affect a file transfer. The type can be one of ascii, image 
   (binary), ebcdic, and local byte size (for PDP-10's and     
   PDP-20's mostly).  ftp supports the ascii and image types of
   file transfer, plus local byte size 8 for tenex mode        
   transfers.                                                  
                                                               
   ftp supports only the default values for the remaining file 
   transfer parameters:  mode, form, and struct.               
                                                               

OPTIONS

   Options can be specified at the command line, or to the     
   command interpreter.                                        
   The -v (verbose on) option forces ftp to show all responses 
   from the remote server, as well as report on data transfer  
   statistics.                                                 
                                                               
   The -n option restrains ftp from attempting "auto-login"    
   upon initial connection.  If auto-login is enabled, ftp     
   checks the netrc file in the user's home directory for an   
   entry describing an account on the remote machine. If no    
   entry exists, ftp will prompt for the remote machine login  
   name (default is the user identity on the local machine),   
   and, if necessary, prompt for a password and an account with
   which to login.                                             
                                                               
   The -i option turns off interactive prompting during        
   multiple file transfers.                                    
                                                               
   The -d option enables debugging.                            
                                                               
   The -g option disables file name globbing.                  
                                                               

THE .netrc FILE

   The .netrc file contains login and initialization           
   information used by the "auto-login" process.  It resides in
   the user's home directory.  The following tokens are        
   recognized; they may be separated by spaces, tabs, or new-  
   lines:                                                      
                                                               
   machine name                                                
        Identify a remote machine name.  The auto-login process
        searches the .netrc file for a machine token that      
        matches the remote machine specified on the ftp command
        line or as an open command argument.  Once a match is  
        made, the subsequent .netrc tokens are processed,      
        stopping when the end of file is reached or another    
        machine token is encountered.                          
                                                               
   login name                                                  
        Identify a user on the remote machine.  If this token  
        is present, the "auto-login" process will initiate a   
        login using the specified name.                        
                                                               
   password string                                             
        Supply a password.  If this token is present, the      
        "auto-login" process will supply the specified string  
        if the remote server requires a password as part of the
        login process.  Note that if this token is present in  
        the .netrc file, ftp will abort the "auto-login"       
        process if the .netrc is readable by anyone besides the
        user.                                                  
  account string                                              
        Supply an additional account password.  If this token  
        is present, the "auto-login" process will supply the   
        specified string if the remote server requires an      
        additional account password, or the "auto-login"       
        process will initiate an ACCT command if it does not.  
                                                               
   macdef name                                                
        Define a macro.  This token functions like the ftp    
        macdef command functions.  A macro is defined with the
        specified name; its contents begin with the next .netrc
        line and continue until a null line (consecutive new- 
        line characters) is encountered.  If a macro named init
        is defined, it is automatically executed as the last   
        step in the "auto-login" process.                      
                                                               

SEE ALSO

   csh(1).                                                    
   ftpd(1M) in the UMAX V Administrator's Reference Manual.   
                                                              

BUGS

   Correct execution of many commands depends upon proper     
   behavior by the remote server.                             
                                                              
   An error in the treatment of carriage returns in the 4.2BSD
   UNIX ASCII-mode transfer code has been corrected.  This    
   correction may result in incorrect transfers of binary files
   to and from 4.2BSD servers using the ascii type.  Avoid this
   problem by using the binary image type.

APPENDIX L: telnet COMMANDS REFERENCE

NAME

   telnet - user interface to the TELNET protocol

SYNOPSIS

   telnet [ host [ port ] ]

DESCRIPTION

   The telnet command communicates with another host using the
   TELNET protocol. If telnet is invoked without arguments, it
   enters command mode, indicated by its prompt (for example,
   telnet>).  In this mode, it accepts and executes the
   commands listed below. If it is invoked with arguments, it
   performs an open command (see below) with those arguments.
   Once a connection has been opened, telnet enters input mode.
   The input mode entered will be either character at a time or
   line by line depending on what the remote system supports.
   In character at a time mode, most text typed is immediately
   sent to the remote host for processing.
   In line by line mode, all text is echoed locally, and
   (normally) only completed lines are sent to the remote host.
   The local echo character (initially ^E) may be used to turn
   off and on the local echo (this would mostly be used to
   enter passwords without the password being echoed).
   In either mode, if the localchars toggle is TRUE (the
   default in line mode; see below), the user's quit, intr, and
   flush characters are trapped locally, and sent as TELNET
   protocol sequences to the remote side.  There are options
   (see toggle autoflush and toggle autosynch below) which
   cause this action to flush subsequent output to the terminal
   (until the remote host acknowledges the TELNET sequence) and
   flush previous terminal input (in the case of quit and
   intr).
   While connected to a remote host, telnet command mode may be
   entered by typing the telnet escape character (initially
   ^]).  When in command mode, the normal terminal editing
   conventions are available.

COMMANDS

   The following commands are available.  Only enough of each
   command to uniquely identify it need be typed (this is also
   true for arguments to the mode, set, toggle, and display
   commands).
   open host [ port ]
            Open a connection to the named host. If no port
            number is specified, telnet attempts to contact a
            TELNET server at the default port.  The host
            specification can be either a host name (see
            hosts(4)) or an Internet address specified in "dot
            notation" (see inet(3N)).
   close    Close a TELNET session and return to command mode.
   quit     Close any open TELNET session and exit telnet.  An
            end-of-file (in command mode) will also close a
            session and exit.
   <ctrl>Z  Suspend telnet.  This command only works when the
            user is using the csh(1) or the BSD application
            environment version of ksh(1).
   status   Show the current status of telnet.  This includes
            the peer one is connected to, as well as the
            current mode.
   display [ argument ... ]
            Displays all, or some, of the set and toggle values
            (see below).
   ? [ command ]
            Get help.  With no arguments, telnet prints a help
            summary.  If a command is specified, telnet will
            print the help information for just that command.
   send arguments
            Sends one or more special character sequences to
            the remote host.  The following are the arguments
            which may be specified (more than one argument may
            be specified at a time):
            escape
                 Sends the current telnet escape character
                 (initially ^]).
            synch
                 Sends the TELNET SYNCH sequence.  This
                 sequence causes the remote system to discard
                 all previously typed (but not yet read) input.
                 This sequence is sent as TCP urgent data (and
                 may not work if the remote system is a 4.2 BSD
                 system -- if it doesn't work, a lower case r
                 may be echoed on the terminal).
            brk
                 Sends the TELNET BRK (Break) sequence, which
                 may have significance to the remote system.
            ip
                 Sends the TELNET IP (Interrupt Process)
                 sequence, which should cause the remote system
                 to abort the currently running process.
            ao
                 Sends the TELNET AO (Abort Output) sequence,
                 which should cause the remote system to flush
                 all output from the remote system to the
                 user's terminal.
            ayt
                 Sends the TELNET AYT (Are You There) sequence,
                 to which the remote system may or may not
                 choose to respond.
            ec
                 Sends the TELNET EC (Erase Character)
                 sequence, which should cause the remote system
                 to erase the last character entered.
            el
                 Sends the TELNET EL (Erase Line) sequence,
                 which should cause the remote system to erase
                 the line currently being entered.
            ga
                 Sends the TELNET GA (Go Ahead) sequence, which
                 likely has no significance to the remote
                 system.
            nop
                 Sends the TELNET NOP (No operation) sequence.
            ?
                 Prints out help information for the send
                 command.
   set argument value
            Set any one of a number of telnet variables to a
            specific value.  The special value off turns off
            the function associated with the variable.  The
            values of variables may be interrogated with the
            display command.  The variables which may be
            specified are:
            echo
                 This is the value (initially ^E) which, when
                 in line by line mode, toggles between doing
                 local echoing of entered characters (for
                 normal processing), and suppressing echoing of
                 entered characters (for entering, say, a
                 password).
            escape
                 This is the telnet escape character (initially
                 ^[) which causes entry into telnet command
                 mode (when connected to a remote system).
            interrupt
                 If telnet is in localchars mode (see toggle
                 localchars below) and the interrupt character
                 is typed, a TELNET IP sequence (see send ip
                 above) is sent to the remote host.  The
                 initial value for the interrupt character is
                 taken to be the terminal's intr character.
            quit
                 If telnet is in localchars mode (see toggle
                 localchars below) and the quit character is
                 typed, a TELNET BRK sequence (see send brk
                 above) is sent to the remote host.  The
                 initial value for the quit character is taken
                 to be the terminal's quit character.
            flushoutput
                 If telnet is in localchars mode (see toggle
                 localchars below) and the flushoutput
                 character is typed, a TELNET AO sequence (see
                 send ao above) is sent to the remote host.
                 The initial value for the flush character is
                 taken to be the terminal's flush character.
            erase
                 If telnet is in localchars mode (see toggle
                 localchars below), and if telnet is operating
                 in character at a time mode, then when this
                 character is typed, a TELNET EC sequence (see
                 send ec above) is sent to the remote system.
                 The initial value for the erase character is
                 taken to be the terminal's erase character.
            kill
                 If telnet is in localchars mode (see toggle
                 localchars below), and if telnet is operating
                 in character at a time mode, then when this
                 character is typed, a TELNET EL sequence (see
                 send el above) is sent to the remote system.
                 The initial value for the kill character is
                 taken to be the terminal's kill character.
            eof
                 If telnet is operating in line by line mode,
                 entering this character as the first character
                 on a line will cause this character to be sent
                 to the remote system.  The initial value of
                 the eof character is taken to be the
                 terminal's eof character.
   toggle arguments ...
            Toggle (between TRUE and FALSE) various flags that
            control how telnet responds to events.  More than
            one argument may be specified.  The state of these
            flags may be interrogated with the display command.
            Valid arguments are:
            localchars
                 If this is TRUE, then the flush, interrupt,
                 quit, erase, and kill characters (see set
                 above) are recognized locally, and transformed
                 into (hopefully) appropriate TELNET control
                 sequences (respectively ao, ip, brk, ec, and
                 el; see send above).  The initial value for
                 this toggle is TRUE in line by line mode, and
                 FALSE in character at a time mode.
            autoflush
                 If autoflush and localchars are both TRUE,
                 then when the ao, intr, or quit characters are
                 recognized (and transformed into TELNET
                 sequences; see set above for details), telnet
                 refuses to display any data on the user's
                 terminal until the remote system acknowledges
                 (via a TELNET Timing Mark option) that it has
                 processed those TELNET sequences.  The initial
                 value for this toggle is TRUE if the terminal
                 user had not done an stty noflsh, otherwise
                 FALSE (see stty(1)).
            autosynch
                 If autosynch and localchars are both TRUE,
                 then when either the intr or quit characters
                 is typed (see set above for descriptions of
                 the intr and quit characters), the resulting
                 TELNET sequence sent is followed by the TELNET
                 SYNCH sequence.  This procedure should cause
                 the remote system to begin throwing away all
                 previously typed input until both of the
                 TELNET sequences have been read and acted
                 upon.  The initial value of this toggle is
                 FALSE.
            crmod
                 Toggle carriage return mode.  When this mode
                 is enabled, most carriage return characters
                 received from the remote host will be mapped
                 into a carriage return followed by a line
                 feed.  This mode does not affect those
                 characters typed by the user, only those
                 received from the remote host.  This mode is
                 not very useful unless the remote host only
                 sends carriage return, but never line feed.
                 The initial value for this toggle is FALSE.
            debug
                 Toggles socket level debugging (useful only to
                 the super-user).  The initial value for this
                 toggle is FALSE.
            options
                 Toggles the display of some internal telnet
                 protocol processing (having to do with TELNET
                 options).  The initial value for this toggle
                 is FALSE.
            netdata
                 Toggles the display of all network data (in
                 hexadecimal format).  The initial value for
                 this toggle is FALSE.
            ?
                 Displays the legal toggle commands.

SEE ALSO

   csh(1), ksh(1), rlogin(1N).
   inet(3N), services(4), hosts(4) in the UMAX V Programmer's
   Reference Manual.
   telenetd(1M) in the UMAX V Administrator's Reference Manual.

BUGS

 There is no adequate way for dealing with flow control.
 On some remote systems, echo has to be turned off manually
 when in line by line mode.
 There is enough settable state to justify a .telnetrc file.
 No capability for a .telnetrc file is provided.
 In line by line mode, the terminal's eof character is only
 recognized (and sent to the remote system) when it is the
 first character on a line.

APPENDIX M: domax1 AND domax0 HARDWARE CONFIGURATION

                     ÚÄÄÄÄÄÄÄÄÄ¿
                     ³Cassette ³
                     ³  Drive  ³
                     ³         ³          ÚÄÄÄÄÄÄÄÄ¿  ÚÄÄÄÄÄÄÄÄ¿ 
                     ÀÄÄÄÄÂÄÄÄÄÙ          ³  Disk  ³  ³  Disk  ³ 
                          ³               ³  Drive ³  ³  Drive ³
                          ³               ³        ³  ³        ³ 

ÚÄÄÄÄÄÄÄÄ¿ ÚÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ÀÄÄÄÄÄÄÄÂÙ ÀÄÂÄÄÄÄÄÄÙ ³ Tape ÃÄÄÄÄÄÄÄÄÄÄÄÄ´ ÃÄÄÄÄÄÄÄÄÁÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄ ³ Drive ³ ³ ³ ÀÄÄÄÄÄÄÄÄÙ ³ 4 X 2 MIP ÃÄÄÄÄÄÄÄÄÁÄÄÄÄÄÁÄÄÄÄÄÁÄÄÄÄÄÁÄÄ ÚÄÄÄÄÄÄÄÄ¿ ³ ³ ³ Tape ³ ³ Multimax 310 ÃÄÄÄÄÄÄÄÄÁÄÄÄÄÄÁÄÄÄÄÄÁÄÄÄÄÄÁÄÄ ³ Drive ÃÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ ÀÄÄÄÄÄÄÄÄÙ ³ ÃÄÄÄÄÄÄÄÄÁÄÄÄÄÄÁÄÄÄÄÄÁÄÄÄÄÄÁÄÄ ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿

                    ÀÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÙ                                ³     Port     ³
                       ³            ³        ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿             ³   Selector   ³  
                       ³            ÃÄÄÄÄÄÄÄÄ´   Console    ³             ³              ³ 
                       ³       ÚÄÄÄÄÁÄÄÄÄÄÄ¿ ³   Hardcopy   ³             ÀÄÂÄÄÂÄÄÂÄÄÂÄÄÂÙ 
                       ³       ³  Console  ³ ³              ³               ³  ³  ³  ³  ³ 32 Lines
                       ³       ³           ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ             ÚÄÁÄÄÁÄÄÁÄÄÁÄÄÁ¿
                       ³       ³    CRT    ³                              ³              ³
                       ³       ÀÄÄÄÄÄÄÄÄÄÄÄÙ                              ³   Annex 01   ³
                       ³                                                  ³              ³
                       ³                                                  ÀÄÄÄÄÄÄÄÂÄÄÄÄÄÄÙ

Ethernet ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ

                                                              ÚÄÄÄÄÄÁÄÄÄÄÄ¿  
                                                              ³ Annex 00  ³  
                                                              ³           ³  
                                                              ÀÄÄÂÄÄÄÄÄÂÄÄÙ  
                                                        ÚÄÄÄÄÄÄÄÄÁÄ¿ ÚÄÁÄÄÄÄÄÄÄÄ¿
                                                        ³  mtlzr   ³ ³  mt_600  ³
                                                        ³          ³ ³          ³
                                                        ÀÄÄÄÄÄÄÄÄÄÄÙ ÀÄÄÄÄÄÄÄÄÄÄÙ        
                                          NOTES

ÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜ APPENDIX N: BASIC UNIX REVIEW

Write the letter(s) of the UNIX component that best fit each description.

K = Kernel S = Shell U = Utilities D = Directory

_ 1. Uses standard syntax for all commands.

_ 2. Schedules tasks and manages data storage.

_ 3. Memory resident code.

_ 4. Main interface between UNIX and users.

_ 5. Heart of the operating system.

_ 6. Can be easily combined to perform the exact

                   function which the user desires.

_ 7. Path name concept.

_ 8. Written mostly in the "C" programming language.

_ 9. Multi-level directory structure.

_ 10. Uses pipes and filters.

_ 11. Supports control structures.

_ 12. Includes text processing, electronic mail, file

                   manipulation, and program generation.
                                          NOTES

ÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜÜ

                                          INDEX

. (dot)……………………………………………………………………….63 .. (dot dot)…………………………………………………………………..63 Access modes…………………………………………………………………..37 Annex Commands

     call..............................................................................16
     hangup............................................................................21

BourneShell prompt………………………………………………………………6 BSD UNIX……………………………………………………………………….2 Current working directory……………………………………………………….63 Expiration period………………………………………………………………19 FTP Commands………………………………………………………………….108

     !................................................................................116
     ?................................................................................123
     cd...............................................................................119
     close............................................................................121
     get remote-file..................................................................113
     help.............................................................................123
     lcd..............................................................................115
     ls...............................................................................120
     open host........................................................................109
     Password.........................................................................110
     put..............................................................................117
     quit.............................................................................122
     status...........................................................................124

Kernel………………………………………………………………………..33 KornShell………………………………………………………………………2 Mailx Commands…………………………………………………………………74

     ?.................................................................................82
     d.................................................................................80
     S.............................................................................77, 78

MICOM…………………………………………………………………………14 Number links…………………………………………………………………..37 On-line manual pages……………………………………………………………25 Ownership and group affiliation………………………………………………….37 Parent………………………………………………………………………..64 Password………………………………………………………………………19 Pathname………………………………………………………………………57 PROCOMM+………………………………………………………………………14 Protections……………………………………………………………………34 Redirection………………………………………………………………..94, 95 Root directory………………………………………………………………….4 Scrolling……………………………………………………………………..10 Shell………………………………………………………………………….1 Standard input…………………………………………………………………93 Standard output………………………………………………………………..93 Subdirectory…………………………………………………………………..61 System V UNIX…………………………………………………………………..2 TAB………………………………………………………………………….153 TCP/IP……………………………………………………………………….107 Terminal nodes………………………………………………………………….3 UMAX………………………………………………………………………….19 UNIX Commands

     assist...........................................................................151
     cancel............................................................................48
     cat...............................................................................40
     cd................................................................................61
     chmod.............................................................................35
     cp............................................................................49, 50
     exit..............................................................................20
     file..............................................................................39
     lp................................................................................45
     lpstat............................................................................47
     ls................................................................................37
     mkdir.............................................................................58
     mv................................................................................62
     pg................................................................................42
     pwd...............................................................................57
     rmdir.............................................................................59
     tail..............................................................................43

UNIX filesystem…………………………………………………………………3 UNIX Keyboard Function Commands

     #..................................................................................9
     @..................................................................................9
     Ctrl-D............................................................................20
     Ctrl-Q............................................................................10
     Ctrl-S............................................................................10
     Delete............................................................................10
     Hold Screen.......................................................................10

UNIX Primer Plus………………………………………………………………153 vi Commands

     :!shell-cmd......................................................................147
     :q!..............................................................................145
     :r !shell-cmd....................................................................147
     :r filename......................................................................147
     :w...............................................................................145
     :w newfile.......................................................................147
     :wq..............................................................................146

Wildcards…………………………………………………………………….100 

/data/webs/external/dokuwiki/data/pages/archive/computers/begunix.txt · Last modified: 1999/09/29 13:51 by 127.0.0.1

Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki